Search NASA⌕ Search

SEARCH · Search NASA

Results for “plane wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Evolving Outer Heliosphere: Tracking Solar Wind Transients from 1 au to the VLISM with IBEX and Voyager 1

Abstract Interstellar Boundary Explorer (IBEX) observations of energetic neutral atom (ENA) fluxes from the heliosphere have greatly enriched our understanding of the interaction of the solar wind (SW) with the local interstellar medium (LISM). However, there has been recent controversy surrounding the inability of most ENA models to produce as high an intensity of ∼0.5–6 keV ENAs as IBEX observes at 1 au, especially as a function of time. In our previous study (E. J. Zirnstein et al.), we introduced a new model that utilizes a data-driven magnetohydrodynamic simulation of the SW–LISM interaction to propagate pickup ions through the heliosheath (HS) after they are nonadiabatically heated at the heliospheric termination shock. E. J. Zirnstein et al. only simulated and analyzed IBEX observations from the direction of Voyager 2. In this study, we expand our model to include fluxes from the direction of Voyager 1, as well as in the low-latitude part (middle) of the ribbon (10° below the ecliptic plane). We show that the model results at Voyager 1 are consistent with E. J. Zirnstein et al.’s results at Voyager 2 in terms of a secondary ENA source contribution of ≲20% from both directions. Our results in the middle of the ribbon also reproduce the data, when including a time-dependent secondary ENA source. Finally, we demonstrate with our simulation that three large pressure waves likely merged in the VLISM and were observed by Voyager 1 as “pf2,” while at least one of the wave’s effects in the HS was observed by IBEX as a brief enhancement in ENA flux in early 2016.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Dark states of electrons in a quantum system with two pairs of sublattices

A quantum state of matter that is forbidden to interact with photons and is therefore undetectable by spectroscopic means is called a dark state. This basic concept can be applied to condensed matter where it suggests that a whole band of quantum states could be undetectable across a full Brillouin zone. Here we report the discovery of such condensed-matter dark states in palladium diselenide as a model system that has two pairs of sublattices in the primitive cell. By using angle-resolved photoemission spectroscopy, we find valence bands that are practically unobservable over the whole Brillouin zone at any photon energy, polarization and scattering plane. Our model shows that two pairs of sublattices located at half-translation positions and related by multiple glide-mirror symmetries make their relative quantum phases polarized into only four kinds, three of which become dark due to double destructive interference. This mechanism is generic to other systems with two pairs of sublattices, and we show how the phenomena observed in cuprates, lead halide perovskites and density wave systems can be resolved by the mechanism of dark states. Our results suggest that the sublattice degree of freedom, which has been overlooked so far, should be considered in the study of correlated phenomena and optoelectronic characteristics.

electronic properties and materials↗
DOE OSTI2026

Ray-tracing image simulations of transparent objects with complex shape and inhomogeneous refractive index

Optical images of transparent three-dimensional objects can be different from a replica of the object’s cross section in the image plane, due to refraction at the surface or in the body of the object. Simulations of the object’s image are thus needed for the visualization and validation of physical models. We report ray tracing image simulations that achieved high physical fidelity, reproducing optical behaviors and image features not rendered in previous studies. We replicated brightfield microscopy images of drops with complex shapes, and images of pressure and shock waves traveling inside them. For high physical fidelity, the simulations must replicate the spatial and angular distribution of illumination rays, and both the experiment and the simulation must be designed for accurate optical modeling. The simulations are highly sensitive to the properties of the drops and can be used to diagnose and refine fluid dynamics models. The simulated images can also be optimized to extract multiple 3D properties from experimental images. Compared to specialized single-shot 3D imaging methods, this approach has the advantage that it preserves the experimental simplicity, the high resolution, and the visual interpretability characteristic to basic optical imaging. The techniques introduced here are directly applicable to optical microscopy, so they can be used in other fields, such as microfluidics and biology, to expand the type and the accuracy of three-dimensional information that can be extracted from basic optical images.

Cavitation↗
DOE OSTI2024

III-nitride m-plane violet narrow ridge edge-emitting laser diodes with sidewall passivation using atomic layer deposition

A novel deep-ridge laser structure with atomic-layer deposition (ALD) sidewall passivation was proposed that enhances the optical characteristics of 8-µm ridge width III-nitride violet lasers on freestanding m -plane GaN substrates. The internal loss was determined using the variable stripe length method, where the laser structure with ALD sidewall passivation showed lower internal loss compared to the conventional shallow-ridge laser design. ALD sidewall passivation plays a critical role in device improvements; compared to the lasers without ALD sidewall passivation, the lasers with ALD sidewall passivation yield improved optoelectrical performance and longer lifetime under continuous-wave operation at high current density. This work demonstrates the importance of ALD sidewall passivation to laser performance, which enables high energy efficiency.

Wong, Matthew S.↗
DOE OSTI2025

New proton emitter 188 At implies an interaction unprecedented in heavy nuclei

We report the discovery of a new atomic nucleus 188 At, which is the heaviest proton-emitting isotope known to date. The new activity was observed through the 107 Ag( 84 Sr, 3n) 188 At fusion-evaporation reaction using the focal-plane spectrometer of the gas-filled recoil separator in the Accelerator Laboratory of the University of Jyväskylä, Finland. To fully interpret the experimental data, we have expanded the non-adiabatic quasiparticle model to treat nuclei in the beyond-lead region. The description reproduced the measured decay rate and pointed towards emission from an extremely prolate-deformed state with a dominant s 1/2 proton component in the wave function. The Thomas-Ehrman shift can be enhanced in low angular momentum states, but such effects have not been observed in heavy nuclei. The single-proton separation energy of 188 At deviates from that extrapolated from the systematics, which can be interpreted as the first evidence of this effect in heavy nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Global Hybrid Simulations of Interaction Between Interplanetary Rotational Discontinuity and Bow Shock/Magnetosphere: Can Ion-Scale Magnetic Reconnection be Driven by Rotational Discontinuity Downstream of Quasi-Parallel Shock?

Ion-scale magnetic reconnection has been observed downstream of the terrestrial quasi-parallel (Q-∥) shock. Whether it is driven by interplanetary discontinuities or turbulent Q-∥ shock, however, is unclear. Using three-dimensional global hybrid simulation, we investigate the generation of magnetic reconnection downstream of the Q-∥ shock, while an interplanetary rotational discontinuity (RD) is launched to the bow shock. Cases with various solar wind Alfvén Mach numbers, M A = 3.0 to 8, and propagation directions of the RD are presented. The propagation direction n is assumed to be in the GSE xz plane and pointing earthward, with n = (-sin(θ 12 /2),0,-cos(θ 12 /2)), where θ 12 is the angle between the upstream (B1) and downstream (B2) magnetic fields across the transmitted RD. It is found that magnetic reconnection occurs inside the RD downstream of the Q-∥ shock, forming flux ropes extending along the dawn-dusk direction about tens of ion inertial lengths. Large-amplitude low-frequency waves originated from the Q-∥ shock lead to the bending and squeezing of the field lines around the RD, which play an important role in triggering reconnection inside the RD. As the RD impacts the dayside magnetopause, magnetopause reconnection takes place between the field lines behind the RD and geomagnetic field lines. Nevertheless, no reconnection is found downstream of the Q-∥ shock itself or outside the RD in the magnetosheath. The existent and structure of reconnection in the magnetosheath are found to strongly depend on the parameters M A and n. Our simulation shows that ion-scale magnetic reconnection is driven by an external driver in the form of the compression of an RD around the bow shock and in the magnetosheath, rather than caused by the turbulent Q-∥ shock alone.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Re-entrance to a ferromagnetic insulator with oxygen-vacancy ordering in the La 0.7 Sr 0.3 MnO 3 /SrTiO 3 superlattice

The charge-density wave is correlated with the properties in transition metal oxides, and regulating this state is important to explore the potential of oxides. Defects could modulate the local environment, in which the effect is subject to the concentration and arrangement, and an artificial arrangement of defect-ordering is highly expected to design the material properties. In this work, the ordering of oxygen vacancies with a preferred location on the (001) La/SrO plane by self-structural optimization was induced in La 0.7 Sr 0.3 MnO 3 /SrTiO 3 superlattices with medium oxygen pressure during SrTiO 3 deposition, and then the ferromagnetic charge-ordering (CO)/charge-density-wave (CDW) state was formed in La 0.7 Sr 0.3 MnO 3 with susceptibility to magnetic field, temperature, and superlattice configuration. In addition, re-entrance to the ferromagnetic insulator CO/CDW could be induced by a high magnetic field. The selective occupancy of oxygen vacancies on the (001) La/SrO plane and the phase fluctuation around the CO/CDW-to-ferromagnetic metal phase transition were critical to the above properties. The interfacial diffusion with atomic-level resolution to control oxygen vacancies could be used in other magnetoelectric systems and corresponding device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Nanoscale Imaging of Magnetotransport around a Circular 𝑝−𝑛 Junction in Graphene

Magnetoresistance studies of 2D systems are often shaped by the motion of electrons that occupy spatially confined wave functions, such as topological edge modes and disorder-induced bound states. Directly probing how such states form and behave in situ , under applied currents, provides a clear way of connecting microscopic physics to the macroscopic transport response. Here, in this Letter, scanning tunneling potentiometry is used to probe the local, current-induced electrochemical potential of carriers in graphene near circular 𝑝−𝑛 junctions in an out-of-plane magnetic field ranging from 0 to 1.4 T. These measurements provide detailed information about the motion of carriers at the nanometer scale, revealing how it evolves with increasing field. The electrochemical potential displays distinct patterns, such as dipoles, spirals, and concentric disks in weak, moderate, and high fields, respectively. The size and orientation of these patterns can be used to understand how local carrier dynamics change in different transport regimes as well as to directly extract physical parameters such as the electron mean free path and cyclotron diameter.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterization of photoinduced normal state through charge density wave in superconducting YBa 2 Cu 3 O 6.67

The normal state of high-T c cuprates has been considered one of the essential topics in high-temperature superconductivity research. However, compared to the high magnetic field study of it, understanding a photoinduced normal state remains elusive. Here, we explore a photoinduced normal state of YBa 2 Cu 3 O 6.67 through a charge density wave (CDW) with time-resolved resonant soft x-ray scattering, as well as a high magnetic field x-ray scattering. In the nonequilibrium state where people predict a quenched superconducting state based on the previous optical spectroscopies, we experimentally observed a similar analogy to the competition between superconductivity and CDW shown in the equilibrium state. We further observe that the broken pairing states in the superconducting CuO 2 plane via the optical pump lead to nucleation of three-dimensional CDW precursor correlation. Ultimately, these findings provide a critical clue that the characteristics of the photoinduced normal state show a solid resemblance to those under magnetic fields in equilibrium conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Orbit response measurements with oscillating trajectories

Optical properties of components in a linac can be reconstructed from analysis of the orbit response matrix, composed from responses of BPMs to changes in currents of dipole correctors. An efficient way to record such response, discussed in this note, is to excite the corrector current with a sine wave and record its Fourier component of the BPM spectrum. Because of a narrow band of the excitation signal, response to multiple correctors can be recorded at the same time without significantly affecting the signal-to-noise ratio. For that, the correctors are oscillated at different frequencies, and the corresponding BPM Fourier components are recorded. In an ion (non-relativistic) linac, similar measurements can be performed for the longitudinal plane as well. Examples of measurements at the PIP2IT test linac are shown.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

3D seismic imaging of a fracture damage zone controlling reservoir compartmentalization at the Raft River EGS using multi-azimuth walkaway VSP

Accurate imaging of steeply dipping fracture zones in crystalline enhanced geothermal systems (EGS) is critical for constraining permeability architecture and guiding stimulation design. However, such structures remain poorly resolved by conventional surface seismic methods. We present a fully three-dimensional (3D) elastic-waveform inversion-migration workflow applied to multi-azimuth walkaway vertical seismic profiling (VSP) data acquired in a deviated borehole at the Raft River EGS. The workflow integrates first-arrival traveltime tomography, multi-scale elastic waveform inversion (EWI), and elastic least-squares reverse-time migration (ELSRTM) to recover high-resolution compressional-and shear-wave velocity models and to image structural discontinuities in the crystalline basement. The results reveal a laterally continuous low-velocity anomaly, with shear-wave velocity reductions of 25-30%, consistent with fractureinduced mechanical weakening. Two steeply dipping discontinuities bound a 50-80 m wide fracture damage zone. Independent constraints from microseismic clustering and geochemical compartmentalization corroborate the geometry and structural significance of this feature. Synthetic modeling further confirms that structures of this scale are resolvable (~30 m). These findings indicate that the Narrows structure is a distributed fracture damage zone rather than a discrete fault plane. By resolving fracture-zone geometry at the tens-of-meters scale using a single borehole, this workflow provides a practical and transferable approach for improving structural characterization, reducing uncertainty in permeability architecture, and supporting reservoir modeling and stimulation design in fractured crystalline EGS reservoirs.

58 GEOSCIENCES↗
DOE OSTI2021

Decay and renormalization of a longitudinal mode in a quasi-two-dimensional antiferromagnet

Abstract An ongoing challenge in the study of quantum materials, is to reveal and explain collective quantum effects in spin systems where interactions between different modes types are important. Here we approach this problem through a combined experimental and theoretical study of interacting transverse and longitudinal modes in an easy-plane quantum magnet near a continuous quantum phase transition. Our inelastic neutron scattering measurements of Ba 2 FeSi 2 O 7 reveal the emergence, decay, and renormalization of a longitudinal mode throughout the Brillouin zone. The decay of the longitudinal mode is particularly pronounced at the zone center. To account for the many-body effects of the interacting low-energy modes in anisotropic magnets, we generalize the standard spin-wave theory. The measured mode decay and renormalization is reproduced by including all one-loop corrections. The theoretical framework developed here is broadly applicable to quantum magnets with more than one type of low energy mode.

36 MATERIALS SCIENCE↗
DOE OSTI2025

X-ray diffraction strains in laser-ablated aluminum, nickel, sodium, and invar: Pressures to 475 GPa

Dynamically compressed materials in longitudinal waves are described by two physical models: hydrostatic pressure, with equal, normal, principal stresses or material uniaxially strained in the wave propagation direction. These models are disparate, so experimental comparisons and evaluations are important. Polycrystalline material in a state of hydrostatic pressure will have no eccentricity of x-ray-diffracted Debye–Scherrer rings. A general three-dimensional solution of Bragg diffracted x rays based on principal crystallographic strains in the compression wave was found. The distortion of x-ray diffraction beams has been used for strain measurements; the analysis developed incorporates a strained reciprocal lattice and the incident x-ray beam. Strain-distorted Polanyi surfaces form an annulus of compression with an ellipsoid of revolution in reciprocal space, which is intersected by Ewald's sphere for Bragg diffraction. The in situ measurements for strain describe nanosecond diffraction evaluated using two planes, (hkl) and (h′k′l′), both in the same crystallographic phase. Diffraction from Al, Ni, Na, and Invar quantifies the compression axial strains in these materials: The compression axial ratios are 0.65, 1.05, 0.88, and 1.58 at pressures of 291, 402, 409, and 367 GPa for the respective materials. Crystal structure transformations with homogeneous pressurized stresses, mandating equal normal strains, should not be anticipated to agree with heterogeneous, uniaxially strained, and sheared crystalline phases. Measurements support in-plane strains increasing with pressure, p , in fcc and hcp aluminum as ε 22 = −0.21 p /TPa.

Alloys↗
DOE OSTI2026

Predicted third-order sweet spots for phi-junction Josephson parametric amplifiers

Hybrid superconductor-semiconductor nanowire Josephson junctions exhibit skewed and phi-shifted current phase relations when an in-plane magnetic field is applied along the weak link's spin-orbit effective field direction. These junctions can have an asymmetric Josephson potential with odd-order nonlinearities. A dominant third-order nonlinearity can be achieved by tuning the magnetic field to a sweet spot. Sweet spots persist when higher order Josephson harmonics are included. This makes it possible to have a single Josephson junction dipole element with three-wave mixing capability, which is favorable for pump-efficient amplification. Electrostatic gate tunability of the semiconductor weak link can make it operable within an extended range of working frequencies, and the inclusion of micromagnets can facilitate near-zero magnetic field operation.

Reza, Tasnum [Univ. of Pittsburgh, PA (United Stat↗
DOE OSTI2020

Dynamical quantum phase transitions in interacting atomic interferometers

Particle-wave duality has allowed physicists to establish atomic interferometers as celebrated complements to their optical counterparts in a broad range of quantum devices. In particular, interactions give rise to multiparticle correlations unavailable in linear interferometers. Here, we show that interactions lead to dynamical quantum phase transitions (DQPTs) between NOON states in an atomic interferometer. These transition points result from zeros of the Loschmidt echo, which approach the real axis of the complex time plane in the large-particle-number limit, and signify pair condensates, another type of exotic quantum states featured with prevailing two-body correlations. Such DQPTs thus provide us with a new angle to understand many-body states emergent from quantum nonequilibrium dynamics. Further, our work also suggests interacting atomic interferometers as a new tool for creating highly entangled states to beat the standard quantum limit.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Cryogenic Performance of the SPT-SLIM Receiver

The South Pole Telescope Shirokoff Line Intensity Mapper (SPT-SLIM) is a millimeter-wave line-intensity mapping experiment, deployed on the South Pole Telescope (SPT) during the 2024-2025 Austral Summer season. This pathfinder experiment serves to demonstrate the on-sky operation of multi-pixel on-chip spectrometer technology. We present on the cryogenic performance of the SPT-SLIM receiver for this Year 1 observing campaign. The SPT-SLIM receiver utilizes an Adiabatic Demagnetization Referigerator (ADR) for cooling the focal plane of superconducting filterbank spectrometers to a temperature of 150mK. We demonstrate stable thermal performance of the focal plane module during observing operations in line with thermal modelling, enabling a cryogenic operation efficiency above 80%. We also report on the receiver control system design utilizing the Observatory Control System (OCS) platform for automated cryogenic operation on the SPT.

Young, Matthew [Fermilab]↗
DOE OSTI2020

Optical Design and Characterization of 40-GHz Detector and Module for the BICEP Array

Families of cosmic inflation models predict a primordial gravitational-wave background that imprints B-mode polarization pattern in the cosmic microwave background (CMB). High-sensitivity instruments with wide frequency coverage and well-controlled systematic errors are needed to constrain the faint B-mode amplitude. We have developed antenna-coupled transition edge sensor arrays for high-sensitivity polarized CMB observations over a wide range of millimeter-wave bands. BICEP array, the latest phase of the BICEP/Keck experiment series, is a multi-receiver experiment designed to search for inflationary B-mode polarization to a precision σ(r) between 0.002 and 0.004 after 3 full years of observations, depending on foreground complexity and the degree of lensing removal. We describe the electromagnetic design and measured performance of BICEP array’s low-frequency 40-GHz detector, their packaging in focal plane modules, and optical characterization including efficiency and beam matching between polarization pairs. We summarize the design and simulated optical performance, including an approach to improve the optical efficiency due to mismatch losses. Here, we report the measured beam maps for a new broadband corrugation design to minimize beam differential ellipticity between polarization pairs caused by interactions with the module housing frame, which helps minimize polarized beam mismatch that converts CMB temperature to polarization (T→P) anisotropy in CMB maps.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Effect of Laser Beam Profile on Rotating Lattice Single Crystal Growth in Sb2S3 Model Glass

Laser heating of chalcogenide glasses has successfully produced rotating lattice single crystals through a solid-solid transformation. To better understand the nature of complex, orientation-dependent lattice rotation, we designed heat profiles of the continuous wave laser by beam shaping, fabricated larger Sb2S3 crystal dots in Sb2S3 glass, and investigated the lattice rotation where the crystal could grow in all radial directions under a circular thermal gradient. The results show that the rate of lattice rotation is highly anisotropic and depends on crystallographic direction. The nature of this rotation is the same in crystals of different orientation relative to the surface. The growth directions that align with the slip planes show the highest rate of rotation and the rotation rate gradually decreases away from this direction. Additionally, the presence of multiple growth directions results in a complicated rotation system. We suggest that the growth front influences the density of dislocations introduced during growth under confinement and thus affects the lattice rotation rate in these crystals.

36 MATERIALS SCIENCE↗