Search NASA⌕ Search

SEARCH · Search NASA

Results for “material types”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Atomic Force Microscopy Thermally-Assisted Microsampling with Atmospheric Pressure Temperature Ramped Thermal Desorption/Ionization-Mass Spectrometry Analysis

The use of atomic force microscopy controlled nano-thermal analysis probes for reproducible spatially resolved thermally-assisted sampling of micrometer-sized areas (ca. 11 m 17 m wide 2.4 m deep) from relatively low number average molecular weight (M n < 3000) polydisperse thin films of poly(2-vinylpyridine) (P2VP) is presented. Following sampling, the nano-thermal analysis probes were moved up from the surface and the probe temperature ramped to liberate the sampled materials into the gas phase for atmospheric pressure chemical ionization and mass spectrometric analysis. Furthermore, the procedure and mechanism for material pickup, the sampling reproducibility and sampling size are discussed and the oligomer distribution information available from slow temperature ramps versus ballistic temperature jumps is presented. For the M n = 970 P2VP, the Mn and polydispersity index determined from the mass spectrometric data were in line with both the label values from the sample supplier and the value calculated from the simple infusion of a solution of polymer into the commercial atmospheric pressure chemical ionization source on this mass spectrometer. With a P2VP sample of higher Mn (M n = 2070 and 2970), intact oligomers were still observed (as high as m/z 2793 corresponding to the 26-mer), but a significant abundance of thermolysis products were also observed. In addition, the capability for confident identification of the individual oligomers by slowly ramping the probe temperature and collecting data dependent tandem mass spectra was also demonstrated. We also discuss the material type limits to the current sampling and analysis approach as well as possible improvements in nano-thermal analysis probe design to enable smaller area sampling and to enable controlled temperature ramps beyond the present upper limit of about 415°C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Structures, Local Atomic Environments, and Ion Diffusion Mechanisms of Scandium-Substituted Sodium Superionic Conductor (NASICON) Solid Electrolytes

The importance of exploring new solid electrolytes for all-solid-state batteries has led to significant interest in NASICON-type materials. In this work, the Sc 3+ -substituted NASICON compositions Na 3 Sc x Zr 2– x (SiO 4 ) 2- x (PO 4 ) 1+ x (termed N3) and Na 2 Sc y Zr 2- y (SiO 4 ) 1- y (PO 4 ) 2+ y (termed N2) ( x , y = 0–1) are studied as model Na + -ion conducting electrolytes for solid-state batteries. The influence of Sc 3+ substitution on the crystal structures and local atomic environments has been characterized by powder X-ray diffraction (XRD) and neutron powder diffraction (NPD), as well as solid-state 23 Na, 31 P, and 29 Si nuclear magnetic resonance (NMR) spectroscopy. A phase transition between 295 and 473 K from monoclinic C 2/ c to rhombohedral $R\bar{3}c$ is observed for the N3 compositions, while N2 compositions crystallize in a rhombohedral $R\bar{3}c$ unit cell in this temperature range. Alternating current (AC) impedance spectroscopy, molecular dynamics (MD), and high temperature 23 Na NMR studies are in good agreement, showing that, with a higher Sc 3+ concentration, the ionic conductivity (of about 10 -4 S/cm at 473 K) decreases and the activation energy for ion diffusion increases. 23 Na NMR experiments indicate that the nature of the Na + -ion motion is two-dimensional on the local atomic scale of NMR although the long-range diffusion pathways are three-dimensional. In addition, a combination of MD, bond valence, maximum entropy/Rietveld, and van Hove correlation methods has been used to reveal that the Na + -ion diffusion in these NASICON materials is three-dimensional and that there is a continuous exchange of sodium ions between Na(1) and Na(2) sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impacts of Focused Ion Beam Processing on the Fabrication of Nanoscale Functionalized Probes

Herein, we examine the impact of Ga + ion kinetic energy and the target material type on the extent of ion implantation and structural damage in atomic force microscopy probes made of Al 2 O 3 and ZnO manufactured by focused ion beam (FIB) using scanning transmission electron microscopy and energy-dispersive X-ray mapping. Penetration of Ga into the Al 2 O 3 lattice induced structural distortions and amorphization. For ZnO probes, Ga is uniformly dispersed across the surface, resulting in the formation of distinct clusters. Atom probe tomography further validates the Ga distributions in Al 2 O 3 and ZnO nanoprobes. Complementary Monte Carlo simulations with the transport of ions in the matter program indicated that the introduction of Ga + prompts the generation of cation and anion vacancies, an occurrence more pronounced in Al 2 O 3 compared to ZnO. In conclusion, this study not only enriches the knowledge of ion-matter interactions, but also serves as a practical guide for the fabrication of nanoscale functionalized AFM probes.

Al2O3↗

Monofluorination of Naphthyls Promotes the Cofacial π–π Stacking and Increases the Electron Mobility of Non-Planar Zinc(II) Complexes of Di(naphthylethynyl)azadipyrromethene

The homoleptic zinc(II) complex of [2,8-di(1-naphthylethynyl) 3,7-diphenyl 1,9-(4-hexylphenyl)azadipyrromethene (ZnL2) 2 ] is a promising non-planar non-fullerene acceptor for organic photovoltaic applications, but it has a relatively low electron mobility that may limit its performance. Here, we explored the fluorination of peripheral aryl groups to increase intermolecular cofacial π–π stacking interactions, which are desirable for electron transport. Here complexes with fluorine on the distal phenyls [Zn(1F-L2) 2 ], on the naphthyls [Zn(2F-L2) 2 ], and on both [Zn(3F-L2) 2 ] were synthesized and characterized. All three complexes had similar optical and electrochemical properties. The crystal packing structure of Zn(2F-L2) 2 and Zn(3F-L2) 2 revealed cofacial parallel-displaced π–π stacking between the fluorinated 1-naphthylethynyl groups. Such a cofacial orientation was not observed in Zn(L2) 2 crystals, suggesting that fluorination of the naphthyl groups promotes the cofacial π–π stacking orientation. The hole mobility increased from 1.0 × 10 –4 cm 2 V –1 s –1 for Zn(L2) 2 to 0.8–1.0 × 10 –3 cm 2 V –1 s –1 for the fluorinated complexes. Fluorination on the naphthyl groups increased the electron mobility from 4.2 × 10 –5 cm 2 V –1 s –1 for Zn(L2) 2 and Zn(1F-L2) 2 to 2.0 × 10 –4 cm 2 V –1 s –1 for Zn(2F-L2) 2 and Zn(3F-L2) 2 , consistent with cofacial π–π stacking being favorable for electron transport. The three complexes were tested in OPVs using regioregular poly(3-hexylthiophene) (P3HT) as the p-type material, and the best power conversion efficiencies were 5.2, 5.4, and 5.8% for Zn(2F-L2) 2 , Zn(1F-L2) 2 , and Zn(3F-L2) 2 , respectively, compared to 5.5% for Zn(L2) 2 . The fluorination combination found in Zn(3F-L2) 2 resulted in the best device performance. This study points to a viable strategy to increase the electron mobility and performance of non-planar zinc(II) complexes of azadipyrromethene.

36 MATERIALS SCIENCE↗

Ab Initio Simulation Explains the Enhancement of Catalytic Oxygen Evolution on CaMnO 3

Experimental results have shown promising catalytic activity for the oxygen evolution reaction (OER) on the perovskite-type material CaMnO 3 . Through density functional theory investigations, we study the OER mechanism on CaMnO 3 , on the basis of a thermodynamic stability approach. Our results reveal that the formation of Mn vacancies caused by the solubility of Mn enhances lattice oxygen activity, which then reduces the energy of the adsorbate *OOH and therefore loosens the lower overpotential limit predicted from the “scaling relationship”. This effect suggests that, by doping manganite oxides with soluble elements, we could enhance their OER catalytic activities due to the high surface lattice oxygen activity induced by surface metal ion vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Characterization of Degradation Modes of High-Voltage Li x Ni 0.33 Mn 0.33 Co 0.33 O 2 Electrodes

While deeply charged high-voltage cathodes can improve battery energy density, understanding and preventing any accelerated cell degradation is crucial to practical success. Here, to analyze the degradation of LiNi x Mn y Co 1–x–y O 2 (NMC) type material charged to 4.3 and 4.5 V, a physics-based model is applied to cycling data to obtain parameter estimates indicative of degradation modes, which are validated by simple electrochemical measurements and further interpreted by materials characterization. Growth rates of interfacial impedance and active material loss are greater at 4.5 V, as might be expected. However, when charged to 4.5 V, degradation rates are initially lower at a cycling C-rate of 1.0 C than at 0.5 C. Once degradation mode changes are quantified, simulations evaluate the contribution of individual degradation mode to performance losses and provide estimates of the energy-power correlation (Ragone plots) of cells after cycling.

25 ENERGY STORAGE↗

Effect of Pore Connectivity on Li Dendrite Propagation within LLZO Electrolytes Observed with Synchrotron X-ray Tomography

Li 7 La 3 Zr 2 O 12 (LLZO) is a garnet type material that demonstrates promising characteristics for all solid-state battery applications due to its high Li-ion conductivity and its compatibility with Li metal. The primary limitation of LLZO is the propensity for short-circuiting at low current densities. Microstructure features such as grain boundaries, pore character, and density all contribute to this shorting phenomenon. Toward the goal of understanding structure-processing relationships for practical design of solid electrolytes, the present study tracks structural transformations in solid electrolytes processed at three different temperatures (1000, 1050 and 1150 °C) using synchrotron x-ray tomography. A sub volume of 300 μm 3 captures the heterogeneity of the solid electrolyte microstructure while minimizing the computational intensity associated with 3D reconstructions. While the porosity decreases with increasing temperature, the underlying connectivity of the pore region increases. In conclusion, solid electrolytes with interconnected pores short circuit at lower critical current densities than samples with less connected pores.

36 MATERIALS SCIENCE↗

Codoping in SnTe: Enhancement of Thermoelectric Performance through Synergy of Resonance Levels and Band Convergence

We report a significant enhancement of the thermoelectric performance of p-type SnTe over a broad temperature plateau with a peak ZT value of similar to 1.4 at 923 K through In/Cd codoping and a CdS nanostructuring approach. Indium and cadmium play different but complementary roles in modifying the valence band structure of SnTe. Specifically, In-doping introduces resonant levels inside the valence bands, leading to a considerably improved Seebeck coefficient at low temperature. Cd-doping, however, increases the Seebeck coefficient of SnTe remarkably in the mid- to high-temperature region via a convergence of the light and heavy hole bands and an enlargement of the band gap. Combining the two dopants in SnTe yields enhanced Seebeck coefficient and power factor over a wide temperature range due to the synergy of resonance levels and valence band convergence, as demonstrated by the Pisarenko plot and supported by first-principles band structure calculations. Moreover, these codoped samples can be hierarchically structured on all scales (atomic point defects by doping, nanoscale precipitations by CdS nanostructuring, and mesoscale grains by SPS treatment) to achieve highly effective phonon scattering leading to strongly reduced thermal conductivities. In addition to the high maximum ZT the resultant large average ZT of similar to 0.8 between 300 and 923 K makes SnTe an attractive p-type material for high-temperature thermoelectric power generation.

Tan, Gangjian↗

A rapidly-reversible absorptive and emissive vapochromic Pt(II) pincer-based chemical sensor

Selective, robust and cost-effective chemical sensors for detecting small volatile-organic compounds (VOCs) have widespread applications in industry, healthcare and environmental monitoring. Here we design a Pt(II) pincer-Type material with selective absorptive and emissive responses to methanol and water. The yellow anhydrous form converts reversibly on a subsecond timescale to a red hydrate in the presence of parts-per-Thousand levels of atmospheric water vapour. Exposure to methanol induces a similarly-rapid and reversible colour change to a blue methanol solvate. Stable smart coatings on glass demonstrate robust switching over 10 4 cycles, and flexible microporous polymer membranes incorporating microcrystals of the complex show identical vapochromic behaviour. The rapid vapochromic response can be rationalised from the crystal structure, and in combination with quantum-chemical modelling, we provide a complete microscopic picture of the switching mechanism. We discuss how this multiscale design approach can be used to obtain new compounds with tailored VOC selectivity and spectral responses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lead halide perovskites for photocatalytic organic synthesis

Abstract Nature is capable of storing solar energy in chemical bonds via photosynthesis through a series of C–C, C–O and C–N bond-forming reactions starting from CO 2 and light. Direct capture of solar energy for organic synthesis is a promising approach. Lead (Pb)-halide perovskite solar cells reach 24.2% power conversion efficiency, rendering perovskite a unique type material for solar energy capture. We argue that photophysical properties of perovskites already proved for photovoltaics, also should be of interest in photoredox organic synthesis. Because the key aspects of these two applications are both relying on charge separation and transfer. Here we demonstrated that perovskites nanocrystals are exceptional candidates as photocatalysts for fundamental organic reactions, for example C–C, C–N and C–O bond-formations. Stability of CsPbBr 3 in organic solvents and ease-of-tuning their bandedges garner perovskite a wider scope of organic substrate activations. Our low-cost, easy-to-process, highly-efficient, air-tolerant and bandedge-tunable perovskites may bring new breakthrough in organic chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of residual palladium on the performance of organic electrochemical transistors

Organic electrochemical transistors are a promising technology for bioelectronic devices, with applications in neuromorphic computing and healthcare. The active component enabling an organic electrochemical transistor is the organic mixed ionic-electronic conductor whose optimization is critical for realizing high-performing devices. In this study, the influence of purity and molecular weight is examined for a p-type polythiophene and an n-type naphthalene diimide-based polymer in improving the performance and safety of organic electrochemical transistors. Our preparative GPC purification reduced the Pd content in the polymers and improved their organic electrochemical transistor mobility by ~60% and 80% for the p- and n-type materials, respectively. These findings demonstrate the paramount importance of removing residual Pd, which was concluded to be more critical than optimization of a polymer’s molecular weight, to improve organic electrochemical transistor performance and that there is readily available improvement in performance and stability of many of the reported organic mixed ionic-electronic conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exciton polaron formation and hot-carrier relaxation in rigid Dion–Jacobson-type two-dimensional perovskites

The efficiency of two-dimensional Dion–Jacobson-type materials relies on the complex interplay between electronic and lattice dynamics; however, questions remain about the functional role of exciton–phonon interactions. Here we establish the robust polaronic nature of the excitons in these materials at room temperature by combining ultrafast spectroscopy and electronic structure calculations. We show that polaronic distortion is associated with low-frequency (30–60 cm –1 ) lead iodide octahedral lattice motions. More importantly, we discover how targeted ligand modification of this two-dimensional perovskite structure manipulates exciton–phonon coupling, exciton polaron population and carrier cooling. At high excitation density, stronger exciton–phonon coupling increases the hot-carrier lifetime, forming a hot-phonon bottleneck. Furthermore, our study provides detailed insight into the exciton–phonon coupling and its role in carrier cooling in two-dimensional perovskites relevant for developing emerging hybrid semiconductor materials with tailored properties.

36 MATERIALS SCIENCE↗

Electronic properties and optical spectra of donor–acceptor conjugated organic polymers

Organic semiconductors based on conjugated donor-acceptor (D–A) polymers are a unique platform for electronic, spintronic, and energy-harvesting devices. Understanding the electronic structure of D–A polymers with a small band gap is essential for developing next-generation technologies. Here, we investigate the electronic structure and optical spectra of cyclopentadithiophene-based closed/open-shell D–A polymers using density functional theory and the Bethe–Salpeter equation based on G 0 W 0 approximation. We explored the role of different acceptor units and chemical substitutions on the structural changes and, more importantly, electronic, optical, and dielectric behavior. We found that the computed first exciton peak of the polymers agreed well with the available experimentally measured optical gap. Furthermore, D–A polymers with open-shell character display higher dielectric constant than the closed-shell polymers. We show that the exceptional performance of polycyclopentadithiophene-thiophenylthiadiazoloquinoxaline (PCPDT-TTQ) as a scalable n-type material for Faradaic supercapacitors can be partly ascribed to its elevated dielectric constant. Consequently, these D–A polymers, characterized by their high dielectric constants, exhibit significant potential for various applications, including energy storage, organic electronics, and the production of dielectric films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new lithium-rich anti-spinel in Li–O–Br system

In spinel-type materials currently known, the divalent anions are arranged in a closed-pack lattice and cations of various valences occupy some or all of the tetrahedral and octahedral sites. We report here the first discovery of an ‘‘electronically inverted’’ antispinel. Furthermore, the new material, crystallized in a defect spinel structure, was obtained from the dehydration of Li 5 Br(OH) 4 under moderate pressure and temperature conditions.

36 MATERIALS SCIENCE↗

Thermoelectric properties of AMg 2 X 2 , AZn 2 Sb 2 (A = Ca, Sr, Ba; X = Sb, Bi), and Ba 2 ZnX 2 (X = Sb, Bi) Zintl compounds

In this paper, we report a theoretical investigation of the electronic structure and transport properties of eleven Zintl compounds including nine 122 phases (AMg 2 X 2 , AZn 2 Sb 2 (A = Ca, Sr, Ba; X = Sb, Bi)) and two 212 phases (Ba 2 ZnX 2 (X = Sb, Bi)). The electronic structures and electrical transport properties are studied using ab initio calculations and semi-classical Boltzmann theory within the constant relaxation time approximation. All the compounds are semiconducting. We find that the n-type 122 phases with the CaAl 2 Si 2 structure type show better performance than p-type materials due to the multi-valley degeneracy with anisotropic carrier pockets at and near the conduction band minimum. The pocket anisotropy is beneficial in achieving high conductivity and Seebeck coefficient simultaneously. This mechanism yields substantial improvement in the power factor. Finally, the general performance of 212 phases is inferior to that of the 122 phases, with the Ba 2 ZnSb 2 compound showing better performance.

36 MATERIALS SCIENCE↗

Ultralow thermal conductivity in diamondoid lattices: high thermoelectric performance in chalcopyrite Cu 0.8+y Ag 0.2 In 1–y Te 2

Because of its unique transport properties, CuInTe 2 has been considered as a promising p-type material for thermoelectric applications. However, its diamondoid structure gives it a high intrinsic lattice thermal conductivity that greatly limits its thermoelectric performance. In this study, we demonstrate that Ag alloying gives rise to an extremely low lattice thermal conductivity of 0.47 W m –1 K –1 for Cu 0.8 Ag 0.2 InTe 2 at 850 K. Moreover, we found Cu doping significantly improves the carrier mobility while simultaneously increasing the carrier concentraton. As a result, the power factor of Cu 0.8 Ag 0.2 InTe 2 increases and a maximum ZT of ~1.6 is achieved at 850 K. Both DFT calculations and low temperature heat capacity measurements suggest a strong interaction between low frequency optical phonons and heat carrying acoustic phonons, which is derived from the weak Ag–Te bonding. Here, this strong phonon coupling decreases the Debye temperature and induces a low sound velocity.

36 MATERIALS SCIENCE↗

Unveiling a high capacity multi-redox (Nb 5+ /Nb 4+ /Nb 3+ ) NASICON-Nb 2 (PO 4 ) 3 anode for Li- and Na-ion batteries

Sodium superionic conductor (NASICON)-type materials are widely explored as Li- and Na-ion cathodes and solid-state electrolytes but are largely ignored as anodes due to their lower capacities and higher intercalation voltages, which reduce the overall energy densities of Li- and Na-ion batteries (LIBs and SIBs). Herein, we unveil high capacity multi-redox empty NASICON-Nb 2 (PO 4 ) 3 as a potential anode material for LIBs and SIBs, which reversibly delivers 167 and 150 mA h g -1 at the average voltages of 1.86 V vs. Li + /Li 0 and 1.46 V vs. Na + /Na 0 , respectively. The Li and Na intercalation reactions proceed via multiple phase transitions, leading to short-range ordered Li 3 Nb 2 (PO 4 ) 3 and triclinic (P$\overline{1}$ with combining macron]) Na 3 Nb 2 (PO 4 ) 3 , as revealed by in situ X-ray diffraction studies. Our density functional theory calculations are also in agreement with the in situ measurements in predicting a stable Na 3 Nb 2 (PO 4 ) 3 composition in the Na–Nb 2 (PO 4 ) 3 pseudo-binary system. X-ray absorption spectroscopy confirms the participation of multi-redox Nb 5+ /Nb 4+ /Nb 3+ couples. The Nb 2 (PO 4 ) 3 anode delivers capacities greater than 124 and 106 mA h g -1 at 1C rate in Li and Na cells, respectively. In conclusion, pairing Nb 2 (PO 4 ) 3 with suitable cathodes and electrolytes can lead to high energy density batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗