Search NASA⌕ Search

SEARCH · Search NASA

Results for “spacecraft formations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

A Preliminary Formation Flying Orbit Dynamics Analysis for Leonardo-BRDF

Leonardo-BRDF is a NASA mission concept proposed to allow the investigation of radiative transfer and its effect on the Earth's climate and atmospheric phenomenon. Enabled by the recent developments in small-satellite and formation flying technology, the mission is envisioned to be composed of an array of spacecraft in carefully designed orbits. The different perspectives provided by a distributed array of spacecraft offer a unique advantage to study the Earth's albedo. This paper presents the orbit dynamics analysis performed in the context of the Leonardo-BRDF science requirements. First, the albedo integral is investigated and the effect of viewing geometry on science return is studied. The method used in this paper, based on Gauss quadrature, provides the optimal formation geometry to ensure that the value of the integral is accurately approximated. An orbit design approach is presented to achieve specific relative orbit geometries while simultaneously satisfying orbit dynamics constraints to reduce formation-keeping fuel expenditure. The relative geometry afforded by the design is discussed in terms of mission requirements. An optimal two-burn initialization scheme is presented with the required delta-V to distribute all spacecraft from a common parking orbit into their appropriate orbits in the formation. Finally, formation-keeping strategies are developed and the associated delta-V's are calculated to maintain the formation in the presence of perturbations.

Hughes, Steven P.↗
NASA NTRS2012

Current-State Constrained Filter Bank for Wald Testing of Spacecraft Conjunctions

We propose a filter bank consisting of an ordinary current-state extended Kalman filter, and two similar but constrained filters: one is constrained by a null hypothesis that the miss distance between two conjuncting spacecraft is inside their combined hard body radius at the predicted time of closest approach, and one is constrained by an alternative complementary hypothesis. The unconstrained filter is the basis of an initial screening for close approaches of interest. Once the initial screening detects a possibly risky conjunction, the unconstrained filter also governs measurement editing for all three filters, and predicts the time of closest approach. The constrained filters operate only when conjunctions of interest occur. The computed likelihoods of the innovations of the two constrained filters form a ratio for a Wald sequential probability ratio test. The Wald test guides risk mitigation maneuver decisions based on explicit false alarm and missed detection criteria. Since only current-state Kalman filtering is required to compute the innovations for the likelihood ratio, the present approach does not require the mapping of probability density forward to the time of closest approach. Instead, the hard-body constraint manifold is mapped to the filter update time by applying a sigma-point transformation to a projection function. Although many projectors are available, we choose one based on Lambert-style differential correction of the current-state velocity. We have tested our method using a scenario based on the Magnetospheric Multi-Scale mission, scheduled for launch in late 2014. This mission involves formation flight in highly elliptical orbits of four spinning spacecraft equipped with antennas extending 120 meters tip-to-tip. Eccentricities range from 0.82 to 0.91, and close approaches generally occur in the vicinity of perigee, where rapid changes in geometry may occur. Testing the method using two 12,000-case Monte Carlo simulations, we found the method achieved a missed detection rate of 0.1%, and a false alarm rate of 2%.

Carpenter, J. Russell↗
NASA NTRS2004

Structural Modeling for the Terrestrial Planet Finder Mission

We present the most recent propulsion requirements for the Laser Interferometer Space Antenna (LISA) Mission and describe potential microth ruster technology that can meet these requirements. LISA consists of three spacecraft in heliocentric orbits, forming a triangle with 5x l o6 km sides that are the arms of three Michelson-type interferometers. Reflective proof masses provide the reference surfaces at the end of the interferometer arms as part of the Gravitational Reference Senso r (GRS) designed to detect gravitational waves. The microthrust propu lsion system will be part of the Disturbance Reduction System (DRS), which is responsible for maintaining each spacecraft position within approximately 10 nm around the proof masses. To provide the necessary sensitivity, the GRS must not experience spurious accelerations > 10 (exp -15) m/s(exp 2)# Hz (exp -1/2) in the 0.1 mHz to 1 Hz bandwidth, requiring precision formation flying and drag-free operation of the L ISA spacecraft. This leads to the following microthruster performance requirements: a thrust range of 2-30 microN, a thrust resolution < O .1 micro N, and thrust noise <0.1 micro N Hz (exp -1/2) over the LISA measurement bandwidth. The microthruster must provide this performanc e for 5 years continuously, contain 10 years worth of propellant, and not disrupt the science measurements. Potential microthruster techno logies include Colloid, Field Emission Electric Propulsion (FEEP), and precision cold gas microthrusters. Each of these technologies is des cribed in detail with focus on the NASA microthruster development of the Busek Colloid Micro-Newton Thruster (CMNT).

coronagraphs↗
NASA NTRS1984

Spacecraft glow

Spacecrft glow may be defined as optical emissions originating immediately above those surfaces of an orbiting spacecraft which face into the ram direction. In the case of the Space Shuttle at its lower orbital altitudes, the glow is bright enough to be seen by the unaided eye. The glow observed at the Dynamics Explorer was caused primarily by OH molecules which formed on the spacecraft surface from ionospheric atomic oxygen and hydrogen. The two theories which are currently considered to obtain an explanation for the glow phenomenon include the plasma interaction mechanism and the chemical mechanism. A number of difficulties appear to exclude the applicability of the plasma interaction mechanism. Thus, the chemical mechanism remains as the only viable theory. According to this mechanism, simple impact of incoming atmosphere atoms and molecules causes both formation and excitation of molecules at the surface of a spacecraft.

Dessler, A. J.↗
NASA NTRS2003

The Genesis Mission: An Overview

One of the scientists studying the formation of planets is Don Burnett, principal investigator of the Genesis mission. He designed a NASA project to collect a sample of solar material that may help scientists answer important and puzzling questions. In August 2002, NASA launched the Genesis spacecraft. The spacecraft is not a time machine; it cannot go back to the time of formation of the solar system. What it will do is the next best thing. The Genesis spacecraft will journey toward the sun. It will go to a place outside the Earth's magnetic field where the Earth and sun gravities are balanced. While in orbit, the spacecraft will bathe in solar wind that is flung out from the sun. Solar wind particles are similar to material from which the planets formed, and are atoms, ions, or high-energy particles.

Source record↗
NASA NTRS1993

A ground-based memory state tracker for satellite on-board computer memory

The TOPEX/POSEIDON satellite, currently in Earth orbit, will use radar altimetry to measure sea surface height over 90 percent of the world's ice-free oceans. In combination with a precise determination of the spacecraft orbit, the altimetry data will provide maps of ocean topography, which will be used to calculate the speed and direction of ocean currents worldwide. NASA's Jet Propulsion Laboratory (JPL) has primary responsibility for mission operations for TOPEX/POSEIDON. Software applications have been developed to automate mission operations tasks. This paper describes one of these applications, the Memory State Tracker, which allows the ground analyst to examine and track the contents of satellite on-board computer memory quickly and efficiently, in a human-readable format, without having to receive the data directly from the spacecraft. This process is accomplished by maintaining a groundbased mirror-image of spacecraft On-board Computer memory.

Quan, Alan↗
NASA NTRS1990

CDAW 7 revisited - Further evidence for the creation of a near-earth substorm neutral line

Eastman et al. (1988) have interpreted the CDAW 7 substorm of April 24, 1979, previously taken as unambiguously supporting the near-earth neutral line model of magnetospheric substorms, in terms of spatial movements of a preexisting plasma-sheet boundary layer (PSBL) and its associated current sheets across the observing ISEE 1 and 2 spacercraft. It is presently noted that, by contrast, a reinvestigation of ISEE 1 and 2 energetic particle measurements around substorm onset on short time-scales shows the observed flux pattern to require the formation of a particle source eastward of the ISEE spacecraft, well within the plasma sheet, associated with the substorm onset. Strong flows were absent prior to substorm onset, indicating the temporal nature of the event, as opposed to an encounter with a preexisting PSBL containing large flows.

Kettmann, G.↗
NASA NTRS1992

EnviroNET: An on-line environment data base for LDEF data

EnviroNET is an on-line, free form data base intended to provide a centralized depository for a wide range of technical information on environmentally induced interactions of use to Space Shuttle customers and spacecraft designers. It provides a user friendly, menu driven format on networks that are connected globally and is available twenty-four hours a day, every day. The information updated regularly, includes expository text, tabular numerical data, charts and graphs, and models. The system pools space data collected over the years by NASA, USAF, other government facilities, industry, universities, and ESA. The models accept parameter input from the user and calculate and display the derived values corresponding to that input. In addition to the archive, interactive graphics programs are also available on space debris, the neutral atmosphere, radiation, magnetic field, and ionosphere. A user friendly informative interface is standard for all the models with a pop-up window, help window with information on inputs, outputs, and caveats. The system will eventually simplify mission analysis with analytical tools and deliver solution for computational intense graphical applications to do 'What if' scenarios. A proposed plan for developing a repository of LDEF information for a user group concludes the presentation.

Lauriente, Michael↗
NASA NTRS2002

Partially Decentralized Control Architectures for Satellite Formations

In a partially decentralized control architecture, more than one but less than all nodes have supervisory capability. This paper describes an approach to choosing the number of supervisors in such au architecture, based on a reliability vs. cost trade. It also considers the implications of these results for the design of navigation systems for satellite formations that could be controlled with a partially decentralized architecture. Using an assumed cost model, analytic and simulation-based results indicate that it may be cheaper to achieve a given overall system reliability with a partially decentralized architecture containing only a few supervisors, than with either fully decentralized or purely centralized architectures. Nominally, the subset of supervisors may act as centralized estimation and control nodes for corresponding subsets of the remaining subordinate nodes, and act as decentralized estimation and control peers with respect to each other. However, in the context of partially decentralized satellite formation control, the absolute positions and velocities of each spacecraft are unique, so that correlations which make estimates using only local information suboptimal only occur through common biases and process noise. Covariance and monte-carlo analysis of a simplified system show that this lack of correlation may allow simplification of the local estimators while preserving the global optimality of the maneuvers commanded by the supervisors.

Carpenter, J. Russell↗
NASA NTRS2004

Non-GPS Geolocation for Space and Terrestrial Applications

Some near and far term space missions involve formation flying, which requires that the positions of multiple spacecraft be accurately known relative to a hub spacecraft. Many such missions will be located far outside the radius of the GPS constellation. So in such missions it will not be possible to derive position knowledge through the capabilities afforded by the GPS service. Consequently, in such missions, it is necessary to determine relative positions by other means. Depending on how well a position must be known, thus far it has appeared necessary to use means other than RF ranging, due to technical limitations. Once spacecraft have been crudely positioned using RF ranging, other tools such as star trackers, ccd cameras, and laser ranging are to be used for precise and accurate ranging. NASA Glenn is investigating an innovation in RF ranging that could be very useful for extending the capabilities of RF ranging in many circumstances. Currently, this innovation is a technical secret, but this paper will discuss the possibility of using RF triangulation for the purposes stated in its title, without disclosing any proprietary information. This paper includes a simulation that successfully illustrates how this technology could be used to perform vehicle tracking.

Robinson, Daryl C.↗
NASA NTRS2008

Generating Safety-Critical PLC Code From a High-Level Application Software Specification

The benefits of automatic-application code generation are widely accepted within the software engineering community. These benefits include raised abstraction level of application programming, shorter product development time, lower maintenance costs, and increased code quality and consistency. Surprisingly, code generation concepts have not yet found wide acceptance and use in the field of programmable logic controller (PLC) software development. Software engineers at Kennedy Space Center recognized the need for PLC code generation while developing the new ground checkout and launch processing system, called the Launch Control System (LCS). Engineers developed a process and a prototype software tool that automatically translates a high-level representation or specification of application software into ladder logic that executes on a PLC. All the computer hardware in the LCS is planned to be commercial off the shelf (COTS), including industrial controllers or PLCs that are connected to the sensors and end items out in the field. Most of the software in LCS is also planned to be COTS, with only small adapter software modules that must be developed in order to interface between the various COTS software products. A domain-specific language (DSL) is a programming language designed to perform tasks and to solve problems in a particular domain, such as ground processing of launch vehicles. The LCS engineers created a DSL for developing test sequences of ground checkout and launch operations of future launch vehicle and spacecraft elements, and they are developing a tabular specification format that uses the DSL keywords and functions familiar to the ground and flight system users. The tabular specification format, or tabular spec, allows most ground and flight system users to document how the application software is intended to function and requires little or no software programming knowledge or experience. A small sample from a prototype tabular spec application is shown.

Source record↗
NASA NTRS2006

Program for Editing Spacecraft Command Sequences

Sequence Translator, Editor, and Expander Resource (STEER) is a computer program that facilitates construction of sequences and blocks of sequences (hereafter denoted generally as sequence products) for commanding a spacecraft. STEER also provides mechanisms for translating among various sequence product types and quickly expanding activities of a given sequence in chronological order for review and analysis of the sequence. To date, construction of sequence products has generally been done by use of such clumsy mechanisms as text-editor programs, translating among sequence product types has been challenging, and expanding sequences to time-ordered lists has involved arduous processes of converting sequence products to "real" sequences and running them through Class-A software (defined, loosely, as flight and ground software critical to a spacecraft mission). Also, heretofore, generating sequence products in standard formats has been troublesome because precise formatting and syntax are required. STEER alleviates these issues by providing a graphical user interface containing intuitive fields in which the user can enter the necessary information. The STEER expansion function provides a "quick and dirty" means of seeing how a sequence and sequence block would expand into a chronological list, without need to use of Class-A software.

Gladden, Roy↗
NASA NTRS2011

Solar Magnetism eXplorer (Solme X)

The magnetic field plays a pivotal role in many fields of Astrophysics. This is especially true for the physics of the solar atmosphere. Measuring the magnetic field in the upper solar atmosphere is crucial to understand the nature of the underlying physical processes that drive the violent dynamics of the solar corona-that can also affect life on Earth. SolmeX, a fully equipped solar space observatory for remote-sensing observations, will provide the first comprehensive measurements of the strength and direction of the magnetic field in the upper solar atmosphere. The mission consists of two spacecraft, one carrying the instruments, and another one in formation flight at a distance of about 200 m carrying the occulter to provide an artificial total solar eclipse. This will ensure high-quality coronagraphic observations above the solar limb. SolmeX integrates two spectro-polarimetric coronagraphs for off-limb observations, one in the EUV and one in the IR, and three instruments for observations on the disk. The latter comprises one imaging polarimeter in the EUV for coronal studies, a spectro-polarimeter in the EUV to investigate the low corona, and an imaging spectro-polarimeter in the UV for chromospheric studies. SOHO and other existing missions have investigated the emission of the upper atmosphere in detail (not considering polarization), and as this will be the case also for missions planned for the near future. Therefore it is timely that SolmeX provides the final piece of the observational quest by measuring the magnetic field in the upper atmosphere through polarimetric observations

Magnetic Fields↗
NASA NTRS2016

Spacecraft Fire Safety Research at NASA Glenn Research Center

Appropriate design of fire detection systems requires knowledge of both the expected fire signature and the background aerosol levels. Terrestrial fire detection systems have been developed based on extensive study of terrestrial fires. Unfortunately there is no corresponding data set for spacecraft fires and consequently the fire detectors in current spacecraft were developed based upon terrestrial designs. In low gravity, buoyant flow is negligible which causes particles to concentrate at the smoke source, increasing their residence time, and increasing the transport time to smoke detectors. Microgravity fires have significantly different structure than those in 1-g which can change the formation history of the smoke particles. Finally the materials used in spacecraft are different from typical terrestrial environments where smoke properties have been evaluated. It is critically important to detect a fire in its early phase before a flame is established, given the fixed volume of air on any spacecraft. Consequently, the primary target for spacecraft fire detection is pyrolysis products rather than soot. Experimental investigations have been performed at three different NASA facilities which characterize smoke aerosols from overheating common spacecraft materials. The earliest effort consists of aerosol measurements in low gravity, called the Smoke Aerosol Measurement Experiment (SAME), and subsequent ground-based testing of SAME smoke in 55-gallon drums with an aerosol reference instrument. Another set of experiments were performed at NASAs Johnson Space Center White Sands Test Facility (WSTF), with additional fuels and an alternate smoke production method. Measurements of these smoke products include mass and number concentration, and a thermal precipitator was designed for this investigation to capture particles for microscopic analysis. The final experiments presented are from NASAs Gases and Aerosols from Smoldering Polymers (GASP) Laboratory, with selected results focusing on realistic fuel preparations and heating profiles with regards to early detection of smoke. SAFFIRE is the upcoming large-scale fire experiment which will be executed in a Cygnus vehicle after it undocks from the ISS.

Aerosol↗
NASA NTRSDate not supplied

Results of the Preliminary Analyses of Asteroid Ryugu Regolith Samples Returned by the Hayabusa2 Mission

The Hayabusa2 spacecraft returned 5.5g of regolith material from asteroid 162173 Ryugu in December 2021. The samples were maintained in near-vacuum conditions up to and even during many analyses, a factor that was critical for comparisons of Ryugu lithologies to meteorites because of ubiquitous terrestrial alteration of the latter. Observations of asteroid Ryugu by the Hayabusa2 spacecraft found that it is spinning, top-shaped rubble pile, formed from re-accretion of a (probably) small subset of fragments from a disrupted parent asteroid. Samples retrieved from Ryugu by the spacecraft during two brief touchdowns were expected to contain a record of this history, including the formation and early evolution of the parent body, its subsequent impact destruction and partial re-accretion, and later space weathering. The composition of Ryugu was expected to be similar to that of naturally-heated Ivuna-type carbonaceous chondrite meteorites (CI chondrites), based on ground- and spacecraft-based spectroscopy. Six preliminary examination teams investigated the formation history of Ryugu through laboratory analysis of the returned samples over the past 18 months. Specifically, we sought to determine (1) when and where in the Solar System the parent asteroid of Ryugu formed; (2) the original mineralogy, bulk elemental abundances, and chemical compositions of the accreted materials; (3) how these materials evolved through chemical and physical processing of the parent asteroid; and (4) how the parent asteroid was disrupted during impact and reaccumulated into Ryugu. This brief report mainly summarizes results from the mineralogy and petrology subteams, although results of the composition and isotope subteams are also mentioned. To address these issues, we analyzed numerous Ryugu particles up to ~8 mm in size.

Michael Zolensky↗