Search NASA⌕ Search

SEARCH · Search NASA

Results for “millimeter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Experimental millimeter-wave personal satellite communications system

Communications Research Laboratory (CRL) has investigated an advanced millimeter (mm)-wave satellite communications system for personal use. Experiments in mm-wave personal satellite communication are to be conducted for 3 years using Japan's Engineering Test Satellite VI (ETS-VI). This paper describes an experimental mm-wave (43/38 GHz) personal satellite communication system, including an onboard transponder and an earth terminal. The on-board transponder is almost completed, and the ground experiment system is still in the design stage. The transponder employs advanced mm-wave solid state technology. It uses 38 GHz high power solid state amplifiers to accelerate the development of mm-wave solid state devices which are indispensable to personal earth terminals. The transponder consists of a 43 GHz receiver with a built-in low noise amplifier, an IF filter section with very narrow bandwidth to improve the carrier-to-noise power ratio of the weak personal communication signal, and two high power amplifiers using newly developed high power Gallium Arsenide (GaAs) metal-semiconductor field effect transistors (MESFETs).

Suzuki, Yoshiaki↗

High-performance packaging for monolithic microwave and millimeter-wave integrated circuits

Packaging schemes were developed that provide low-loss, hermetic enclosure for advanced monolithic microwave and millimeter-wave integrated circuits (MMICs). The package designs are based on a fused quartz substrate material that offers improved radio frequency (RF) performance through 44 gigahertz (GHz). The small size and weight of the packages make them appropriate for a variety of applications, including phased array antenna systems. Packages were designed in two forms; one for housing a single MMIC chip, the second in the form of a multi-chip phased array module. The single chip array module was developed in three separate sizes, for chips of different geometry and frequency requirements. The phased array module was developed to address packaging directly for antenna applications, and includes transmission line and interconnect structures to support multi-element operation. All packages are fabricated using fused quartz substrate materials. As part of the packaging effort, a test fixture was developed to interface the single chip packages to conventional laboratory instrumentation for characterization of the packaged devices. The package and test fixture designs were both developed in a generic sense, optimizing performance for a wide range of possible applications and devices.

Shalkhauser, K. A.↗

Millimeter and microwave activity of the sun

Preliminary results of high-spatial-resolution millimeter observations of recent solar flares carried out with the Berkeley-Illinois-Maryland Array are presented. Findings obtained from multifrequency observations using the VLA are reported. The time profiles of several bursts during March 1989 are presented. Most of the bursts were impulsive and short-lived, and a number of longer-duration bursts were observed as well. All the bursts were fairly weak, with none exceeding 1 sfu of correlated amplitude. A number had rise times less than the available resolution of 10 sec. VLA observations in September 1988 showed that there is exceptionally good correspondence between the 1.5-GHz radio sources and the regions which are dark in He 10830 images and bright in Ca images.

Kundu, M. R.↗

High-performance packaging for monolithic microwave and millimeter-wave integrated circuits

Packaging schemes are developed that provide low-loss, hermetic enclosure for enhanced monolithic microwave and millimeter-wave integrated circuits. These package schemes are based on a fused quartz substrate material offering improved RF performance through 44 GHz. The small size and weight of the packages make them useful for a number of applications, including phased array antenna systems. As part of the packaging effort, a test fixture was developed to interface the single chip packages to conventional laboratory instrumentation for characterization of the packaged devices.

Shalkhauser, K. A.↗

A millimeter-wave radiometer technique for measuring ice thickness on the surface of the Space Shuttle's external fueltank

The presence of ice on the outside surface of the external tanks of a Space Shuttle can be detrimental to the launch and it is important to detect its presence and measure its thickness. A description is given of the design of a millimeter-wave radiometer system developed for this purpose. The design is based on model calculations and measurements of the emission properties of an external tank panel, performed at 35, 94 and 140 GHz.

Ulaby, F. T.↗

Millimeter-wave observations of Saturn, Uranus, and Neptune - CO and HCN on Neptune

Saturn, Uranus, and Neptune were observed at millimeter wavelengths with the IRAM 30 m telescope. The major result is the detection of CO and HCN in Neptune's stratosphere, with respective mixing ratios of (6.5 +/- 3.5) x 10 exp -7 and (3 +/- 1.5) x 10 exp -10. CO seems to be present in Neptune's troposphere as well and to slowly decrease with altitude (scale height about 200 km). HCN is probably formed from reactions between CH3 and N, which can be supplied in sufficient amounts by escape from Triton's atmosphere. The origin of CO, however, is more problematic, because: (1) thermochemical models fail to reproduce the observed abundance by a factor of about 1000; and (2) an external source would require a very large flux of oxygen. CO appears to be at least 15 times less abundant on Uranus than on Neptune. Finally, an upper limit of 10 exp -7 for CO in Saturn's stratosphere suggests an internal origin for Saturnian CO.

Rosenqvist, Jan↗

Dependence of millimeter wave surface resistance on the deposition parameters of laser ablated YBa2Cu3O(x) thin films

Measurements of millimeter-wave surface resistance versus temperature have been performed for YBa2Cu3O(x) thin films on 100 line-type SrTiO(3) substrates using a TE(011) cylindrical copper cavity at 80 GHz. The 0.6-micron thick films were grown at several deposition temperatures in the range 690 C to 810 C by means of a pulsed excimer laser ablation technique. A surface resistance minimum (60 milliohm at 77 K) near 770 C is shown to correlate with a minimum in c-axis lattice parameter (11.72 A). The highest value of Tc also occurs near this temperature. The surface resistance of films deposited at 790 C on 110 line-type LaAlO3 subtrates is lower, reaching 8 milliohm at 98 GHz and 80 K, demonstrating the influence of substate material on film quality.

Wosik, J.↗

Millimeter wave surface resistance of grain-aligned Y1Ba2Cu3O(x) bulk material

Measurements are reported of the millimeter-wave surface resistance of grain-aligned YBa2Cu3O(x) bulk material grown by a liquid-phase process. The measurements were performed by replacing the endplate of a TE(011) cylindrical copper cavity with the superconducting sample. Surface resistance was measured for samples with surfaces oriented perpendicular and parallel to the c-axis of the grains. For the parallel configuration, the surface resistance at 77 K and 80 GHz is given. For a very well-aligned sample with a very low density of Y2BaCuO(y) precipitates, measured in the perpendicular configuration, the transition width (10-90 percent) is about 2 K and the surface resistance is derived at 88 K. The effect of microstructure on surface resistance is discussed.

Wosik, J.↗

An extension of the high-resolution millimeter- and submillimeter-wave spectrum of methanol to high angular momentum quantum numbers

The high-resolution laboratory millimeter- and submillimeter-wave spectra of C-12H(3)OH and C-13H(3)OH have been extended to include transitions involving significantly higher angular momentum quantum numbers than studied previously. For C-12H(3)OH, the data set now includes 549 A torsional substate transitions and 524 E torsional substate transitions through J is not greater than 24, exclusive of blends. For C-13H(3)OH the data set now includes 453 A torsional substate transitions and 440 E torsional substate transitions through J is not greater than 24, exclusive of blends. The extended internal axis method Hamiltonian has been used to analyze the transitions to experimental accuracy. The molecular constants determined by this approach have been used to predict accurately the frequencies of many transitions through J = 25 not measured in the laboratory.

Anderson, Todd↗

Improved Grid-Array Millimeter-Wave Amplifier

Improved grid-array amplifiers operating at millimeter and submillimeter wavelengths developed for use in communications and radar. Feedback suppressed by making input polarizations orthogonal to output polarizations. Amplifier made to oscillate by introducing some feedback. Several grid-array amplifiers concatenated to form high-gain beam-amplifying unit.

Rosenberg, James J.↗

A millimeter-wave radiometer for detecting microbursts

This paper describes a millimeter-wave radiometer for the detection of wind shear from airborne platforms or at airport terminals. This proposed instrument will operate near the group of atmospheric oxygen absorptions centered near 60 GHz, which it will use to sense temperature from a distance. The instrument will use two channels to provide two different temperature measurements, providing the basis for solution of two equations in two unknowns, which are range to the wind shear plume and its temperature. A third channel will measure ambient atmospheric temperature. Depending on the temperature difference between the wind-shear plume and ambient, the standard deviation of range measurement accuracy is expected to be about 1 km at 5 km range, while the temperature measurement standard deviation will be about one-fourth the temperature difference between plume and ambient at this range. The instrument is expected to perform usefully at ranges up to 10 km, giving adequate warning of the presence of wind shear even for high performance jet aircraft. Other atmospheric hazards which might be detected by this radiometer include aircraft wakes and vortices, clear-air turbulence, and wind rotors, although the latter two phenomena would be detected by an airborne version of the instrument. A separate radiometer channel will be provided in the proposed instrument to detect aircraft wakes and vortices based on perturbation of the spectrum of microscopic atmospheric temperature fluctuations caused by the passage of large aircraft.

Mcmillan, Robert↗

Monolithic millimeter-wave diode array beam controllers: Theory and experiment

In the current work, multi-function beam control arrays have been fabricated and have successfully demonstrated amplitude control of transmitted beams in the W and D bands (75-170 GHz). While these arrays are designed to provide beam control under DC bias operation, new designs for high-speed electronic and optical control are under development. These arrays will fill a need for high-speed watt-level beam switches in pulsed reflectometer systems under development for magnetic fusion plasma diagnostics. A second experimental accomplishment of the current work is the demonstration in the 100-170 GHz (D band) frequency range of a new technique for the measurement of the transmission phase as well as amplitude. Transmission data can serve as a means to extract ('de-embed') the grid parameters; phase information provides more complete data to assist in this process. Additional functions of the array beam controller yet to be tested include electronically controlled steering and focusing of a reflected beam. These have application in the areas of millimeter-wave electronic scanning radar and reflectometry, respectively.

Sjogren, L. B.↗

Varactor diodes for millimeter and submillimeter wavelengths

Whisker-contacted GaAs Schottky barrier varactor diodes are the most common high-frequency multiplier element in use today. They are inherently simple devices that have very high frequency response and have been used to supply local oscillator power for Schottky heterodyne receivers to frequencies approaching 700 GHz. This paper discusses the development of improved varactor diode technology for space based applications at millimeter and submillimeter wavelengths.

Rizzi, Brian J.↗

A Schottky/2-DEG varactor diode for millimeter and submillimeter wave multiplier applications

A new Schottky diode is investigated for use as a multiplier element in the millimeter and submillimeter wavelength regions. The new diode is based on the Schottky contact at the edge of a 2-dimensional electron gas (2-DEG). As a negative voltage is applied to the Schottky contact, the depletion layer between the Schottky contact and the 2-DEG expands and the junction capacitance decreases, resulting in a nonlinear capacitance-voltage characteristic. In this paper, we outline the theory, design, fabrication, and evaluation of the new device. Recent results include devices having cutoff frequencies of 1 THz and above. Preliminary multiplier results are also presented.

Peatman, W. C. B.↗

Resonant tunneling diodes as sources for millimeter and submillimeter wavelengths

High-quality Resonant Tunneling Diodes have been fabricated and tested as sources for millimeter and submillimeter wavelengths. The devices have shown excellent I-V characteristics with peak-to-valley current ratios as high as 6:1 and current densities in the range of 50-150 kA/cm(exp 2) at 300 K. Used as local oscillators, the diodes are capable of state of the art output power delivered by AlGaAs-based tunneling devices. As harmonic multipliers, a frequency of 320 GHz has been achieved by quintupling the fundamental oscillation of a klystron source.

Vanbesien, O.↗

A model-based approach for detection of objects in low resolution passive millimeter wave images

A model-based vision system to assist the pilots in landing maneuvers under restricted visibility conditions is described. The system was designed to analyze image sequences obtained from a Passive Millimeter Wave (PMMW) imaging system mounted on the aircraft to delineate runways/taxiways, buildings, and other objects on or near runways. PMMW sensors have good response in a foggy atmosphere, but their spatial resolution is very low. However, additional data such as airport model and approximate position and orientation of aircraft are available. These data are exploited to guide our model-based system to locate objects in the low resolution image and generate warning signals to alert the pilots. Also analytical expressions were derived from the accuracy of the camera position estimate obtained by detecting the position of known objects in the image.

Kasturi, Rangachar↗

Frequency multipliers for millimeter and submillimeter wavelengths

All-solid-state local oscillators in the terahertz frequency range are especially needed for space-borne radio astronomy and remote sensing of the atmosphere. Because solid-state oscillators cannot yet produce the necessary local oscillator power at submillimeter wavelengths, frequency multipliers are needed. So far, submillimeter-wave frequency multipliers are mainly based on a whisker-contacted Schottky diode as the nonlinear element. This paper discusses the multiplier theory and tools for analysis and design of millimeter- and submillimeter-wave multipliers. Experimental work is reviewed. The Schottky diode model at submillimeter frequencies, use of Schottky multiplier chains versus direct higher-order multipliers, and the effect of cooling on Schottky diode multipliers are discussed. Alternative diodes such as the high electron mobility varactor, the barrier-intrinsic n(+) diode, the barrier-n-n(+) diode, the quantum well diode, and the single barrier varactor are discussed, with attention also given to their potential as submillimeter frequency multipliers.

Raisanen, Antti V.↗

Magnetic field in a low-mass protostar disk - Millimeter polarimetry of IRAS 16293-2422

We have measured the millimeter polarization of IRAS 16293-2422, a low-mass protostar candidate embedded in the east streamer of the Rho Ophiuchi dark cloud. The source has a linear polarization at 1.1 mm of (2.8 +/- 0.5) percent at a position angle of 144 deg +/- 5 deg with a 19 arcsec beam. If this polarization is due to thermal emission from magnetically aligned nonspherical grains in a dust disk around the central (proto)star, then the magnetic field threads across the disk at a position angle of 54 deg +/- 5 deg projected on the sky. This direction is the same as that of the minor axis of the elongated circumstellar gas disk (of scale 1600 AU) and of the direction of one of the quadratic outflows. There is no positive evidence for a twisted magnetic field in the dust disk, which constrains the hydromagnetic models for molecular outflows, at least for this source.

Tamura, Motohide↗