Search NASA⌕ Search

SEARCH · Search NASA

Results for “solvent change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Physical aging and solvent effects on the fracture of LaRC-TPI adhesives

When amorphous materials are quenched below their glass transition temperature, excess enthalpy is trapped in the glassy material because the viscosity is too great to allow the material to remain in volumetric equilibrium. Over time, this excess free volume is reduced as the material slowly approaches its equilibrium configuration. This process, known as physical aging, leads to substantial changes in the constitutive behavior of polymers, as has been widely discussed in the literature. Less is known about the effects of this physical aging process on fracture and fatigue properties of aged materials. The original goal of the summer was to investigate the effects of physical aging on the fracture and fatigue behavior of LaRC-TPI, a thermoplastic polyimide developed at NASA-Langley. Preliminary results are reported, although a lack of equipment availability prevented completion of this task. In the process of making specimens, the current LaRC-TPI was observed to be extremely susceptible to environmental stress cracking. A study of the unique failure patterns resulting from this degradation process in bonded joints was conducted and is also reported herein.

Dillard, David A.↗
DOE OSTI2020

Revealing the Structural Evolution of Green Rust Synthesized in Ionic Liquids by In Situ Molecular Imaging

Abstract Ionic liquids are green solvents that have wide applications in material synthesis, catalysis, and separation. A model switchable ionic liquid (SWIL) consisting of 1,8‐diazabicycloundec‐7‐ene (DBU) and 1‐hexanol with carbon dioxide (CO 2 ) as the trigger gas is chosen to synthesize nanocrystalline green rust. Under anoxic conditions, by adding iron (II) acetate (Fe(C 2 H 3 O 2 ) 2 ) and methanol to the degassed SWIL, a nanoparticulate green rust with carbonate (nano‐GR) is synthesized. More importantly, the molecular structural change of the ionic liquid resulting in green rust crystallines is first characterized using in situ liquid using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) coupled with the system for analysis at the liquid vacuum interface (SALVI), a vacuum compatible microfluidic reactor in this work. Dimers and ionic clusters consisting ferric and ferrous ions are identified in liquid ToF‐SIMS spectra. Spectral principal component analysis is used to confirm that these ion pairs including dimers and cluster ions are different from nonionic liquids. The results show that liquid ToF‐SIMS can be a useful tool to study complex liquids at the molecular level providing insights into predicative synthesis of nanomaterials using environmentally friendly green solvents and giving unique visualization of the evolving material interface due to nucleation.

Shen, Yanjie↗
DOE OSTI2022

Computational analysis of the tryptophan cation radical energetics in peroxidase Compound $\mathrm{I}$

Three well-characterized heme peroxidases (cytochrome c peroxidase = CCP, ascorbate peroxidase = APX, and Leishmania major peroxidase = LMP) all have a Trp residue tucked under the heme stacked against the proximal His heme ligand. The reaction of peroxidases with H 2 O 2 to give Compound I results in the oxidation of this Trp to a cationic radical in CCP and LMP but not in APX. Considerable experimental data indicate that the local electrostatic environment controls whether this Trp or the porphyrin is oxidized in Compound I. Attempts have been made to place the differences between these peroxidases on a quantitative basis using computational methods. These efforts have been somewhat limited by the approximations required owing to the computational cost of using fully solvated atomistic models with well-developed forcefields. This now has changed with available GPU computing power and the associated development of software. Here we employ thermodynamic integration and multistate Bennett acceptance ratio methods to help fine-tune our understanding on the energetic differences in Trp radical stabilization in all three peroxidases. These results indicate that the local solvent structure near the redox active Trp plays a significant role in stabilization of the cationic Trp radical.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Design of CO 2 Selective Type 3 Porous Liquids Through Porous Host Morphology

Direct air capture (DAC) of CO 2 is a negative emission technology under development to limit the impacts of climate change. The dilute concentration of CO 2 in the atmosphere (~400 ppm) requires new materials for carbon capture with increased CO 2 selectivity that is not met with current carbon capture materials. Porous liquids (PLs) are an emerging candidate for carbon capture and consists of a combination of solvents and porous hosts that creates a liquid with permanent porosity. The fundamental mechanisms of carbon capture in a PL are relatively unknown. To uncover these mechanisms, PLs were synthesized consisting of three different zeolitic-imidazolate framework (ZIF-8, ZIF-67, or ZIF-69) porous host in a water/glycol/2-methylimidazole solvent. The most stable composition was based on ZIF-8 and exhibited carbon capture following exposure to CO 2 . Density functional theory identified a three-step carbon capture mechanism based on (i) reaction of OH- with ethylene glycol in the solution followed by (ii) formation of 2-hydroxyethyl carbonate, which (iii) further react with OH- to form a carbonate species. This mechanism was validated with experimental nuclear magnetic resonance spectroscopy (NMR) to identify the dissolved carbonate phases and the decrease in the pH during CO 2 exposure. Deuterated samples of the ZIF-8 PLs were synthesized and analyzed via neutron diffraction at the Spallation Neutron Sources at Oak Ridge National Laboratory. Results identified differences in diffraction for PLs pre- and post-CO 2 exposure that will be combined with ab initio molecular dynamics data of the same PL composition to identify how the presence of a solvent-porous host interfaces results in carbon capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding Europium and Terbium Speciation and Ion Pairing in Carbonate Complexes Using Advanced Spectroscopy Techniques

Lanthanide (Ln) elements are critical materials that are typically extracted/mined together. Their separation by solvent extraction from acidic media is well known; however, there are few studies in basic media with carbonate anions. We investigated the complexation of Eu(III) and Tb(III) carbonates as solids and solutions in alkaline K2CO3, wherein we sought to access a Tb(IV) carbonate complex through ozonolysis. L3-edge XANES of Eu and Tb carbonate solids, colorless solutions, and a red-hued Tb solution (obtained by ozonolysis) all showed Ln(III) cations. The absence of evidence for a Tb(IV) complex was confirmed through XAS and EPR analyses, despite the solution exhibiting a deep red color. For solids and solutions, EXAFS results indicate molecular Ln(III)-carbonato anions. In terms of the Eu(III) carbonate coordination number, the coordination does not change upon dissolution of the solid sample. Furthermore, EXAFS for the solutions revealed evidence for the association of potassium cations with the Ln(III)-carbonato anions. Furthermore, this direct observation of contact ion pairing by EXAFS at room temperature is rare. The insights into Ln(III) carbonate complexation and solution speciation afforded by XANES-EXAFS, FT-IR, and EPR provides perspectives that serve as benchmarks for future computational and experimental efforts focused on caustic-side solvent extraction of Ln(III) ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Efficacy of Stabilizing Calcium Battery Electrolytes through Salt-Directed Coordination Change

Achieving practical, high-energy-density calcium batteries requires controlling the stability of Ca 2+ electrolytes during calcium metal cycling. Because of the highly reactive nature of calcium, most typical electrolyte constituents are unstable, leading to electrode passivation and low Coulombic efficiency. Among various commercially available salts, calcium bis(trifluoromethylsulfonyl)imide (Ca(TFSI) 2 ) is attractive because of its oxidative stability and high solubility in a variety of solvents. However, this salt does not allow for calcium metal plating, and it has been proposed that TFSI – instability induced by Ca 2+ coordination is to blame. In this work, we test the ability of strongly coordinating Ca 2+ cosalts such as halides and borohydrides to displace TFSI – from the first coordination shell of Ca 2+ and thereby stabilize TFSI-based electrolytes to enable calcium plating. Through spectroscopic analysis, we find that the effectiveness of these cosalts at displacing the TFSI – anion is dependent on the solvent’s coordination strength toward Ca 2+ . Surprisingly, electrochemical calcium deposition behavior is not correlated to the population of bound or free TFSI – . Instead, the nature of the coordination interaction between Ca 2+ and the cosalt anion is more important for determining stability. Our findings indicate that TFSI – anions are inherently unstable during calcium deposition even in the nominally free state. Furthermore, strategies aimed at eliminating the interactions of these anions with the electrode surface via interface/interphase design are required.

25 ENERGY STORAGE↗
DOE OSTI2020

Chemical control of competing electron transfer pathways in iron tetracyano-polypyridyl photosensitizers

Photoinduced intramolecular electron transfer dynamics following metal-to-ligand charge-transfer (MLCT) excitation of [Fe(CN) 4 (2,2'-bipyridine)] 2- (1), [Fe(CN) 4 (2,3-bis(2-pyridyl)pyrazine)] 2- (2) and [Fe(CN) 4 (2,2'-bipyrimidine)] 2- (3) were investigated in various solvents with static and time-resolved UV-Visible absorption spectroscopy and Fe 2p3d resonant inelastic X-ray scattering (RIXS). This series of polypyridyl ligands, combined with the strong solvatochromism of the complexes, enables the 1 MLCT vertical energy to be varied from 1.64 eV to 2.64 eV and the 3 MLCT lifetime to range from 180 fs to 67 ps. The 3 MLCT lifetimes in 1 and 2 decrease exponentially as the MLCT energy increases, consistent with electron transfer to the lowest energy triplet metal-centred ( 3 MC) excited state, as established by the Tanabe–Sugano analysis of the Fe 2p3d RIXS data. In contrast, the 3 MLCT lifetime in 3 changes non-monotonically with MLCT energy, exhibiting a maximum. This qualitatively distinct behaviour results from a competing 3 MLCT → ground state (GS) electron transfer pathway that exhibits energy gap law behaviour. The 3 MLCT → GS pathway involves nuclear tunnelling for the high-frequency polypyridyl breathing mode (hν = 1530 cm -1 ), which is most displaced for complex 3, making this pathway significantly more efficient. Our study demonstrates that the excited state relaxation mechanism of Fe polypyridyl photosensitizers can be readily tuned by ligand and solvent environment. Furthermore, our study reveals that extending charge transfer lifetimes requires control of the relative energies of the 3 MLCT and the 3 MC states and suppression of the intramolecular distortion of the acceptor ligand in the 3 MLCT excited state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Using a Chromatographic Pseudophase Model To Elucidate the Mechanism of Olefin Separation by Silver(I) Ions in Ionic Liquids

Silver(I) ions undergo selective olefin complexation and have been utilized in various olefin/paraffin separation techniques such as argentation chromatography and facilitated transport membranes. Ionic liquids (ILs) are solvents known for their low vapor pressure, high thermal stability, low melting points, and ability to promote a favorable solvation environment for silver(I) ion–olefin interactions. To develop highly selective separation systems, a fundamental understanding of analyte partitioning to the stationary phase and the thermodynamic driving forces behind solvation is required. In this study, a chromatographic model treating silver(I) ions as a pseudophase is constructed and employed for the first time to investigate the olefin separation mechanism in silver(I) salt/IL mixtures. Stationary phases containing varying amounts of noncoordinated silver(I) salt ([Ag + ][NTf 2 – ]) dissolved in the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C 10 MIM + ][NTf 2 – ]) IL are utilized to determine the partition coefficients of various analytes including alkanes, alkenes, alkynes, aromatics, aldehyde, esters, and ketones. As ligand coordination to silver(I) ions is known to lower its olefin complexation capability, this study also examines two different types of coordinated silver(I) ion pseudophases, namely, monocoordinated silver(I) salt ([Ag + (1-decyl-2-methylimidazole, DMIM)][NTf 2 – ]) and dicoordinated silver(I) salt ([Ag + (1-methylimidazole, MIM)(DMIM)][NTf 2 – ]). The extent of olefin partitioning to the coordinated silver(I) ion pseudophases over the carrier gas and IL decreased by up to two orders of magnitude. Values for enthalpy, entropy, and free energy of solvation were determined for the three silver(I) ion-containing systems. Olefin retention was observed to be enthalpically dominated, while ligand coordination to the silver(I) ion pseudophase resulted in variations for both enthalpic and entropic contributions to the free energy of solvation. Furthermore, the developed model can be used to study chemical changes that occur in silver(I) ions over time as well as identify optimal silver(I) salt/IL mixtures that yield high olefin selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reductive pathways in molten inorganic salts enable colloidal synthesis of III-V semiconductor nanocrystals

Colloidal quantum dots, with their size-tunable optoelectronic properties and scalable synthesis, enable applications in which inexpensive high-performance semiconductors are needed. Synthesis science breakthroughs have been key to the realization of quantum dot technologies, but important group III-group V semiconductors, including colloidal gallium arsenide (GaAs), still cannot be synthesized with existing approaches. The high-temperature molten salt colloidal synthesis introduced in this work enables the preparation of previously intractable colloidal materials. We directly nucleated and grew colloidal quantum dots in molten inorganic salts by harnessing molten salt redox chemistry and using surfactant additives for nanocrystal shape control. Synthesis temperatures above 425°C are critical for realizing photoluminescent GaAs quantum dots, which emphasizes the importance of high temperatures enabled by molten salt solvents. We generalize the methodology and demonstrate nearly a dozen III-V solid-solution nanocrystal compositions that have not been previously reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Infusion extractor

This invention relates to an apparatus and method of removing desirable constituents from an infusible material by infusion extraction. A piston operating in a first chamber draws a solvent into the first chamber where it may be heated, and then moves the heated solvent into a second chamber containing the infusible material, where infusion extraction takes place. The piston then moves the solvent containing the extract through a filter into the first chamber, leaving the extraction residue in the second chamber. The method is applicable to operation in low or micro-gravity environments.

Chang-Diaz, Franklin R.↗
DOE OSTI2021

Lithium-ion battery physics and statistics-based state of health model

A pseudo-2d model using COMSOL Multiphysics® software is developed to simulate performance and performance degradation of Li-ion batteries consisting of layered and olivine cathodes with graphite anode when subjected to peak shaving grid service. Multiple degradation pathways are considered, including solid electrolyte interphase (SEI) formation and breakdown at the anode, cathode dissolution and its synergistic effect on SEI formation at the anode. The model is validated by simulating commercial cylindrical cell performance. A global model is developed to simulate performance across all chemistries, along with individual chemistry models using global model parameters as initial values. There is good agreement between these models for various optimization parameters such as SEI equilibrium potential, cathode dissolution exchange current density, solvent diffusivity in the SEI and SEI ionic conductivity. To circumvent time constraints related to the COMSOL model, a 0d global model is developed which fits data well and provides more clarity on differences in cathode dissolution exchange current density. Again, good agreement for various optimization parameters is obtained among the COMSOL global & individual chemistry models and the 0-d model. The lessons learned from the physics-based model is used to develop a top down statistics-based model using current, voltage and anode volumetric change per mole lithium intercalated, along with their interactions as degradation predictors. This model predicts out of sample degradation for multiple grid services and electric vehicle drive cycle with high accuracy and provides the pathway to develop an efficient battery management system combining machine learning and findings from physics-based computationally intensive algorithms.

Crawford, Aladsair J.↗
DOE OSTI2021

Impact of functional groups on the electrocatalytic hydrogenation of aromatic carbonyls to alcohols

We report that electrocatalytic hydrogenation (ECH) of biomass-derived feedstocks has a critical dependence on the molecular structure of the organic and its adsorption on the electrode surface. In this study, we investigated the role of functional groups in the adsorption of the organic molecule on the charged Pd (111) surface and its subsequent effect on organic reduction in electrochemical hydrogenation of organic molecules. With three aromatic carbonyls of benzaldehyde (BZD), acetophenone (ACE), and vanillin (VAN), we rationalize molecular-scale adsorption and interfacial charge transfer processes by employing density-functional-theory based ab initio molecular dynamics simulations. We observe that the functional group and electrode charge strongly affect the proximity of organic molecule to the Pd (111) surface, where distances of aromatic ring and carbonyl group of the organic on the electrode change distinctively with functional groups and charge state of electrode, which strongly impact reduction of organics on the surface. Calculations of differential electron density show the strongest reduction with benzaldehyde via interfacial electron transfer from the charged Pd surface. We also observe that the interaction between the functional groups and solvent (VAN > BZD > ACE) significantly influence the organic interaction with the charged electrode (BZD > VAN > ACE), resulting in the net interaction energy between the organic and the electrode in the order of BZD > ACE > VAN. Experimental measurement of ECH rate also show the same trend of the net interaction energy. These results demonstrate the significance of solvent effect on the reducibility of organic molecules on electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Solvent-free and low temperature synthesis of chalcogenide Na superionic conductors for solid-state batteries

Sodium chalcogenide ionic conductors are attractive candidates as solid electrolytes (SEs) in solid-state Na metal batteries. They show the advantages of high ionic conductivity of 10 –4 –10 –2 S cm –1 at room temperature and great chemical stability in air. However, simple, efficient, and scalable approaches for the synthesis of chalcogenide solid electrolytes (SEs) are required. In this work, we report a solvent-free mixing to form dry intermediate products, which are subjected to different treatments (electron-beam assisted method or low temperature heating (≤150 °C)) to produce pure phase of Na 3 SbS 4-y Se y (0 ≤ y < 2) chalcogenides. Heavy Se-doping in Na 3 SbS 4 results in the tetragonal-to-cubic phase transition as well as a significant change of Sb-S bonding in Raman spectra. Among all chalcogenide SEs, Na 3 SbS 3 Se showed the highest ionic conductivity of 3.75 × 10 –4 S cm –1 at room temperature, 47% higher than that of pristine Na 3 SbS 4 . Moreover, the Se-dopant also enhanced the electrochemical stability towards Na metal in solid-state batteries. The solid-state Na||FeS 2 battery with Na 3 SbS 3 Se SE displayed long-term cycling ability up to 1,000 cycles within the voltage window of 1.0–2.7 V and retained a specific capacity of 105 mAh g –1 after 600 cycles. As a result, this technique promotes the practical applications of chalcogenide SEs in solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Use of Machine Learning for Signature Development in a Multi-Sensor Environment for Safeguard Applications of Solvent Extraction Processes

Idaho National Laboratory is constructing the Special Nuclear Material test bed (Beartooth) for research and development pertaining to nuclear fuel processing operations using centrifugal contactors. Beartooth will enable give researchers the opportunity to study the dissolution, separation, and conversion of special nuclear materials (e.g., plutonium, enriched uranium, and thorium). As a lead-in to Beartooth, this project constructed a test bed to study the process and equipment behavior with real time series data collection using a variety of non-traditional sensors, in order to identify process failures and label them as either accidental or purposeful, thus enhancing nuclear nonproliferation stewardship. The measurement sources in this test bed include vibration, acoustic, current, flow, colorimetric, and thermal data. These measurements vary in terms of magnitude, frequency, and location. This information will be combined and used within data-driven machine-learning methods to detect operation condition changes that are either intentional (i.e., changes in operating set points) or malicious (i.e., flow diversion) in nature. This presentation covers the data processing and signature development activities necessary for utilizing this heterogeneous dataset to classify process anomalies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Does Water Enhance Mg Intercalation in Oxides? The Case of a Tunnel Framework

The presence of H 2 O has been linked to enhancements in the reactivity of cathodes for Mg 2+ electrochemistry. If the enhancements were mimicked by nonaqueous solvents, they could enable Mg batteries with transformational energy density. However, the extent to which H 2 O may boost actual intercalation of Mg 2+ , as opposed to competing reactions, has not been elucidated. Here, in this paper, we evaluate its role as additive in the electrochemistry of a tunnel polymorph of V 2 O 5 in a nonaqueous Mg 2+ electrolyte. The electrochemical response and V reduction in the cathodes positively correlated with H 2 O concentration, but it was not concurrent with commensurate changes in cell volume and Mg content. These observations indicate that H 2 O does not enhance Mg 2+ intercalation, but rather, it promotes competing pathways. This work shows the importance of accurately probing reactions in multivalent electrolytes. Importantly, it indicates that H 2 O is not a universal solution to the challenge of Mg 2+ intercalation in oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effective biomass fractionation and lignin stabilization using a diol DES system

A sustainable and renewable biorefinery will increase the economic viability of lignocellulose-derived products. In this study, a diol-based deep eutectic solvent (DES) was developed to reduce the recalcitrance of bamboo, facilitate saccharification and valorize the lignin fraction. The DES pretreatment dramatically enhanced glucan digestibility by the effective removal of lignin (as high as 85.45%) and xylan (91.12%). Notably, the recovered lignin from DES pretreatment was protected during the fractionation, showing well-preserved β-O-4 structures (31.82%–59.06%). The mechanism of lignin protection was analyzed to be accomplished by incorporating the diol hydroxyl functional groups into the α position of the lignin β-O-4 structure via etherification. This work highlighted that diol DES is a promising pretreatment solvent to valorize both cellulose and lignin fractions with high enzymatic hydrolysis yield and high-quality lignin co-product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Analytic Binary Alloy Volume–Concentration Relations and the Deviation from Zen’s Law

Alloys expand or contract as concentrations change, and the resulting relationship between atomic volume and alloy content is an important property of the solid. While a well-known approximation posits that the atomic volume varies linearly with concentration (Zen’s law), the actual variation is more complicated. Here we use the apparent size of the solute (solvent) atom and the elasticity to derive explicit analytical expressions for the atomic volume of binary solid alloys. Two approximations, continuum and terminal, are proposed. Deviations from Zen’s law are studied for 22 binary alloy systems.

36 MATERIALS SCIENCE↗