Search NASA⌕ Search

SEARCH · Search NASA

Results for “libraries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Application of Fuel Depletion Chain Simplification to Experiment Analysis in the Advanced Test Reactor

An irradiation experiment analysis can be informed by high-fidelity reactor engineering depletion results, but this comes at a computational cost. Applying depletion chain simplification to the advanced test reactor driver fuel before performing experiment depletions permits their programmatic parameters to be calculated faster, with a small penalty to accuracy. Here, this work contrasts the results of two irradiation experiments with different neutronic characteristics. Overall, the simplified nuclide library produced using a simple one-group microscopic cross-section library for a pressurized water reactor in the depletion chain simplification process performed comparably in terms of accuracy and runtime to the simplified nuclide library produced using a three-group microscopic cross-section library generated specifically for the advanced test reactor experiments being modeled. This is attributed to the additional nuclides and transmutation pathways preserved in the one-group cross-section library, which has data for 297 nuclides, compared to the three-group cross-section library, which has data for 217 nuclides. This indicates that a cross-section library with more nuclides is better than a cross-section library with fewer nuclides for the depletion chain simplification process, even if the cross-section library with fewer nuclides better represents the flux spectrum of the system being considered.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Moving toward automated µFTIR spectra matching for microplastic identification: addressing false identifications and improving accuracy

Abstract Infrared spectroscopy is a widely used tool for studying microplastics and identifying microparticles. Researchers rely on spectral libraries to differentiate between synthetic and natural materials. Unfortunately, spectral library matching is not perfect, and best practices require researchers to use time consuming, manual peak matching to assess spectral matches. Moving toward automated matching requires increased confidence in the matching process. Using spectra matching software may increase the efficiency of particle identification, however some matching strategies may confuse natural materials such as cotton, silk, and plant matter with common classes of synthetics such as polyesters and polyamides. In this experiment, we prepared 22 pristine sample materials from natural and synthetic sources and measured micro-Fourier transform infrared (µFTIR) spectra in transmission mode for each sample using a Thermo Nicolet iN10 MX instrument. The collected spectra were then input into two spectral library matching systems (Omnic Picta and Open Specy), using a total of five identification routines. Next, we placed a subset of four pristine microplastic materials in a biologically active river system for two weeks to simulate environmental samples. These simulated environmental samples were processed using 10% hydrogen peroxide for 24 h to remove organic contamination and then identified using the strongest performing library. We found that libraries with fewer sample spectra produced lower correlation matches and that using derivative correction greatly reduced the number of inaccuracies in identifying materials as either natural or synthetic. We also found that environmental fouling reduced the correlation value of library matches when compared to pristine particles, however the effect was not consistent across the four materials tested. Overall, we found that the accuracy of automated library matching in the tested systems and processing routines varied from 64.1 to 98.0% for distinguishing between natural and synthetic materials, and that a high Hit Quality Index (HQI) did not always correlate with accuracy. These results are important for the microplastic field, demonstrating a need to rigorously test spectral libraries and processing routines with known materials to ensure identification accuracy.

Kozloski, Rachel↗
DOE OSTI2024

Solar Energy Extension Project

The town of Stratford plans to develop and own a 6 kilowatt (kW) solar array on the roof of a municipal-owned public pavilion on the town green. A SolarEdge level 2 EV charging station will be installed at the pavilion to be used by the public. The charging station will have one charging port. The town will install 3 air source heat pumps in the library located adjacent to the pavilion to reduce the use of propane to heat the library. The town will install 4 air source heat pumps in the Town Hall to reduce the use of #2 heating oil to heat the facility. The 6 kW solar array will provide electricity to the library to offset electricity usage, and when an EV plugs into the charging station the solar will provide electricity to the charging station. There is no ground disturbance or ground trenching associated with this project. The 6 kW solar array on the roof of the pavilion will include 20 (390) watt all black panels. A SolarEdge level 2 EV charger will be installed at the pavilion with the 240 V inverter. The solar array will provide electricity to the library and when a vehicle plugs into the EV charger the solar array will switch to power the charger. Any excess electricity that is generated by the array and not used by the library or the EV charger will be fed onto the grid and the town will receive a net metering credit applied towards future consumption. There is no ground disturbance associated with the EV charger or solar array, and the town will install signage to direct the public to the charger. The library will install 2 (18,000) BTU ductless air source heat pumps and 1 (24,000) BTU unit. This will significantly reduce the amount of propane required to heat the library. The Town Hall will install 2 (36,000) BTU ductless air source heat pumps and 2 (9,000) BTU units to reduce the amount of #2 heating oil required to heat the building.

14 SOLAR ENERGY↗
DOE OSTI2025

MPACT Safeguards Modeling: FY25 Update

Sandia National Laboratories develops and maintains several open-source software packages to support material accountancy analyses. This includes the Material Accountancy Performance Indicator Toolkit (MAPIT), the Fissile Facility Flow Modeler (F3M) and the Separation and Safeguards Performance Model Library (SSPM-L). MAPIT is responsible for performing statistical safeguards analyses on bulk and itemized data from nuclear fuel cycle facilities and can operate on real or synthetic data. MAPIT is the only open-source software for such analyses. F3M is a library of modules, built in MATLAB Simulink, that contain pre made blocks to represent different generic fuel cycle processes. These blocks can be used together in a modular fashion to represent and simulate nuclear fuel cycle processes with the goal of improving facility-level accountancy during the design phase. F3M is also an open-source library. Finally, the SSPM-L library is a series of completed models built from F3M. The library includes facility models such as a generic PUREX facility and a fuel fabrication facility. The SSPM-L library is not open source, but is available to collaborators with a relevant use case. These tools include modeling and simulation pipelines to simulate nuclear fuel cycle facilities and the underlying software needed to simulate measurement uncertainty and perform statistical analyses. Together, these tools can perform end-to-end nuclear material accountancy analyses. This report documents the various improvements made to these tools in FY25. Specifically, we added new statistical test, new statistical modeling capabilities, new fuel cycle facility models, and launched a new open-source model component library.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1994

The Austrialian National Chinese Japanese Korean Project

Providing access to Asian-language materials has always been a problem for libraries. There are particular difficulties in acquiring Asian materials, in cataloguing them and providing access, and in incorporating them in library systems. There is, however, an urgent and growing need for access to Asian materials. Part of the response of the Australian library community to the difficulties and to the increasing need has been the Australian National CJK (Chinese, Japanese and Korean) Project. The CJK Project is a co-operative project involving seven Australian universities and the National Library of Australia. Membership is expected to grow to include other Australian research libraries, some public research libraries and some overseas libraries.

Groom, Linda↗
DOE OSTI2024

Fine Temperature Grid Continuous Energy Cross Section Generation for Monte Carlo Analysis of Xe-100 Design

The standard “A Compact ENDF (ACE)” data libraries used by Monte Carlo based reactor physics codes calculations are provided by Los Alamos National Laboratory (LANL) with a temperature interval mostly of 300 K (e.g. 300 K, 600 K, 900 K) for the cross sections and between 100 K and 200 K for the thermal scattering libraries (TSL). However, some codes such as MCNP lack capability to perform on-the-fly temperature interpolation during simulation both for neutron and TSL cross-sections. To evaluate the impact related to Doppler broadening and spectrum shift associated with TSL changes, this paper explores the potential of adopting a temperature grid finer than the ones contained in the standard data libraries. A 50 K temperature grid was employed to quantify the error in neutronics calculations due to temperature grid resolution. This was achieved by comparing the results of this study (50 K temperature interval) against the results obtained with standard data libraries (>100 K temperature interval). While the adopted grid primarily relies on the ENDF/B-VII.1 library, for neutron cross-sections, it utilizes ENDF/B-VIII.0 library for TSL. The analyses confirmed that the accuracy of neutronics calculations is satisfactory when using a 50 K temperature grid. Notably, adopting a 50 K temperature grid, as opposed to standard libraries or coarser temperature grids, could lead to a difference of no more than a few hundred pcm in dk for both fresh fuel and burnt fuel. The most sensitive reaction type to the temperature grid was as expected identified as the capture cross-section of U-238.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Cross-Code Verification of Neutronics Analysis Tools at INL Applied for 238 Pu Production in the Advanced Test Reactor

Here, analyses are completed for experiments prior to experiment irradiation in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). Various codes are used to qualify all experiments planned for insertion in the reactor, thereby ensuring that all safety and programmatic requirements are satisfied preirradiation. Among the common experiment analysis tools at INL are MCNP5 coupled to ORIGEN2 (MOPY) and MC21. MOPY uses MCNP5 for transport calculations along with calculations for fluxes and select reaction rates, and then ORIGEN2 handles the step-by-step and postirradiation depletion. MC21 handles all in-reactor transport and step-by-step, during-irradiation, depletion calculations, and then ORIGEN (SCALE 6.2.3) is used for decay and dose calculations postirradiation. The MOPY results, along with those obtained via two variations of the MC21 model, were compared in terms of 238 Pu production in the ATR’s H10 position. For the MOPY model, the MC21 model utilizing the HELIOS-based fission product (FP) library, and the MC21 model utilizing the expanded 1300 FP library, the during-cycle irradiation in-core heating results were sufficiently equivalent; however, the MOPY model and the MC21 model with the HELIOS library showed some differences relating to the respective FP libraries. Ultimately, the MC21 model with a 1300 FP library produced the most consistent results throughout the cycle, whereas the MC21 model that utilized the (smaller) HELIOS library was able to handle during-irradiation analysis but lacked certain short-lived FPs that significantly contributed to the total decay heat at shutdown. MOPY, on the other hand, was found to overpredict fission gas production, as a result of limitations in the ORIGEN2 code.

ATR↗
DOE OSTI2024

SynBio QC Dual Barcode QC (DBC) v1.0

This software was designed as a sequence validation tool for the assembly of synthetic constructs, where the constructs have a high degree of similarity and thus are barcoded prior to the sequencing library prep. It demultiplexes each FASTQ file for each barcode, then analyzes the resulting FASTQ files against a list of reference sequences for that barcode/library, combining the results from eight sequencing libraries to generate a summary, and the files needed to view the results in the Integrative Genomics Viewer (IGV) application for manual verification. This was developed for FASTQ files generated by PacBio sequencing, but could be used on any FASTQ files that do not have paired end reads. It can be used to analyze one - eight libraries at a time. Each construct is independently analyzed with only the sequences with the same barcode, in the same pooled library. Then the results are combined into a user friendly summary. This is used to identify which libraries of pooled sequences contains a perfect match, or fixable match to the reference file. This pipeline uses many freely available open source libraries, the value added is that in our application the steps of the pipeline are defined in Workflow Description Language (WDL) and run through the Cromwell workflow engine in Docker containers, for easy distribution and set up, as well as the user friendly html summary that is generated.

Simirenko, Lisa↗
DOE OSTI2024

Assessment of Evaluations for 239 Pu Photonuclear Cross Sections

We have performed an initial assessment of available data libraries for photonuclear reactions on 239 Pu. Specifically, we considered the following five evaluated data libraries: the ENDF/B-VIII.0 and the recently deployed ENDF/B.VIII.1 Evaluated Nuclear Data Files, the International Atomic Energy Agency (IAEA) Photonuclear Data Library 2019 (IAEA-2019), the Japanese evaluated nuclear data library version 5 (JENDL-5), and the 2023 version of the TALYS Evaluated Nuclear Data Library (TENDL-2023). Each of these libraries were translated form ENDF to GNDS format using FUDGE. For each of the Pu isotopes, we provide a comparison with available experimental data in the EXFOR experimental nuclear reaction database, as well as a rapid quantitative assessment of the quality of the evaluation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2010

Update on PISCES

An updated version of the Platform Independent Software Components for the Exploration of Space (PISCES) software library is available. A previous version was reported in Library for Developing Spacecraft-Mission-Planning Software (MSC-22983), NASA Tech Briefs, Vol. 25, No. 7 (July 2001), page 52. To recapitulate: This software provides for Web-based, collaborative development of computer programs for planning trajectories and trajectory- related aspects of spacecraft-mission design. The library was built using state-of-the-art object-oriented concepts and software-development methodologies. The components of PISCES include Java-language application programs arranged in a hierarchy of classes that facilitates the reuse of the components. As its full name suggests, the PISCES library affords platform-independence: The Java language makes it possible to use the classes and application programs with a Java virtual machine, which is available in most Web-browser programs. Another advantage is expandability: Object orientation facilitates expansion of the library through creation of a new class. Improvements in the library since the previous version include development of orbital-maneuver- planning and rendezvous-launch-window application programs, enhancement of capabilities for propagation of orbits, and development of a desktop user interface.

Pearson, Don↗
NASA NTRS2011

Stress-Driven Selection of Novel Phenotypes

A process has been developed that can confer novel properties, such as metal resistance, to a host bacterium. This same process can also be used to produce RNAs and peptides that have novel properties, such as the ability to bind particular compounds. It is inherent in the method that the peptide or RNA will behave as expected in the target organism. Plasmid-born mini-gene libraries coding for either a population of combinatorial peptides or stable, artificial RNAs carrying random inserts are produced. These libraries, which have no bias towards any biological function, are used to transform the organism of interest and to serve as an initial source of genetic variation for stress-driven evolution. The transformed bacteria are propagated under selective pressure in order to obtain variants with the desired properties. The process is highly distinct from in vitro methods because the variants are selected in the context of the cell while it is experiencing stress. Hence, the selected peptide or RNA will, by definition, work as expected in the target cell as the cell adapts to its presence during the selection process. Once the novel gene, which produces the sought phenotype, is obtained, it can be transferred to the main genome to increase the genetic stability in the organism. Alternatively, the cell line can be used to produce novel RNAs or peptides with selectable properties in large quantity for separate purposes. The system allows for easy, large-scale purification of the RNAs or peptide products. The process has been reduced to practice by imposing sub-inhibitory concentrations of NiCl2 on cells of the bacterium Escherichia coli that were transformed separately with the peptide library and RNA library. The evolved resistant clones were isolated, and sequences of the selected mini-gene variants were established. Clones resistant to NiCl2 were found to carry identical plasmid variants with a functional mini-gene that specifically conferred significant nickel tolerance on the host cells. Sequencing of the selected mini-gene revealed a propensity of the encoded peptide to bind transient metal ions. Expression of the mini-gene markedly improved growth parameters of the evolved clones at sub-inhibitory concentrations of NiCl2 while being slightly detrimental in the absence of stress. Similar results have been obtained with the RNA libraries. Overall, the results demonstrate a very natural outcome of the selection experiments in which the mini-genes were expected to be either successfully integrated into bacterial genetic networks, or rejected depending upon their effect on host fitness. This described approach can be useful as a laboratory model to study the dynamics of bacterial adaptive evolution on the molecular level. It can also provide a strategy for screening expressed DNA libraries in search of novel genes with desirable properties.

Fox, George E.↗
DOE OSTI2025

Thermophilic Chassis-Enabled High-Throughput Selection of a Thermostable Fluorogenic Reporter

Thermostable proteins show increased shelf life and performance at elevated temperatures and under harsh conditions, resulting in lower costs for various industrial and biotechnological applications. However, due to a limited understanding of the relationship between stability and function, protein stabilization remains primarily a trial-and-error approach. Therefore, building a combinatorial library of mutations predicted to improve stability, followed by experimental testing, represents a markedly improved methodology. However, the lack of high-throughput approaches to screen even a moderately sized library presents a major bottleneck in the field. Here, in this study, we use a thermophile, Parageobacillus thermoglucosidasius (Ptherm) to rapidly screen combinatorial libraries consisting of rationally designed thermostabilizing mutations (∼10 3 –10 4 ) of a mesophilic fluorescent reporter, Y-FAST. On a Petri dish, microbial growth at an elevated temperature and exposure to fluorogen yielded several colonies of Ptherm that showed distinct fluorescence at 55 and 68 °C in our two sequentially generated libraries using Rosetta and ProteinMPNN, respectively. The Y-FAST variants isolated from fluorescent colonies were brighter than Y-FAST and showed higher resistance to thermal and chemical denaturation. AlphaFold-predicted structures and MD simulations revealed stability-enhancing salt bridges and hydrogen bond networks in the isolated FAST variants. The moderately thermostable FAST (tsFAST) and hyperstable FAST (hsFAST) were then demonstrated as translation reporters for protein expression and folding at elevated temperatures, such as 55 and 68 °C. Our approach of combinatorial library generation and high-throughput screening in a thermophilic chassis could, in principle, be extended to other proteins fused to these translation reporters. Furthermore, the hsFAST protein is small─half the size of the green fluorescent protein─and does not require oxygen for maturation, making it ideal for engineering extremophilic anaerobes for biosensing and bioconversion.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Hyperparameter Studies for Vision Transformers Trained on High-Fidelity Simulations

This library is a collection of python modules that define, train, and analyze vision-transformer (ViT) machine learning models. The code implements, with mild modifications, ViT models that have been made publicly available through publication and GitHub code. The training data for these models is hydrodynamic simulation output in the form of numpy arrays. This library contains code to train these ViT models on the hydrodynamic simulation output with a variety of hyperparameters, and to compare the results of such models. Furthermore, the library contains definitions of simple convolutional neural network (CNN) machine learning architectures which can be trained on the same hydrodynamic simulation output. These are included as a reference point to compare the ViT models to. Additionally, the library includes trained ViT and CNN models and example input data for demonstration purposes. The code is based on the PyTorch python library.

Callis, Skylar↗
DOE OSTI2025

Open Source Software Prevalence Ingest Tool

The OSSP Ingest Tool accepts user-input organizational information, ingests IT/OT asset lists in Excel format, and ingests the associated CycloneDX SBOM's. It then performs analytics demonstrating the ability to answer the follow research questions: o RQ1. Ability to identify all OSS services running on, and all OSS components present within, an OT device o RQ1a: Ability to differentiate multiple versions of the same OSS component within each OT device. o RQ1b: Ability to differentiate running from not-running OSS components. o RQ1c: Ability to differentiate based on the originator of the component, because a supplier may have modified it after retrieval from the upstream software source. o RQ2. Ability to correlate the identity of a single OSS component across multiple OT devices, mitigating common name variations such as differences in capitalization, '-' vs '_', and so on. o RQ3. Ability to perform subset analysis of OSS components across multiple OT devices o RQ3a: Ability to perform subset analysis across OSS libraries, generating density & distribution graphs to identify commonly-used libraries and outliers. o RQ3b: Ability to perform subset analysis of a single OSS library, generating density & distribution by CI sector, by device type, by device make/model, and/or by firmware version. o RQ3c: Ability to perform subset analysis by grouping OSS libraries according to programming language, then overlay with RQ4b. o RQ3d: Ability to perform subset analysis by OSS upstream source, providing insight into degree of modifications performed by suppliers. o RQ4. Ability to identify dependencies (transitive and direct) of each differentiated OSS library within each OT device, and enable RQ1,2,3 iteratively for dependencies. o RQ1. Ability to identify all OSS services running on, and all OSS components present within, an OT device o RQ1a: Ability to differentiate multiple versions of the same OSS component within each OT device. o RQ1b: Ability Page

Kapadia, Shayna [Lawrence Livermore National Labor↗