Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Determining Partial Atomic Charges for Liquid Water: Assessing Electronic Structure and Charge Models

Partial atomic charges provide an intuitive and efficient way to describe the charge distribution and the resulting intermolecular electrostatic interactions in liquid water. Many charge models exist and it is unclear which model provides the best assignment of partial atomic charges in response to the local molecular environment. In this work, we systematically scrutinize various electronic structure methods and charge models (Mulliken, natural population analysis, CHelpG, RESP, Hirshfeld, Iterative Hirshfeld, and Bader) by evaluating their performance in predicting the dipole moments of isolated water, water clusters, and liquid water as well as charge transfer in the water dimer and liquid water. Although none of the seven charge models is capable of fully capturing the dipole moment increase from isolated water (1.85 D) to liquid water (about 2.9 D), the Iterative Hirshfeld method performs best for liquid water, reproducing its experimental average molecular dipole moment, yielding a reasonable amount of intermolecular charge transfer, and showing modest sensitivity to the local water environment. The performance of the charge model is dependent on the choice of the density functional and the quantum treatment of the environment. The computed molecular dipole moment of water generally increases with the percentage of the exact Hartree–Fock exchange in the functional, whereas the amount of charge transfer between molecules decreases. For liquid water, including two full solvation shells of surrounding water molecules (within about 5.5 Å of the central water) in the quantum chemical calculation converges the charges of the central water molecule. Furthermore, our final pragmatic quantum chemical charge-assigning protocol for liquid water is the Iterative Hirshfeld method with M06-HF/aug-cc-pVDZ and a quantum region cutoff radius of 5.5 Å.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gapless spin-liquid state in the structurally disorder-free triangular antiferromagnet NaYbO 2

In this work, we present a candidate material, NaYbO 2 , that realizes the genuine spin-liquid state on the triangular lattice and benchmarks recent theoretical predictions on the relevant spin models. Synchrotron x-ray diffraction and neutron scattering exclude both structural disorder and crystal-electric-field randomness. Furthermore, our thermodynamic measurements, neutron diffraction, and muon spectroscopy coincidentally prove the absence of magnetic order and persistent spin dynamics down to at least 70 mK. Continuous magnetic excitations first observed by inelastic neutron scattering show a gapless feature and the low-energy spectral weight accumulating at the K point of the Brillouin zone, in agreement with theoretical predictions for the spin-liquid phase of triangular antiferromagnets. Such a gapless spin-liquid phase is further confirmed by our magnetic specific heat analysis that reveals a departure from simple power-law behavior. Our work demonstrates that NaYbO 2 practically gives direct experimental access to the spin-liquid physics of triangular antiferromagnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thin Films of a Main Chain Columnar Liquid Crystal: Studies of Structure, Phase Transitions and Alignment

The structure of thin films of poly(di-n-propylsiloxane), PDPS, was studied with a combination of optical and atomic force microscopy, electron diffraction, and grazing incidence X-ray diffraction. Two different morphological features are observed in the mesomorphic films. The lamellar ribbons are composed of the chains oriented parallel to the plane of the substrate in which the reciprocal space 10 vector is vertical. The other feature with a circular symmetry, the cylindrite, contains the chains parallel to the substrate normal. The cylindrites and needles are essentially the same mesomorphic lamellae that develop differently under the conditions of confinement. The crystallization of PDPS films does not change the gross morphological features developed during the mesophase formation and mainly proceeds via epitaxial growth of the {alpha}-crystal on the parent mesophase. Spontaneous alignment of the mesomorphic PDPS films on the PTFE-rubbed substrates allows fabricating highly crystalline inorganic polymer surfaces oriented on the scale of centimeters.

36 MATERIALS SCIENCE↗

Molecular structure of the discotic liquid crystalline phase of hexa-peri-hexabenzocoronene/oligothiophene hybrid and their charge transport properties

Using atomistic molecular dynamics simulation, we study the discotic columnar liquid crystalline (LC) phases formed by a new organic compound having hexa-peri-Hexabenzocoronene (HBC) core with six pendant oligothiophene units recently synthesized by Nan Hu et al. [Adv. Mater. 26, 2066 (2014)]. This HBC core based LC phase was shown to have electric field responsive behavior and has important applications in organic electronics. Our simulation results confirm the hexagonal arrangement of columnar LC phase with a lattice spacing consistent with that obtained from small angle X-ray diffraction data. We have also calculated various positional and orientational correlation functions to characterize the ordering of the molecules in the columnar arrangement. The molecules in a column are arranged with an average twist of 25° having an average inter-molecular separation of ∼5 Å. Interestingly, we find an overall tilt angle of 43° between the columnar axis and HBC core. We also simulate the charge transport through this columnar phase and report the numerical value of charge carrier mobility for this liquid crystal phase. The charge carrier mobility is strongly influenced by the twist angle and average spacing of the molecules in the column.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decomposition of liquid-liquid extraction organic phase structure into critical and pre-peak contributions

Solution nanostructure induced by amphiphile self-association plays an important role in various chemical and physical processes, including liquid-liquid extraction (LLE). Small angle scattering techniques are an essential means of probing this structure, but, due to non-uniqueness of scattering patterns, their interpretation is not trivial. Here, in this study, we decompose small angle x-ray scattering (SAXS) patterns for a range of binary LLE organic phases into two components: Ornstein-Zernike and pre-peak contributions resulting from, respectively, critical concentration fluctuations and packing of the amphiphilic extractant molecules in the nonpolar aliphatic diluent. While we previously applied Ornstein-Zernike scattering models to similar organic phases, including the pre-peak explicitly in the fit allows us to measure weak fluctuations at high extractant concentration and simultaneously obtain information on the position and intensity of the correlation peak related to amphiphile packing. Scattering patterns and partial structure factors calculated from molecular dynamics simulations support this interpretation. We demonstrate how this minimal scattering model describes nanostructuring for a large number of extractant types over their entire extractant/diluent composition ranges, suggesting simple and universal behavior. The straightforward assignment of these structural contributions facilitates the comparison of these features between different classes of extractant molecules and will enable further studies of organic phase aggregation. Applicability to more complex, process-relevant organic phases is illustrated with post-contact organic phases containing significant quantities of extracted lanthanide nitrate salt, which we find are readily described by this model.

74 ATOMIC AND MOLECULAR PHYSICS↗

Liquid fragility maximum in lithium borate glass‐forming melts related to the local structure

Abstract The structure of liquid lithium pyroborate, Li 4 B 2 O 5 ( J = Li/B = 2), has been measured over a wide temperature range by high‐energy X‐ray diffraction, and compared to that of its glass and borate liquids of other compositions. The results indicate a gradual increase in tetrahedral boron fraction from 3(1)% to 6(1)% during cooling from T = 1271(15) to 721(8) K, consistent with the larger N 4 = 10(1)% found for the glass, and literature 11 B nuclear magnetic resonance measurements. van't Hoff analysis based on a simple boron isomerization reaction BØ 3 O 2 – ⇌ BØO 2 2– yields Δ H = 13(1) kJ mol –1 and Δ S = 40(1) J mol –1 K –1 for the boron coordination change from 4 to 3, which are, respectively, smaller and larger than found for singly charged isomers for J ≤ 1. With these, we extend our model for N 4 ( J , T ), nonbridging oxygen fraction f nbr ( J , T ), configurational heat capacity , and entropy S conf ( J , T ) contributions up to J = 3. A maximum is revealed in at J = 1, and shown semi‐quantitatively to lead to a corresponding maximum in fragility contribution, akin to that observed in the total fragilities by temperature‐modulated differential scanning calorimetry. Lithium is bound to 4.6(2) oxygen in the pyroborate liquid, with 2.7(1) bonds centered around 1.946(8) Å and 1.9(1) around 2.42(1) Å. In the glass, n LiO = 5.4(4), the increase being due to an increase in the number of short Li–O bonds.

36 MATERIALS SCIENCE↗

Improved Sensitivity and Separations for Phosphopeptides using Online Liquid Chromotography Coupled with Structures for Lossless Ion Manipulations Ion Mobility–Mass Spectrometry

Phosphoproteomics greatly augments proteomics and holds tremendous potential for insights into the modulation of biological systems for various disease states, etc. However, numerous challenges hinder conventional methods in terms of measurement sensitivity, throughput, and capabilities for confident phosphopeptide and phosphosite identification. In this work, we report the first example of integrating structures for lossless ion manipulations ion mobility (SLIM) IM-MS with online reversed-phase liquid chromatography (LC) to evaluate its potential for addressing the aforementioned challenges. A mixture of 51 heavy-labeled phosphopeptides was analyzed with a SLIM IM module having integrated ion accumulation and long-path separation regions. The SLIM IM-MS provided improved sensitivity over an established LC-SRM method, with limits of detection as low as 50 pM (50 amol/µl) for several peptides. Conventionally problematic phosphopeptide isomers could be resolved following an 18 m SLIM IM separation. The 2-D peak capacity was estimated as ~9000 for 90 min LC separation coupled to an 18 m SLIM IM separation, considerably higher than LC alone and providing a basis for both improved identification and quantification, with additional gains projected with the future use of longer path SLIM IM separations. Thus, LC-SLIM IM-MS offers great potential for improving the sensitivity, separation, and throughput of phosphoproteomics analyses.

Chouinard, Christopher D.↗

Dual density wave state in liquid Ga

Liquid Ga is considered to be in a mixed state of metallic and covalent local states, and shows complex behavior, similar to those of other polyvalent Group III–V elements on the Periodic Table, such as Si, Ge, Sn, and Bi. We studied liquid Ga by inelastic neutron scattering to obtain the pair-distribution function. We found that the structure of liquid Ga has the medium-range order characterized by two overlapping density waves (DWs), one originating from ionic repulsion and the other due to electronic driving force to create charge DWs. We suggest that the dual DW state is naturally elucidated by the DW theory, rather than the widely used Ornstein–Zernike theory.

atomic structure↗

Tunable structure and dynamics of active liquid crystals

Active materials are capable of converting free energy into directional motion, giving rise to notable dynamical phenomena. Developing a general understanding of their structure in relation to the underlying nonequilibrium physics would provide a route toward control of their dynamic behavior and pave the way for potential applications. The active system considered here consists of a quasi–two-dimensional sheet of short (≈1 μm) actin filaments driven by myosin II motors. By adopting a concerted theoretical and experimental strategy, new insights are gained into the nonequilibrium properties of active nematics over a wide range of internal activity levels. In particular, it is shown that topological defect interactions can be led to transition from attractive to repulsive as a function of initial defect separation and relative orientation. Furthermore, by examining the +1/2 defect morphology as a function of activity, we found that the apparent elastic properties of the system (the ratio of bend-to-splay elastic moduli) are altered considerably by increased activity, leading to an effectively lower bend elasticity. At high levels of activity, the topological defects that decorate the material exhibit a liquid-like structure and adopt preferred orientations depending on their topological charge. Together, these results suggest that it should be possible to tune internal stresses in active nematic systems with the goal of designing out-of-equilibrium structures with engineered dynamic responses.

36 MATERIALS SCIENCE↗

Electronic structure and pair potential energy analysis of 4-n-methoxy-4′-cyanobiphenyl: A nematic liquid crystal

Electronic structure properties of 4-n-methoxy-4′-cyanobiphenyl, a pure nematic liquid crystal have been examined using an ab‒initio, HF/6‒31G(d,p) technique with GAMESS program. Conformational and charge distribution analysis have been carried out. MEP, HOMO and LUMO surfaces have been scanned. Ionization potential, electron affinity, electronegativity, global hardness and softness of the liquid crystal molecule have been calculated. Further, stacking, side by side and end to end interactions between a molecular pair have been evaluated. Results have been used to elucidate the physico-chemical and liquid crystalline properties of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Liquid Droplets on Turbulence Structure in a Round Gaseous Jet

A second-order model which predicts the modulation of turbulence in jets laden with uniform size solid particles or liquid droplets is discussed. The approach followed is to start from the separate momentum and continuity equations of each phase and derive two new conservation equations. The first is for the carrier fluid's kinetic energy of turbulence and the second for the dissipation rate of that energy. Closure of the set of transport equations is achieved by modeling the turbulence correlations up to a third order. The coefficients (or constants) appearing in the modeled equations are then evaluated by comparing the predictions with LDA-measurements obtained recently in a turbulent jet laden with 200 microns solid particles. This set of constants is then used to predict the same jet flow but laden with 50 microns solid particles. The agreement with the measurement in this case is very good.

Elghobashi, S. E.↗

Measuring Liquid Drop Properties on Nanoscale 1D Patterned Photoresist Structures

This communication reports liquid wetting properties of DI-water on one-dimensional nano-patterned photoresist lines atop a silicon substrate as the pattern period is varied from 0.3- to 1.0-µm. Both constant photoresist height and constant width/height ratios are investigated. The line/period ratio was fixed at 0.3 (0.4) for different measurement sequences. The surface of the photoresist was treated with a short CHF 3 reactive ion etch to ensure consistent hydrophobic photoresist: water surface energies. Average parallel contact angle (θ || ), average perpendicular contact angle (θ ⊥ ), drop width (W), and drop length (L) at constant volume were measured on nano-patterned surfaces fabricated with interferometric lithography. Both θ || and θ ⊥ contact angles increase as the period (0.3- to 1-μm) increases; the θ || spreading rate is faster than θ ⊥ due to pinning on the grooves resulting in an elongated drop shape. The traditional Wenzel and Cassie-Baxter models of drop contact angles were developed for isotropic random 2D roughness and do not account for the anisotropy induced by the 1D line patterns. The observed angular variations with period are not consistent with either model. Understanding liquid wetting properties and hydrophobicity on 1D silicon surfaces has many applications in lab-on-a-chip, micro/nano-fluidic devices, roll-to-roll nano-imprint fabrication, self-cleaning surfaces, and micro-reactors.

42 ENGINEERING↗

Spatially resolved structural order in low-temperature liquid electrolyte

Determining the degree and the spatial extent of structural order in liquids is a grand challenge. Here, we are able to resolve the structural order in a model organic electrolyte of 1 M lithium hexafluorophosphate (LiP 6 ) dissolved in 1:1 (v/v) ethylene carbonate:diethylcarbonate by developing an integrated method of liquid-phase transmission electron microscopy (TEM), cryo-TEM operated at -30°C, four-dimensional scanning TEM, and data analysis based on deep learning. This study reveals the presence of short-range order (SRO) in the high–salt concentration domains of the liquid electrolyte from liquid phase separation at the low temperature. Molecular dynamics simulations suggest the SRO originates from the Li + - (PF 6 - ) n (n > 2) local structural order induced by high LiP 6 salt concentration.

42 ENGINEERING↗

Structure retrieval in liquid-phase electron scattering

Electron scattering on liquid samples has been enabled recently by the development of ultrathin liquid sheet technologies. The data treatment of liquid-phase electron scattering has been mostly reliant on methodologies developed for gas electron diffraction, in which theoretical inputs and empirical fittings are often needed to account for the atomic form factor and remove the inelastic scattering background. In this work, we present an alternative data treatment method that is able to retrieve the radial distribution of all the charged particle pairs without the need of either theoretical inputs or empirical fittings. Here, the merits of this new method are illustrated through the retrieval of real-space molecular structure from experimental electron scattering patterns of liquid water, carbon tetrachloride, chloroform, and dichloromethane.

74 ATOMIC AND MOLECULAR PHYSICS↗

Epoxy elastomers reinforced with functionalized multi-walled carbon nanotubes as stimuli-responsive shape memory materials

In this work, the incorporation of multiwalled carbon nanotubes (MWCNT) into epoxy-based elastomers was carried out in order to obtain nanocomposite systems with shape memory effect. For the preparation of elastomeric matrices, p-bis(2,3-epoxypropoxy)-α-methylstilbene (DOMS) was cured with sebacic acid. DOMS was synthesized in our laboratory and it is characterized by a rigid-rod, potentially liquid crystalline structure. A lightly cross-linked liquid crystalline elastomer was obtained. As for nanocomposites, variable amounts (0.75, 1.50, 3.0, 6.0, 12.0 wt.%) of COOH-MWCNTs were employed. In order to improve the nanotubes dispersibility and the interfacial adhesion with the epoxy matrix, an optimized two-step procedure was developed, which consisted in grafting the epoxy monomer onto the nanotube surface and then curing it in presence of crosslinking agent. DOMS-functionalized MWCNT were characterized through solvent dispersion experiments, FTIR spectroscopy and TGA analysis, which demonstrated the occurred covalent functionalization of the nanotubes with the epoxy monomers. The morphological analysis through electron microscopy demonstrated that this was an efficient strategy to improve the dispersion of nanotubes within the matrix. The second part of the work was devoted to the structural, thermal, mechanical and electric characterization of elastomeric nanocomposites. The results indicated a general improvement of properties of nanocomposites. Also, independently of the nanotube content, a smectic phase formed. Shape memory features of LC systems were also evaluated. It was demonstrated the shape could be recovered through heating, solvent immersion, as well as upon the application of an electrical field.

36 MATERIALS SCIENCE↗

Cylindrical Confinement of Nanocolloidal Cholesteric Liquid Crystal

The organization of nanocolloidal liquid crystals in constrained geometries has fundamental and practical importance, since under confinement, liquid crystals contain stable topological defects that can serve as templates for nanoparticle organization. Three-dimensional confinement of cholesteric (Ch) liquid crystals formed by cellulose nanocrystals (CNCs) have been extensively studied; however, their two-dimensional confinement remains underinvestigated. In this work, we report the results of systematic experimental studies of two-dimensional confinement of Ch–CNC liquid crystal in cylindrical capillaries with varying inner diameters. Confinement resulted in phase separation of the Ch–CNC liquid crystal into a Ch shell formed by concentric CNC pseudolayers with the helicoidal axis perpendicular to the inner surface of the capillary walls, and a micrometer-diameter isotropic core thread running parallel to the long axis of the capillary. The morphology of the confined Ch–CNC liquid crystal varied when progressively increasing the degree confinement. Finally, we show that phase separation of the Ch–CNC liquid crystal into a Ch shell and an isotropic core is preserved in flexible capillary tubing, suggesting the applicability of this system for the fabrication of flexible optical waveguides.

59 BASIC BIOLOGICAL SCIENCES↗

Surface structures of hybrid aligned liquid crystal network coatings containing reverse tilt domain

Controlled shape changes of polymerized liquid crystalline coatings is often achieved via prepatterning the molecular orientation of liquid crystal (LC) monomers at the stage of preparation. In this work, using the so-called hybrid alignment of the LC, we produce surface structures of positive Gaussian curvature of coatings without complex techniques such as photoalignment. A mixture of LC monomers coated onto a glass plate with planar alignment of the director is exposed to air, which promotes vertical alignment. The competing planar and homeotropic boundary conditions result in a) thickness dependent director and b) spontaneous formation of spindle-like regions, limited by disclination loops, that are called the reverse tilt domains (RTDs). Here, the disclination separates different director configurations inside and outside the RTD. The RTDs produce relatively big protrusions (100 – 600 nm) of the LC network coating. Actuation of the coating by heat increases the amplitude of RTD protrusions.

42 ENGINEERING↗

Correlation of the fragility of metallic liquids with the high temperature structure, volume, and cohesive energy

In this work, the thermal expansion coefficients, structure factors, and viscosities of twenty-five equilibrium and supercooled metallic liquids have been measured using an electrostatic levitation (ESL) facility. The structure factor was measured at the Advanced Photon Source, Argonne, using the ESL. A clear connection between liquid fragility and structural and volumetric changes at high temperatures is established; the observed changes are larger for the more fragile liquids. It is also demonstrated that the fragility of metallic liquids is determined to a large extent by the cohesive energy and is, therefore, predictable. These results are expected to provide useful guidance in the future design of metallic glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗