Search NASA⌕ Search

SEARCH · Search NASA

Results for “low order model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Robust Predictive Control for Modular Solid-State Transformer With Reduced DC Link and Parameter Mismatch

This paper presents the analysis and implementation of a predictive control method for dc-link regulation and voltage balance in a cascaded modular reduced dc-link solid-state transformer (SST). Passive components like bulky dc links limit the power density of power converters, especially medium-voltage (MV) SST. Reduced dc-link or low-inertia converters can dramatically reduce the size, cost, and weight by tolerating larger dc-link ripples and improve the reliability with electrolytic capacitor-less dc link. However, a small dc link leads to tight coupling between the input and the output stages, which is a challenge for control design. In stacked low-inertia converters (SLIC), the low-inertia converter modules are stacked for MV applications, resulting in coupling between the modules and making the control more challenging. A new model predictive control method which can achieve deadbeat regulation on the dc link without weighting factors has been proposed to address this novel problem. This paper focuses on analyzing the condition of the low-inertia dc link up to 80% ripple, the robustness of the control under parameter mismatches, high-order terms, and important implementation issues such as model-based sampling and computation delay compensation. Significantly, the high-order terms are introduced because of the large dc-link ripple. These high-order terms are unique to the SLIC and negligible in conventional high-inertia converters. A discrete-time large-signal model is built to capture the dc-link’s nonlinear dynamics, and the eigenvalues of a small-signal Jacobian matrix are analyzed with Floquet theory to evaluate stability, using the modular soft-switching solid-state transformer (M-S4T) as an example of the SLIC. Simulation and experimental results of an MVDC M-S4T verify the analysis and the predictive control method. Finally, the general application of the predictive control to low-inertia converters is compared against a conventional PI controller using a reduced dc-link active-front-end (AFE) rectifier as an example.

14 SOLAR ENERGY↗
DOE OSTI2021

Magnetic exchange interactions in the van der Waals layered antiferromagnet MnPSe 3

Two-dimensional van der Waals compounds with magnetic ions on a honeycomb lattice are hosts to a variety of exotic behavior. The magnetic interactions in one such compound, MnPSe 3 , are investigated with elastic and inelastic neutron scattering. Magnetic excitations are observed in the magnetically ordered regime and persist to temperatures well above the ordering temperature, T N =74K, consistent with low dimensional magnetic interactions. The inelastic neutron scattering results allow a model spin Hamiltonian to be presented that includes dominant intralayer interactions of J 1ab =0.45 meV, J 2ab =0.03 meV, J 3ab =0.19 meV, consistent with theoretical predictions. Furthermore, despite the quasi-2D behavior, appreciable interlayer interactions of J c =0.031(5) meV are required to model the data. No evidence for anisotropy in the form of a spin gap is observed in the data collected. The measurements on MnPSe 3 are contrasted with those on MnPS 3 and reveal a large increase in the interlayer exchange interaction in MnPSe 3 that may stabilize the similar ordering temperatures in the bulk compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2000

Optical Performance Modeling of FUSE Telescope Mirror

We describe the Metrology Data Processor (METDAT), the Optical Surface Analysis Code (OSAC), and their application to the image evaluation of the Far Ultraviolet Spectroscopic Explorer (FUSE) mirrors. The FUSE instrument - designed and developed by the Johns Hopkins University and launched in June 1999 is an astrophysics satellite which provides high resolution spectra (lambda/Delta(lambda) = 20,000 - 25,000) in the wavelength region from 90.5 to 118.7 nm The FUSE instrument is comprised of four co-aligned, normal incidence, off-axis parabolic mirrors, four Rowland circle spectrograph channels with holographic gratings, and delay line microchannel plate detectors. The OSAC code provides a comprehensive analysis of optical system performance, including the effects of optical surface misalignments, low spatial frequency deformations described by discrete polynomial terms, mid- and high-spatial frequency deformations (surface roughness), and diffraction due to the finite size of the aperture. Both normal incidence (traditionally infrared, visible, and near ultraviolet mirror systems) and grazing incidence (x-ray mirror systems) systems can be analyzed. The code also properly accounts for reflectance losses on the mirror surfaces. Low frequency surface errors are described in OSAC by using Zernike polynomials for normal incidence mirrors and Legendre-Fourier polynomials for grazing incidence mirrors. The scatter analysis of the mirror is based on scalar scatter theory. The program accepts simple autocovariance (ACV) function models or power spectral density (PSD) models derived from mirror surface metrology data as input to the scatter calculation. The end product of the program is a user-defined pixel array containing the system Point Spread Function (PSF). The METDAT routine is used in conjunction with the OSAC program. This code reads in laboratory metrology data in a normalized format. The code then fits the data using Zernike polynomials for normal incidence systems or Legendre-Fourier polynomials for grazing incidence systems. It removes low order terms from the metrology data, calculates statistical ACV or PSD functions, and fits these data to OSAC models for the scatter analysis. In this paper we briefly describe the laboratory image testing of FUSE spare mirror performed in the near and vacuum ultraviolet at John Hopkins University and OSAC modeling of the test setup performed at NASA/GSFC. The test setup is a double-pass configuration consisting of a Hg discharge source, the FUSE off-axis parabolic mirror under test, an autocollimating flat mirror, and a tomographic imaging detector. Two additional, small fold flats are used in the optical train to accommodate the light source and the detector. The modeling is based on Zernike fitting and PSD analysis of surface metrology data measured by both the mirror vendor (Tinsley) and JHU. The results of our models agree well with the laboratory imaging data, thus validating our theoretical model. Finally, we predict the imaging performance of FUSE mirrors in their flight configuration at far-ultraviolet wavelengths.

Saha, Timo T.↗
NASA NTRS2002

Geodetic Application of ROCSAT-3/COSMIC: Climate-Induced Time-Variable Gravity

The ROCSAT-3/COSMIC (Constellation Observing System for Meteorology, Ionosphere and Climate) mission consists of a constellation of 6 low-earth orbiting satellites. In conducting the atmospheric limb sounding using the GPS radio occultation technique (which is the main objective of the mission), the satellite orbits are precisely determined at any given moment by GPS "high-low" satellite-to-satellite tracking. These precise orbit determination (POD) data contain useful information about the Earth's gravitational field and its time variations, for both geophysical and climate-related research. Our previous simulations showed that the use of these orbit data can yield an order of magnitude improvement over the state-of-the-art global gravity model EGM96 out to degree and order 20 (spatial resolution of 1000 km), depending on the mission design and orbit adjustment scenario. In this paper, the temporal variation signals of low-degree harmonics are the subject matter. These signals can be obtained from POD at the 800 km operational altitude (where the non-gravitational forces is weaker and can be better modeled and removed) during the lifetime of the mission. The time-varying gravity is becoming an important data source for studying climate-related global changes, especially in anticipating the use of the time-variable gravity data from the GRACE mission which was recently launched into orbit. Although not as precise as what GRACE promises to achieve, with much denser spatial and temporal coverages provided by 6 satellites and hence greatly reduced aliasing errors COSMIC represents independent and complementary observations for the new time-variable gravity research. We will present simulation results based on the present mission scenario.

Chao, Benjamin F.↗
NASA NTRS2012

SLR Station Recovery, Center of Frame Motion, and Time Varying Gravity

Weekly station position estimates, beginning with 1993, are derived from the ITRF2008-based SLR processing of up to four satellites: Lageos 1, Lageos2, Starlette, and Stella. Helmert parameters obtained from c omparison of weekly SLR station positions and the a-priori SLRF2008 station complement are evaluated for geocenter motion and scale. Two me thods for modeling time varying gravity are employed in the SLR satel lite POD processing, with GGM03S serving as the static gravity field. Both methods forward model atmosphere gravity derived from 6-hour ECM WF pressure data. The standard approach applies an annual 20x20 field estimated from 4 years of GRACE data, and the IERS2003 recommended linear rates for C20, C30, C40, C21, and S21. The alternate approach us es a new set of low-order/degree 4x4 coefficients estimated weekly fr om SLR & DORIS processing to 10 satellites from 1993-2012. This exper imental tvg4x4 model has been shown to improve the TOPEX, Jason-1, and Jason-2 altimeter satellite orbits,. In this paper we apply the more detailed time-variable gravity modeling to the SLR satellite POD pro cessing and subsequent reference frame analyses. For this study we will evaluate the orbit differences (periodic and secular) for the satel lites concerned, characterize the impact on the station coordinate solutions, and the impact on reference frame parameters (geocenter and s cale).

Zelensky, Nikita P.↗
DOE OSTI2022

Analyzing rotational bands in odd-mass nuclei using effective field theory and Bayesian methods

We recently developed an Effective Field Theory (EFT) for rotational bands in odd-mass nuclei. Here we use EFT expressions to perform a Bayesian analysis of data on the rotational energy levels of 99 Tc, 155,157 Gd, 159 Dy, 167,169 Er, 167,169 Tm, 183 W, 235 U and 239 Pu. The error model in our Bayesian analysis includes both experimental and EFT truncation uncertainties. It also accounts for the fact that low-energy constants (LECs) at even and odd orders are expected to have different sizes. We use Markov Chain Monte Carlo (MCMC) sampling to explore the joint posterior of the EFT and error-model parameters and show both the LECs and the breakdown scale can be reliably determined. We extract the LECs up to fourth order in the EFT and find that, provided we correctly account for EFT truncation errors in our likelihood, results for lower-order LECs are stable as we go to higher orders. LEC results are also stable with respect to the addition of higher-energy data. We extract the expansion parameter for all the nuclei listed above and find a clear correlation between the extracted and the expected value of the inverse breakdown scale, W, based on the single-particle and vibrational energy scales. However, the W that actually determines the convergence of the EFT expansion is markedly smaller than would be naively expected based on those scales.

EFT↗
NASA NTRS1986

Analysis of AIS radiometry with emphasis on determination of atmospheric properties and surface reflectance

Airborne Imaging Spectrometer data from Mono Lake, California, were studied in order to establish spectral radiance of test areas under solar illumination. The objective is to provide a method of atmospheric correction for major absorbers from the spectrometer data themselves. Crucial to the analysis is radiometric calibration of the instrument. Good agreement is found between calculated and measured radiances for uniform surface targets (beaches), but simulations of atmospheric properties with LOWTRAN lead to unreasonably low values of atmospheric precipitable water. Absorptions from carbon dioxide are not detected in the AIS data, but are strongly present in the LOWTRAN model. The apparent low contrast of all atmospheric absorption bands leads to a study of contamination from overlapping spectral orders in the AIS data. The suspected contamination is shown unambiguously to be present beyond approximately 1500 nm and consists of an extra radiance term including atmospheric bands from the delta/2 wavelength interval. A rigorous removal of the unwanted spectral contamination does not seem possible for any data taken in the rock mode. Rough estimates for tree-mode observations might be pieced together is a suitable after-the-fact radiometric claibration of the instrument can be formulated.

Conel, J. E.↗
NASA NTRS2001

Aerodynamic Performance of Scale-Model Turbofan Outlet Guide Vanes Designed for Low Noise

The design of effective new technologies to reduce aircraft propulsion noise is dependent on an understanding of the noise sources and noise generation mechanisms in the modern turbofan engine. In order to more fully understand the physics of noise in a turbofan engine, a comprehensive aeroacoustic wind tunnel test programs was conducted called the 'Source Diagnostic Test.' The text was cooperative effort between NASA and General Electric Aircraft Engines, as part of the NASA Advanced Subsonic Technology Noise Reduction Program. A 1/5-scale model simulator representing the bypass stage of a current technology high bypass ratio turbofan engine was used in the test. The test article consisted of the bypass fan and outlet guide vanes in a flight-type nacelle. The fan used was a medium pressure ratio design with 22 individual, wide chord blades. Three outlet guide vane design configurations were investigated, representing a 54-vane radial Baseline configuration, a 26-vane radial, wide chord Low Count configuration and a 26-vane, wide chord Low Noise configuration with 30 deg of aft sweep. The test was conducted in the NASA Glenn Research Center 9 by 15-Foot Low Speed Wind Tunnel at velocities simulating the takeoff and approach phases of the aircraft flight envelope. The Source Diagnostic Test had several acoustic and aerodynamic technical objectives: (1) establish the performance of a scale model fan selected to represent the current technology turbofan product; (2) assess the performance of the fan stage with each of the three distinct outlet guide vane designs; (3) determine the effect of the outlet guide vane configuration on the fan baseline performance; and (4) conduct detailed flowfield diagnostic surveys, both acoustic and aerodynamic, to characterize and understand the noise generation mechanisms in a turbofan engine. This paper addresses the fan and stage aerodynamic performance results from the Source Diagnostic Test.

Hughes, Christopher E.↗
DOE OSTI2023

Reduced-Order Models of Static Power Grids based on Spectral Clustering

For large-scale interconnected power systems that cover large geographical areas, certain electrical studies are required so that appropriate decisions ensure system reliability and low cost. For such studies, it is often neither practical nor necessary to model in detail the entire power system, which is increasingly complex due to a more diverse range of grid assets to choose from in both short and long-term planning. The goal of this paper is to present a methodology to reduce the order of large-scale power networks based on spectral graph theory given that current methods for static network reduction are not scalable. A brief analysis of some spectral clustering properties to determine which graph Laplacian matrix should be used and why is included. The analysis shows that the utilization of the normalized graph Laplacian is more advantageous for clustering purposes. Techniques are proposed to approximate cost functions for the aggregated generators. This is done via linear regression. The reduced-order model obtained with the proposed methodology has an accuracy above 94% and solves the scalability issue commonly present in other reduction methods. If the utilization of the reduced-order model is either constrained to load levels above mid-peak demand, or cost functions of aggregated units are approximated via a piecewise quadratic approach, then the error distribution is in the order of 10^-3. .

Baquedano-Aguilar, Mario D.↗
DOE OSTI2023

Robust charge-density-wave correlations in the electron-doped single-band Hubbard model

There is growing evidence that the hole-doped single-band Hubbard and t–J models do not have a superconducting ground state reflective of the high-temperature cuprate superconductors but instead have striped spin- and charge-ordered ground states. Nevertheless, it is proposed that these models may still provide an effective low-energy model for electron-doped materials. Here we study the finite temperature spin and charge correlations in the electron-doped Hubbard model using quantum Monte Carlo dynamical cluster approximation calculations and contrast their behavior with those found on the hole-doped side of the phase diagram. We find evidence for a charge modulation with both checkerboard and unidirectional components decoupled from any spin-density modulations. These correlations are inconsistent with a weak-coupling description based on Fermi surface nesting, and their doping dependence agrees qualitatively with resonant inelastic x-ray scattering measurements. Our results provide evidence that the single-band Hubbard model describes the electron-doped cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Multiscale Reduced Order Modeling and Parameter Estimation for Climate Sciences

Several problems in earth system modeling are dependent on highly multiscale phenomena, such as turbulence, where computational modeling is challenging and expensive. This issue is exacerbated in atmospheric and oceanic domains, due to inherent high-dimensionality of the problem. One approach to this problem has been reduced order modeling (ROM); which aims to represent the key physics of the phenomena as a low-dimensional system. AI methods have huge potential in building accurate, stable ROMs and parameter estimation for these ROMs, as it requires extracting nonlinearities and patterns from simulation and/or observational data. Developing physics-based AI approaches specialized for the complexities of multiscale data, along with strategies to account for uncertainties, will revolutionize rapid modeling, analysis and decision making for earth system problems of practical interest.

58 GEOSCIENCES↗
NASA NTRS1984

Effects of dynamical heat fluxes on model climate sensitivity

A coupled high and low latitude radiative-dynamical model of the annual mean northern hemisphere has been constructed in order to study the interactions of the vertical and meridional heat fluxes and their feedback effect on model climate sensitivity. The model's climate sensitivity to solar constant changes and CO2 increases is investigated, and the effect of feedback in the dynamical fluxes on model climate sensitivity is examined. Nonlinear interactions between heat fluxes and other feedbacks such as radiation-temperature, ice albedo, and humidity are also discussed.

Wang, W.-C.↗
NASA NTRS1986

HCNH(+) - A new interstellar molecular ion

The first interstellar detection of HCNH(+) is reported. The J = 1-0, 2-1, and 3-2 rotational transitions of this molecule at 74, 148, and 222 GHz have been observed toward Sgr B2. Using a large velocity gradient model calculation, the column density of HCNH(+) is found to be about 4 x 10 to the 14th/sq cm, about one order of magnitude less than that estimated for HCO(+) and HCN in this source. Such a column density implies a fractional abundance of at least one to several orders of magnitude larger than predicted by numerous ion-molecule models. Coupled with a relatively low abundance of HCN and a small HNC/HCN ratio, this suggests that HCNH(+) is not channeled into HCN or HNC as rapidly as thought.

Ziurys, L. M.↗
NASA NTRS1993

Three-dimensional flow analysis inside turbomachinery stages with steady and unsteady Navier-Stokes method

This study presents a numerical method for solving the three-dimensional, Navier-Stokes equations for unsteady, viscous flow through multiple turbomachinery blade rows. The method solves the fully three-dimensional Navier-Stokes equations with an implicit scheme which is based on a control volume approach. A two-equation turbulence model with a low Reynolds number modification is employed in the present study. A third-order accurate upwinding scheme is used to approximate convection terms while a second order accurate central difference scheme is used for the discretization of viscous terms. A second-order accurate scheme is employed for the temporal discretization. The numerical method is applied to study the unsteady flow field of a subsonic turbine stage and the unsteady flow field inside a transonic, high-through-flow, axial compressor stage. The stage calculation is performed by coupling the stator and the rotor flow fields at each time step through an over-laid grid.

Copenhaver, W. W.↗
NASA NTRS1993

A normal stress subgrid-scale eddy viscosity model in large eddy simulation

The Smagorinsky subgrid-scale eddy viscosity model (SGS-EVM) is commonly used in large eddy simulations (LES) to represent the effects of the unresolved scales on the resolved scales. This model is known to be limited because its constant must be optimized in different flows, and it must be modified with a damping function to account for near-wall effects. The recent dynamic model is designed to overcome these limitations but is compositionally intensive as compared to the traditional SGS-EVM. In a recent study using direct numerical simulation data, Horiuti has shown that these drawbacks are due mainly to the use of an improper velocity scale in the SGS-EVM. He also proposed the use of the subgrid-scale normal stress as a new velocity scale that was inspired by a high-order anisotropic representation model. The testing of Horiuti, however, was conducted using DNS data from a low Reynolds number channel flow simulation. It was felt that further testing at higher Reynolds numbers and also using different flows (other than wall-bounded shear flows) were necessary steps needed to establish the validity of the new model. This is the primary motivation of the present study. The objective is to test the new model using DNS databases of high Reynolds number channel and fully developed turbulent mixing layer flows. The use of both channel (wall-bounded) and mixing layer flows is important for the development of accurate LES models because these two flows encompass many characteristic features of complex turbulent flows.

Horiuti, K.↗
DOE OSTI2023

BUQEYE guide to projection-based emulators in nuclear physics

The BUQEYE collaboration (Bayesian Uncertainty Quantification: Errors in Your effective field theory) presents a pedagogical introduction to projection-based, reduced-order emulators for applications in low-energy nuclear physics. The term emulator refers here to a fast surrogate model capable of reliably approximating high-fidelity models. As the general tools employed by these emulators are not yet well-known in the nuclear physics community, we discuss variational and Galerkin projection methods, emphasize the benefits of offline-online decompositions, and explore how these concepts lead to emulators for bound and scattering systems that enable fast and accurate calculations using many different model parameter sets. We also point to future extensions and applications of these emulators for nuclear physics, guided by the mature field of model (order) reduction. All examples discussed here and more are available as interactive, open-source Python code so that practitioners can readily adapt projection-based emulators for their own work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1999

Cryogenic Fuel Tank Draining Analysis Model

One of the technological challenges in designing advanced hypersonic aircraft and the next generation of spacecraft is developing reusable flight-weight cryogenic fuel tanks. As an aid in the design and analysis of these cryogenic tanks, a computational fluid dynamics (CFD) model has been developed specifically for the analysis of flow in a cryogenic fuel tank. This model employs the full set of Navier-Stokes equations, except that viscous dissipation is neglected in the energy equation. An explicit finite difference technique in two-dimensional generalized coordinates, approximated to second-order accuracy in both space and time is used. The stiffness resulting from the low Mach number is resolved by using artificial compressibility. The model simulates the transient, two-dimensional draining of a fuel tank cross section. To calculate the slosh wave dynamics the interface between the ullage gas and liquid fuel is modeled as a free surface. Then, experimental data for free convection inside a horizontal cylinder are compared with model results. Finally, cryogenic tank draining calculations are performed with three different wall heat fluxes to demonstrate the effect of wall heat flux on the internal tank flow field.

Greer, Donald↗
NASA NTRS2019

Serendipitous Geodesy from Bennu's Short-Lived Moonlets

The Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx; or OREx) spacecraft arrived at its target, near-Earth asteroid (101955) Bennu, on December 3, 2018. The OSIRIS-REx spacecraft has since collected a wealth of scientific information in order to select a suitable site for sampling. Shortly after insertion into orbit on December 31, 2018, particles were identified in starfield images taken by the navigation camera (NavCam 1). Several groups within the OSlRlS-REx team analyzed the particle data in an effort to better understand this newfound activity of Bennu and to investigate the potential sensitivity of the particles to Bennu's geophysical parameters. A number of particles were identified through automatic and manual methods in multiple images, which could be turned into short sequences of optical tracking observations. Here, we discuss the precision orbit determination (OD) effort focused on these particles at NASA GSFC, which involved members of the Independent Navigation Team (INT) in particular. The particle data are combined with other OSIRIS-REx tracking data (radiometric from OSN and optical landmark data) using the NASA GSFC GEODYN orbit determination and geodetic parameter estimation software. We present the results of our study, particularly those pertaining to the gravity field of Bennu. We describe the force modeling improvements made to GEODYN specifically for this work, e.g., with a raytracing-based modeling of solar radiation pressure. The short-lived, low-flying moonlets enable us to determine a gravity field model up to a relatively high degree and order: at least degree 6 without constraints, and up to degree 10 when applying Kaula-like regularization. We can backward- and forward-integrate the trajectory of these particles to the ejection and landing sites on Bennu. We assess the recovered field by its impact on the OSIRIS-REx trajectory reconstruction and prediction quality in the various mission phases (e.g., Orbital A, Detailed Survey, and Orbital B).

Mazarico, Erwan↗