Search NASA⌕ Search

SEARCH · Search NASA

Results for “laser simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

The investigation of the optimal conditions thermal destruction of the microcapsules containing water by laser pulses

The particular qualities of formation of the optical field in the composite spherical particles–microcapsules consisting of a polymer absorbing shell and a non-absorbing liquid core are presented. The thickness of the shell and the coefficient of its own radiation absorption determine the nature of spatial distribution and amplitude characteristics of the absorbed power which are revealed by the numerical simulation. The variation of these parameters allows changing position and peak values of the areas the effective absorption volume of the particle. Therefore the conditions conducive for the opening shells in the appropriate spatial areas in order to liberate the contents of the microcapsules are ensured.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing nonlinear magnetization dynamics in Fe/MgO(001) film by all optical pump-probe technique

An all-optical pump-probe technique has been employed to investigate the nonlinear magnetization dynamics of a 10 nm Fe/MgO(001) thin film in time domain. The magnetization precession was excited by pump-laser pulses and modulated by laser fluence variations. With increasing the laser fluence up to 7.1 mJ/cm{sup 2}, in addition to the uniform precession mode, a second harmonic signal was detected. The time evolution of the second harmonic signal was obtained in time-frequency domain. Based on the Landau-Lifshitz-Gilbert equation, the numerical simulation was performed to reproduce the observed the frequency doubling behaviors in Fe/MgO(001) film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

STELLAR POPULATIONS IN THE CENTRAL 0.5 pc OF THE GALAXY. II. THE INITIAL MASS FUNCTION

The supermassive black hole at the center of the Milky Way plays host to a massive, young cluster that may have formed in one of the most inhospitable environments in the Galaxy. We present new measurements of the global properties of this cluster, including the initial mass function (IMF), age, and cluster mass. These results are based on Keck laser-guide-star adaptive optics observations used to identify the young stars and measure their Kp-band luminosity function as presented in Do et al. A Bayesian inference methodology is developed to simultaneously fit the global properties of the cluster utilizing the observations and extensive simulations of synthetic star clusters. We find that the slope of the mass function for this cluster is {alpha} = 1.7 {+-} 0.2, which is steeper than previously reported, but still flatter than the traditional Salpeter slope of 2.35. The age of the cluster is between 2.5 and 5.8 Myr with 95% confidence, which is a younger age than typically adopted but consistent within the uncertainties of past measurements. The exact age of the cluster is difficult to determine since our results show two distinct age solutions (3.9 Myr and 2.8 Myr) due to model degeneracies in the relative number of Wolf-Rayet and OB stars. The total cluster mass is between 14,000 and 37,000 M {sub Sun} above 1 M {sub Sun} and it is necessary to include multiple star systems in order to fit the observed luminosity function and the number of observed Wolf-Rayet stars. The new IMF slope measurement is now consistent with X-ray observations indicating a factor of 10 fewer X-ray emitting pre-main-sequence stars than expected when compared with a Salpeter IMF. The young cluster at the Galactic center is one of the few definitive examples of an IMF that deviates significantly from the near-universal IMFs found in the solar neighborhood.

79 ASTRONOMY AND ASTROPHYSICS↗

Time-Resolved PIV/PTV Measurements on Interior Subchannels of a Wire-Wrapped 61-pin Hexagonal Fuel Bundle

Liquid metal fast reactor fuel bundles using sodium as a coolant typically utilize a tightly packed triangular lattice of fuel pins enclosed in a hexagonal duct. Often, the fuel pins are helically wrapped with a wire spacer. The primary function of the wire spacers is to maintain a gap between adjacent fuel pins. They also enhance sub-channel mixing to increase convective heat transfer and mitigate vortex-induced vibration. Texas A and M University has conducted isothermal flow experiments in a wire-wrapped 61-pin hexagonal fuel bundle to support the research on advanced nuclear fuel development sponsored by the Department of Energy (DOE). These tests produced high spatial and temporal resolution measurements of the velocity field and pressure at different locations in the fuel bundle. The experimental facility employs matched-index-of-refraction (MIR) techniques and laser diagnostic velocity measurement techniques such as particle image velocimetry (PIV), particle tracking velocimetry (PTV), and laser Doppler velocimetry (LDV). The result of this experimental activity will be an experimental database of pressure and velocity field measurements that will be suitable for validating computational fluid dynamics (CFD) methods, such as Reynolds-averaged Navier-Stokes (RANS) and highly resolved large eddy simulation (LES). PIV results on the set of edge subchannels near the hexagonal duct have been presented in another paper. This paper presents PIV results on two sets of interior subchannels, defined as Interior- 1 and Center-2, at a Reynolds number (Re) of 19,000 in the turbulent regime.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Stability of the fcc phase in shocked nickel up to 332 GPa

Despite making up 5-20 wt.% of Earth’s predominantly iron core, the melting properties of elemental nickel at core conditions remain poorly understood, due largely to a dearth of experimental data. We present here an in situ X-ray diffraction study performed on laser shock-compressed samples of bulk nickel, reaching pressures up to ~ 500 GPa. Hugoniot states of nickel were targeted using a flat-top laser drive, with in situ X-ray diffraction data collected using the Linac Coherent Light Source. Rietveld methods were used to determine the densities of the shocked states from the measured diffraction data, while peak pressures were determined using a combination of measured particle velocities, shock transit times, hydrodynamic simulations, and laser intensity calibrations. We observed solid compressed face-centered cubic (fcc) Ni up to at least 332 ± 30 GPa along the Hugoniot—significantly higher than expected from the majority of melt lines that have been proposed for nickel. We also bracket the partial melting onset to between 377 ± 38 GPa and 486 ± 35 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phasing of multichannel laser radiation upon stimulated Brillouin scattering

We investigated the phasing of pulsed two- and fourchannel laser beams due to phase conjugation upon transient stimulated Brillouin scattering (SBS) in a double-pass amplification scheme. A high quality of beam phasing was experimentally demonstrated with the use of a microlens raster and an angular selector in the SBS-mirror scheme. The data obtained in the numerical simulation of transient SBS are in good agreement with experimental ones.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Processes of interaction of laser radiation with porous transparent materials during their ablation

The effect of ytterbium fibre laser radiation with λ = 1.07 μm on the pressed micropowders of transparent oxides and fluorides (CaF{sub 2}, Y{sub 2}O{sub 3}, Al{sub 2}O{sub 3}, YSZ, etc.) having low absorption coefficients is theoretically studied. Using the numerical modelling, it is established that the radiation scattering in the medium of particles 0.5 – 4.6 μm in diameter leads to the concentration of radiation in the local regions of the medium, with the intensity level exceeding the intensity of the incident radiation (0.46 MW cm{sup −2}) by many times. It is shown that with the growth of the refractive index n of the material from 1.38 (MgF{sub 2}) to 2.12 (YSZ) the intensity of radiation in the region of the strongest local maximum increases from 3.8 to 31 MW cm{sup −2}. In our opinion, this factor can be dominant in determining the possibility of achieving the ablation of such a medium by means of the radiation having an intensity of no greater than 1 MW cm{sup −2}. This hypothesis is experimentally checked by the example of preparing a nanopowder of CaF{sub 2} (n = 1.43) and 1 % Nd : Y{sub 2}O{sub 3} (n = 1.91) by evaporating the pressed target with the porosity 50 % by the continuous-wave radiation of the ytterbium fibre laser with the power 600 W and the intensity 0.4 MW cm{sup −2}. Inside the CaF{sub 2} target, the scattered radiation intensity is smaller than the optical breakdown threshold, and the target is not evaporated. Under the same conditions, the target made of higher-melting 1 % Nd : Y{sub 2}O{sub 3} evaporates well, and the efficiency of the nanopowder production amounts to 23 g h{sup −1}. (interaction of laser radiation with matter)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A platform for non-local thermodynamic equilibrium atomic physics research using the buried layer target approach at a kJ level laser facility

Here we present a design and first use of a kJ level laser facility for research of non-local thermodynamic equilibrium atomic physics using the buried layer target method. The target design included a metal layer buried inside a plastic tamper with thicknesses tailored to the expected laser intensities. The target was illuminated from each side by two laser beams with intensities of 0.5–5 × 10 14 W/cm 2 . The advanced diagnostic suite included static and time-resolved imagers and spectrometers with various spectral resolutions. A 3D printed dual elliptically curved spectrometer is presented, and its results are compared to a traditional crystal spectrometer. Experimental results and radiation hydrodynamic simulations demonstrate that the target achieved the desired thermodynamic conditions of n e ≈ 10 21 –10 22 cm -3 and T e ≈ 1–2 keV.

3D printing↗

Application of lateral photovoltage towards contactless light beam induced current measurements and its dependence on the finite beam size

The nature of the signal due to light beam induced current (LBIC) at the remote contacts is verified as a lateral photovoltage for non-uniformly illuminated planar p-n junction devices; simulation and experimental results are presented. The limitations imposed by the ohmic contacts are successfully overcome by the introduction of capacitively coupled remote contacts, which yield similar results without any significant loss in the estimated material and device parameters. It is observed that the LBIC measurements introduce artefacts such as shift in peak position with increasing laser power. Simulation of LBIC signal as a function of characteristic length L{sub c} of photo-generated carriers and for different beam diameters has resulted in the observed peak shifts, thus attributed to the finite size of the beam. Further, the idea of capacitively coupled contacts has been extended to contactless measurements using pressure contacts with an oxidized aluminium electrodes. This technique avoids the contagious sample processing steps, which may introduce unintentional defects and contaminants into the material and devices under observation. Thus, we present here, the remote contact LBIC as a practically non-destructive tool in the evaluation of device parameters and welcome its use during fabrication steps.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Capture and Control of Laser-Accelerated Proton Beams: Experiment and Simulation

This paper summarizes the ongoing studies on the possibilities for transport and RF capture of laser-accelerated proton beams in conventional accelerator structures. First results on the capture of laser-accelerated proton beams are presented, supported by Trace3D, CST particle studio and Warp simulations. Based on these results, the development of the pulsed high-field solenoid is guided by our desire to optimize the output particle number for this highly divergent beam with an exponential energy spectrum. A future experimental test stand is proposed to do studies concerning the application as a new particle source.

43 PARTICLE ACCELERATORS↗

Design and modeling of indirectly driven magnetized implosions on the NIF

The use of magnetic fields to improve the performance of hohlraum-driven implosions on the National Ignition Facility (NIF) is discussed. The focus is on magnetically insulated inertial confinement fusion, where the primary field effect is to reduce electron-thermal and alpha-particle loss from the compressed hotspot (magnetic pressure is of secondary importance). We summarize the requirements to achieve this state. The design of recent NIF magnetized hohlraum experiments is presented. These are close to earlier shots in the three-shock, high-adiabat (BigFoot) campaign, subject to the constraints that magnetized NIF targets must be fielded at room-temperature, and use ≲1 MJ of laser energy to avoid the risk of optics damage from stimulated Brillouin scattering. We present results from the original magnetized hohlraum platform, as well as a later variant that gives a higher hotspot temperature. In both platforms, imposed fields (at the capsule center) of up to 28 T increase the fusion yield and hotspot temperature. Integrated radiation-magneto-hydrodynamic modeling with the Lasnex code of these shots is shown, where laser power multipliers and a saturation clamp on cross-beam energy transfer are developed to match the time of peak capsule emission and the P2 Legendre moment of the hotspot x-ray image. The resulting fusion yield and ion temperature agree decently with the measured relative effects of the field, although the absolute simulated yields are higher than the data by 2.0−2.7×. The tuned parameters and yield discrepancy are comparable for experiments with and without an imposed field, indicating the model adequately captures the field effects. Self-generated and imposed fields are added sequentially to simulations of one BigFoot NIF shot to understand how they alter target dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of an x-ray radiography platform to study laser-direct-drive energy coupling at the National Ignition Facility

A platform has been developed to study laser-direct-drive energy coupling at the National Ignition Facility (NIF) using a plastic sphere target irradiated in a polar-direct-drive geometry to launch a spherically converging shock wave. To diagnose this system evolution, eight NIF laser beams are directed onto a curved Cu foil to generate Heα line emission at a photon energy of 8.4 keV. These x rays are collected by a 100-ps gated x-ray imager in the opposing port to produce temporally gated radiographs. The platform is capable of acquiring images during and after the laser drive launches the shock wave. A backlighter profile is fit to the radiographs, and the resulting transmission images are Abel inverted to infer radial density profiles of the shock front and to track its temporal evolution. Here, the measurements provide experimental shock trajectories and radial density profiles that are compared to 2D radiation-hydrodynamic simulations using cross-beam energy transfer and nonlocal heat-transport models.

47 OTHER INSTRUMENTATION↗

The simulation of lunar micrometeorite impacts by laser pulses

Laser pulses of a finely focused beam were used to simulate micrometeorite impacts on lunar rocks and in lunar soil. The electron microscope pictures show the detailed effects so caused; it is possible to derive an estimate of the comparative amounts of erosion a given micrometeorite flux would cause in lunar rocks and lunar soil.

Bilson, E.↗

Properties of dark solitons under SBS in focused beams

Using the method of four-wave probing of the waist of the laser beam focused into the bulk of a short active medium (L || {tau}c, where L is the length of the active medium, {tau} is the pulse duration, and c is the speed of light), we have studied the dynamics of the behaviour of a dark soliton, appearing upon a jump of the input Stokes signal phase by about {pi} under SBS. The computer simulation has shown that when spontaneous noises with the gain increment {Gamma}, exceeding the self-reflection threshold by 2 - 3 times, are generated, the dark soliton propagates along the interaction region for the time t Almost-Equal-To T{sub 2}{Gamma}{sub th}/2, where T{sub 2} is the the lifetime of acoustic phonons, and {Gamma}{sub th} = 25 - 30 is the stationary threshold gain increment. (special issue devoted to the 90th anniversary of n.g. basov)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Energy transport analysis in ultrashort pulse laser ablation through combined molecular dynamics and Monte Carlo simulation

Mechanisms of energy transport during ultrashort laser pulses (USLPs) ablation are investigated in this paper. Nonequilibrium electron-transport, material ionization, as well as density change effects, are studied using atomistic models--the molecular dynamics (MD) and Monte Carlo (MC) methods, in addition to the previously studied laser absorption, heat conduction, and stress wave propagation. The target material is treated as consisting of two subsystems: valence-electron system and lattice system. MD method is applied to analyze the motion of atoms while MC method is applied for simulating electron dynamics and multiscattering events between particles. Early-time laser-energy absorption and redistribution as well as later-time material ablation and expansion processes are analyzed. This model is validated in terms of ablation depth, lattice/electron temperature distribution as well as evolution, and plume front velocity, through comparisons with experimental or theoretical results in literature. It is generally believed that the hydrodynamic motion of the ablated material is negligible for USLP but this study shows it is true only for its effect on laser-energy deposition. This study shows that the consideration of hydrodynamic expansion and fast density change in both electron and lattice systems is important for obtaining a reliable energy transport mechanism in the locally heated zone.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Finite Element Models for Electron Beam Freeform Fabrication Process

Electron beam freeform fabrication (EBF3) is a member of an emerging class of direct manufacturing processes known as solid freeform fabrication (SFF); another member of the class is the laser deposition process. Successful application of the EBF3 process requires precise control of a number of process parameters such as the EB power, speed, and metal feed rate in order to ensure thermal management; good fusion between the substrate and the first layer and between successive layers; minimize part distortion and residual stresses; and control the microstructure of the finished product. This is the only effort thus far that has addressed computer simulation of the EBF3 process. The models developed in this effort can assist in reducing the number of trials in the laboratory or on the shop floor while making high-quality parts. With some modifications, their use can be further extended to the simulation of laser, TIG (tungsten inert gas), and other deposition processes. A solid mechanics-based finite element code, ABAQUS, was chosen as the primary engine in developing these models whereas a computational fluid dynamics (CFD) code, Fluent, was used in a support role. Several innovative concepts were developed, some of which are highlighted below. These concepts were implemented in a number of new computer models either in the form of stand-alone programs or as user subroutines for ABAQUS and Fluent codes. A database of thermo-physical, mechanical, fluid, and metallurgical properties of stainless steel 304 was developed. Computing models for Gaussian and raster modes of the electron beam heat input were developed. Also, new schemes were devised to account for the heat sink effect during the deposition process. These innovations, and others, lead to improved models for thermal management and prediction of transient/residual stresses and distortions. Two approaches for the prediction of microstructure were pursued. The first was an empirical approach involving the computation of thermal gradient, solidification rate, and velocity (G,R,V) coupled with the use of a solidification map that should be known a priori. The second approach relies completely on computer simulation. For this purpose a criterion for the prediction of morphology was proposed, which was combined with three alternative models for the prediction of microstructure; one based on solidification kinetics, the second on phase diagram, and the third on differential scanning calorimetry data. The last was found to be the simplest and the most versatile; it can be used with multicomponent alloys and rapid solidification without any additional difficulty. For the purpose of (limited) experimental validation, finite element models developed in this effort were applied to three different shapes made of stainless steel 304 material, designed expressly for this effort with an increasing level of complexity. These finite element models require large computation time, especially when applied to deposits with multiple adjacent beads and layers. This problem can be overcome, to some extent, by the use of fast, multi-core computers. Also, due to their numerical nature coupled with the fact that solid mechanics- based models are being used to represent the material behavior in liquid and vapor phases as well, the models have some inherent approximations that become more pronounced when dealing with multi-bead and multi-layer deposits.

Chandra, Umesh↗

Measurement of early time outer laser beam reflection inside a cylindrical hohlraum at the National Ignition Facility

In a National Ignition Facility (NIF) cylindrical hohlraum, any specular reflection (“glint”) off the wall from the outer cone (incident angle of 50° and 44° relative to the surface of the wall) laser beam will irradiate the capsule poles. If the glint power is sufficiently large during the picket (early time) of the laser pulse, it may seed high-mode perturbations on the capsule surface that can grow during the implosion. To quantify the glint power on the capsule during the picket by the outer beams, we performed dedicated experiments on NIF using a flat witness foil as a surrogate for the capsule in a half-hohlraum target. We found that the measured glint power is approximately comparable to simulations using a nominal electron conduction flux limiter of f = 0.15, and over an order of magnitude lower than that predicted using f = 0.03 in the wall. Based on our current understanding, we conclude that the glint from the outer beams plays an insignificant role in capsule drive asymmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗