Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Anodic Hydrogen Generation from Benzaldehyde on Au, Ag, and Cu: Rotating Ring-Disk Electrode Studies

Aldehydes are selectively oxidized to carboxylates on group 11 metals at low potentials (<0.4 V vs. RHE) in alkaline media. This process can occur by a pathway that generates H 2 gas from the aldehyde, known as electro-oxidative dehydrogenation (EOD) or anodic hydrogen production. The EOD process occurs with transfer of only one electron per aldehyde, whereas typical oxidation with discharge of hydrogen to form water is a two-electron process. Here, we study the catalytic activity and selectivity toward H 2 of Au, Ag, and Cu electrodes using benzaldehyde with rotating disk and ring-disk electrode (RDE/RRDE) techniques. The average number of electrons per benzaldehyde molecule obtained via H 2 detection by RRDE agrees with that obtained via Koutecký-Levich analysis conducted at various rotation rates. We find that Au and Ag have much higher H 2 and benzoate formation rates than Cu, but that Cu can perform the reaction at about 0.2 V lower overpotentials. On all three materials, benzaldehyde oxidation has high selectivity to anodic H 2 (one-electron pathway) below ∼0.5 V vs. RHE, but, with increasing potential, the selectivity shifts to H-oxidation forming water (two-electron pathway).

Ramos, Nathanael C. (ORCID:0000000247210350)↗
DOE OSTI2025

Single-atom molybdenum doping induces nickel oxide-to-hydroxide transformation for enhanced alkaline hydrogen evolution

NiMoO x compounds are widely regarded as among the most efficient non-noble metal catalysts for the hydrogen evolution reaction (HER). Nevertheless, understanding the structural evolution under in situ conditions and further enhancing their performance remain key challenges. Herein, we report that single-atom Mo doping in NiO significantly enhances its HER activity, reducing the overpotential to 131 mV at 10 mA cm −2 compared to undoped NiO. In situ X-ray absorption spectroscopy and Raman spectroscopy reveal that under catalytic conditions, Mo single atoms remain structurally stable, while Ni 2+ species in NiO are converted to Ni(OH) 2 in alkaline media under the applied working potential for HER. Notably, this transformation is absent in undoped NiO, indicating that Mo doping promotes the formation of active Ni(OH) 2 sites, which, in turn, accelerate the rate-limiting water dissociation step. These findings provide critical mechanistic insights into the structural evolution of NiMoO x during alkaline HER and highlight the importance of in situ studies in the development of highly efficient catalysts.

58 GEOSCIENCES↗
DOE OSTI2022

Replication Data for: Hydrogen migration at restructuring palladium-silver oxide boundaries dramatically enhances reduction rate of silver oxide

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Development and Application of Microfabricated Chemical Gas Sensors For Aerospace Applications

Aerospace applications require the development of chemical sensors with capabilities beyond those of commercially available sensors. In particular, factors such as minimal sensor size, weight, and power consumption are particularly important. Development areas which have potential aerospace applications include launch vehicle leak detection, engine health monitoring and control, and fire detection. Sensor development for these applications is based on progress in three types of technology: 1) Micromachining and microfabrication (Microsystem) technology to fabricate miniaturized sensors. 2) The use of nanocrystalline materials to develop sensors with improved stability combined with higher sensitivity. 3) The development of high temperature semiconductors, especially silicon carbide. Sensor development for each application involves its own challenges in the fields of materials science and fabrication technology. This paper discusses the needs of space applications and the point-contact sensor technology being developed to address these needs. Sensors to measure hydrogen, hydrocarbons, nitrogen oxides (Nox, carbon monoxide, oxygen, and carbon dioxide are being developed. A description is given of each sensor type and its present stage of development. Demonstration and application these sensor technologies will be described. The demonstrations range from use of a microsystem based hydrogen sensor on the Shuttle to engine demonstration of a nanocrystalline based sensor for NO, detection. It is concluded that microfabricated sensor technology has significant potential for use in a range of aerospace applications.

Hunter, G. W.↗
DOE OSTI2024

Decarbonizing Hydrogen Production: Assessing A Net-Negative Pathway

Hydrogen is gaining prominence as a key factor in the world's transition to a cleaner energy future. The International Energy Agency (IEA)'s Global Hydrogen Review 2023 reports that the number of low-emission hydrogen production projects is increasing rapidly. The potential for growth in new applications such as heavy industry, transportation, and power generation is significant. The IEA urges more decisive action to spur demand for low-emission hydrogen to achieve climate goals. While hydrogen is produced through various industrial methods, each with its own advantages and disadvantages, low-carbon hydrogen is critical for mitigating climate change and is incentivized by the Clean Hydrogen Production Tax Credit (45V). To this end, we have evaluated a commercial technology that can produce low- or negative-carbon hydrogen via ethanol catalytic oxidative reforming. This study assessed life cycle greenhouse gas emissions (carbon intensity or CI) associated with the hydrogen production technology. A total of 24 scenarios were evaluated, encompassing (a) Gen1 versus Gen2 ethanol inputs, (b) carbon capture and sequestration (CCS) of upstream fermentation CO2, and (c) oxygen sourcing via air separation unit (ASU) versus purchased or on-site production of oxygen as a byproduct of hydrogen electrolysis with a proton exchange membrane (PEM). Key findings include that the base case CI for hydrogen production using Gen2 ethanol from corn stover is lower than Gen1 dry mill corn ethanol. The study also points out that the CI for hydrogen production using PEM-O2 is lower than that using ASU-O2, whether the PEM-O2 is produced on-site or off-site (importing). When sourcing oxygen from on-site PEM-O2, the Gen1 and Gen2 ethanol-derived hydrogen exhibit favorable net-negative CI values for all evaluated scenarios, especially if the upstream ethanol CCS is included. As a reference, the 45V regulatory threshold for generating clean hydrogen tax credits is a CI below 0.45 kg CO2e/kg hydrogen.

BIOMASS FUELS,HYDROGEN↗
DOE OSTI2022

Characterizing Sustained Solar-to-Hydrogen Electrocatalysis at Low Cell Potentials Enabled by Crude Glycerol Oxidation

Unassisted solar-driven water electrolysis as a sustainable source for H 2 is limited by the high overpotential necessary to drive the oxygen evolution reaction (OER). Crude glycerol is an extremely alkaline byproduct of biodiesel synthesis that can be valorized or refined to produce more desirable chemicals. Glycerol can also be directly oxidized on an anode, replacing water oxidation, to reduce the applied cell potential requirements of electrolytic H 2 production or CO 2 reduction. An advantage of oxidizing glycerol in its crude form is the opportunity to valorize it without initial refinement. We describe an approach to replace the OER half-reaction with the sacrificial crude glycerol electrooxidation on a layered Au–Pt–Bi electrocatalyst on a Ni substrate. Compared to compositions with fewer components, the AuPtBi–Ni electrocatalyst improved the duration of performance and reduced the overall cell potential for glycerol electrooxidation in the extreme alkaline solutions representative of crude glycerol. These enhancements facilitated extended, unassisted hydrogen evolution from crude glycerol electrolysis, even under the power of a single-junction silicon solar cell at less than 1 sun illumination. We characterized the oxidation products of crude glycerol electrolysis and the subsequent products formed spontaneously in the electrolyte in the highly alkaline solution. This analysis helps to both identify the stoichiometric limits of glycerol oxidation at the low cell potentials of interest here and to understand the chemical control imparted by electrocatalysis on the ultimate compounds formed in the crude solution. Furthermore, the results for the AuPtBi electrocatalyst show that incorporating crude glycerol oxidation into integrated electrochemical systems can simultaneously simplify their design and significantly improve solar-to-hydrogen rates.

08 HYDROGEN↗
DOE OSTI2023

Reactive iron, not fungal community, drives organic carbon oxidation potential in floodplain soils

Wetlands host ∼20% of terrestrial organic carbon and serve as a major sink for atmospheric carbon. Anoxic soils and sediments accrue soil organic carbon (SOC) partly by hampering the activity of extracellular oxidative enzymes that break down phenolic polymers. Upon aeration, fungal-driven oxidative enzymatic depolymerization and microbial respiration of released monomers ensue. Redox-active metals can simultaneously catalyze abiotic nonspecific oxidation of SOC, notable examples including Mn(III) or Fe(II) through Fenton-like, hydrogen peroxide-catalyzed oxidative radical production. However, the extent of reactive metal contributions to biotic and abiotic SOC degradation is not understood in the context of natural environments with diverse redox chemistry. We tested the relative contributions of fungi, Mn(III) and Fe(II) to phenolic substrate (L-DOPA) oxidation in floodplain soils representing a range of transient redox conditions driven by permanent vs. periodic flooding. Phenol oxidative potential was highest in permanently flooded soils with fewer fungal taxa known for observed (per)oxidase activity and instead correlated with HCl-extractable Fe(II), Fe(total) and Fe(II)/Fe(total), suggesting a specific role of Fe(II). Fe(II) additions enhanced phenol oxidative potential in sterilized and non-sterilized soils in the presence of hydrogen peroxide, indicating abiotic Fe-mediated radical chemistry could significantly enhance wetland SOC oxidative depolymerization throughout redox-active floodplain soils. Fungal community composition did not correlate to phenol oxidative potential overall and only more oxic soils adjacent to the river with diverse fungal communities showed declining oxidative potential after sterilization. Mn(III) addition did not significantly enhance phenol oxidative potential across all soils, although it appeared to drive fungal-mediated oxidative potential in the most aerated floodplain soils. Understanding how metals mediate SOC depolymerization as abiotic oxidants or microbially-harnessed enzyme cofactors and substrates in soils under variable hydrologic controls will improve our ability to represent depolymerization in terrestrial carbon models in wetland and other frequently saturated soils.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Aging-associated stem/progenitor cell dysfunction in the salivary glands of mice

Highlights: • The function of CD133-positive cells changes with age and is expected to be one of the causative factors associated with salivary gland aging. Although stem cell aging leads to a decline in tissue homeostasis and regenerative capacity, it remains unclear whether salivary gland stem cell function changes during this process. However, the salivary glands are gradually replaced by connective tissue during aging. Here, we show a decline in the stem cell ability of CD133-positive stem/progenitor cells in the salivary glands of aged mice. The CD133-positive cells were isolated from young, adult, and aged mice. The number of CD133-positive cells was significantly decreased in aged mice. They also showed a lower sphere formation capacity compared to young and adult mice. RNA sequencing revealed that CD133-positive cells in aged mice exhibited lower gene expression of several aging-related genes, including FoxO3a, than those in young and adult mice. Salivary gland cells infected with a recombinant lentivirus encoding the FoxO3a gene showed a reduction in oxidative stress induced by hydrogen peroxide compared with those infected with a control virus. Thus, FoxO3a may inhibit stem cell aging via oxidative stress.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Formation of (Rh–Fe)–FeO x Complex Sites Enables Methanol Synthesis from CO 2

Here, we addressed the challenges of designing catalysts for selective CO 2 hydrogenation by incorporating oxide Fe species onto Rh nanoparticles. Nanoscopic FeO x domains created a “reverse catalyst” structure (i.e., a metal oxide supported on a metal) that increased the density of interfacial sites compared to traditional supported catalysts. The contact between the metal nanoparticle and the oxide overlayer induced the formation of a surface Rh-Fe alloy that stabilize methoxy groups while suppressing hydrogenolysis to methane. Sites at FeO x -metal interfaces interact with CO 2 sevenfold stronger than sites on metal surfaces, show larger energy barriers to cleave the C-O bonds, and offer a barrierless pathway for hydrogenation of methoxy species to methanol. Consequently, the multifunctional sites over FeO x /Rh-Fe catalysts highlight and meet the requirements of a selective methanol catalyst: strong interaction with CO 2 to ensure high density of transition states; metal sites to activate and make hydrogen available to surface intermediates; and high energy barriers for C-O bond cleavage to form carbides. These synthesis and catalytic chemistries, demonstrated for Rh-Fe-FeO x interfaces, enable us to overcome the limitations to the design of methanol production catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2002

C/sic Life Prediction for Propulsion Applications

Accurate life prediction is critical to successful use of ceramic matrix composites (CMC). The tools to accomplish this are immature and not oriented toward the behavior of carbon fiber reinforced silicon carbide (C/SiC), the primary system of interest for many reusable and single mission launch vehicle propulsion and airframe applications. This paper describes an approach and process made to satisfy the need to develop an integrated life prediction system that addresses mechanical durability and environmental degradation of C/SiC. Issues such as oxidation, steam and hydrogen effects on material behavior are discussed. Preliminary tests indicate that steam will aggressively remove SiC seal coat and matrix in line with past experience. The kinetics of water vapor reaction with carbon fibers is negligible at 600 C, but comparable to air attack at 1200 C. The mitigating effect of steam observed in fiber oxidation studies has also been observed in stress rupture tests. Detailed microscopy of oxidized specimens is being carried out to develop the oxidation model. Carbon oxidation kinetics are reaction controlled at intermediate temperatures and diffusion controlled at high temperatures (approximately 1000 C). Activation energies for T-300 and interface pyrolytic carbon were determined as key inputs to the oxidation model. Crack opening as a function of temperature and stress was calculated. Mechanical property tests to develop and verify the probabilistic life model are very encouraging except for residual strength prediction. Gage width is a key variable governing edge oxidation of seal coated specimens. Future efforts will include architectural effects, enhanced coatings, biaxial tests, and LCF. Modeling will need to account for combined effects.

Levine, Stanley R.↗
NASA NTRS2002

C/SIC Life Prediction for Propulsion Applications

Accurate life prediction is critical to successful use of ceramic matrix composites (CMC). The tools to accomplish this are immature and not oriented toward the behavior of carbon fiber reinforced silicon carbide (C/SiC), the primary system of interest for many reusable and single mission launch vehicle propulsion and airframe applications. This paper describes an approach and progress made to satisfy the need to develop an integrated life prediction system that addresses mechanical durability and environmental degradation of C/SiC. Issues such as oxidation, steam and hydrogen effects on material behavior are discussed. Preliminary tests indicate that stream will aggressively remove SiC seal coat and matrix in line with past experience. The kinetics of water vapor reaction with carbon fibers is negligible at 600 C, but comparable to air attack at 1200 C. The mitigating effect of steam observed in fiber oxidation studies has also been observed in stress rupture tests. Detailed microscopy of oxidized specimens is being carried out to develop the oxidation model. Carbon oxidation kinetics are reaction controlled at intermediate temperatures and diffusion controlled at high temperatures (approx. 1000 C). Activation energies for T-300 and interface pyrolytic carbon were determined as key inputs to the oxidation model. Crack opening as a function of temperature and stress was calculated. Mechanical property tests to develop and verify the probabilistic life model are very encouraging except for residual strength prediction. Gage width is a key variable governing edge oxidation of seal coated specimens. Future efforts will include architectural effects, enhanced coatings, biaxial tests, and LCF. Modeling will need to account for combined effects.

Levine, Stanley R.↗
NASA NTRS2009

Cyclic Oxidation Behavior of CuCrAl Cold-Sprayed Coatings for Reusable Launch Vehicles

The next generation of reusable launch vehicles is likely to use GRCop-84 [Cu-8(at.%)Cr-4%Nb] copper alloy combustion liners. The application of protective coatings on GRCop-84 liners can minimize or eliminate many of the environmental problems experienced by uncoated liners and significantly extend their operational lives and lower operational cost. A newly developed Cu- 23 (wt.%) Cr-5% Al (CuCrAl) coating, shown to resist hydrogen attack and oxidation in an as-cast form, is currently being considered as a protective coating for GRCop-84. The coating was deposited on GRCop-84 substrates by the cold spray deposition technique, where the CuCrAl was procured as gas-atomized powders. Cyclic oxidation tests were conducted between 773 and 1,073 K to characterize the coated substrates.

Raj, Sai↗
DOE OSTI2021

A Donor–Acceptor [2]Catenane for Visible Light Photocatalysis

Colored charge-transfer complexes can be formed by the association between electron-rich donor and electron-deficient acceptor molecules, bringing about the narrowing of HOMO–LUMO energy gaps so that they become capable of harnessing visible light. In an effort to facilitate the use of these widespread, but nonetheless weak, interactions for visible light photocatalysis, it is important to render the interactions strong and robust. Furthermore, we employ a well-known donor–acceptor [2]catenane—formed by the mechanical interlocking of cyclobis(paraquat-p-phenylene) and 1,5-dinaphtho[38]crown-10—in which the charge-transfer interactions between two 4,4'-bipyridinium and two 1,5-dioxynaphthalene units are enhanced by mechanical bonding, leading to increased absorption of visible light, even at low concentrations in solution. As a result, since this [2]catenane can generate persistent bipyridinium radical cations under continuous visible-light irradiation without the need for additional photosensitizers, it can display good catalytic activity in both photo-reductions and -oxidations, as demonstrated by hydrogen production—in the presence of platinum nanoparticles—and aerobic oxidation of organic sulfides, such as l-methionine, respectively. This research, which highlights the usefulness of nanoconfinement present in mechanically interlocked molecules for the reinforcement of weak interactions, can not only expand the potential of charge-transfer interactions in solar energy conversion and synthetic photocatalysis but also open up new possibilities for the development of active artificial molecular shuttles, switches, and machines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗