Search NASA⌕ Search

SEARCH · Search NASA

Results for “routing problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Models of Sector Flows Under Local, Regional and Airport Weather Constraints

Recently, the ATM community has made important progress in collaborative trajectory management through the introduction of a new FAA traffic management initiative called a Collaborative Trajectory Options Program (CTOP). FAA can use CTOPs to manage air traffic under multiple constraints (manifested as flow constrained areas or FCAs) in the system, and it allows flight operators to indicate their preferences for routing and delay options. CTOPs also permits better management of the overall trajectory of flights by considering both routing and departure delay options simultaneously. However, adoption of CTOPs in airspace has been hampered by many factors that include challenges in how to identify constrained areas and how to set rates for the FCAs. Decision support tools providing assistance would be particularly helpful in effective use of CTOPs. Such DSTs tools would need models of demand and capacity in the presence of multiple constraints. This study examines different approaches to using historical data to create and validate models of maximum flows in sectors and other airspace regions in the presence of multiple constraints. A challenge in creating an empirical model of flows under multiple constraints is a lack of sufficient historical data that captures diverse situations involving combinations of multiple constraints especially those with severe weather. The approach taken here to deal with this is two-fold. First, we create a generalized sector model encompassing multiple sectors rather than individual sectors in order to increase the amount of data used for creating the model by an order of magnitude. Secondly, we decompose the problem so that the amount of data needed is reduced. This involves creating a baseline demand model plus a separate weather constrained flow reduction model and then composing these into a single integrated model. A nominal demand model is a flow model (gdem) in the presence of clear local weather. This defines the flow as a function of weather constraints in neighboring regions, airport constraints and weather in locations that can cause re-routes to the location of interest. A weather constrained flow reduction model (fwx-red) is a model of reduction in baseline counts as a function of local weather. Because the number of independent variables associated with each of the two decomposed models is smaller than that with a single model, need for amount of data is reduced. Finally, a composite model that combines these two can be represented as fwx-red (gdem(e), l) where e represents non-local constraints and l represents local weather. The approaches studied to developing these models are divided into three categories: (1) Point estimation models (2) Empirical models (3) Theoretical models. Errors in predictions of these different types of models have been estimated. In situations when there is abundant data, point estimation models tend to be very accurate. In contrast, empirical models do better than theoretical models when there is some data available. The biggest benefit of theoretical models is their general applicability in wider range situations once the degree of accuracy of these has been established.

Kulkarni, Deepak↗

Models of Sector Aircraft Counts in the Presence of Local, Regional and Airport Constraints

Recently, the ATM community has made important progress in collaborative trajectory management through the introduction of a new FAA traffic management initiative called a Collaborative Trajectory Options Program (CTOP). FAA can use CTOPs to manage air traffic under multiple constraints (manifested as flow constrained areas or FCAs) in the system, and it allows flight operators to indicate their preferences for routing and delay options. CTOPs also permits better management of the overall trajectory of flights by considering both routing and departure delay options simultaneously. However, adoption of CTOPs in airspace has been hampered by many factors that include challenges in how to identify constrained areas and how to set rates for the FCAs. Decision support tools providing assistance would be particularly helpful in effective use of CTOPs. Such DSTs tools would need models of demand and capacity in the presence of multiple constraints. This study examines different approaches to using historical data to create and validate models of maximum flows in sectors and other airspace regions in the presence of multiple constraints. A challenge in creating an empirical model of flows under multiple constraints is a lack of sufficient historical data that captures diverse situations involving combinations of multiple constraints especially those with severe weather. The approach taken here to deal with this is two-fold. First, we create a generalized sector model encompassing multiple sectors rather than individual sectors in order to increase the amount of data used for creating the model by an order of magnitude. Secondly, we decompose the problem so that the amount of data needed is reduced. This involves creating a baseline demand model plus a separate weather constrained flow reduction model and then composing these into a single integrated model. A nominal demand model is a flow model (gdem) in the presence of clear local weather. This defines the flow as a function of weather constraints in neighboring regions, airport constraints and weather in locations that can cause re-routes to the location of interest. A weather constrained flow reduction model (fwx-red) is a model of reduction in baseline counts as a function of local weather. Because the number of independent variables associated with each of the two decomposed models is smaller than that with a single model, need for amount of data is reduced. Finally, a composite model that combines these two can be represented as fwx-red (gdem(e), l) where e represents non-local constraints and l represents local weather. The approaches studied to developing these models are divided into three categories: (1) Point estimation models (2) Empirical models (3) Theoretical models. Errors in predictions of these different types of models have been estimated. In situations when there is abundant data, point estimation models tend to be very accurate. In contrast, empirical models do better than theoretical models when there is some data available. The biggest benefit of theoretical models is their general applicability in wider range situations once the degree of accuracy of these has been established.

Kulkarni, Deepak↗

Non-conformal interface-cohesive modeling with the shifted boundary method

The accurate simulation of boundary- and interface-dominated problems on complex geometries remains challenging when boundary- or interface-fitted meshes are difficult to generate, particularly for curved boundaries, polycrystalline microstructures, and dense interface networks. The Shifted Boundary Method (SBM) alleviates this meshing burden by shifting the enforcement of boundary conditions from the true boundary to a nearby surrogate boundary and recovering the effect of the true boundary through geometric correction terms, thereby enabling standard finite element spaces on non-boundary-fitted meshes. In this report, we develop a general shiftedboundary and shifted-interface framework within the open-source MOOSE framework. We first present a general SBM implementation for complex geometries on non-boundary-fitted meshes. We then adopt the Shifted Interface Method (SIM) for internal interfaces and develop a unified shifted-interface treatment in which the interface law is enforced on a surrogate interface and the effect of the true interface is recovered through shifted jumps, fluxes, and tractions. This perspective brings scalar thermal-contact and vector-valued cohesive-zone mechanics into a single framework, the latter realized as the Shifted Cohesive Zone Method (SCZM) and coupled with history-dependent constitutive models from NEML2. We further extend the MOOSE mesh infrastructure to support cohesive-zone calculations on distributed meshes. The framework is verified and demonstrated through three progressive studies: Poisson’s equation on a smoothed starshaped domain, a manufactured thermal-contact problem on a non-interface-fitted mesh, and a two-dimensional polycrystalline representative volume element combining crystal plasticity with cohesive grain-boundary interfaces. Across these studies, the shifted formulations reproduce boundary- and interface-fitted reference solutions with high fidelity, indicating that the proposed framework provides an accurate and efficient route to boundary- and interface-dominated simulations on arbitrary geometries without requiring fitted meshes.

Yang, Cheng-Hau↗

Intelligent Pilot Aids for Flight Re-Planning in Emergencies

Effective and safe control of an aircraft may be difficult or nearly impossible for a pilot following an unexpected system failure. Without prior training, the pilot must ascertain on the fly those changes in both manual control technique and procedures that will lead to a safe landing of the aircraft. Sophisticated techniques for determining the required control techniques are now available. Likewise, a body of literature on pilot decision making provides formalisms for examining how pilots approach discrete decisions framed as the selection between options. However, other aspects of behavior, such as the task of route planning and guidance, are not as well studied. Not only is the pilot faced with possible performance changes to the aircraft dynamics, but he or she is also tasked to create a plan of actions that will effectively take the aircraft down to a safe landing. In this plan, the many actions that the pilot can perform are closely intertwined with the trajectory of the aircraft, making it difficult to accurately predict the final outcome. Coupled with the vast number of potential actions to be taken, this problem may seem intractable. This is reflected in the lack of a pre-specified procedure capable of giving pilots the ability to find a resolution for this task. This report summarizes a multi-year effort to examine methods to aid pilots in planning an approach and arrival to an airport following an aircraft systems failure. Ultimately, we hypothesize that automatic assistance to pilots can be provided in real-time in the form of improving pilot control of a damaged aircraft and providing pilots with procedural directives suitable for critical flight conditions; such systems may also benefit pilot training and procedure design. To achieve this result, a systematic, comprehensive research program was followed, building on prior research. This approach included a pencil-and-paper study with airline pilots examining methods of representing a flight route in an immediately understandable manner, and in a manner that would allow the pilot to modify an automatically-generated route and/or detect any inappropriate elements in an automatically-generated route. Likewise, a flight simulator study examined different cockpit systems for the relative merits of providing pilots with any of a variety of automated functions for emergency flight planning. The results provide specific guidance for the design of such systems.

Pritchett, Amy R.↗

Second harmonic generation spectroscopy in the Reststrahl band of SiC using an infrared free-electron laser

The Reststrahl spectral region of silicon carbide has recently attracted much attention owing to its potential for mid-infrared nanophotonic applications based on surface phonon polaritons (SPhPs). Studies of optical phonon resonances responsible for surface polariton formation, however, have so far been limited to linear optics. In this Letter, we report the first nonlinear optical investigation of the Reststrahl region of SiC, employing an infrared free-electron laser to perform second harmonic generation (SHG) spectroscopy. We observe two distinct resonance features in the SHG spectra, one attributed to resonant enhancement of the nonlinear susceptibility χ{sup (2)} and the other due to a resonance in the Fresnel transmission. Our work clearly demonstrates high sensitivity of mid-infrared SHG to phonon-driven phenomena and opens a route to studying nonlinear effects in nanophotonic structures based on SPhPs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE ROLE OF KOZAI CYCLES IN NEAR-EARTH BINARY ASTEROIDS

We investigate the Kozai mechanism in the context of near-Earth binaries and the Sun. The Kozai effect can lead to changes in eccentricity and inclination of the binary orbit, but it can be weakened or completely suppressed by other sources of pericenter precession, such as the oblateness of the primary body. Through numerical integrations including primary oblateness and three bodies (the two binary components and the Sun), we show that Kozai cycles cannot occur for the closely separated near-Earth binaries in our sample. We demonstrate that this is due to pericenter precession around the oblate primary, even for very small oblateness values. Since the majority of observed near-Earth binaries are not well separated, we predict that Kozai cycles do not play an important role in the orbital evolution of most near-Earth binaries. For a hypothetical wide binary modeled after 1998 ST27, the separation is large at 16 primary radii and so the orbital effects of primary oblateness are lessened. For this wide binary, we illustrate the possible excursions in eccentricity and inclination due to Kozai cycles as well as depict stable orientations for the binary's orbital plane. Unstable orientations lead to collisions between binary components, and we suggest that the Kozai effect acting in wide binaries may be a route to the formation of near-Earth contact binaries.

79 ASTRONOMY AND ASTROPHYSICS↗

The WorkPlace distributed processing environment

Real time control problems require robust, high performance solutions. Distributed computing can offer high performance through parallelism and robustness through redundancy. Unfortunately, implementing distributed systems with these characteristics places a significant burden on the applications programmers. Goddard Code 522 has developed WorkPlace to alleviate this burden. WorkPlace is a small, portable, embeddable network interface which automates message routing, failure detection, and re-configuration in response to failures in distributed systems. This paper describes the design and use of WorkPlace, and its application in the construction of a distributed blackboard system.

Ames, Troy↗

Polymer Macrocycles: A novel topology to control dynamics of rubbery materials (Final Report)

One of the current challenges in polymer physics and engineering is to understand the behavior of circular macromolecules. Though such molecules have been made by dilute solution ring closure methods in the past, such procedures have been limited to relatively small, unentangled rings as well as to small sample quantities. Initial studies were also hampered by issues surrounding purity of the rings, though this problem has been somewhat overcome by the use of liquid chromatography at critical conditions (LCCC) methods that separate rings and linear chains. Furthermore, in spite of the continued progress a full understanding of ring dynamics remains elusive. The present work has addressed multiple aspects of the behavior of ring molecules by using a novel synthetic route: reversible radical recombination redox polymerization (R3P) to produce poly(3,6-dioxa-1,8-octanedithiol) (PolyDODT) molecules. The synthesis conditions were chosen to produce linear (LDODT), cyclic (RDODT) and linear-cyclic mixtures (LRDODT) in order to investigate dilute solution and rheological responses of the materials. Importantly, the R3P synthesis makes larger quantities and higher molecular weights than do the dilute solution ring closure methods and also has the potential to be scaled to industrial quantities, thus becoming commercializable. We emphasize two important outcomes of the work. The first is that the rheological investigation shows that very large molecular weight the PolyDODT rings permitted the investigation of ring dynamics from glassy towards terminal flow for molecular sizes corresponding to approximately 300 entanglements of the linear counterpart. At the same time, these very large sized rings could be diluted in a solvent in order to reduce the molecular entanglement density to less than unity. The results demonstrate that ring viscosity follows a Rouse-like linear dependence on molecular weight or entanglement number to approximately 15 entanglements. This range of "Rouse-like" response is greater than what was achieved in all prior works where synthesis conditions have limited the molecular sizes achievable. After the entanglement number $Z_w$ increases beyond approximately 15, we find that the viscosity-molecular weight scaling undergoes a rapid change from the Rouse-like $η\sim{Z}^1_w$ to a very strong power-law scaling that is approximately $η\sim{Z}^{5.8}_w$. This aspect of the work strongly suggests that prior investigations on highly pure rings have invariably been performed on unentangled systems simply because ring molecules have very high entanglement thresholds. The results are further supported by plateau modulus measurements that show that in the "Rouse-like" viscosity regime, for the RDODT samples there is a corresponding lack of a rubbery entanglement plateau and once entanglement coupling is seen, the rubbery plateau also appears in the dynamic modulus data. Furthermore, upon appropriate scaling, we show that the unentangled polyDODT rings (i.e., the diluted high molecular weight rings) show virtually identical dynamics (upon appropriate scaling to account for the chain dilutions) to the dynamics of similarly unentangled LCCC fractionated polystyrene rings.

36 MATERIALS SCIENCE↗

Design study of RL10 derivatives. Volume 3, part 2: Operational and flight support plan

Transportation requirements are considered during the engine design layout reviews and maintenance engineering analyses. Where designs cannot be influenced to avoid transportation problems, the transportation representative is advised of the problems permitting remedies early in the program. The transportation representative will monitor and be involved in the shipment of development engine and GSE hardware between FRDC and vehicle manufacturing plant and thereby will be provided an early evaluation of the transportation plans, methods and procedures to be used in the space tug support program. Unanticipated problems discovered in the shipment of development hardware will be known early enough to permit changes in packaging designs and transportation plans before the start of production hardware and engine shipments. All conventional transport media can be used for the movement of space tug engines. However, truck transport is recommended for ready availability, variety of routes, short transit time, and low cost.

Shubert, W. C.↗

Intelligent UAS Sense-and-Avoid Utilizing Global Constraints

Sense-and-avoid (SAA) is a critical research topic for enabling the operation of Unmanned Aircraft Systems (UAS) in civilian airspace. SAA involves two planning related problems: 1) plan-recognition to predict the future trajectory of nearby aircraft, and 2) path planning to avoid conflicts with nearby aircraft that pose a threat. We have designed and built components of a novel intelligent sense-and-avoid (iSAA) reasoning framework that takes into account information about aircraft type, transponder code, communications, local routes, airports, airspace, terrain, and weather to more accurately predict near- and medium-term trajectories of nearby aircraft. By using this additional information both the on-board control software and the ground-based UAS operator can make more informed, intelligent decisions to effectively predict and avoid conflicts and maintain separation. While this capability benefits all categories of UASs operating under both Instrument Flight Rules (IFR) and Visual Flight Rules (VFR), it is absolutely essential for allowing smaller UASs to operate VFR at low altitude in uncontrolled airspace for operations such as survey work, wildlife tracking, aerial photography, utilities inspection, crop dusting, and package delivery.

unmanned aircraft systems↗

Exploring the Nature of f-Element Soft Donor Interactions Using Electronically Tunable Azolate Ionic Liquids

This project was undertaken to advance the understanding of how f-elements interact with moderately soft donors, a heavily investigated yet open question which is of prime importance in spent nuclear fuel processing and fundamental inorganic chemistry. During the course of the project, based on exciting results, a stretch goal was developed to study the hydrolysis products of transuranic actinide metals, a somewhat understudied field even with its significance in nuclear fuel cycle and impacts in environmental chemistry. The stretch goal was to take our serendipitous discovery of an easy route to isolation of crystalline multinuclear ƒ-element hydrolysis products, and apply it to gaining a mechanistic understanding of Pu(III/IV) colloid formation. The simplicity of our techniques should lend themselves to the remote handling required for study of many transuranic elements. We developed several methodologies using azolium azolate chemistry to overcome ƒ-element hydrolysis problems that prohibit the isolation of ƒ-element soft donor complexes and to build a crystallographic library of ƒ-element N-donor complexes as a means to understand the fundamental differences between actinide and lanthanide interactions with moderately soft donor ligands. Our next major endeavor will be to transfer this chemistry from 4ƒ elements to transuranic elements, particularly in the study of hydrolysis of Pu(III/IV). While our work is fundamental in nature, applications of the knowledge we are generating should be felt in such diverse fields as catalysis, separations in general, nuclear waste remediation specifically, and many other applications in f-element magnetic and luminescent properties. The potential ramifications of the consistent and robust formation of hydrolysis controlled hexanuclear lanthanide structures are enormous, with future uses being catalyst formation, higher-nuclearity structure synthesis using our hexanuclear motif as a fundamental building block, Pu waste remediation, separations, and many other potential applications resulting from characteristic magnetic and luminescent properties of lanthanide polynuclear structures. Three synthetic methodologies (direct mixing with variable stoichiometries, use of volatile solvent, metathesis) were developed starting with 7 acidic and 6 basic azoles to obtain ionic liquids suitable for f-element coordination. Proton transfer by acidic/basic azole combination led to suitable low melting salts and two cocrystals. Acid/base reaction of azoles with soft-donor permanent cations of ([X 4444 ][OH] (where [X 4444 ] + = tetrabutylammonium [N 4444 ] + or tetrabutylphosphonium [P 4444 ] + ) with weakly acidic azoles including imidazole, 1,2,3-triazole, 1,2,4-triazole, 5-aminotetrazole, 4,5-dicyanoimidazole, and 2-amino-4,5-dicyanoimidazole) revealed several suitable low-melting salts. Metathesis reactions of Na(azolate) were conducted by first using weakly acidic azoles including 4,5-dicyanoimidazole, 2-amino-4,5-dicyanoimidazole, 5-aminotetrazole, and 1,2,4-triazole to form sodium or lithium salts using group(I) hydroxides in methanolic solutions. The best results were obtained by reacting the basic and acidic azoles directly in 1:1 or 3:1 ratios at elevated temperatures. Twenty-two azole mixtures were identified which are either low melting solids or room temperature liquids. Each of the low melting solids was confirmed to be a new solid phase, each of which is being further characterized. The liquids and solids are anticipated to be ILs, eutectics, or partially ionized systems, all of which will be suitable for the dissolution of f-element salts. Five new synthetic methodologies were developed to finding suitable crystallization conditions for f-element complexation with the goal of finding simple one pot reaction syntheses and crystallization strategies that could be used under the demanding conditions of transuranic chemistries. These synthetic methods yield many new crystalline phases which were studied by single crystal X-ray diffraction.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Wind-Optimal Trajectories for Multirotor eVTOL Aircraft on UAM Missions

Distributed electric propulsion powered electric vertical takeoff and landing aircraft are expected to enable urban air mobility. Low specific energy of onboard lithium-ion polymer batteries and wind conditions impose constraints on flight endurance. Therefore, from the safety and efficiency perspective, planning and flying minimum energy trajectories are important.The primary motivation for this paper is to determine if there is an operational benefit to flying wind-optimal trajectories for short flights (less than 60 miles) in the urban environment. This study employs wind-optimal trajectories for a NASA-proposed conceptual multirotor aircraft flight in the urban environment. The optimal control model presented includes a wind model for quantifying the effect of wind on the trajectory. The optimal control problem is numerically solved using the direct method. Energy consumption and flight duration flying wind-optimal trajectories between origins and destinations in a metropolitan area are compared with energy consumption and flight duration flying on the great-circle paths between the same origin and destination pairs to determine the operational benefit of wind-optimal routing for short flights.The flight duration results for different scenarios are validated using a simulation tool designed and developed by NASA for exploring advanced air traffic management concepts. In summary,this research study suggests that for short flights in an urban environment, the wind-optimal trajectories have a very slight (insignificant) operational advantage over the great-circle trajectories in terms of energy consumption and flight duration. As expected, headwinds and tailwinds along the route of flight have a significant impact on energy consumption and flight duration.

Urban Air Mobility↗

Molecular-like Ag clusters sensitized near-infrared down-conversion luminescence in oxyfluoride glasses for broadband spectral modification

Molecular-like Ag clusters sized at 1–4 nm have been stabilized in Pb/Cd-free oxyfluoride glasses, showing broadband excitation/emission characteristics and unique wavelength-dependent luminescent performance with a maximal quantum yield of 26.9%. It was experimentally demonstrated that an energy transfer route of Ag clusters → Tb{sup 3+} → Yb{sup 3+} occurs in Ag{sup +}/Tb{sup 3+}/Yb{sup 3+} tri-doped sample, wherein Ag clusters act as sensitizers for near-infrared down-conversion spectral modification. Hopefully, the proposed strategy that noble metal clusters being applied for harvesting solar radiation may potentially solve the sticky problems of the narrow excitation bandwidth and the low excitation efficiency in rare earth ions doped down-conversion materials.

36 MATERIALS SCIENCE↗

Allocating limited deicing resources in winter snow events

As the number and severity of snowfall events continue to grow, the need to direct road maintenance intelligently during these snowfall events will also grow. In several locations, local governments lack the resources to treat all roadways completely during snow events. Furthermore, some governments utilize only traffic data to determine which roads should be treated. As a result, many schools, businesses, and government offices must be unnecessarily closed, which directly impacts the social, educational, and economic well-being of citizens and institutions. In this work, we propose a mixed integer programming (MIP) formulation to allocate resources to manage snowfall on roads using meteorological, geographical, and environmental parameters. Furthermore, given that MIPs often scale poorly with problem size, we also present a constructive heuristic designed for the problem. Finally, we evaluate the impacts of an increase in budget for winter road maintenance on snow control resources.

97 MATHEMATICS AND COMPUTING↗

Air nonlinear dynamics initiated by ultra-intense lambda-cubic terahertz pulses

We report on the measurement of the instantaneous Kerr nonlinearity and the retarded alignment of air molecules CO{sub 2}, N{sub 2}, and O{sub 2} triggered by an intense, lambda-cubic terahertz pulse, a diffraction- and transform-limited single-cycle pulse. The strong-field, impulsive low-frequency excitation (3.9 THz) leads to field-free alignment dynamics of these molecules thanks to the terahertz-induced transient dipole moments in the otherwise non-polar molecules. The strong coupling to the terahertz electric transient results in the excitation of coherent large amplitude long-living rotational states at room temperature and ambient pressure. Beyond fundamental investigations of nonlinear properties in gases, our results suggest a route towards field-free molecular alignment at laser intensity well below the ionization threshold.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advancing biological processing for valorization of plastic wastes

We report the useful applications of plastics are as significant as the problems associated with their disposal. Current waste management strategies are ineffective at preventing the flow of plastics into landfills, wastewater treatment, and the environment. Despite the importance of recycling technologies, most plastics are used for consumables and are discarded after limited usage. Moreover, only certain plastics are recycled, and those that are generally yield lower value products. Discovering alternative routes for valorizing plastic wastes is essential. Emerging research involves the use of biocatalysts (i.e., enzymes and microorganisms) to produce valuable products like specialty polymers, biosurfactants, and drug precursors from these feedstocks. These bioprocesses commonly integrate physio-chemical pretreatments (to generate biologically reactive intermediates) and biological upgrading (to convert intermediates to products). Herein, publications that explore plastic deconstruction technologies and bioprocesses are reviewed with an emphasis on plastic waste valorization. Understanding how microorganisms metabolize the intermediates of plastic degradation and manage their inhibitory effects is a prerequisite for engineering bioprocesses. For these heterogeneous wastes, a paradigm shift from axenic cultivation of microorganisms to cultivation of microbial consortia may benefit conversion efficiency and stress resilience. Thus, a summary is provided for metabolic pathways and constituent enzymes required to synthesize biofuels, biomaterials, and chemicals from biologically reactive intermediates. Colossal challenges associated with the use of plastics as feedstocks for direct biological processing highlight the need for integrating physical, chemical, and biological technologies.

59 BASIC BIOLOGICAL SCIENCES↗

In situ electrochemical recomposition of decomposed redox-active species in aqueous organic flow batteries

Aqueous organic redox flow batteries (AORFBs) offer a safe and potentially inexpensive solution to the problem of storing massive amounts of electricity produced from intermittent renewables. However, molecular decomposition is the major barrier preventing AORFBs from being commercialized. Structural modifications can improve molecular stability at the expense of increased synthetic cost and molecular weight. Utilizing 2,6-dihydroxy-anthraquinone (DHAQ), without further structural modification, we demonstrate that electrochemical regeneration could be a viable route to achieve low-cost, long-lifetime AORFBs. In situ (online) NMR and EPR and complementary electrochemical analyses reveal that decomposition compounds i.e., 2,6-dihydroxy-anthrone (DHA) and its tautomer, 2,6-dihydroxy-anthranol (DHAL), can be converted back to DHAQ in two steps: first DHA(L) 2- are oxidized to the dimer (DHA) 2 4- at - 0.32 V vs. SHE by one-electron transfer; subsequently, the (DHA) 2 4- is oxidized to DHAQ 2- at +0.57 V vs. SHE by three-electron transfer. Electrochemical regeneration rejuvenates not only DHAQ 2- , but also the positive electrolyte – rebalancing the states of charge of both electrolytes without introducing extra ions. We demonstrate the repeated capacity recovery with DHAQ | potassium ferro-/ferricyanide flow battery in basic conditions, and show the approach is also effective for anthraquinone-2,7-disulfonate in acid. Electrochemical regeneration strategies may extend the useful lifetime of many water-soluble organic molecules with anthraquinone core structures in electrochemical cells.

25 ENERGY STORAGE↗