Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural vibrations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Phase Transitions in Natural Vanadinite at High Pressures

The structural stability of vanadinite, Pb 5 [VO 4 ] 3 Cl, is reported by high-pressure experiments using synchrotron radiation X-ray diffraction (XRD) and Raman spectroscopy. XRD experiments were performed up to 44.6 GPa and 700 K using an externally-heated diamond anvil cell (EHDAC), and Raman spectroscopy measurements were performed up to 26.8 GPa at room temperature. XRD experiments revealed a reversible phase transition of vanadinite at 23 GPa and 600 K, which is accompanied by a discontinuous volume reduction and color change of the mineral from transparent to reddish during compression. The high-pressure Raman spectra of vanadinite show apparent changes between 18.0 and 22.8 GPa and finally become amorphous at 26.8 GPa, suggesting structural transitions of this mineral upon compression. The structural changes can be distinguished by the emergence of a new vibrational mode that can be attributed to the distortion of [VO 4 ] and the larger distortion of the V–O bonds, respectively. The [VO 4 ] internal modes in vanadinite give isothermal mode Grüneisen parameters varying from 0.149 to 0.286, yielding an average VO 4 internal mode Grüneisen parameters of 0.202.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Synthetic Control of Exciton Dynamics in Bioinspired Cofacial Porphyrin Dimers

Understanding how the complex interplay among excitonic interactions, vibronic couplings, and reorganization energy determines coherence-enabled transport mechanisms is a grand challenge with both foundational implications and potential payoffs for energy science. We use a combined experimental and theoretical approach to show how a modest change in structure may be used to modify the exciton delocalization, tune electronic and vibrational coherences, and alter the mechanism of exciton transfer in covalently linked cofacial Zn-porphyrin dimers (meso-beta linked AB m-β and meso-meso linked AA m-m ). While both AB m-β and AA m-m feature zinc porphyrins linked by a 1,2-phenylene bridge, differences in the interporphyrin connectivity set the lateral shift between macrocycles, reducing electronic coupling in AB m-β and resulting in a localized exciton. Pump-probe experiments show that the exciton dynamics is faster by almost an order of magnitude in the strongly coupled AA m-m dimer, and two-dimensional electronic spectroscopy (2DES) identifies a vibronic coherence that is absent in AB m-β . Theoretical studies indicate how the interchromophore interactions in these structures, and their system-bath couplings, influence excitonic delocalization and vibronic coherence-enabled rapid exciton transport dynamics. Real-time path integral calculations reproduce the exciton transfer kinetics observed experimentally and find that the linking-modulated exciton delocalization strongly enhances the contribution of vibronic coherences to the exciton transfer mechanism, and that this coherence accelerates the exciton transfer dynamics. These benchmark molecular design, 2DES, and theoretical studies provide a foundation for directed explorations of nonclassical effects on exciton dynamics in multiporphyrin assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unraveling the Heterogeneous but Ordered Microstructure of the Nonionic Deep Eutectic Solvent Formed by Lauric Acid and N -Methylacetamide

The nonionic deep eutectic solvent, formed by lauric acid (LA) and N-methylacetamide (NMA), has been shown to have a heterogeneous molecular structure in which the LA and NMA form nonpolar and polar domains, respectively. Previous vibrational spectroscopy experiments demonstrated that the ability of the LA domains to solvate compounds was limited to long carbon chains, whereas other nonpolar molecules, such as W(CO) 6 , were found to be solvated by both LA and NMA. These experiments were not fully compatible with the previously proposed micelle-like structure of the nonpolar domains of the LA-NMA DES. In this work, the modeling of the DES molecular structure is pursued using classical molecular dynamics simulations. The new classical model reproduces both the SAXS structural factors and the previously experimentally derived interaction map for these LA-NMA DESs. In addition, the simulation also shows that LA-NMA DESs form highly organized LA aggregates that are difficult to disorganize. Further evidence of the correct description provided by the newly derived model is obtained using a moderately polar probe: chloroform-d. Computations using the classical model have a good agreement with the solvation behavior of the probe derived from experiments, in which the location of the probe is found to be mostly within the polar domain of the DES. The computational model also demonstrates that the probe solvation is a consequence of the tightly packed LA structure, which causes nonpolar molecules to be located at the interphase of the DES nonpolar domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing atom dynamics of excited Co-Mo-S nanocrystals in 3D

Advances in electron microscopy have enabled visualizations of the three-dimensional (3D) atom arrangements in nano-scale objects. The observations are, however, prone to electron-beam-induced object alterations, so tracking of single atoms in space and time becomes key to unravel inherent structures and properties. Here, we introduce an analytical approach to quantitatively account for atom dynamics in 3D atomic-resolution imaging. The approach is showcased for a Co-Mo-S nanocrystal by analysis of time-resolved in-line holograms achieving ~1.5 Å resolution in 3D. The analysis reveals a decay of phase image contrast towards the nanocrystal edges and meta-stable edge motifs with crystallographic dependence. These findings are explained by beam-stimulated vibrations that exceed Debye-Waller factors and cause chemical transformations at catalytically relevant edges. This ability to simultaneously probe atom vibrations and displacements enables a recovery of the pristine Co-Mo-S structure and establishes, in turn, a foundation to understand heterogeneous chemical functionality of nanostructures, surfaces and molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structure and properties of densified silica glass: characterizing the order within disorder

The broken symmetry in the atomic-scale ordering of glassy versus crystalline solids leads to a daunting challenge to provide suitable metrics for describing the order within disorder, especially on length scales beyond the nearest neighbor that are characterized by rich structural complexity. Here, we address this challenge for silica, a canonical network-forming glass, by using hot versus cold compression to (i) systematically increase the structural ordering after densification and (ii) prepare two glasses with the same high-density but contrasting structures. The structure was measured by high-energy X-ray and neutron diffraction, and atomistic models were generated that reproduce the experimental results. The vibrational and thermodynamic properties of the glasses were probed by using inelastic neutron scattering and calorimetry, respectively. Traditional measures of amorphous structures show relatively subtle changes upon compacting the glass. The method of persistent homology identifies, however, distinct features in the network topology that change as the initially open structure of the glass is collapsed. The results for the same high-density glasses show that the nature of structural disorder does impact the heat capacity and boson peak in the low-frequency dynamical spectra. Densification is discussed in terms of the loss of locally favored tetrahedral structures comprising oxygen-decorated SiSi 4<:sub> tetrahedra.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Correlated anharmonicity and dynamic disorder control carrier transport in halide perovskites

Halide pervoskites are an important class of semiconducting materials that hold great promise for optoelectronic applications. In this work we investigate the relationship between vibrational anharmonicity and dynamic disorder in this class of solids. Via a multiscale model parametrized from first-principles calculations, we demonstrate that the non-Gaussian lattice motion in halide perovskites is microscopically connected to the dynamic disorder of overlap fluctuations among electronic states. This connection allows us to rationalize the emergent differences in temperature-dependent mobilities of prototypical MAPbI 3 and MAPbBr 3 compounds across structural phase transitions, in agreement with experimental findings. In conclusion, our analysis suggests that the details of vibrational anharmonicity and dynamic disorder can complement known predictors of electronic conductivity and can provide structure-property guidelines for the tuning of carrier transport characteristics in anharmonic semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Phonons and phase symmetries in bulk CrCl 3 from scattering measurements and theory

Phonon-derived behaviors are important indicators of novel phenomena in transition metal trihalides, including spin liquid behavior, two-dimensional magnetism, and spin-lattice coupling. However, phonons and their dependence on spin structure and excitations have not been adequately explored. In this work, we probe and critically examine the vibrational properties of the prototype ferromagnetic honeycomb lattice material CrCl 3 using inelastic neutron scattering and density functional theory. We demonstrate that magnetic and van der Waals interactions are essential to describing the structure and phonons in CrCl 3 ; however, the specific spin configuration is unimportant. Further, this provides context for understanding thermal transport measurements as governed by dynamical spin-lattice couplings. More importantly, we introduce an efficient dynamic method that exploits translational symmetries in large conventional unit cells that generates insights into phonon dispersions, interactions, and measured spectra in terms of quantum phase interference conditions. This work opens new avenues for understanding phonons in layered magnets and more generally in conventional cell geometries of a variety of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hybrid Double Perovskite Containing Helium: [He 2 ][CaZr]F 6

Perovskites are of great technological and geological importance, in large part, due to their considerable compositional and structural flexibility. However, the formation of perovskites with neutral species on their A-sites is very unusual. The formation, phase transitions and properties of [He 2 ][CaZr]F 6 , which is the first noble gas containing perovskite to be made, are reported. It is likely that a large family of related materials can also be prepared. On compression in neon, the negative thermal expansion (NTE) material CaZrF 6 amorphizes at ~ 0. 5 GPa. However, on compression in helium at room temperature, gas is inserted into the structure to form a perovskite with helium on the A-site. This suppresses the amorphization until > 3 GPa. Volume versus pressure and Raman measurements suggest that filling of the A-site, to give [He 2 ][CaZr]F 6 , is complete at > 1 GPa. The presence of helium on the A-site in this perovskite leads to a reduction in the magnitude of negative thermal expansion when compared to the parent phase CaZrF 6 , likely due to steric impediment of the transverse vibrational motion of fluoride. The helium also leads to considerable stiffening of the structure. At room temperature and ~2.5 GPa, the helium containing hybrid perovskite has a bulk modulus of ~ 47 GPa, whereas CaZrF 6 has a bulk modulus of ~ 40 GPa at ambient. At 15 K, the cubic perovskite [He 2 ][CaZr]F 6 undergoes a structural phase transition, that likely involves a cooperative tilting of framework octahedra to give a lower-symmetry phase, which is tentatively assigned as tetragonal.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Lattice Dynamics and Optoelectronic Properties of Vacancy-Ordered Double Perovskite Cs 2 TeX 6 (X = Cl – , Br – , I – ) Single Crystals

The soft, dynamic lattice of inorganic lead halide perovskite CsPbX 3 (X = Cl ⁻ , Br ⁻ , I ⁻ ) leads to the emergence of many interesting photophysical and optoelectronic phenomena. However, probing their lattice dynamics with vibrational spectroscopy remains challenging. The influence of the fundamental octahedral building block in the perovskite lattice can be better resolved in zero-dimensional (0D) vacancy-ordered double perovskites of form A 2 BX 6 . Here we study Cs 2 TeX 6 (X = Cl ⁻ , Br ⁻ , I ⁻ ) single crystals to yield detailed insight into the fundamental octahedral building block and to explore the effect that its isolation in the crystal structure has on structural and electronic properties. The isolated [TeX 6 ] 2- octahedral units serve as the vibrational, absorbing, and emitting centers within the crystal. Serving as the vibrational centers, the isolated octahedra inform the likelihood of a random distribution of 10 octahedral symmetries within the mixed-halide spaces, as well as the presence of strong exciton-phonon coupling and anharmonic lattice dynamics. Serving as the absorbing and emitting centers, the isolated octahedra exhibit compositionally tunable absorption (1.50-3.15 eV) and emission (1.31-2.11 eV) energies. Due to greater molecular orbital overlap between neighboring octahedra with increasing halide anion size, there is a transition from a more molecule-like electronic structure in Cs 2 TeCl 6 and Cs 2 TeBr 6 -as expected from the effective 0D nature of these single crystals-to a dispersive electronic structure in Cs 2 TeI 6 , typical of three-dimensional (3D) bulk single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A comprehensive review of nonlinear oscillators in hydrokinetic energy harnessing using flow-induced vibrations

A comprehensive review of hydrokinetic energy converters based on alternating lift technology (ALT) is provided. Emphasis is on nonlinear oscillators based on Flow Induced Vibration (FIV) or Oscillation (FIO). Due to strong coupling in Fluid-Structure Interaction (FSI), and in order to maximize the hydrokinetic harnessed energy, design of nonlinear oscillators and analysis by model tests or computational fluid dynamics dominates this area. Research confirmed that the nonlinear oscillator can harvest energy from a stochastic excitation modeled by a generic wide spectrum, and overcome the most severe oscillator limitations: specifically, the need for continuous frequency tuning due to the narrow bandwidth response, and low efficiency outside the narrow bandwidth oscillator response. This review covers the following aspects of nonlinear oscillators in ALT converters: (1) Geometric changes in oscillator cross-section; e.g., circular, square, rectangular, or trilateral shapes. (2) Passive turbulence control of FIV/FIO. (3) Position based nonlinear stiffness. (4) Multi-cylinder synergistic FIV/FIO. (5) Mechanically linked oscillators. (6) Velocity-based, nonlinear, adaptive harnessing damping.

42 ENGINEERING↗
DOE OSTI2026

Developing cathode infiltration processes for all-solid-state bilayer LLZO cells

To realize the bilayer architecture of lithium lanthanum zirconate (LLZO) for application in solid-state batteries (SSBs), the scaffold structure must be optimized, and effective cathode infiltration strategies must be established. In this study, we fabricate a modified bilayer LLZO using a sacrificial layer to enhance surface porosity, and systematically investigate various cathode infiltration techniques to fill the scaffold with oxide cathode active materials (CAM). Structural characterizations showed that the sacrificial layer significantly increased open surface porosity, enabling the surface of the scaffold to be filled with CAM. To further increase infiltration depth, applying vacuum or vibration was compared, with the full-depth infiltration achieved using a sonicator-based vibration. Full cells prepared using the modified bilayer LLZO and vibration-assisted technique demonstrated successful operation. This work demonstrates a practical and scalable approach for engineering bilayer LLZO structures and integrating oxide cathodes into porous scaffolds, offering a promising pathway toward high-performance solid-state batteries.

Bilayer↗
DOE OSTI2023

Thermally driven phase transitions in freestanding low-buckled silicene, germanene, and stanene

Low-buckled silicene, germanene, and stanene are group-IV graphene allotropes. They form a honeycomb lattice out of two interpenetrating (A and B) triangular sublattices that are vertically separated by a small distance Δ z . The atomic numbers Z of silicon, germanium, and tin are larger than that of carbon (Z C = 6), making them the first experimentally viable two-dimensional topological insulators. Those materials have a twice-energy-degenerate atomistic structure characterized by the buckling direction of the B sublattice with respect to the A sublattice [whereby the B atom either protrudes above (Δ z > 0) or below (Δ z < 0) the A atoms], and the consequences of that energy degeneracy on their elastic and electronic properties have not been reported thus far. Here, we uncover ferroelastic, bistable behavior on silicene, which turns into an average planar structure at about 600 K. Furthermore, the creation of electron and hole puddles obfuscates the zero-temperature spin-orbit coupling (SOC)-induced band gaps at temperatures as low as 200 K, which may discard silicene as a viable two-dimensional topological insulator for room-temperature applications. Germanene, on the other hand, never undergoes a low-buckled-to-planar two-dimensional transformation, becoming amorphous at around 675 K instead, and preserving its SOC-induced band gap despite band broadening. Stanene undergoes a transition onto a crystalline three-dimensional structure at about 300 K, preserving its SOC-induced electronic band gap up to that temperature. Unlike what is observed in silicene and germanene, stanene readily develops a higher-coordinated structure with a high degree of structural order. Furthermore, the structural phenomena are shown to have far-reaching consequences for the electronic and vibrational properties of those two-dimensional topological insulators.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Water-mediated ion transport in an anion exchange membrane

Water is a critical component in polyelectrolyte anion exchange membranes (AEMs). It plays a central role in ion transport in electrochemical systems. Gaining a better understanding of molecular transport and conductivity in AEMs has been challenged by the lack of a general methodology capable of capturing and connecting water dynamics, water structure, and ionic transport over time and length scales ranging from those associated with individual bond vibrations and molecular reorientations to those pertaining to macroscopic AEM performance. In this work, we use two-dimensional infrared spectroscopy and semiclassical simulations to examine how water molecules are arranged into successive solvation shells, and we explain how that structure influences the dynamics of bromide ion transport processes in polynorbornene-based materials. We find that the transition to the faster transport mechanism occurs when the reorientation of water molecules in the second solvation shell is fast, allowing a robust hydrogen bond network to form. Our findings provide molecular-level insights into AEMs with inherent transport of halide ions, and help pave the way towards a comprehensive understanding of hydroxide ion transport in AEMs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Fast Charge Induced Phase Evolution and Element Contribution of Nickel-Rich Layered Cathode for Lithium-Ion Batteries

In nickel-rich layered cathode materials, three transition metals (TM = Ni, Co and Mn) play critical roles in Li storage performance. However, rate-dependent phase evolution and elemental contribution of nickel-rich cathode materials are not well understood, but very important for further design and development of these cathodes in high-power applications. Here, the rate-dependent phase evolution and elemental contribution of LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) cathode are investigated thoroughly by using time-resolved synchrotron-based in situ X-ray diffraction and absorption techniques. The increase of Ni content in NMC532 has been found to be the main cause of the complex structural changes, resulting in distortion of TM-O 6 octahedron and strong static vibration between TM and O coordination. It is revealed that the fast charge (10C and 30C) of NMC532 leads to intermediate Li-poor phases, shrinking of H2 phase region, and prolonged O1 phase. During high-rate charging, Co is oxidized easily in low voltage region, while Ni mainly dominates charge compensation in high voltage region. It is found that delithiation-induced local structure distortion transfers from Ni to Co sites in fast kinetic process. In conclusion, these findings provide in-depth understanding for the fast charge behavior of Ni-rich layered cathode materials and help to guide further development of advanced high-power lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

LANL Test Engineering’s Structural Dynamics Research and Development Efforts [Slides]

LANL's priority roles are serving as a nuclear weapons design agency and a nuclear weapons production agency; addressing nuclear threats; and performing national security science, technology, and engineering. LANL’s Test Engineering organization serves the national mission of maintaining a strategic nuclear deterrent by providing high-quality, empirical evidence through the execution and assessment of weapons system and component testing. Shock and vibration environmental testing provides one key piece of evidence for evaluation and qualification of these systems and components in the service environments incurred during a lifetime in the stockpile. LANL’s Test Engineering group continuously pursues research and development in structural dynamics to improve shock and vibration testing capabilities, processes, and analysis techniques to increase the fidelity of service environment recreations in laboratory testing settings. This talk will highlight several ongoing projects to represent these R&D efforts.

42 ENGINEERING↗
DOE OSTI2022

Inelastic Neutron Scattering from Thin Film Biaxially Oriented Polyethylene Terephthalate

Recent interest in emerging processes for polymer manufacturing and bio-based chemistries for direct chemical recycling/upcycling has motivated new research focused on a deeper understanding of atomic-scale polymer properties and how they influence macroscopic phenomena. Uncovering the fundamental properties of polymers that give rise to macroscopic behavior could enable new pathways for improved recyclability or utilization of alternative “greener” polymer analogues. In this study, the neutron vibrational spectrum was measured for a film of biaxially oriented polyethylene terephthalate (BoPET) using inelastic neutron scattering (INS), to investigate the relationship between the structure and dynamics of a widely used polymer. Compared to conventional spectroscopic techniques, the use of INS is advantageous for polymeric materials due to the absence of selection rules (i.e., all transitions are allowed), broad-band energy range, and considerable sensitivity to hydrogen modes. In order to distinguish the vibrational modes caused by trans and gauche rotational isomerism, the normal modes of vibration were calculated from a density functional theory-optimized structure of crystalline PET (cPET), representative of the all-trans state, and compared with INS from “highly crystalline” PET powder. Although in- and out-of-plane wagging of hydrogens on the ring structure exhibit significant contribution to both BoPET and cPET spectra, the wagging, rocking, and twisting modes of hydrogen on the ethylene glycol group are, in most cases, conformation-specific. These results were further rationalized by investigating the role of hyperconjugation in stabilizing both conformations using the natural bond order method. Here, through comparison of experimental and calculated INS results, this work provides the fundamental basis for discovering the role of structure and dynamics in shaping the macroscopic properties of PET and polymer analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Optical Vibrational Spectroscopic Investigation of Natural and Synthetic Analogs of Uranyl Oxyhydroxyhydrate Minerals

Uranyl oxy-hydroxy-hydrate minerals are common alteration products of uraninite (UO2+x) which is chemically and structurally analogous to uranium dioxide nuclear fuel. Therefore, structural and spectroscopic investigations of these alteration minerals and their analogous anthropogenic counterparts can provide insight into the environmental behavior of nuclear fuel cycle materials. Previously, we compiled available vibrational spectroscopic data for uranyl minerals in the Compendium of Uranium Raman and Infrared Experimental Spectra (CURIES) and found that only 37% of known uranyl oxy-hydroxy-hydrate minerals had spectra readily available in the literature and existing databases for inclusion therein. Furthermore, no available infrared spectra for this mineral group were included in CURIES. To expand our understanding of the spectroscopic features of uranyl oxy-hydroxy-hydrates and the structural origins thereof, we collected, and now include in CURIES, Raman and infrared spectra for an additional 12 uranyl hydroxide phases. To better understand the impact of structural and compositional variations of these phases on their spectroscopic features, we compare Raman spectra of different anion sheet topological groups and of analogous phases hosting different counter cations. We identify spectroscopic variations related to differences in equatorial bonding and structural changes as a result of cation substitution. We also prepare a uranyl hydroxide phase via hydrolysis of uranyl fluoride (UO2F2) as an analog of hydrolysis reactions that occur in nuclear fuel cycle materials; and we find that the alteration product of UO2F2, despite chemical and structural similarities to uranyl oxy-hydroxy-hydrate minerals, is readily distinguishable from related mineral phases using Raman spectroscopy. In this work, we provide new insights into the structural origins of spectroscopic features in uranyl oxy-hydroxy-hydrate minerals, improve the average Raman spectrum for this group of minerals, and thereby improve capabilities for identifying these mineral species and related anthropogenic phases using Raman spectroscopy.

Barth, Brodie [ORNL] (ORCID:0000000256142601)↗
DOE OSTI2023

The structure of plastocyanin tunes the midpoint potential by restricting axial ligation of the reduced copper ion

Blue copper proteins are models for illustrating how proteins tune metal properties. Nevertheless, the mechanisms by which the protein controls the metal site remain to be fully elucidated. A hindrance is that the closed shell Cu(I) site is inaccessible to most spectroscopic analyses. Carbon deuterium (C-D) bonds used as vibrational probes afford nonperturbative, selective characterization of the key cysteine and methionine copper ligands in both redox states. The structural integrity of Nostoc plastocyanin was perturbed by disrupting potential hydrogen bonds between loops of the cupredoxin fold via mutagenesis (S9A, N33A, N34A), variably raising the midpoint potential. The C-D vibrations show little change to suggest substantial alteration to the Cu(II) coordination in the oxidized state or in the Cu(I) interaction with the cysteine ligand. They rather indicate, along with visible and NMR spectroscopy, that the methionine ligand distinctly interacts more strongly with the Cu(I) ion, in line with the increases in midpoint potential. Here we show that the protein structure determines the redox properties by restricting the interaction between the methionine ligand and Cu(I) in the reduced state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗