SEARCH · Search NASA

Results for “open loop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Energy management of three-dimensional minimum-time intercept

A real-time computer algorithm to control and optimize aircraft flight profiles is described and applied to a three-dimensional minimum-time intercept mission. The proposed scheme has roots in two well known techniques: singular perturbations and neighboring-optimal guidance. Use of singular-perturbation ideas is made in terms of the assumed trajectory-family structure. A heading/energy family of prestored point-mass-model state-Euler solutions is used as the baseline in this scheme. The next step is to generate a near-optimal guidance law that will transfer the aircraft to the vicinity of this reference family. The control commands fed to the autopilot (bank angle and load factor) consist of the reference controls plus correction terms which are linear combinations of the altitude and path-angle deviations from reference values, weighted by a set of precalculated gains. In this respect the proposed scheme resembles neighboring-optimal guidance. However, in contrast to the neighboring-optimal guidance scheme, the reference control and state variables as well as the feedback gains are stored as functions of energy and heading in the present approach. Some numerical results comparing open-loop optimal and approximate feedback solutions are presented.

Kelley, H. J.↗

NASA NTRS1985

Implicit dual control for general stochastic systems

A new implicit dual technique is presented for stochastic adaptive control synthesis. In this technique, denoted as the method of utility costs (MOUC), a new control policy is derived from a known starting control policy by using a single iteration in time-varying policy space. An important result is that the new control policy yields a corresponding improvement in adaptive performance relative to the known starting policy. Since the starting policy can be chosen arbitrarily, the new policy has potentially superior performance relative to any existing design. Unlike other implicit dual designs, the MOUC can be applied to systems having constrained inputs, discontinuities, discrete valued disturbances, as well as in situations where the variances of the associated process statistics are large. A numerical example is given in which a controller is synthesized to provide improved performance relative to the Open-Loop Feedback policy of Dreyfus.

Bayard, D. S.↗

NASA NTRS1985

Simulation study of an automatic trim system for reducing the control forces on a light twin after an engine failure

An automatic trim system for reducing the control forces after an engine failure on a light twin has been investigated on the Langley General Aviation Simulator. The system schedules open-loop trim tab deflections as a function of differential propeller slipstream dynamic pressure and freestream dynamic pressure. The system is described and the airplane-system static and dynamic characteristics are documented. Three NASA research pilots evaluated the effectiveness of the system for takeoff and landing maneuvers. A variety of off-nominal system characteristics were studied. The system was judged to be generally beneficial, providing a 2 to 3 point improvement in pilot rating for the tasks used in the evaluations.

Stewart, E. C.↗

NASA NTRS1985

Joule-Thomson valves for long term service in space cryocoolers

Joule-Thomson valves for small cryocoolers have throttling passages on the order of 0.1 millimeter in diameter. Consequently, they can become plugged easily and stop the operation of the cooler. Plugging can be caused by solid particles, liquids or gases. Plugging is usually caused by the freezing of contaminant gases from the process stream. In small open loop coolers and in closed loop coolers where periodic maintenance is allowed, the problem is overcome by using careful assembly techniques, pure process gases, warm filters and cold adsorbers. A more thorough approach is required for closed loop cryocoolers which must operate unattended for long periods. This paper presents the results of an effort to solve this problem. The causes of plugging are examined, and various ways to eliminate plugging are discussed. Finally, the development of a J-T defroster is explained. It is concluded that a combination of preventive measures and a defroster will reduce the chance of cooler failure by plugging to such a degree that J-T coolers can be used for long term space missions.

Lester, J. M.↗

NASA NTRS1986

Simulation studies of alternate longitudinal control systems for the space shuttle orbiter in the landing regime

Simulations of the space shuttle orbiter in the landing task were conducted by the NASA Ames-Dryden Flight Research Facility using the Ames Research Center vertical motion simulator (VMS) and the total in-flight simulator (TIFS) variable-stability aircraft. Several new control systems designed to improve the orbiter longitudinal response characteristics were investigated. These systems improved the flightpath response by increasing the amount of pitch-rate overshoot. Reduction in the overall time delay was also investigated. During these evaluations, different preferences were noted for the baseline or the new systems depending on the pilot background. The trained astronauts were quite proficient with the baseline system and found the new systems to be less desirable than the baseline. On the other hand, the pilots without extensive flight training with the orbiter had a strong preference for the new systems. This paper presents the results of the VMS and TIFS simulations. A hypothesis is presented regarding the control strategies of the two pilot groups and how this influenced their control systems preferences. Interpretations of these control strategies are made in terms of open-loop aircraft response characteristics as well as pilot-vehicle closed-loop characteristics.

Powers, B. G.↗

NASA NTRS1986

The Venus Balloon Project telemetry processing

The peculiarities of the Venus Balloon telemetry system required the development of a new methodology for the telemetry processing, since the capabilities of the Deep Space Network (DSN) telemetry system do not include burst processing of short frames with two different bit rates and first bit acquisition. A software package was produced for the non-real time detection, demodulation, and decoding of the telemetry streams obtained from an open loop recording utilizing the DSN spectrum processing subsystem-radio science (DSP-RS). A general description of the resulting software package (DMO-5539-SP) and its adaptability to the real mission's variations is contained.

Urech, J. M.↗

NASA NTRS1986

Some computational techniques for estimating human operator describing functions

Computational procedures for improving the reliability of human operator describing functions are described. Special attention is given to the estimation of standard errors associated with mean operator gain and phase shift as computed from an ensemble of experimental trials. This analysis pertains to experiments using sum-of-sines forcing functions. Both open-loop and closed-loop measurement environments are considered.

Levison, W. H.↗

NASA NTRS1986

Comparison of the STI NIPIP tracking dynamics identification with the on-line Fourier analyzer DFA results including a time varying case

The Non-Intrusive Pilot Identification Procedure (NIPIP) recently developed at STI and described at the 1981 Annual Manual was used to identify operators who were compensatory tracking a sub-critical-instability task. NIPIP uses a time domain least squares procedure converting to frequency domain coefficients. The forcing function was a sum of sinusoids supplied by the STI Mark II Describing Function Analyzer, which computes on-line Fourier coefficients of the operator's error/input describing function. The resulting open-loop and operator dynamics computed by each procedure are compared, and they are shown to be reasonably close when there is reasonable power in the error signal at the measurement frequencies. A special run was made in which the operator abruptly reduced gain within 1 sec, and the ability of the NIPIP to identify this step time variation in the operator is illustrated.

Jex, H. R.↗

NASA NTRS1985

Control of a free-flying robot manipulator system

The goal of the research is to develop and test control strategies for a self-contained, free flying space robot. Such a robot would perform operations in space similar to those currently handled by astronauts during extravehicular activity (EVA). The focus of the work is to develop and carry out a program of research with a series of physical Satellite Robot Simulator Vehicles (SRSV's), two-dimensionally freely mobile laboratory models of autonomous free-flying space robots such as might perform extravehicular functions associated with operation of a space station or repair of orbiting satellites. The development of the SRSV and of some of the controller subsystems are discribed. The two-link arm was fitted to the SRSV base, and researchers explored the open-loop characteristics of the arm and thruster actuators. Work began on building the software foundation necessary for use of the on-board computer, as well as hardware and software for a local vision system for target identification and tracking.

Alexander, H.↗

NASA NTRS1985

Identification and verification of frequency-domain models for XV-15 tilt-rotor aircraft dynamics

Frequency-domain methods are used to extract the open-loop dynamics of the XV-14 tilt-rotor aircraft from flight test data for the cruise condition (V = 170 knots). The frequency responses are numerically fitted with transfer-function forms to identify equivalent model characteristics. The associated handling quality parameters meet or exceed Level 2, Category A, requirements for fixed-wing military aircraft. Step response matching is used to verify the time-domain fidelity of the transfer-function models for the cruise and hover flight conditions. The transient responses of the model and aircraft are in close agreement in all cases, except for the normal acceleration response to elevator deflection in cruise. This discrepancy is probably due to the unmodeled rotor rpm dynamics. The utility of the frequency-domain approach for dynamics identification and analysis is clearly demonstrated.

Tischler, M. B.↗

NASA NTRS1986

Equations for the vibration of a slewing flexible spacecraft

The derivation of the equations describing the vibration of a flexible spacecraft is presented in the context of a perturbation method permitting a maneuver strategy independent of the vibration control. A straightforward open-loop minimum-time rotational maneuver strategy is developed for the spacecraft regarded as a rigid body. Actuator dynamics are considered in the formulation. A maneuver force distribution is developed which excites the least amount of elastic deformation of the flexible parts of the spacecraft. An efficient technique for simulating structural vibrations during a maneuver is presented. Numerical results demonstrate the maneuver strategy and highlight the vibration caused by rotational maneuvers.

Quinn, R. D.↗

NASA NTRS1986

Integrated aeroservoelastic tailoring of lifting surfaces

An approach to the integration of two design activities, structural design and active control design, for a highly idealized aeroservoelastic system is presented. The particular design goal for this study is the maximization of the stable airspeed envelope of an idealized model of an aeroservoelastic system through rational and systematic variation of structural and control design parameters. The steady-state linear quadratic regulator is used to model the control subsystem; the structural subsystem is assigned characteristic design parameters, such as shear center position. The application of the procedure described here produces optimally controlled structures with stability characteristics superior to those of open-loop and initial closed-loop designs.

Zeiler, T. A.↗

NASA NTRS1985

Regions of stability with unequal saturation limits and non-zero set point

Constraints on the magnitudes of control variables limit the region where open-loop unstable systems can be stabilized using feedback control. Variations in regions of stability with unequal control saturation limits and non-zero set points are illustrated for single-input unstable linear systems which have one or two unstable eigenvalues. The regions of stability for saddle-point- and unstable-node-type singularities increase with the increase in one of the saturation limits, but they become invariant when the larger control limit exceeds a certain value; the stability regions vanish for non-zero set-points that saturate the controls. The unstable-focus-type singularity exhibits strikingly different characteristics. These results suggest guidelines for obtaining desired stability regions for different types of singularities.

Stengel, R. F.↗

NASA NTRS1986

Rapid torque-limited line-of-sight pointing of SCOLE (Spacecraft Control Laboratory Experiment) configuration

The design concept of a control for rapid torque-limited slewing of a rigid-mast version of the NASA SCOLE configuration is presented and demonstrated by means of numerical simulation. The time-optimal control problem for the system is decomposed into separate single-axis problems, expanding analytically the implicit nonlinear transcendental expression for the SCOLE line-of-sight error, and the final Euler attitude angles and slew angles are determined. The simulation results are presented in tables and graphs, and it is found that bang-bang or bang-pause-bang slew maneuvers with control moment applied to the Shuttle and control force applied to the reflector, and with a 5-deg/s slew-rate limit, produce the best pointing accuracy and the shortest slew times, although the specified line-of-sight error of 0.02 deg cannot be achieved using such open-loop single-axis maneuvers.

Lin, J. G.↗

NASA NTRS1986

Simulation studies of alternate longitudinal control systems for the Space Shuttle Orbiter in the landing regime

Simulations of the Space Shuttle Orbiter in the landing task were conducted by the NASA Ames-Dryden Flight Research Facility using the Ames Research center vertical motion simulation (VMS) and the total in-flight simulator (TIFS) variable-stability aircraft. Several new control systems designed to improve the orbiter longitudinal response characteristics were investigated. These systems improved the flightpath response by increasing the amount of pitch-rate overshoot. Reduction in the overall time delay was also investigated. During these evaluations, different preferences were noted for the baseline or the new systems depending on the pilot background. The trained astronauts were quite proficient with the baseline system and found the new systems to be less desirable than the baseline. On the other hand, the pilots without extensive flight training with the Orbiter had a strong preference for the new systems. This paper presents the results of the VMS and TIFS simulations. A hypothesis is presented regarding the control strategies of the two pilot groups and how this influenced their control system preferences. Interpretations of these control strategies are made in terms of open-loop aircraft response characteristics as well as pilot-vehicle closed-loop characteristics.

Powers, B. G.↗

NASA NTRS1986

Controller design via structural reduced modeling by FETM

The Finite Element - Transfer Matrix (FETM) method has been developed to reduce the computations involved in analysis of structures. This widely accepted method, however, has certain limitations, and does not directly produce reduced models for control design. To overcome these shortcomings, a modification of FETM method has been developed. The modified FETM method easily produces reduced models that are tailored toward subsequent control design. Other features of this method are its ability to: (1) extract open loop frequencies and mode shapes with less computations, (2) overcome limitations of the original FETM method, and (3) simplify the procedures for output feedback, constrained compensation, and decentralized control. This semi annual report presents the development of the modified FETM, and through an example, illustrates its applicability to an output feedback and a decentralized control design.

Yousuff, A.↗

NASA NTRS1986

Piloted simulation study of the effects of an automated trim system on flight characteristics of a light twin-engine airplane with one engine inoperative

A simulation study was conducted to investigate the piloting problems associated with failure of an engine on a generic light twin-engine airplane. A primary piloting problem for a light twin-engine airplane after an engine failure is maintaining precise control of the airplane in the presence of large steady control forces. To address this problem, a simulated automatic trim system which drives the trim tabs as an open-loop function of propeller slipstream measurements was developed. The simulated automatic trim system was found to greatly increase the controllability in asymmetric powered flight without having to resort to complex control laws or an irreversible control system. However, the trim-tab control rates needed to produce the dramatic increase in controllability may require special design consideration for automatic trim system failures. Limited measurements obtained in full-scale flight tests confirmed the fundamental validity of the proposed control law.

Stewart, E. C.↗

NASA NTRS1986

Computational methods for optimal linear-quadratic compensators for infinite dimensional discrete-time systems

An abstract approximation theory and computational methods are developed for the determination of optimal linear-quadratic feedback control, observers and compensators for infinite dimensional discrete-time systems. Particular attention is paid to systems whose open-loop dynamics are described by semigroups of operators on Hilbert spaces. The approach taken is based on the finite dimensional approximation of the infinite dimensional operator Riccati equations which characterize the optimal feedback control and observer gains. Theoretical convergence results are presented and discussed. Numerical results for an example involving a heat equation with boundary control are presented and used to demonstrate the feasibility of the method.

Gibson, J. S.↗