Search NASA⌕ Search

SEARCH · Search NASA

Results for “intersectionality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Flow-field surveys on the windward side of the NASA 040A space shuttle orbiter at 31 deg angle of attack and Mach 20 in helium

Pitot pressure and flow angle distributions in the windward flow field of the NASA 040A space shuttle orbiter configuration and surface pressures were measured, at a Mach number of 20 and an angle of attack of 31 deg. The free stream Reynolds number, based on model length, was 5.39 x 10 to the 6th power. Results show that cores of high pitot pressure, which are related to the body-shock-wing-shock intersections, occur on the windward plane of symmetry in the vicinity of the wing-body junction and near midspan on the wing. Theoretical estimates of the flow field pitot pressures show that conical flow values for the windward plane of symmetry surface are representative of the average level over the entire lower surface.

Ashby, G. C., Jr.↗
NASA NTRS1976

Condensation of water vapor in rarefaction waves. I - Homogeneous nucleation

A detailed theoretical investigation has been made of the condensation of water vapor/carrier gas mixtures in the nonstationary rarefaction wave generated in a shock tube. It is assumed that condensation takes place by homogeneous nucleation. The equations of motion together with the nucleation rate and the droplet growth equations were solved numerically by the method of characteristics and Lax's method of implicit artificial viscosity. It is found that, for the case considered, the condensation wave formed by the collapse of the metastable nonequilibrium state is followed by a shock wave generated by the intersection of characteristics of the same family. The expansion is practically isentropic up to the onset of condensation. The condensation front accelerates in the x,t plane. The results of the computations for a chosen case of water vapor/nitrogen mixture are presented by plotting variations of pressure, nucleation rate, number density of critical clusters, and condensate mass-fraction along three particle paths. Some consideration is given to homogeneous condensation experiments conducted in a shock tube. Although a direct comparison of the present theoretical work and these experiments is not possible, several worthwhile interpretative features have resulted nevertheless.

Sislian, J. P.↗
NASA NTRS1977

Unsteady supersonic aerodynamic theory by the method of potential gradient

A generalized solution of the hyperbolic wave equation has been derived. The method used has been further developed to relate the velocity components at a field point to the potential gradient distribution in the dependence domain. Singular integrals have been evaluated in closed form, while numerical integration methods are suggested for treating more complex but analytic functions. Idealization of the lifting surfaces by trapezoidal elements with two sides parallel to the streamlines is computationally efficient because line integrations along the other two sides need only be considered. Furthermore, all the integrands vanish on the Mach cone and the need for determining the hyperbolic curves of intersection of the cone with the lifting surface is avoided. Generalized aerodynamic coefficients for three AGARD planforms have been calculated and compared with the available results.

Jones, W. P.↗
NASA NTRS1977

Scattering from a moving spherical particle by two crossed coherent plane waves

The Mie scattering properties of a homogeneous, isotropic spherical particle, moving at a constant velocity and illuminated by two intersecting coherent plane waves having the same polarization direction, have been analyzed based upon an exact solution to Maxwell's equations. The solutions are in a form suitable for the calculation of the time varying scattered signal integrated across a detector aperture of variable size that is centered on either the forward or backward scattering direction. This problem is of importance in defining the scattered signal in a cross beam laser Doppler velocimeter (LDV). Results obtained from calculating the integrated scattered signal indicate a strong dependence upon the following physical parameters: particle size, index of refraction, cross beam angle, and collection solid angle.

Chu, W. P.↗
NASA NTRS1976

Lunar surface remanent magnetic fields detected by the electron reflection method

We present maps of the lunar surface remanent magnetic fields detected by the electron reflection method. These maps provide substantial coverage of the latitude band from 30 N southward to 30 S with a resolution of about 40 km and a sensitivity of about 0.2 gamma at the lunar surface. Regions of remanent magnetization are observed ranging in size from the resolution limit of 1.25 deg to above approximately 60 deg. The largest contiguous region fills the Big Backside Basin where it is intersected by the spacecraft orbital tracks. Preliminary analyses of the maps show that the source regions of lunar limb compressions correspond to regions of strong surface magnetism, and that there does not appear to be sharply discontinuous magnetization at the edges of maria. We also analyze the electron reflection observations to obtain information on the direction and distribution of magnetization in the Van de Graaff anomaly region.

Lin, R. P.↗
NASA NTRS1977

Wear formulation for aircraft brake material sliding against steel

Predictions of wear on contemporary copper-based brake material sliding against 17-22 AS grade steel, wear testing equipment, formulation of wear, and test results are discussed. An initial investigation of worn surfaces of the brake material and a mating steel rotor was carried out. A wear model proposed suggests initiation of cracks at a hard particle inclusion site in the surface layer of the brake material; crack propagation allows particles to be removed by intersection of cracks. Mutual relations between sliding variables, load, time, hardness, and surface temperature are studied. Empirical formulas are exhibited.

Ho, T. L.↗
NASA NTRS1977

Flight boundary layer transition measurements on a slender cone at Mach 20

Experimental flight boundary layer transition data have been obtained on a 3.962-m-long, 5 deg half-angle cone with an initial nose radius of 0.254 cm. The data were obtained during re-entry from altitudes of approximately 30.480 to 18.288 km at a free-stream Mach number of 20. The free-stream Reynolds number varied from 6.56 x 10 to the 6th/m to 52.5 x 10 to the 6th/m, and the total enthalpy from about 18.3 to 16.9 MJ/kg. The locations of the beginning and end of transition were determined by the intersection of curves faired throug the laminar, transitional, and turbulent heating-rate data. The temperature-history technique for determining transition as currently used (sharp break in curve) was shown to compare unfavorably with the heating-rate-distribution method. The heating-rate-history technique, which is proportional to the temperature derivative and consequently more sensitive to perturbations, gives better agreement with the heating-rate distribution transition results.

Wright, R. L.↗
NASA NTRS1976

Methods, advantages, and limitations of compositing photographic images

Basic procedures used in compositing photographic images to increase their information content are briefly discussed. A new method for calculating exposure time for each image is presented. A portion of the density coordinate of the characteristic curve of the film on which the exposures are to be made is divided into as many divisions as there are images to be superimposed. Lines are drawn from the intersections of these density increments with the characteristic curve to the log exposure for each image. A study of the ability of workers to superimpose plant images with a projected scale of one arcsec per millimeter has shown that image smearing due to alignment errors in a composite will not exceed about 0.15 arcseconds if images are composited by an adept operator.

Jones, S. E.↗
NASA NTRS1977

Load distribution on a close-coupled wing canard at transonic speeds

This paper reports on a wind-tunnel test where load distributions were obtained at transonic speeds on both the canard and wing surfaces of a closely-coupled wing-canard configuration. The investigation included detailed component and configuration arrangement studies to provide insight into the various aerodynamic interference effects for the leading-edge vortex flow conditions encountered. Data indicate that increasing the Mach number from 0.70 to 0.95 caused the wing leading-edge vortex to burst over the wing when the wing was in the presence of the high canard. For some of the outboard span locations, the leading-edge vortex reattachment streamline intersects the wing trailing edge inboard of these span locations, thus, the Kutta condition was not satisfied. In general, the effect of adding a canard was to reduce the lift inboard and somewhat increase the lift outboard similar to the trends that would have been expected had the flow been attached.

Gloss, B. B.↗
NASA NTRS1977

An investigation of the stability of the Bondi-Hoyle model of accretion flow

The Bondi-Hoyle-Lyttleton (1944) accretion model is considered which involves accretion onto a massive body moving at a high Mach number with respect to the ambient medium and the production of a high-density accretion column along the axis where particle orbits intersect. The stability of steady-state solutions with respect to short-wavelength perturbations is analyzed using the WKB approximation, and the accretion column is shown to be unstable toward such perturbations. It is noted that this instability is not affected by the position of the stagnation point in the steady-state solution.

Cowie, L. L.↗
NASA NTRS1977

Avoidance control

Dynamical systems were considered, subject to control by two agents, one of whom desires that no trajectory of the system, emanating from outside a given set, intersects the set no matter what the admissible actions of the other agent. Conditions are given whose satisfaction assures that a given control results in avoidance. Furthermore, these conditions are constructive in that they yield an avoidance feedback control. Some examples are presented.

Leitmann, G.↗
NASA NTRS1977

Evasion in the plane

Dynamic systems were considered subject to control by two agents, one of whom desires that no trajectory of the system emanating from outside a given set, intersects that set no matter what the admissible actions of the other agent. Constructive conditions sufficient to yield a feedback control for the agent seeking avoidance were employed to deduce an evader control for the planar pursuit-evasion problem with bounded normal accelerations.

Leitmann, G.↗
NASA NTRS1977

The Nimbus 6 data catalog. Volume 6: Data orbits 4339 through 5155

Satellite operations from launch through 14 July (orbit 425) consisted of engineering evaluation of all spacecraft systems. As a result of that effort, data reception, accountability and processing were intermittent during that period. During orbit 4905 (12 June), Nimbus 6 successfully completed one year operations. A summary of the documentation for each Nimbus 6 Data Catalog volume is presented. The pitch of the Nimbus 6 satellite has been made to alternate between +2.0 degrees, +0.6 degrees, and 0.0 degrees since launch. A positive pitch angle of 0.6 degrees moves the nadir-looking position 11.5 kilometers ahead of the subsatellite point. A positive pitch angle of 2.0 degrees moves the nadir-looking position 38.3 kilometers ahead of the subsatellite point. At these pitch angles, a scanner-type instrument no longer scans the earth along a great circle arc through the subpoint, but scans along the small circle formed by the intersection of the scan plane with the earth. Since the plane of the small circle is tilted with respect to the nominal scan plane, points on the arc are displaced farther from the great circle as the scan angle increases. As noted above, a pitch angle of 0.6 degrees causes a displacement of 11.5 kilometers at nadir, but when the scanner turns 45 degrees away from nadir the displacement increases slightly to 12.8 kilometers. Similarly, for a 2.0 degree pitch the displacement is 38.3 kilometers at nadir and increases to 42.6 kilometers at a 45 degree scan angle. Thus, although the instrument records in lines normal to the orbit plane (in the absence of yaw) the perpendicular displacement from the perfect-attitude scan line is not uniform across the scan line.

Source record↗
NASA NTRS1977

GEMPAK: An arbitrary aircraft geometry generator

A computer program, GEMPAK, has been developed to aid in the generation of detailed configuration geometry. The program was written to allow the user as much flexibility as possible in his choices of configurations and the detail of description desired and at the same time keep input requirements and program turnaround and cost to a minimum. The program consists of routines that generate fuselage and planar-surface (winglike) geometry and a routine that will determine the true intersection of all components with the fuselage. This paper describes the methods by which the various geometries are generated and provides input description with sample input and output. Also included are descriptions of the primary program variables and functions performed by the various routines. The FORTRAN program GEMPAK has been used extensively in conjunction with interfaces to several aerodynamic and plotting computer programs and has proven to be an effective aid in the preliminary design phase of aircraft configurations.

Stack, S. H.↗
NASA NTRS1978

Dynamic stall of an oscillating airfoil

Unsteady separated boundary layers and wakes were studied by investigating flow past an oscillating airfoil which in part models the retreating blade stall on the helicopters. The Navier-Stokes equations in terms of the vorticity and stream function for laminar flow were solved to determine the flow field around a modified NACA 0012 airfoil. After a fully developed flow was determined at zero incidence, the airfoil was oscillated in pitch through an angle of attack range from 0 deg to 20 deg. The computed streamlines during this pitch-up motion are in qualitative agreement with the trajectories of air bubbles observed in water tunnel experiments conducted with a NACA 0012 airfoil under the same conditions. During the pitch-down motion of the airfoil, the computed flow patterns cannot be compared with the experiments because the trajectories of air bubbles intersect.

Mehta, U. B.↗
NASA NTRS1978

Wake-shock interaction at a Mach number of 6

Measurements of mean pitot pressure, static pressure, and total temperature were made in the two dimensional turbulent mixing region of a wake downstream of an interaction with a shock-expansion wave system. The results indicated that: (1) the shock increased the mixing, and (2) the expansion field that followed the shock decreased the turbulent mixing. The overall effect of the shock-expansion wave interaction was dependent on the orientation of the expansion wave with respect to the intersecting shock wave. These data could be used to validate nonequilibrium turbulence modeling and numerical solution of the time averaged Navier-Stokes equations.

Walsh, M. J.↗
NASA NTRS1978

Dielectric constants of soils at microwave frequencies-2

The dielectric constants of several soil samples were measured at frequencies of 5 and 19 GHz using the infinite transmission line method. The results of these measurements are presented and discussed with respect to soil types and texture structures. A comparison is made with other measurements at 1.4 GHz. At all three frequencies, the dependence of dielectric constant on soil moisture can be approximated by two straight lines. At low moisture, the slope is less than at high moisture level. The intersection of the two lines is believed to be a function of soil texture.

Wang, J.↗
NASA NTRS1977

SUNSPOT: A computer program for producing optimal solar sail planetocentric trajectories

The input, output and subroutines, including listings, for the SUNSPOT code are described. SUNSPOT can calculate time optimal planetocentric trajectories including orbit-to-orbit transfer and orbit to a subescape point. Trajectories about the the four inner planets can be calculated, and shadowing, oblateness, and solar motion may be included. A penalty function may be included to prevent trajectories which intersect the planet's surface.

Sackett, L. L.↗