Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Lattice Thermal Conductivity from Atomistic Simulations: ZrB2 and HfB2

Ultra high temperature ceramics (UHTC) including ZrB2 and HfB2 have a number of properties that make them attractive for applications in extreme environments. One such property is their high thermal conductivity. Computational modeling of these materials will facilitate understanding of fundamental mechanisms, elucidate structure-property relationships, and ultimately accelerate the materials design cycle. Progress in computational modeling of UHTCs however has been limited in part due to the absence of suitable interatomic potentials. Recently, we developed Tersoff style parameterizations of such potentials for both ZrB2 and HfB2 appropriate for atomistic simulations. As an application, Green-Kubo molecular dynamics simulations were performed to evaluate the lattice thermal conductivity for single crystals of ZrB2 and HfB2. The atomic mass difference in these binary compounds leads to oscillations in the time correlation function of the heat current, in contrast to the more typical monotonic decay seen in monoatomic materials such as Silicon, for example. Results at room temperature and at elevated temperatures will be reported.

Lawson, John W.↗
NASA NTRS2012

Lattice Thermal Conductivity of Ultra High Temperature Ceramics (UHTC) ZrB2 and HfB2 from Atomistic Simulations

Ultra high temperature ceramics (UHTC) including ZrB2 and HfB2 have a number of properties that make them attractive for applications in extreme environments. One such property is their high thermal conductivity. Computational modeling of these materials will facilitate understanding of fundamental mechanisms, elucidate structure-property relationships, and ultimately accelerate the materials design cycle. Progress in computational modeling of UHTCs however has been limited in part due to the absence of suitable interatomic potentials. Recently, we developed Tersoff style parameterizations of such potentials for both ZrB2 and HfB2 appropriate for atomistic simulations. As an application, Green-Kubo molecular dynamics simulations were performed to evaluate the lattice thermal conductivity for single crystals of ZrB2 and HfB2. The atomic mass difference in these binary compounds leads to oscillations in the time correlation function of the heat current, in contrast to the more typical monotonic decay seen in monoatomic materials such as Silicon, for example. Results at room temperature and at elevated temperatures will be reported.

Lawson, John W.↗
DOE OSTI2024

Data Generation for Machine Learning Interatomic Potentials and Beyond

The field of data-driven chemistry is undergoing an evolution, driven by innovations in machine learning models for predicting molecular properties and behavior. Recent strides in ML-based interatomic potentials have paved the way for accurate modeling of diverse chemical and structural properties at the atomic level. The key determinant defining MLIP reliability remains the quality of the training data. A paramount challenge lies in constructing training sets that capture specific domains in the vast chemical and structural space. This Review navigates the intricate landscape of essential components and integrity of training data that ensure the extensibility and transferability of the resulting models. We delve into the details of active learning, discussing its various facets and implementations. We outline different types of uncertainty quantification applied to atomistic data acquisition and the correlations between estimated uncertainty and true error. The role of atomistic data samplers in generating diverse and informative structures is highlighted. Furthermore, we discuss data acquisition via modified and surrogate potential energy surfaces as an innovative approach to diversify training data. The Review also provides a list of publicly available data sets that cover essential domains of chemical space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ternary Phosphides Ba M 2 P 2 : Tailoring Crystal and Electronic Structures Enables Highly Efficient HER Electrocatalysis

Binary transition metal phosphides and their solid solutions have emerged as promising hydrogen evolution reaction (HER) catalysts. Although many research endeavors have adopted strategies to vary compositions to optimize catalytic performance, they mainly focus on binary structures, which represent only a small fraction of the abundant phase space of structure types among transition metal phosphides. Here, the largely unexplored class of ternary and multinary ordered phosphides in catalysis comprises two or more metals with quite different chemical nature, concealing the structure–property relationships essential for advancing catalyst design. Here, we explored phosphides crystallizing in one of the most abundant ordered intermetallic structure types, —the ThCr 2 Si 2 type, —where square nets of 3d transition metal M and P atoms are separated by layers of electropositive Ba cations. Four ternary BaM 2 P 2 (M = Fe, Fe/Cu, Fe/Ni, Ni) catalysts were synthesized and characterized. BaNi 2 P 2 showed high HER activity in acidic electrolyte, which required an overpotential, η 10 , of only 62 mV to drive current density j = –10 mA/cm 2 and high stability with a potential drop rate of 0.25 mV/h. BaNi 2 P 2 outperformed other Ni-based catalysts, such as Ni 2 P and Ni 5 P 4 . Notably, at current densities above –170 mA/cm 2 , BaNi 2 P 2 outperformed the standard Pt electrode measured under identical conditions. Electronic structure analysis revealed a volcano-type activity trend among the four BaM 2 P 2 catalysts based on their d-band center positions, highlighting the role of electropositive Ba cations in shifting the Ni-3d orbitals into an optimal position.

BaNi2P2↗
NASA NTRS1985

Structural dynamics analysis

Dynamic analysis of large space antenna systems must treat the deployment as well as vibration and control of the deployed antenna. Candidate computer programs for deployment dynamics, and issues and needs for future program developments are reviewed. Some results for mast and hoop deployment are also presented. Modeling of complex antenna geometry with conventional finite element methods and with repetitive exact elements is considered. Analytical comparisons with experimental results for a 15 meter hoop/column antenna revealed the importance of accurate structural properties including nonlinear joints. Slackening of cables in this antenna is also a consideration. The technology of designing actively damped structures through analytical optimization is discussed and results are presented.

Housner, J. M.↗
NASA NTRS1992

Flow behavior in liquid molding

The liquid molding (LM) process for manufacturing polymer composites with structural properties has the potential to significantly lower fabrication costs and increase production rates. LM includes both resin transfer molding and structural reaction injection molding. To achieve this potential, however, the underlying science base must be improved to facilitate effective process optimization and implementation of on-line process control. The National Institute of Standards and Technology (NIST) has a major program in LM that includes materials characterization, process simulation models, on-line process monitoring and control, and the fabrication of test specimens. The results of this program are applied to real parts through cooperative projects with industry. The key feature in the effort is a comprehensive and integrated approach to the processing science aspects of LM. This paper briefly outlines the NIST program and uses several examples to illustrate the work.

Hunston, D.↗
NASA NTRS1995

Validation of Long Bone Mechanical Properties from Densitometry

The objective of this study was to assess whether cross-sectional areal properties, calculated from densitometry, correlate to the true flexural properties. Right and left male embalmed tibiae were used in the study. Prior to scanning, the proximal end of each tibia was potted in a fixture with registration pins, flushed thoroughly with water under pressure to remove trapped air, and then placed in a constant thickness water bath attached to a precision indexer. Two sets of three scans of the entire tibia were taken with an Hologic QDR 1000/W densitometer at rotations of 0, 45, and 90 degrees about the tibia long axis. An aluminum step phantom and a bone step phantom, machined from bovine cortical bone, were also in the bath and scanned separately. Pixel attenuation data from the two sets of scans were averaged to reduce noise. Pixel data from the high energy beam were then converted to equivalent thicknesses using calibration equations. Cross-sectional areal properties (centroid, principal area moments and principal angle) along the length were computed from the three registered scans using methods developed in our laboratory. Flexural rigidities. Four strain gages were bonded around the circumference of each of 5 cross-sections encompassing the entire diaphysis. A known transverse load was then applied to the distal end and the bone was rotated 360 degrees in eight increments of 45 degrees each. Strains from the eight orientations were analyzed along with the known applied bending moments at each section to compute section centroids, curvatures, principal flexural rigidities and principal angle. Reference axes between the two methods were maintained within +/- 0.5 degrees using an electronic inclinometer. Principal angles (flexural - areal) differed by -2.0 +/- 4.0 degrees, and 1.0 +/- 2.5 degrees for the right and left tibia, respectively. Section principal flexural rigidities were highly correlated to principal areal moments (right: r(sup 2)= 0.997; left: r(sup 2)= 0.978) indicating a nearly constant effective flexural modulus. Right and left tibia exhibited a very high degree of symmetry when comparing either flexural or areal properties. To our knowledge this is the first study to validate the use of densitometry (DXA) to predict three dimensional structural properties of long bones. Our initial results support the conclusion that bone mineral and its distribution are the primary determinants of flexural modulus and rigidity.

Whalen, R.↗
DOE OSTI2025

Understanding the Active Site Structures and Achieving Catalytic Activity Tuning of Atomically Dispersed FeN 4 Sites for Oxygen Reduction Reaction

Atomically dispersed Fe–—N—C catalysts with high oxygen reduction reaction (ORR) activity have attracted great attention since the last decade. Due to comparable ORR activity and low material cost, they are promising platinum group metal (PGM)-free catalysts that can replace the commercialized Pt/C materials; furthermore, it can facilitate the efficiency of the fuel cell technologies and mitigate dependence on fossil fuels. Great advancements have been made to experimentally optimize the synthesis approach of the Fe–—N—C catalysts, enhance the ORR activity, and improve the catalyst stability. Similarly, recent theoretical studies also provide enriched understanding of the active site structures, properties, and reaction mechanisms. In this review, discussions are made upon utilizing combined experimental and computational spectroscopy to reveal the active site structures, employing mechanistic studies to investigate reaction thermodynamics and kinetics, as well as developing scaling relationships to assist the design and development of future PGM-free catalyst materials. Furthermore, recent advances in studying Fe–—N—C catalysts utilizing electrified surface models and explicit solvation models are also discussed. Not only can these aspects improve the accuracy of theoretical simulation and predictions but also deepen the understanding of the catalyst properties and reaction mechanisms under the effect of surface charges and solvent molecules.

Fe single-atom catalysts↗
DOE OSTI2026

The Influence of Shielding Gas on the Wire-Arc Additive Manufacturing (WAAM) of Ni-Based Superalloy Haynes 282

Wire-arc additive manufacturing (WAAM) enables building large near-net-shaped parts using fast deposition rates and is attractive due to the potential cost and schedule savings. Haynes® 282® is a Ni-based superalloy with wide application in advanced power generation systems for its superior high temperature mechanical properties. High-quality WAAM H282 parts are achieved through careful process optimization, hence, we have focused on systematically characterizing the processing-structure-properties relationships over a wide range of wire-feed and travel speeds using a standard Ar30He shielding gas. Here the influence of adding 0.25-3% of H2 and CO2 to Ar-30He standard on our findings is examined. Multi-bead tracks were used to screen 20+ gas combinations to examine impact on wettability, porosity, oxidation, and grain structures. Improved multi-tracks are observed for gases with up to 1% H2 and 0.25% CO2. WAAM H282 builds within this range are examined to reveal differences in microstructure as evaluated with CT, SEM-EDS, and EBSD.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Stereochemically‐Controlled Fluorinated Copolymers for Selectively Permeable Barrier Applications

Selective oxygen permeability coupled with low water vapor transmission is essential for biomedical and packaging applications requiring controlled oxygen flux under humid conditions. However, most high‐performance barrier polymers depend on perfluoroalkyl substances (PFAS), whose persistence and regulatory restrictions limit their long‐term applicability. We designed a series of stereocontrolled thiol‐yne‐based polyesters, including both fluorinated and non‐fluorinated variants, for selective oxygen permeability with considerable water barrier performance. Tailoring polymer crystallinity and morphology tuned both oxygen transport and mechanical properties. Fluorinated polymers demonstrated enhanced hydrophobicity and water resistance while maintaining oxygen diffusivity within a range relevant to oxygen‐sensing applications. Structure–property relationships were elucidated through small‐ and wide‐angle X‐ray scattering, revealing semi‐crystalline domains influenced by fluorine content and dithiol chain length. Barrier performance was rigorously evaluated via water vapor transmission rate and dynamic vapor sorption, showing reduced water uptake with increasing dithiol monomer length and crystallinity. In conclusion, this work introduces a PFAS‐free alternative to conventional barrier materials and establishes a tunable materials platform with potential relevance for biomedical devices and packaging systems requiring controlled oxygen permeability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Machine Learning‐Guided Discovery of High‐Entropy Perovskite Oxide Electrocatalysts via Oxygen Vacancy Engineering

Abstract High‐entropy perovskite oxides (HEPOs) have recently emerged as multifunctional catalysts. However, the HEPOs’ structural and compositional complexity hinders the easy and accurate extrapolation of activity indicators, which are essential for establishing structure‐property correlations. Here, OxiGraphX, is introduced as a novel graph neural network (GNN) model designed to capture the complex relationships among structure, composition, and atomic chemical environments for accurate prediction of oxygen vacancy formation energies (OVFEs) in HEPOs. By integrating machine learning (ML), density functional theory (DFT), and experimental validation, this work demonstrates an efficient framework for rapidly and accurately screening HEPO electrocatalysts for oxygen evolution reaction (OER). The OxiGraphX predicts OVFEs with a precision exceeding existing data, enabling the identification of compositions of higher oxygen vacancy content (OVC) and, thus, higher catalytic activity. Furthermore, the model explores latent spaces that translate effectively into experimental domains, bridging computational predictions with real‐world applications. This approach accelerates the discovery of high‐performance HEPO catalysts while providing deeper insights into their catalytic mechanisms.

Chemistry↗
DOE OSTI2024

Unconventional pressure-induced magnetic transitions and mechanical properties in non-magnetic LaFeSi

Here, this work demonstrates that two consecutive magnetic transitions occur in non-magnetic LaFeSi compound under negative hydrostatic pressure (small volume expansion). Electronic structure properties of LaFeSi were calculated using density functional theory (DFT) to understand the origin of these magnetic transitions. Mechanical properties of LaFeSi, especially elastic properties (shear and Young’s modulus, and Poisson’s ratio), were determined by DFT distortion calculations to elucidate lattice anisotropy and stability. The antiferromagnetic transition at –7.52 GPa, predicted in our work for LaFeSi, is consistent with the reported experimentally observed antiferromagnetic ground states in CeMnSi and LaMnSi compounds having similar crystal geometry. This finding of unexpected magnetic ordering predicts that layered non-magnetic materials, like LaFeSi, may become magnetically active with lattice expansion.

36 MATERIALS SCIENCE↗
NASA NTRS1979

An Assessment of the Risks Presented by the Use of Carbon Fiber Composites in Commercial Aviation. Volume 1: Final Report. Volume 2: Supporting Appendices

Carbon fiber (CF) composites are being used to an increasing extent in commercial aircraft, due to their excellent structural properties. Since carbon fibers are highly conductive, a potential risk was identified in the event that an aircraft with CF composite structures is involved in an accidental fire. If carbon fibers are released from the fire, they could disperse in the atmosphere and eventually cause damaging short circuits in electronic equipment at remote locations. This phenomenon could conceivably result in economic losses. The purpose of this study was to assess the risks presented to the nation as a whole by the use of CF composites in commercial aircraft, in terms of the potential economic losses from air carrier accidents.

Kalelkar, A. S.↗
DOE OSTI2025

Coupling between collective modes in the deformed 98 Zr nucleus: Insights from consistent HFB + QRPA calculations with the Gogny interaction

The zirconium isotopes exhibit structural properties that present multiple challenges to nuclear theory. Investigations of the coupling present within isoscalar modes and within isovector modes are scarce but important for advancing our understanding of the microscopic picture of nuclei. To explore some of these underlying coupling features, and to test the predictive power of a state-of-the-art nuclear structure approach, we provide a detailed analysis of the properties of 90,96,98 Zr . This region includes a benchmarking case and offers insights into nuclear deformation phenomena. Here, to investigate the coupling between collective modes in deformed nuclei, we focused our analysis on the ground and excited-state properties of these isotopes, employing a consistent approach with the axially symmetric deformed Hartree-Fock-Bogoliubov (HFB) and the quasiparticle random phase approximation (QRPA) framework, both using the Gogny D1M force. This approach effectively describes both low-lying and giant-resonance states. We devoted special attention to the deformed 98 Zr nucleus, where we confirm the existence of coupling between monopole and quadrupole excitations through the 𝐾 𝜋 = 0 + QRPA components and demonstrate an analogous dipole-octupole coupling through the 𝐾 𝜋 = 0 − and 𝐾 𝜋 = 1 − components. Intrinsic transition densities and associated radial projections illustrate the coupling. Our work complements and extends earlier studies carried out using density-functional-based methods and notably, we included the complete Coulomb interaction also in the pairing fields, i.e., we treat terms exactly that are approximated in typical calculations that use the Gogny D1 and D2 interaction families.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Irradiation-Induced Structural Disorder and Its Influence on the Mechanical Response of Polycrystalline MoS2

Molybdenum disulfide (MoS2) thin films are widely used as dry-film lubricants and protective coatings in aerospace and other radiation-exposed environments. Conventional synthesis routes produce polycrystalline films whose grain boundaries and other native defects cause their mechanical and tribological behavior to differ substantially from that of ideal single crystals. Under irradiation, these films progressively evolve from polycrystalline structures, composed of layered MoS2 grains, into highly disordered and eventually amorphous structures, altering both their tribological performance and mechanical integrity. Here, we employ reactive atomistic simulations to investigate irradiation-driven structural evolution in bulk polycrystalline MoS2. Using controlled primary knock-on atom (PKA) events, we characterize the progressive transition from a polycrystalline microstructure to an amorphous network by tracking defect accumulation and structural disorder. We then establish how this transition modifies the dominant deformation mechanisms and the temperature-dependent tensile response. Specifically, irradiation suppresses interlayer sliding and delamination, mechanisms which facilitate the deformation of the pristine polycrystal, resulting in defect-induced hardening. Broadly, our results establish direct process–structure–property relationships linking irradiation-induced defect accumulation, microstructural evolution, deformation mechanisms, and mechanical behavior, providing an atomistic framework for understanding the structural integrity and long-term reliability of irradiated MoS2 coatings.

Moore, Daniel [Sandia National Laboratories (SNL)]↗
DOE OSTI2025

Review of Layered Transition Metal Oxide Materials for Cathodes in Sodium-Ion Batteries

The growing interest in sodium-ion batteries (SIBs) is driven by scarcity and the rising costs of lithium, coupled with the urgent need for scalable and sustainable energy storage solutions. Among various cathode materials, layered transition metal oxides have emerged as promising candidates due to their structural similarity to lithium-ion battery (LIB) counterparts and their potential to deliver high energy density at reduced costs. However, significant challenges remain, including limited capacity at high charge/discharge rates and structural instability during extended cycling. Addressing these issues is critical for advancing SIB technology toward industrial applications, particularly for large-scale energy storage systems. This review provides a comprehensive analysis of layered sodium transition metal oxides, focusing on their structural properties, electrochemical performance, and degradation mechanisms. Special attention is given to the intrinsic and extrinsic factors contributing to their instability, such as structural phase transitions, and cationic/anionic redox behavior. Additionally, recent advancements in material design strategies, including doping, surface modifications, and composite formation, are discussed to highlight the progress toward enhancing the stability and performance of these materials. This work aims to bridge the knowledge gaps and inspire further innovations in the development of high-performance cathodes for sodium-ion batteries.

Ahangari, Mehdi (ORCID:0000000345803969)↗
NASA NTRS2015

Targeted Structural Optimization with Additive Manufacturing of Metals

The recent advances in additive manufacturing (AM) of metals have now improved the state-of-the-art such that traditionally non-producible parts can be readily produced in a cost-effective way. Because of these advances in manufacturing technology, structural optimization techniques are well positioned to supplement and advance this new technology. The goal of this project is to develop a structural design, analysis, and optimization framework combined with AM to significantly light-weight the interior of metallic structures while maintaining the selected structural properties of the original solid. This is a new state-of-the-art capability to significantly reduce mass, while maintaining the structural integrity of the original design, something that can only be done with AM. In addition, this framework will couple the design, analysis, and fabrication process, meaning that what has been designed directly represents the produced part, thus closing the loop on the design cycle and removing human iteration between design and fabrication. This fundamental concept has applications from light-weighting launch vehicle components to in situ resource fabrication.

Burt, Adam↗