Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Effect of the Ce Content on the Magnetic Properties and Microstructure of CeCo{sub 5}-based Sintered Bulk Magnets

CeCo{sub 5}-based magnets have recently attracted much attention due to their moderate magnetic performance and low cost. Nevertheless, there have been few studies on the effects of Ce content on the magnetic properties and microstructures of CeCo{sub 5}-based magnets. In response to this, the magnetic properties of sintered bulk magnets with nominal compositions of Ce(Co{sub 0.73}Cu{sub 0.135}Fe{sub 0.135}){sub z} (z = 4.95, 5.15, 5.35, and 5.55), prepared by the conventional powder metallurgy method, were investigated here. Based on experimental findings, it was shown that Ce(Co{sub 0.73}Cu{sub 0.135}Fe{sub 0.135}){sub 5.15} sintered bulk magnets had comprehensive magnetic properties—maximum energy product of 80 kJ m{sup − 3} (10 MGOe) and intrinsic coercivity (H{sub cj}) of 452 kA m{sup − 1} (5.69 kOe)—superior to those previously reported by us. For z = 5.35 and 5.55, due to the presence of the minor Ce{sub 2}Co{sub 17} phase (which has a Curie temperature (T{sub c}) < 20 °C), magnets had low H{sub cj} values. Based on x-ray diffraction and scanning electron microscopy observations, it was suggested that the volume fraction of the 1:5 matrix phase was the main factor determining the H{sub cj} of CeCo{sub 5}-based sintered bulk magnets obtained with different Ce contents. Furthermore, the importance of the dispersion characteristics of the Ce{sub 2}O{sub 3} phase within the matrix was emphasized. Uniform dispersion of the Ce{sub 2}O{sub 3} phase can significantly improve the overall magnetic performance of CeCo{sub 5}-based magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CO{sub 2} Corrosion Behavior of Calcite-Covered API 5L X52 Carbon Steel in Aqueous Solutions

The CO{sub 2} corrosion of API 5L X52 steel in the presence and absence of calcite scale has been investigated. The scale was precipitated from a supersaturated solution at temperatures of 25 and 80 °C. The crystalline phase, cross section and surface morphologies of scale were studied by x-ray diffraction and scanning electron microscopy, respectively. It was found that the scale deposit mostly consisted of calcite. The corrosion behavior of bare and calcite-covered samples was investigated by electrochemical impedance spectroscopy and cyclic polarization techniques in aqueous CO{sub 2} solutions at 30, 50 and 70 °C. The presence of calcite scale on carbon steel surface decreased the adsorption of intermediate corrosion products as the scale uniformly covered the bare surface which resulted in reduction of general CO{sub 2} corrosion rate. The results of cyclic polarization tests revealed that the bare and calcite-covered samples were not susceptible to localized CO{sub 2} corrosion under conditions studied in this research.

36 MATERIALS SCIENCE↗

Synthesis of ZSM-23/ZSM-22 intergrowth zeolite with a novel dual-template strategy

ZSM-23/ZSM-22 intergrowth zeolite with fixed proportion of 60%ZSM-23/40%ZSM-22 has been synthesized with a novel dual-template strategy. The products were characterized by X-ray diffraction and scanning electron microscopy. Dimethylamine and diethylamine were used together as a dual-template system. The molar ratio of diethylamine to dimethylamine, which was changed with the type of aluminum source, was the key factor for the synthesis of intergrowth zeolites. A molar ratio of diethylamine to dimethylamine of 1:24 could result in an ZSM-23/ZSM-22 intergrowth zeolite if aluminum sulfate was used as aluminum source, whereas a molar ratio of diethylamine to dimethylamine of 1:12 was required to get an ZSM-23/ZSM-22 intergrowth zeolite if sodium metaaluminate was used. Furthermore, fluoride anion could be involved in the process as a crystallization promoter.

36 MATERIALS SCIENCE↗

Rare earth doped LiYbF{sub 4} phosphors with controlled morphologies: Hydrothermal synthesis and luminescent properties

Highlights: ► LiYbF{sub 4} microparticles as an excellent upconverting materials. ► High temperature and long time can favor high crystalline LiYbF{sub 4} microparticles. ► The shape of LiYbF{sub 4} microparticles can be tuned by the molar ratio of EDTA to Yb{sup 3+}. ► Bright green emission can be obtained by changing the doping concentration of Er{sup 3+}. -- Abstract: High quality monodisperse LiYbF{sub 4} microparticles with shape of octahedron had been prepared via a facile hydrothermal route. The crystalline phase, size, morphology and luminescence properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) spectra and Commission Internationale de L’Eclairage (CIE 1931) chromaticity coordinates, respectively. The influences of reaction temperature, reaction time and the molar ratio of EDTA to Yb{sup 3+} on the crystal phases and shapes of as-prepared products had been investigated in detail. The upconversion (UC) luminescence properties of LiYb{sub 1−x}F{sub 4}:xEr{sup 3+} (x =0.1, 0.2, 0.5, 1, 2, 5 and 10 mol%) particles with octahedral microstructures were studied under 976 nm excitation. The results showed that the luminescence colors of the corresponding products could be tuned to bright green by changing the doping concentration of Er{sup 3+} ion. The luminescence mechanisms for the doped Er{sup 3+} ion were thoroughly analyzed, showing great potential in applications such as biolabels, displays and other optical technologies.

36 MATERIALS SCIENCE↗

Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers by hydrothermal route: Luminescence properties

Highlights: ► Uniform Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were synthesized via a hydrothermal route and thermal decomposition. ► The length and diameter of Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were about 3–9 μm and 300 nm, respectively. ► Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers presented a broad R band at 696 nm when excited at 400 nm. ► It is shown that the 0.07 mol% of doping concentration of Cr{sup 3+} ions in α-Al{sub 2}O{sub 3}:Cr{sup 3+} is optimum. ► Critical distance between Cr{sup 3+} ions for energy transfer was determined to be 38 Å. -- Abstract: Uniform Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were synthesized by using a hydrothermal route and thermal decomposition of a precursor of Cr{sup 3+} doped ammonium aluminum hydroxide carbonate (denoted as AAHC), and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence (PL) spectra and decay curves. XRD indicated that Cr{sup 3+} doped samples calcined at 1473 K were the most of α-Al{sub 2}O{sub 3} phase. SEM showed that the length and diameter of these Cr{sup 3+} doped alumina microfibers were about 3–9 μm and 300 nm, respectively. PL spectra showed that the Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers presented a broad R band at 696 nm. It is shown that the 0.07 mol% of doping concentration of Cr{sup 3+} ions in α-Al{sub 2}O{sub 3}:Cr{sup 3+} was optimum. According to Dexter's theory, the critical distance between Cr{sup 3+} ions for energy transfer was determined to be 38 Å. It is found that the curve followed the single-exponential decay.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and magnetic properties of CuO hollow microspheres

Graphical abstract: - Highlights: • CuO hollow microspheres were synthesized through hydrothermal route. • The possible growth mechanism was proposed according to the experimental results. • CuO hollow microspheres show an anomalous ferromagnetic behavior at 5 K and 300 K. - Abstract: In the present work, CuO hollow microspheres with the diameter about 2 μm were successfully synthesized through a facile hydrothermal method. The phase purity, morphologies and structure features of the as obtained products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy, respectively. It was found that reaction temperature, reaction time and different volume ratios of ethanol and distilled water played important roles on the morphologies of the obtained CuO hollow microspheres. The possible formation mechanism was also proposed according to the corresponding experimental results. The magnetic properties were investigated by superconducting quantum interference device, revealing that the CuO hollow microspheres exhibited an anomalous ferromagnetic behavior at 5 K and 300 K. At the same time, the origin of the ferromagnetism in CuO hollow microspheres was also discussed.

36 MATERIALS SCIENCE↗

α-MoO{sub 3} nanowire bundles fabricated from a self-assembled organic–inorganic precursor as cathodes for lithium-ion batteries

Graphical abstract: α-MoO{sub 3} nanowire bundles are prepared at ambient pressure as cathodes for lithium-ion batteries, which can run up to 600 cycles. - Highlights: • MoO{sub 3} nanowire bundles have been prepared. • The preparation method is facile at ambient pressure. • MoO{sub 3} nanowire bundles show good cycle performance. - Abstract: We report here the facile preparation of α-MoO{sub 3} nanowire bundles from the decomposition of the self-assembled organic–inorganic precursor Mo{sub 3}O{sub 10}(C{sub 6}H{sub 8}N){sub 2}·2H{sub 2}O at ambient pressure. The obtained samples have been fully characterized using powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses. As for cathodes of lithium-ion batteries, the as-obtained α-MoO{sub 3} nanowire bundles can initially reach a discharge capacity of 195 mAh g{sup −1} and run up to 600 cycles with a 37% capacity retention at a current density of 100 mA g{sup −1}.

36 MATERIALS SCIENCE↗

Substitutional effect of Ni on different properties of ZnO nanocrystals

Samples of pure and Ni doped ZnO nanocrystals with nominal compositions (x = 0.00, 0.03, 0.05) were successfully synthesized by Co-precipitation method. These samples were characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectrometer (FTIR). From XRD patterns it is confirmed that all samples have hexagonal (wurtzite) structure without formation any secondary phases. Atomic packing fraction (APF) and c/a ratio were calculated using XRD data. The lattice parameters of samples decrease with increasing Ni concentration. The average crystalline size was calculated by Scherrer’s formula and it is found that the average crystalline size is in the range 43-56 nm. The SEM micrographs of samples show the agglomeration of nanocrystals. Chemical species of the samples were detected using FTIR spectra. It confirms the formation of ZnO with the stretching vibrational mode around at 512 cm{sup −1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controllable synthesis and enhanced photocatalytic properties of Cu{sub 2}O/Cu{sub 31}S{sub 16} composites

Highlights: ► Facile sonochemical route. ► The content of Cu{sub 31}S{sub 16} in the Cu{sub 2}O/Cu{sub 31}S{sub 16} can be easily controlled. ► Structure and optical properties of Cu{sub 2}O/Cu{sub 31}S{sub 16} were discussed. ► Enhanced photocatalytic property of Cu{sub 2}O/Cu{sub 31}S{sub 16}. ► Cu{sub 2}O/Cu{sub 31}S{sub 16} core/shell structures were more stable than single Cu{sub 2}O particles. -- Abstract: The controlled synthesis of Cu{sub 2}O/Cu{sub 31}S{sub 16} microcomposites with hierarchical structures had been prepared via a convenient sonochemical route. Ultrasonic irradiation of a mixture of Cu{sub 2}O and (NH{sub 2}){sub 2}CS in an aqueous medium yielded Cu{sub 2}O/Cu{sub 31}S{sub 16} composites. The content of Cu{sub 31}S{sub 16} in the Cu{sub 2}O/Cu{sub 31}S{sub 16} can be easily controlled by adjusting the synthesis time. The Cu{sub 31}S{sub 16} layer not only protected and stabilized Cu{sub 2}O particles, but also prohibited the recombination of photogenerated electrons–holes pair between Cu{sub 31}S{sub 16} and Cu{sub 2}O. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) spectra, ultraviolet–visible (UV–Vis) spectroscopy and photoluminescence (PL) spectroscopy were used to characterize the products. Photocatalytic performance of the Cu{sub 2}O/Cu{sub 31}S{sub 16} hierarchical structures was evaluated by measuring the decomposition rate of methyl orange solution under natural light. To the best of our knowledge, this is the first report on the preparation and photocatalytic activity of Cu{sub 2}O/Cu{sub 31}S{sub 16} microcomposite. Additionally, the Cu{sub 2}O/Cu{sub 31}S{sub 16} core/shell structures were more stable than single Cu{sub 2}O particles during photocatalytic process since the photocatalytic activity of the second reused architecture sample was much higher than that of pure Cu{sub 2}O. The Cu{sub 2}O/Cu{sub 31}S{sub 16} microcomposites may be a good promising candidate for wastewater treatment.

36 MATERIALS SCIENCE↗

Evolution of Metastable Phases During Mg Metal Corrosion: An In Situ Cryogenic X-ray Photoelectron Spectroscopy Study

Magnesium and its alloys are potential structural materials candidates for a wide variety of applications due to their high strength-to-weight ratio. However, ductility and poor corrosion resistance under ambient environmental conditions are the bottleneck for industrial deployment. Designing passivation layers and/or corrosion resistant alloys requires fundamental understanding of the corrosion process. The traditional ex-situ spectroscopic measurements of polycrystalline metal surface with ubiquitous surface impurities and grain boundaries only provided an indistinct view of the corrosion process. To clearly distinguish the mechanism and sequence of corrosion process, we employed in-situ cryo-based x-ray photoelectron spectroscopy (XPS) measurements on Mg single crystal surface exposed to aqueous salt solution. Clean Mg (0001) surfaces were exposed to pure D2O and NaCl aqueous solution (5 wt% NaCl+95 wt% D2O). The interfacial reactions were studied using multimodal analysis including XPS, x-ray diffraction (XRD) and scanning electron microscopy (SEM). In contrast to previous studies, our experiments demonstrated the formation of magnesium chloride hydroxide hydrate during aqueous salt corrosion processes. Evidence of metastable ClO* radicals were also found during the initial aqueous salt solution exposure.

Shutthanandan, Vaithiyalingam↗

Microstructure evolution during annealing of TiAl/NiCoCrAl multilayer composite prepared by EB-PVD

TiAl/NiCoCrAl laminate composite sheet with a thickness of 0.4–0.6 mm as well as a dimension of 150 mm × 100 mm was fabricated successfully by using electron beam physical vapor deposition (EB-PVD) method. The annealing treatment was processed at 1123 and 1323 K for 3 h in a high vacuum atmosphere, respectively. The phase composition and microstructure of TiAl/NiCoCrAl microlaminated sheet have been analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Based on the sheet characterization and results of the microstructure evolution during annealing treatment process, the diffusion mechanism of interfacial reaction in TiAl/NiCoCrAl microlaminate was investigated and discussed.

36 MATERIALS SCIENCE↗

Structure and mechanical properties of Al-3Fe rapidly solidified alloy

The Al based Al-3 wt%Fe alloy was prepared by conventionally casting (ingot) and further processed the melt-spinning technique and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) together with energy dispersive spectroscopy (EDS), differential scanning calorimetry (DSC) and the Vickers microhardness tester. The rapidly solidified (RS) binary alloys were composed of supersaturated {alpha}-Al solid solution and finely dispersed intermetallic phases. Experimental results showed that the mechanical properties of RS alloys were enhanced, which can be attributed to significant changes in the microstructure. The dependence of microhardness H{sub V} on the solidification rate (V) was analysed. These results showed that with the increasing values of V, the values of H{sub V} increased.

36 MATERIALS SCIENCE↗

Microstructure and electrochemical hydrogenation/dehydrogenation performance of melt-spun La-doped Mg{sub 2}Ni alloys

This work focuses on microstructure and electrochemical hydrogen storage properties of La-doped Mg{sub 2}Ni alloys. The alloys with nominal compositions of Mg{sub 2}Ni{sub 1−x}La{sub x} (x = 0, 0.1, 0.3, 0.5) were prepared via metallurgical smelting and melt-spun on a rotating copper wheel. The scanning electron microscope, X-ray diffraction, differential scanning calorimetry and transition electron microscope, galvanostatic charging/discharging and other electrochemical measurements were employed to investigate. The results show that the increasing of La content and melt-spinning speed favors the formation of Mg–Ni–La amorphous/nanocrystalline alloys. It is found that the melt-spun ribbons display increased discharge capacities and superior cycle stabilities compared to the as-cast alloys with and without La. The potentiodynamic polarization results indicate that melt-spun La-doped Mg{sub 2}Ni ribbons possess more positive corrosion potential E{sub corr} and exhibit relatively high corrosion resistance against the alkaline solution. The mechanism for electrochemical hydrogenation/dehydrogenation has been proposed based on the effect of microstructures on the mass/charge transfer process for electrode electrochemical reaction. - Highlights: • Nanocrystalline/amorphous Mg–Ni–La alloys are obtained by melt-spinning. • Microstructures of as-cast and rapid quenched Mg{sub 2}Ni{sub 1−x}La{sub x} alloys are investigated. • Electrochemical hydrogenation properties of experimental alloys are characterized. • Electrochemical hydrogen absorption/desorption mechanism is proposed.

36 MATERIALS SCIENCE↗

Toward a tunable fabrication of multifunctional iron-aluminum spinels via solution combustion synthesis: The effects of fuel, heating mode, and Fe:Al precursor ratio

The solid solutions of iron and aluminum spinels (hercynite, maghemite, magnetite, and γ-alumina) are promising materials for emerging technologies such as solar thermochemical fuel production and clean dehydrogenation of fossil fuels. Solution combustion synthesis (SCS) is an attractive technique for the fabrication of these materials as it has been used for synthesis of many nanoscale oxides. However, the design space of SCS is large with many synthesis parameters affecting the properties of the combustion products. To optimize the SCS of these materials, it is important to determine which parameters yield the best properties. In the present work, FeAlO x nanocomposites were obtained by SCS using iron nitrate and aluminum nitrate as precursors and oxidizers. Two fuels (citric acid and glycine), three Fe:Al molar ratios (1:2, 1:1, and 2:1) in the precursors, and three heating modes (hotplate, muffle furnace, and microwave oven) were compared. The products were characterized by X-ray diffraction analysis, scanning electron microscopy, Brunauer-Emmett-Teller surface area analysis, and laser diffraction particle size analysis. The fuel used had the largest impact on the combustion behavior and hence the material properties. The high combustion temperature of glycine allowed for the formation of an FeAl 2 O 4 /Fe 3 O 4 solid solution, while the lower-temperature combustion of citric acid yielded Al-substituted γ-Fe 2 O 3 with high amorphous content. With citric acid, the specific surface area as high as 200 m 2 /g was achieved. The effect of Fe:Al precursor ratio was clearly seen in variations of the lattice parameter, which demonstrated the ability to tune the phase composition. The heating mode had minor effects on material properties, but some differences were observed. As a result, all products obtained by SCS in a microwave oven had low specific surface areas compared to those obtained with a hotplate and a muffle furnace.

Alumina↗

Electrochemical performance and enhanced photocatalytic activity of Ce-doped BiVO{sub 4} under visible light irradiation

Highlights: • Ce-BiVO{sub 4} was synthesized via a simple precipitation-impregnation method. • Photo-generated electrons transfer from the BiVO{sub 4} to the Ce{sup 4+} ions. • The enhanced interfacial electron transfer for Ce-BiVO{sub 4} was observed using EIS and photocurrent. • The enhanced activity of Ce-BiVO{sub 4} is mainly attributed to the increased charge separation. - Abstract: Ce-BiVO{sub 4} composites have been synthesized via a simple precipitation-impregnation method and were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectrum (DRS), electrochemical impedance spectrum (EIS) and photocurrent. All the BiVO{sub 4} and Ce-BiVO{sub 4} samples are composed of monoclinic scheelite BiVO{sub 4}. Compared to BiVO{sub 4}, the increased photocurrent and decreased diameter of the semicircle have been observed for Ce-BiVO{sub 4}, indicating that the Ce-doping can enhance interfacial electron transfer for Ce-BiVO{sub 4}. Ce-BiVO{sub 4} composites show enhanced activity in the photocatalytic degradation of rhodamine B under visible light irradiation in comparison with P25 and pure BiVO{sub 4}, and 1.0%Ce-BiVO{sub 4} shows the best photocatalytic activity because of its enhanced light absorption, narrowed bandgap and improved separation of the photogenerated electron–hole pairs, which was achieved as a result of photogenerated electrons transfer from the BiVO{sub 4} to the Ce{sup 4+} ions.

36 MATERIALS SCIENCE↗

Investigation of the nonlocal nonlinear optical response of copper nanostructured thin films prepared by pulsed laser deposition

Nanostructured copper thin films have been prepared using the pulsed laser deposition method. Optical absorption spectra of these films exhibit plasmonic absorption peaks around 619 nm, which suggests the formation of copper nanoparticles on their surfaces. Scanning electron micrographs of the films confirm the nanoparticle formation on the films surfaces. After laser beam passing through the thin films, the observed diffraction rings on a far-field screen have been recorded. Despite the smallness of the maximal axial phase shifts of the films, which have been obtained using the nonlocal z-scan theory, a series of low-intensity rings can be observed on the far field screen for some specific positions of the thin films from the focal point. It is shown that the best approach to determining the sign and magnitude of the nonlinear refractive index of thin samples is the application of the conventional closeaperture z-scan method. (nanostructures)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Layered-structural monoclinic–orthorhombic perovskite La{sub 2}Ti{sub 2}O{sub 7} to orthorhombic LaTiO{sub 3} phase transition and their microstructure characterization

The layered-structural ceramics, such as lanthanum titanate (La{sub 2}Ti{sub 2}O{sub 7}), have been known for their good temperature and low dielectric loss at microwave frequencies that make them good candidate materials for high frequency applications. However, few studies have been conducted on the synthesis optimization by sol gel reaction, in particular by acrylamide polymerization route. The interest in La{sub 2}Ti{sub 2}O{sub 7} ceramic has been greatly increased recently due to the effect of oriented grains. This anisotropy of the microstructure leads to anisotropy in dielectric, electrical and mechanical properties. In this study, grain oriented lanthanum titanate was produced by the sol–gel acrylamide polymerization route. The characterizations of the samples were achieved by thermal analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM). X-ray diffraction indicates that the formation of monoclinic perovskite La{sub 2}Ti{sub 2}O{sub 7} nanocrystals is a necessary first step to obtain orthorhombic LaTiO{sub 3} nanocomposites (with space group Pbnm). In this work we identified that the monoclinic perovskite La{sub 2}Ti{sub 2}O{sub 7} with space group P2{sub 1} transforms its structure into one with the orthorhombic space group Cmc2{sub 1} at approximately 1073 K. The microstructure associated consisted of flaky monoclinic La{sub 2}Ti{sub 2}O{sub 7} nanocomposites in comparison with round-shaped LaTiO{sub 3} nanocomposites. - Highlights: • The flaky-like La{sub 2}Ti{sub 2}O{sub 7} compound was synthesized by sol–gel acrylamide route. • Simultaneous monitoring of the DTA and XRD with temperature was performed. • Phase transformation characterization of La{sub 2}Ti{sub 2}O{sub 7} has been carried out. • The variation of the La{sub 2}Ti{sub 2}O{sub 7} and LaTiO{sub 3} grain morphology has been compared.

36 MATERIALS SCIENCE↗

Electrical transport properties of manganese containing pyrochlore type semiconducting oxides using impedance analyses

Graphical abstract: DC conductivity variation of CaCe{sub 1−x}Mn{sub x}SnNbO{sub 7−δ} (x = 0, 0.2, 0.4 and 0.6) with inverse of temperature. Variation of conductivity with Mn concentration at 600 °C is shown in the inset. Display Omitted Highlights: ► We have observed that the structural ordering as well as grain size increase with Mn substitution. ► Impedance analysis proved that a correlated barrier hopping type conduction mechanism is involved in the materials. ► Activation energy as well as electrical conductivity increases with increase in Mn substitution. ► Localization of electrons associated with Mn{sup 2+} and structural ordering are the key factors for the increased activation energy with Mn substitution. ► All the materials showed good NTC thermistor properties. -- Abstract: A new series of manganese containing pyrochlore type semiconducting oxides CaCe{sub 1−x}Mn{sub x}SnNbO{sub 7−δ} (x = 0, 0.2, 0.4 and 0.6) have been synthesized to study the effect of Mn substitution on the structure, microstructure and electrical properties of these samples. X-ray diffraction and scanning electron microscopy studies revealed an increase of structural ordering and grain size respectively with increase of Mn substitution. Rietveld analysis and Raman spectroscopy were also employed to corroborate the XRD results. The bulk resistance measurements with temperature exhibit negative temperature coefficient behavior. The impedance analysis of the samples revealed a non-Debye type relaxation existed in the materials. The ac conductivity variation with temperature and frequency indicates a correlated barrier hopping type conduction mechanism in these materials. The barrier height and the intersite separation for hopping influence the electrical conductivity of these samples and are found to be a function of localization of electrons associated with the Mn{sup 2+} ions and the unit cell volume respectively. The Mn substitution increases both electrical conductivity and activation energy contrastingly. This unusual behavior has been explained by correlating the structure, microstructure, defect states, electron localization and intersite separation with the conductivity data of the samples.

36 MATERIALS SCIENCE↗