Interfacial and Bulk Assembly of Anisotropic Gold Nanostructures: Implications for Photonics and Plasmonics
Abstract not provided
Kim, Hyeong Jin↗
SEARCH · Search NASA
Results for “glycolate”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Lamellar and Hexagonal Assemblies of PEG-Grafted Silver Nanoparticles: Implications for Plasmonics and Photonics
Assembly of silver nanoparticles (AgNPs) grafted with thiolated poly(ethylene glycol) (PEG-SH) with various molecular weights is reported. Synchrotron-based X-ray surface-sensitive diffraction methods are used to determine the nature of two-dimensional (2D) assemblies at liquid/vapor interfaces, and small-angle X-ray scattering (SAXS) is used to monitor the three-dimensional (3D) assemblies in bulk suspensions. We find that assembly can be induced either by the addition of K 2 CO 3 or polyacrylic acid (PAA) to the PEG-AgNP aqueous suspensions. The addition of K 2 CO 3 induces a 2D hexagonal structure at the liquid/vapor interface and a 3D hexagonal columnar structure in solutions, where the columns consist of tethered PEG-AgNP chains. On the other hand, the addition of PAA leads to the formation of a 2D lamella-like distorted hexagonal sheet at the liquid/vapor interface and a 3D lamellar superstructure formed by stacked 2D sheets in the PEG-AgNP suspension. Effects of the core type of nanoparticles on the assembly can be used to control structures for potential applications in plasmonics and photonics.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Ionic-like Superlattices by Charged Nanoparticles: A Step Toward Photonics Applications
Controlling interactions among nanoparticles is paramount to achieving assemblies vital to technologies seeking to exploit their cutting-edge collective properties. Although various techniques have been advanced, robust ones are necessary for upscaling nanoparticle assembly and crystallization. Here, we show that by grafting gold nanoparticles (AuNPs) with charge-end-group-thiolated poly(ethylene glycol), we control the charge of each AuNP. Such control facilitates the formation of various two-dimensional structures of oppositely charged binary constituents at vapor/liquid interfaces. Using surface-sensitive synchrotron X-ray diffraction techniques, we established the formation of distinct checkerboard square lattice structures at a range of pH values and molar ratios of the constituents. By regulating pH, the superlattices can transform from a square to a hexagonal lattice, or vice versa, and to a single-component superstructure at the interface. In conclusion, our recipe for the control of charges and their consequent interactions among nanoparticles can be readily exploited in the assembly of photonics and plasmonics devices in two and three dimensions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Gold Nanorod-Affibody Conjugates Mediate Cancer Photothermal Therapy under 808 nm LED Irradiation
Current HER2-targeted therapies including monoclonal antibodies, antibody-drug conjugates (ADCs) and small-molecule tyrosine kinase inhibitors face limitations such as hepatotoxicity, development of treatment resistance, and subsequent disease relapse. To overcome these challenges, this study combines the specificity of a HER2-targeting affibody molecule (Z HER2:2891 -Cys) with the photothermal properties of gold nanorods (AuNRs), forming bioconjugates (Affi–AuNRs) for selective treatment of HER2-positive cancer cells. Affi–AuNRs were fabricated via a two-step surface modification: (i) ligand exchange to displace cetyltrimethylammonium bromide (CTAB) with poly(ethylene glycol) methyl ether thiol (mPEG-SH), and (ii) covalent attachment of the affibody molecule via Au–S chemistry. Affi-AuNRs exhibited a photothermal conversion efficiency of 64 ± 5%, comparable to that of CTAB-stabilized AuNRs (59 ± 4%). Confocal microscopy confirmed that Affi-AuNRs are selectively internalized by HER2-positive SKOV-3 cells, with minimal uptake by HEK293T cells, which have low HER2 expression. Upon exposure to 808 nm near-infrared (NIR) LED irradiation (408 mW cm –2 , 15 min), Affi-AuNRs significantly reduced SKOV-3 cell viability by 85 ± 9% (p < 0.001) relative to untreated controls with no detectable cytotoxicity in HEK293T cells. These results demonstrate HER2-selective photothermal cytotoxicity mediated by Affi–AuNRs under defined 808 nm LED irradiation conditions, supporting their continued development as nanotheranostic tools that integrate affibody-mediated specificity with plasmonic heating.
36 MATERIALS SCIENCE↗
Two-Step Thermoresponsive Ultrafiltration Membranes from Polymerization of Lyotropic Liquid Crystals
Here, in this study, we present the fabrication of a two-step thermoresponsive ultrafiltration (UF) membrane through polymerization of a lyotropic liquid crystal (LLC). A mixture of commercially available Pluronic F 127 block copolymer, water (containing ammonium persulfate as the initiator), and polymerizable oil (n-butyl acrylate/ethylene glycol dimethacrylate) is used to create an LLC with a lamellar structure, as characterized by cross-polarized light microscopy and atomic force microscopy. Differential scanning calorimetry is employed to evaluate the thermoresponsive behavior of the polymerized LLC (polyLLC). Two-step thermoresponsiveness (~35 and ~50 °C) of the polyLLC is observed due to the lower critical solution temperature (LCST) of F 127 and melting of the crystalline structure of the polyethylene oxide (PEO) chains of the F 127 surfactant. In the next step, the obtained mesophase is cast on a nonwoven polyester support sheet followed by thermal polymerization. The hydration capacity, water flux, water flux recovery after fouling, and molecular weight cutoff (MWCO) of the obtained membrane are evaluated at different temperatures to examine its thermoresponsiveness. The experimental results reveal that the UF membrane has a reversible thermoresponsive behavior at the LCST and PEO melting of polyLLC. Additionally, the cleaning efficiency of the fouled membrane can be enhanced by using its thermoresponsive behavior, resulting in an extended lifetime of the product. Furthermore, the MWCO of the membrane can be altered with temperature due to the pore size change with temperature stimulus.
36 MATERIALS SCIENCE↗
Aqueous-Based Polyimine Functionalization of Cellulose Nanofibrils for Effective Drying and Polymer Composite Reinforcement
Here a simple strategy was developed to synthesize polyimine-coated cellulose nanofibrils (CNF) for effective CNF drying and composite reinforcement. The polyimine was synthesized in an aqueous medium using a selective hydrophilic and hydrophobic component that forces the polyimine to precipitate, which prevents the reverse imine reaction. The polyimine coating allowed the CNF to be easily oven-dried while maintaining a fibrillar morphology to provide mechanical reinforcement in poly(ethylene terephthalate glycol) (PETG) composites. In comparison, poor mechanical performance and a heterogeneous fracture surface were observed when the coated CNF were incorporated into poly(l-lactide) (PLA) composites. It is hypothesized that intermolecular aromatic–aromatic interactions are formed at the interface between fibers and the polymer matrix in the PETG system, while no such phenomena occur in the PLA system. Overall, this facile strategy to produce modified, easily dried CNF can be adapted to produce polyimine-coated CNF with unique functionalities that are useful in a range of applications.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Polymer-Grafted Cellulose Nanofibrils with Enhanced Interfacial Compatibility for Stronger Poly(lactic acid) Composites
Cellulose nanofibrils (CNFs) are a promising reinforcement for biodegradable composite matrices such as poly(lactic acid) (PLA), but they require commercially scalable drying methods that preserve their fibrillar morphology along with improved interfacial interactions with polymer matrices. In this work, a water-based grafting-through polymerization scheme to modify CNFs improved spray drying behavior and reinforcement capacity in PLA composites. All polymer modifications yielded CNFs with a more fibrillar morphology after spray drying, increasing specific surface area by up to 490% compared to unmodified CNFs, values similar to conventional freeze drying. Polymer-grafted CNFs in PLA composites improved the tensile strength by 16% at 20 wt % loading and stiffness by 22% at a 10 wt % loading with two different graft-polymer chemistries compared to unmodified CNF composites. Surface energy heterogeneity measurements of the reinforcements and PLA matrix were employed to understand the improvements in composite properties. Polymer modifications lowered the total surface energy of the CNFs, and calculated ratios of work of adhesion to work of cohesion suggested improved interfacial compatibility for four of the modified CNFs with PLA. Rheological oscillatory shear studies of the composites correlated solid-like melt behavior, as demonstrated by storage moduli dominance, with higher tensile strength. Thermal analysis of the composites revealed that excessive plasticization by the poly(oligoethylene glycol methyl ether methacrylate)-grafted sample potentially offset mechanical property improvements imparted by the more fibrillar morphology. This work provides an opportunity for large-scale manufacturing of CNF/PLA composites via an entirely aqueous modification scheme and industrially relevant spray drying process.
36 MATERIALS SCIENCE↗
Sustainable Shape Memory Elastomers with Reduced Melt Viscosity and Enhanced Stiffness
Melt reactive processing of lignin with nitrile rubber is a promising approach to synthesizing shape memory materials. The strong intramolecular interactions in lignin macromolecular structures, caused by π–π stacking in aromatic rings and hydrogen bonding, often result in large phase separation or low miscibility with rubbers. In this study, we investigated the chemical and molecular characteristics, as well as the stiffness and complex viscosity, of modified kraft lignin melt-reacted with an acrylonitrile/butadiene copolymer containing 41% acrylonitrile (NBR41). To enhance the macromolecular compatibility of kraft lignin with NBR41, kraft lignin was cross-linked with poly(propylene glycol) diglycidyl ether (PPDE) and trimethylolpropane triglycidyl ether (TTE), both rich in epoxy reactive groups capable of forming chemical bonds with hydroxyl and carboxyl groups. Here, our findings demonstrate that the modification of kraft lignin with PPDE and TTE resulted in significantly increased stiffness of the composites. The elastic modulus of NBR41-Kraft lignin-PPDE and NBR41-Kraft lignin-TTE increased by 82 and 162%, respectively. Both the yield strength and Young’s modulus of these two samples showed dramatic improvements. Specifically, the yield strength and Young’s modulus of NBR41-Kraft lignin-TTE increased nearly 4 and 3-fold, respectively, compared to the control sample. Interestingly, despite significant improvements in mechanical properties, the viscosity of NBR41-Kraft lignin-PPDE was substantially lower than that of the control sample. At 210 °C and an angular frequency of 1 rad/s, the complex viscosity of NBR41-Kraft lignin was approximately 100.25 ± 4.77 kPa·s, while that of NBR41-Kraft lignin-PPDE was significantly lower at 56 ± 0.93 kPa·s. These findings were validated through Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic mechanical analysis, thermal characterization, rheological tests, and quasi-elastic neutron scattering techniques.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Evolved Gas Analysis–Mass Spectrometry Exposes Polymer Network Structures
Polymer network structures in epoxy thermosets play an important role in the final thermoset material properties. However, analytical characterization of these network structures is difficult due to their amorphous nature. In this work, the application of evolved gas analysis–mass spectrometry (EGA-MS) to characterize the polymer network structures of bisphenol A (BPA)-based thermosets is demonstrated. Analytical characterization of the polymer network structures is accomplished by monitoring the Product-Specific Kinetics (PSK) of BPA monomer formation during thermal degradation investigations. We relate observed differences in the activation energy (E a ) of BPA monomer formation to the local packing environment around the BPA monomer units within the polymer network. Variations in the local environment related to the polymer networks manifest qualitatively as broadening in the thermal profile of the BPA monomer evolution and quantitatively as changes in the activation energy (E a ). Three BPA thermoset formulations were investigated; two amine-cured thermoset with 4,4′-diaminodiphenylmethane (DDM) or poly(propylene glycol) bis(2-amino-propyl ether) (PPG400) and a homopolymerized thermoset via curing with Epikure 3253 catalyst (3253). Results revealed that the 3253 thermoset contained two distinct packing densities in the polymer network, while DDM and PPG400 thermosets had uniform distributions of packing densities. Results from the DDM thermoset revealed a gradually decreasing E a , while the apparent E a of PPG400 was consistent over the entire degradation. Furthermore, these differences in E a were concluded to stem from the flexibility of the corresponding polymer networks and the ability of the network components to rearrange and occupy formed voids. Due to the minimal sample required for analysis (100–200 μg), this EGA-MS technique has great potential for postproduction evaluation of composite parts to identify changes in the polymer networks from use and aging, which could signal compromised performance.
Degradation↗
Additive-Induced Morphology Change of Polymer Film Enables Enhanced Charge Mobility and Faster Organic Electrochemical Transistor Switching
Conjugated polymers (CPs) play an important role in organic electrochemical transistors (OECTs) for bioelectronics and related applications, where they serve as channel materials. Currently, most successful polymers for CPs are re-engineered from traditional CPs by replacing hydrophobic alkyl side chains with hydrophilic ethylene glycol or ionic groups. Frustratingly, the enhanced ion transport often compromises the charge mobility of the original CP. In this work, we present an additive-mediated method to construct a modified poly(3-hexylthiophene) (P3HT) film to enable efficient ion migration. The additive is designed with a cleavable diazo group that releases nitrogen and 2-methoxyethanol, a volatile compound, to alter the P3HT film morphology. OECTs based on the film exhibit improved response times. Interestingly, the process also enhances the crystallinity of P3HT, leading to higher hole mobility compared with pristine P3HT. This study proposes an in situ strategy to achieve the functionality of the OMIEC via morphological regulation, offering a promising route to simultaneously enhance both ion accessibility and charge mobility.
Organic polymers↗
Dithieno[3,2-c:3′,2′‑ h ][2,6]naphthyridine-4,9(5H,10H)-dione-Based Conjugated Polymers for High Stable n‑Type Organic Electrochemical Transistors
Amide/imide-based conjugated polymers have been utilized as n-type OECT materials and have demonstrated promising device performance. However, their performance remains insufficient in terms of both efficiency and stability, which limits their practical applications. The development of conjugated polymers based on amide and imide groups represents a promising approach to address this issue. Here, in this study, we introduced dithieno[3,2-c:3′,2′-h][2,6]naphthyridine-4,9(5H,10H)-dione (TVTDA) into the design of the OECT materials for the first time. By copolymerizing it with (E)-2,2′-(ethene-1,2-diyl)bis(thiophene-3-carbonitrile), we prepared two polymers, TVTDA-2CNTVT-ST and TVTDA-2CNTVT-BR, which contain linear or branched ethylene glycol side chains, respectively. OECT devices based on these polymers demonstrate n-type charge transport characteristics, achieving promising μC* values of 7.17 and 26.5 F cm –1 V –1 s –1 for TVTDA-2CNTVT-ST and TVTDA-2CNTVT-BR, respectively. The higher electron mobility and μC* of TVTDA-2CNTVT-BR can be attributed to its mixed edge-on and face-on stacking mode, larger crystalline coherence length, and larger domain size in the thin film. To our delight, the OECT devices based on both polymers exhibit good operational stability after operating in an aqueous solution for 2000 s, with current retention rates exceeding 93%, representing the high level among the OECT devices based on amide/imide-conjugated polymers. Our study demonstrates that the TVTDA unit holds great potential for constructing high-performance n-type OECT materials.
36 MATERIALS SCIENCE↗
Mechanism of Chlorine-Mediated Electrochemical Ethylene Oxidation in Saline Water
Chlorine as a redox mediator allows for the selective oxidation of ethylene to 2-chloroethanol, which converts to ethylene oxide in alkaline aqueous electrolyte. This strategy utilizes abundant saline water as an electrolyte and source of oxygen atoms for functionalization. We present a mechanistic study of ethylene oxidation in saline water using cobalt oxide nanoparticle catalysts. Electrochemical kinetic analysis and in situ X-ray absorption spectroscopy suggest that the resting state of the catalyst and the rate-determining step differ for the chlorine evolution reaction in the presence and absence of ethylene. In 0.6 M NaCl pH 8 electrolyte, which resembles seawater, the average current density was ~60 mA/cm 2 with a Faradaic efficiency of ~41% toward ethylene functionalization. The use of synthetic and natural seawater achieved Faradaic efficiencies above 70%, while the partial current toward the product remained invariant. Further conversion of the initial product 2-chloroethanol into ethylene glycol was also demonstrated. Here, we present a broader vision of harnessing saline water in electrochemical functionalization of organic molecules and coproduction of hydrogen.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Confinement Reconstruction Unlocks Stable Ru Single Atom-Doped IrO x Anodes for Long-Term High-Rate CO 2 Electrolysis
IrO 2 is a commonly employed anode catalyst for CO 2 electrolysis in membrane electrode assembly (MEA) systems. However, under high current densities, its structural reconstruction leads to activity loss and stability degradation, limiting the industrial viability of CO 2 electrolysis. In this work, we demonstrated a confinement reconstruction strategy to precisely regulate the structural evolution during electrolysis. Ethylene glycol serves as a structural modulator, protecting the catalyst surface, suppressing soluble species formation, and promoting ordered structural evolution. Single-atom Ru acts as a stability enhancer, forming robust Ir–O–Ru bridging structures that facilitate an ordered transformation from a 4-fold [RuO 4 ]/[IrO 4 ] to a 6-fold symmetry [RuO 6 ]/[IrO 6 ] octahedral framework, thereby enhancing structural rigidity and long-term stability. As a result, in MEA-based CO 2 electrolysis, the catalyst achieves a stable operation at 200 mA cm –2 for 480 h, maintaining a CO selectivity above 80%. Theoretical calculations further elucidate that the enhanced stability originates from the suppression of oxygen vacancy formation, making the lattice-oxygen-mediated mechanism (LOM) potentially less favorable. This work provides insights into the structural evolution of the OER catalysts under high-current-density conditions, paving the way for large-scale CO 2 electrolysis commercialization.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Metallic Pd–Cu Alloy Phases Drive Selective Heterogeneous Electrochemical Ketonization of 1-Butene
Electrification of 2-butanone synthesis via ketonization of 1-butene offers a viable pathway to reduce emissions associated with its production as a commodity chemical and enhance its prospects as a clean carbon-based synthetic fuel. However, the direct electrochemical ketonization of alkenes remains underexplored, with previous studies largely limited to epoxides and glycols. Herein, we report an electrochemical heterogeneous system optimized for 1-butene ketonization, converting 1-butene to 2- butanone using a bimetallic PdCu catalyst in aqueous electrolytes. The system achieves a Faradaic efficiency of 20% and a partial current density of 0.6 mA/cm 2 at 1.8 V RHE . In comparison to monometallic Pd and oxidized PdCu analogs, the PdCu catalyst doubles the ketonization Faradaic efficiency and quadruples the production rate. Postelectrolysis characterization reveals that PdCu preserves the surface metallic alloy phase under anodic polarization, which likely accounts for the enhanced ketonization activity. This work demonstrates the significance of the Pd−Cu speciation dynamics and provides a framework for designing selective electrocatalysts for alkene ketonization.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Kinetics Measurements in Resistive Electrolytes Using Ring-Disk Electrode: Ring as Current “Shield” Enables Uniform Disk Current Distribution
Rotating disk electrodes are commonly used for electrochemical kinetics measurements. A major disadvantage of these types of electrodes is their nonuniform secondary current distribution, especially when performing electroanalytical measurements in resistive electrolytes. Such nonuniform current distribution can render the values of kinetics constants extracted from the disk electrode to be highly inaccurate. Furthermore, one emerging class of electrolytes that suffer from low ionic conductivities is deep eutectic solvents (DES). DES are a promising class of electrolytes for various emerging applications; however, due to their resistive nature, the secondary current distribution when using them is typically highly nonuniform. For example, the Wagner number when measuring Cu²⁺/Cu⁺ kinetics in choline chloride–ethylene glycol DES (1:4 molar ratio of ChCl:EG) is very low (<0.1), indicating highly nonuniform current distribution over the disk electrode. We show here that the Cu²⁺/Cu⁺ exchange current density measured using disk electrodes is very inaccurate due to the aforementioned nonuniform current distribution. To obtain uniform disk current distribution, we employ here a coplanar concentric rotating ring-disk electrode (RRDE), where the ring serves the function of a current “shield.” Specifically, we show using modeling that the ring minimizes the current distribution nonuniformity at the disk by effectively shielding the disk against current spikes near the disk edge. This enables improved precision in electrode kinetics measurements for the Cu²⁺/Cu⁺ couple in resistive DES. To enable broad applicability of this technique, an analytical expression based on the Wagner number is integrated into an iterative algorithm to help users identify ring conditions to achieve uniform current distribution and thus improved electroanalytics at the disk.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Operando Optical Microscopy for Visualization of Dendrite Growth in an Argyrodite LPSCl–Polymer Composite Electrolyte
Herein, we demonstrate the utility of optical microscopy as an accessible technique for the in situ visualization of dendrite growth within polymer–sulfide composite solid-state electrolytes. The composite electrolyte features in situ polymerization and cross-linking of the polymer between ceramic particles, which opens up extensive opportunities for accelerated materials discovery, given the vast array of acrylate/methacrylate monomers available. Specifically, the cross-linked polymer poly(triethylene glycol dimethacrylate) (poly(TEGDMA)) was observed to effectively fill pores and inhibit dendrite growth at the lithium metal interface, attributed to its glassy state at room temperature. This work represents the first application of optical microscopy to illustrate that the incorporation of glassy, undoped polymers such as poly(TEGDMA) can serve as a viable strategy for dendrite suppression in solid-state composite electrolytes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Surface Charge Predicts the Presence of Cation Effects in Electrocatalysis
The identity of electrolyte cations has an important influence on the rates of many electrocatalytic reactions, but these effects are not always observed. Recently, we found that the surface charge of the catalyst, quantified by the potential of zero total charge (PZTC), is a useful heuristic for predicting when cation effects will be observed for the oxygen reduction reaction (ORR). Here, we demonstrate that this descriptor allows us to rationalize the observation or absence of cation effects across a range of conditions, reactions (the hydrogen evolution reaction, the ORR, methanol oxidation, ethylene glycol oxidation, glycerol oxidation, and glucose reduction) and metal surfaces (Pt, Pd, Ag, and Au). These results suggest that when the reaction’s operating potential is negative of the metal’s PZTC, electrolyte cations accumulate at the catalyst surface and influence reaction rates. As a result, when reactions occur positive of the PZTC, cation effects are not observed.
Cations↗
Membrane Bioreactor Pretreatment of High-Salinity O&G Produced Water
Produced water (PW) from oil and gas production contains variable constituents that are difficult to remove with conventional treatment processes. The focus of this study was to explore the long-term performance of a membrane bioreactor (MBR) for the removal of organic constituents from PW and how performance and microbial community composition are affected by progressively increasing salinity and introduction of PW from different shale basins around the United States. Dissolved organic carbon removal from the PW remained consistent throughout the study, averaging 86% from the Denver-Julesburg basin PW and 66% removal from the Permian basin PW. Surfactant removal was less consistent, showing 87% removal of poly(ethylene glycols) (PEGs) at a total dissolved solid (TDS) concentration of 40 g/L but only 58% removal at a TDS concentration of 100 g/L. Diversity in the microbial community decreased during reactor establishment but increased at TDS concentrations above 80 g/L. Finally, the results of this study suggest that MBRs can be effective PW pretreatment processes even at high salinities.
42 ENGINEERING↗