Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Variable spin-charge conversion across metal-insulator transition

The charge-to-spin conversion efficiency is a crucial parameter in determining the performance of many useful spintronic materials. Usually, this conversion efficiency is predetermined by the intrinsic nature of solid-state materials, which cannot be easily modified without invoking chemical or structural changes in the underlying system. Here we report on successful modulation of charge-spin conversion efficiency via the metal-insulator transition in a quintessential strongly correlated electron compound vanadium dioxide (VO2). By employing ferromagnetic resonance driven spin pumping and the inverse spin Hall effect measurement, we find a dramatic change in the spin pumping signal (decrease by > 80%) and charge-spin conversion efficiency (increase by five times) upon insulator to metal transition. The abrupt change in the structural and electrical properties of this material therefore provides useful insights on the spin related physics in a strongly correlated material undergoing a phase transition.

36 MATERIALS SCIENCE↗

Deactivation of Sn-Beta zeolites caused by structural transformation of hydrophobic to hydrophilic micropores during aqueous-phase glucose isomerization

The structural changes underlying the deactivation of Sn-Beta zeolites under aqueous-phase reaction conditions at elevated temperatures (373 K) are investigated using spectroscopic characterization and site titration techniques together with turnover rates for glucose isomerization, a well-understood probe reaction for which changes in measured rates can be ascribed to specific changes in catalyst structure. In the case of hydrophobic, low-defect Sn-Beta zeolites (Sn-Beta-F), treatment in hot liquid water (373 K) for short times (<1 h) prior to reaction causes glucose–fructose isomerization turnover rates (per open Sn site, 373 K) to increase, while longer-term exposure (>3 h) to hot liquid water causes turnover rates to decrease and approach values characteristic of hydrophilic, defect-rich Sn-Beta zeolites (Sn-Beta-OH). However, turnover rates on hydrophilic Sn-Beta-OH zeolites are insensitive to the duration of hot liquid water exposure prior to reaction. Activation and deactivation phenomena on Sn-Beta-F zeolites occur concomitantly with the formation of silanol defects (by ~2–10×) with increasing durations (0–24 h) of hot water treatment, despite negligible differences in open and closed Sn site speciation as quantified ex situ by CD 3 CN IR spectra. Mechanistic interpretations of these phenomena suggest that silanol groups present at low densities serve as binding sites for water molecules and clusters, which confer enthalpic stability to kinetically-relevant hydride-shift transition states and increase turnover rates, while silanol groups present in higher densities stabilize extended hydrogen-bonded water networks, which entropically destabilize kinetically-relevant transition states and decrease turnover rates. Intraporous voids within hydrophobic Sn-Beta-F zeolites become increasingly hydrophilic as silanol groups are formed by hydrolysis of framework siloxane bridges with increasing durations of water treatment, thereby decreasing aqueous-phase glucose isomerization turnover rates (per open Sn site). These findings imply design strategies that suppress framework hydrolysis would attenuate the deactivation of Lewis acid zeolites in aqueous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of Tb5Ni2In4 and Y5Ni2In4, and magnetic properties of Dy5Ni2In4

The crystal structure of the R5Ni2In4 intermetallic compounds was earlier reported for R Ho, Er, Tm, and Lu (Lu5Ni2In4-type, oP22, Pbam); more recently the isostructural phases Dy5Ni2In4 and Sc5Ni2In4 have also been identified. Three inequivalent crystallographic sites are occupied by the R atoms in these compounds. We have synthesized and characterized Dy5Ni2In4 and the two new isotypic compounds Tb5Ni2In4 and Y5Ni2In4. So far, none of the physical properties have been reported on any of these phases; in this article we report on the physical properties of the Dy5Ni2In4 and the crystal structure of Tb5Ni2In4 and Y5Ni2In4 compounds. Measurements of the magnetic properties performed on Dy5Ni2In4 show a ferromagnetic-like ordering with a T-C approximate to 105 K, followed by multiple magnetic orderings at lower temperatures. The fit of the inverse susceptibility in the paramagnetic state follows the Curie-Weiss law, where mu(eff). - 10.3 mu(B)/Dy-atom (close to theoretical value of 10.64 mu(B) for the free ion Dy3+) and a positive paramagnetic Curie temperature theta(p) - 58 K. Ni atoms are most likely to be nonmagnetic. The heat capacity also shows three peaks: a large one at 103K and two weaker at 12 and 8 K, respectively; the in-field heat capacity data corroborate these results, suggesting ferromagnetic and antiferromagnetic orderings at the temperature of 103 and 12 K, respectively. Low temperature x-ray diffraction has shown that the compound does not undergo any structural change down to 5K. (C) 2012 American Institute of Physics

36 MATERIALS SCIENCE↗

Time dependence of carbon film deposition on SnO{sub 2}/Si using DC unbalanced magnetron sputtering

Carbon deposition on SnO{sub 2} layer has been demonstrated at low temperature using DC unbalanced magnetron-sputtering technique for various time depositions. Before carbon sputtering process, SnO{sub 2} thin layer is grown on silicon substrate by thermal evaporation method using high purity Sn wire and then fully oxidizes by dry O{sub 2} at 225°C. Carbon sputtering process was carried out at pressure of 4.6×10{sup −2} Torr by keeping the substrate temperature of 300 °C for sputtering deposition time of 1 to 4 hours. The properties of SnO{sub 2}/Si structure and carbon thin film on SnO{sub 2} is characterized using SEM, EDAX, XRD, FTIR, and Raman Spectra. SEM images and XRD spectra show that SnO2 thin film has uniformly growth on Si substrate and affected by annealing temperature. Raman and FTIR results confirm the formation of carbon-rich thin film on SnO{sub 2}. In addition, XRD spectra indicate that some structural change occur by increasing sputtering deposition time. Furthermore, the change of atomic structure due to the thermal annealing is analized by XRD spectra and Raman spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal, tensile and rheological properties of high density polyethylene (HDPE) processed and irradiated by gamma-ray in different atmospheres

The aim of this paper is to investigate structural changes of high density polyethylene (HDPE) modified by ionizing radiation (gamma rays) in different atmospheres. The gamma radiation process for modification of commercial polymers is a widely applied technique to promote new physical-chemical and mechanical properties. Gamma irradiation originates free radicals which can induce chain scission or recombination, providing its annihilation, branching or crosslinking. This polymer was irradiated with gamma source of {sup 60}Co at doses of 5, 10, 20, 50 or 100 kGy at a dose rate of 5 kGy/h. The changes in molecular structure of HDPE, after gamma irradiations were evaluated using thermogravimetric analysis (TGA) and tensile machine and oscillatory rheology. The results showed the variations of the properties depending on the dose at each atmosphere.

36 MATERIALS SCIENCE↗

Imaging an isolated water molecule using a single electron wave packet

Observing changes in molecular structure requires atomic-scale Ångstrom and femtosecond spatio-temporal resolution. We use the Fourier transform (FT) variant of laser-induced electron diffraction (LIED), FT-LIED, to directly retrieve the molecular structure of H 2 O+ with picometer and femtosecond resolution without a priori knowledge of the molecular structure nor the use of retrieval algorithms or ab initio calculations. We identify a symmetrically stretched H 2 O+ field-dressed structure that is most likely in the ground electronic state. We subsequently study the nuclear response of an isolated water molecule to an external laser field at four different field strengths. We show that upon increasing the laser field strength from 2.5 to 3.8 V/Å, the O–H bond is further stretched and the molecule slightly bends. The observed ultrafast structural changes lead to an increase in the dipole moment of water and, in turn, a stronger dipole interaction between the nuclear framework of the molecule and the intense laser field. Our results provide important insights into the coupling of the nuclear framework to a laser field as the molecular geometry of H 2 O+ is altered in the presence of an external field.

Chemistry↗

Convective boundary mixing in a post-He core burning massive star model

Convective boundary mixing (CBM) in the advanced evolutionary stages of massive stars is not well understood. Structural changes caused by convection have an impact on the evolution as well as the subsequent supernova, or lack thereof. The effects of convectively driven mixing across convective boundaries during the post He core burn- ing evolution of 25M ⊙ , solar-metallicity, non-rotating stellar models is studied using the MESA stellar evolution code. CBM is modelled using the exponentially decaying dif- fusion coeffcient equation, the free parameter of which, fCBM, is varied systematically throughout the course of the stellar model's evolution with values of (0.002, 0.012, 0.022, 0.032). The effect of varying this parameter produces mass ranges at collapse in the ONe, Si, Fe cores of (1.82M ⊙ , 4.36M ⊙ ), (1.67M ⊙ , 1.99M ⊙ ) and (1.46M ⊙ , 1.70M ⊙ ) respectively, with percent differences from the model with minimal CBM as large as 86.3%. At the presupernova stage, the compactness of the stellar cores from O'Connor & Ott (2011), ξ M , exhibit a range of (0.120, 0.354), suggesting that the extent of CBM in the advanced burning stages of massive stars is an important consideration for the explodability and type of compact remnant. The nucleosynthetic yields from the models, most notably C, O, Ne, Mg and Si are also signi cantly affected by the CBM assumptions, showing non-linear trends with increased mixing. The simulations show that interactions between convective C, Ne and O shells produce signi cant non- linear changes in the evolution, whereas from the end of Si burning, the structural changes attributed to the CBM are dominated by the growth of the convective C shell.

79 ASTRONOMY AND ASTROPHYSICS↗

Role of Histone Tails in Structural Stability of the Nucleosome

Histone tails play an important role in nucleosome structure and dynamics. Here we investigate the effect of truncation of histone tails H3, H4, H2A and H2B on nucleosome structure with 100 ns all-atom molecular dynamics simulations. Tail domains of H3 and H2B show propensity of α-helics formation during the intact nucleosome simulation. On truncation of H4 or H2B tails no structural change occurs in histones. However, H3 or H2A tail truncation results in structural alterations in the histone core domain, and in both the cases the structural change occurs in the H2Aα3 domain. We also find that the contacts between the histone H2A C terminal docking domain and surrounding residues are destabilized upon H3 tail truncation. The relation between the present observations and corresponding experiments is discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Canopy damage and recovery following Hurricane Maria using multitemporal lidar data, Mar/2017 - Mar/2020, Puerto Rico

Hurricane Maria (Category 4) snapped and uprooted canopy trees, removed large branches, and defoliated vegetation across Puerto Rico. The magnitude of forest damages and the rates and mechanisms of forest recovery following Maria provide important benchmarks for understanding the ecology of extreme events. We used airborne lidar data acquired before (2017) and after Maria (2018, 2020) to quantify landscape-scale changes in forest structure along a 439-ha elevational gradient (100 to 800 m) in the Luquillo Experimental Forest. Damages from Maria were widespread, with 73% of the study area losing ≥1 m in canopy height (mean = -7.1 m). Taller forests at lower elevations suffered more damage than shorter forests above 600 m. Yet only 13% of the study area had canopy heights ≤2 m in 2018, a typical threshold for forest gaps, highlighting the importance of damaged trees and advanced regeneration on post-storm forest structure. Heterogeneous patterns of regrowth and recruitment yielded shorter and more open forests by 2020. Nearly 45% of forests experienced initial height loss (<-1 m, 2017-2018) followed by rapid height gain (>1 m, 2018-2020), whereas 21.6% of forests with initial height losses showed little or no height gain, and 17.8% of forests exhibited no structural changes >|1| m in either period. Canopy layers <10 m accounted for most increases in canopy height and fractional cover between 2018-2020, with gains split evenly between height growth and lateral crown expansion by surviving individuals. These findings benchmark rates of gap formation, crown expansion, and canopy closure following hurricane damage. Included in the attached zip file are four TIF and four KML files.

54 ENVIRONMENTAL SCIENCES↗

Method for monitoring/managing electrochemical energy device by detecting intercalation stage changes

A method for determining an operating state (e.g., state-of-charge or state-of-health) and/or generating management (charge/discharge) control information in a system including an electrochemical energy device (EED, e.g., a rechargeable Li-ion battery, supercapacitor or fuel cell) that uses optical sensors to detect the intercalation stage change events occurring in the EED. The externally or internally mounted optical sensors measure operating parameter (e.g., strain and/or temperature) changes of the EED during charge/recharge cycling, and transmit measured parameter data using light signals sent over optical fibers to a detector/converter. A processor then analyzes the measured parameter data, e.g., using a model-based estimation process, to detect intercalation stage changes (i.e., crystalline structure changes caused by migration of guest species, such as Li-ions, between the EED's anode and cathode), and generates the operating state and charge/discharge control information based the analysis.

25 ENERGY STORAGE↗

Changes of O/M, dimension and microstructure of MOX pellet during heat treatment

The oxidation and reduction behaviors of sintered (Pu{sub 0.3}U{sub 0.7})O{sub 2-x} pellets have been studied at 1873 K under a controlled oxygen partial pressure. From the results of oxygen-to-metal (O/M) ratio changes, dimensional and structural changes, it was concluded that the crack nucleation-propagation and the local density change of pores were caused by the tensile and compressive stresses due to the O/M ratio distribution in the direction of the pellet radius. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tailoring Growth Interfaces of Virtual Substrates for Power Electronics

Power electronics materials are poised to play a critical role in fulfilling next generation energy needs, with up to 90% of future energy demand predicted to flow through power electronics at some point.[1] Among a number of candidate materials, AlxGa1-xN is the strongest, having bipolar dopability, thermal and chemical stability, an ultra-wide bandgap, and demonstrated experimental feasibility. However, AlGaN growth is limited by a lack of lattice-matched substrates, ultimately stunting material quality at higher thicknesses needed for power electronics applications. Further, high power applications increasingly call for fully vertical device structures, necessitating a conductive substrate. [1] Recently our group identified the (111) plane of TaC as a conductive surface lattice-matched to Al0.55Ga0.45N, taking inspiration from prior work of AlN and GaN binaries on carbide and boride substrates. [2,3,4] In this talk we demonstrate the growth of (111)-oriented TaC by RF sputtering. We investigate the interface of TaC with sapphire and SiC substrates and identify means to suppress competing Ta2C nucleation in order to stabilize (111)-oriented TaC. Potential stacking sequences are identified with respect to crystal structure and observed twinning in the TaC films. We next assess structural changes and film recrystallization that results from face-to-face annealing of TaC thin films at high temperatures above 1500 degrees Celsius. Changes to grain structure and domain size are assessed by x-ray diffraction and surface morphology is explored using atomic force microscopy. Figure 1 shows significant improvements to in- and out-of-plane strain following annealing along with the formation of terraced step edges at the film surface. Strain as a function of material composition and thickness is considered, as this may play a major role in future nucleation of AlGaN layers.

CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SU↗

Tailoring Growth Interfaces of Virtual Substrates for Power Electronics

Power electronics materials are poised to play a critical role in fulfilling next generation energy needs, with up to 90% of future energy demand predicted to flow through power electronics at some point. AlxGa1-xN ranks high among candidate materials, having bipolar dopability, thermal and chemical stability and an ultra-wide bandgap. However, AlGaN growth is limited by a lack of lattice-matched substrates, ultimately stunting material quality at higher thicknesses needed for power electronics applications. Further, high power applications increasingly call for fully vertical device structures, necessitating a conductive substrate. Recently our group identified the (111) plane of TaC as a conductive surface lattice-matched to Al0.55Ga0.45N, taking inspiration from prior work of AlN and GaN binaries on carbide and boride substrates. In this talk we demonstrate the growth of (111)-oriented TaC by RF sputtering. We investigate the interface of TaC with sapphire and SiC substrates and identify means to suppress competing Ta2C nucleation in order to stabilize (111)-oriented TaC. Potential stacking sequences are identified with respect to crystal structure and observed twinning in the TaC films. We next assess structural changes and film recrystallization that results from face-to-face annealing of TaC thin films at high temperatures above 1500 degrees C. Changes to grain structure and domain size are assessed by x-ray diffraction and surface morphology is explored using atomic force microscopy. Figure 1 shows significant improvements to in- and out-of-plane strain following annealing along with the formation of terraced step edges at the film surface. Strain as a function of material composition and thickness is considered, as this may play a major role in future nucleation of AlGaN layers. (1) R. J. in a face-to-face configuration, as illustrated in the schematic at left. Kaplar et al 2017, ECS J. Solid State Sci. Technol. 6 Q3061; (2) D. M. Roberts et al 2022, https://arxiv.org/abs/2208.11769; (3) T. Aizawa et al 2008, J Crys Growth 310, 1 22; (4) R. Liu et al 2002, Appl. Phys. Lett. 81, 3182-3184.

ENGINEERING↗

Engineered unique elastic modes at a BaTiO 3 /2x1-Ge(001) interface

Here, the strong interaction at an interface between a substrate and thin film leads to epitaxy and provides a means of inducing structural changes in the epitaxial film. These induced material phases often exhibit technologically relevant electronic, magnetic, and functional properties. The 2×1 surface of a Ge(001) substrate applies a unique type of epitaxial constraint on thin films of the perovskite oxide BaTiO 3 where a change in bonding and symmetry at the interface leads to a non-bulk-like crystal structure of the BaTiO 3 . While the complex crystal structure is predicted using first-principles theory, it is further shown that the details of the structure are a consequence of hidden phases found in the bulk elastic response of the BaTiO 3 induced by the symmetry of forces exerted by the germanium substrate.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Coarse-Grained Models for Constant pH Simulations of Carboxylic Acids

A model for carboxylic acids, in both the protonated and deprotonated states, is developed in which hydrogen interaction sites are not used and all interactions are short-ranged. A method for constant pH simulations, which exploits these features of the model, is developed. Here, the constant pH method samples protonation states by making discrete Monte Carlo steps and is able to efficiently move between states in two steps. The method is applied to the polymer poly(methacrylic acid), a pH-responsive polymer that undergoes structural changes as a function of pH. The model is able to reproduce the structural changes induced by pH.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conformational Electroresistance and Hysteresis in Nanoclusters

Among many mechanisms proposed for electroresistance, ones involving structural changes are the least understood because of challenges of controllability and repeatability. Yet structural changes can cause dramatic changes in electronic properties, leading to multiple ways in which conduction paths can be opened and closed, not limited to filament movement or variation in molecular conductance. Here we show at least another way: conformational dependence of the Coulomb charging energy of a nanocluster, where charging induced conformational distortion changes the blockade voltage, which in turn leads to a giant electroresistance. This intricate interplay between charging and conformation change is demonstrated in a nanocluster Zn3O4 by combining a first-principles calculation with a temperature dependent transport model. The predicted hysteretic Coulomb blockade staircase in the current-voltage curve adds another dimension to the rich phenomenon of tunneling electroresistance. The new mechanism also provides a better controlled and repeatable platform to study conformational electroresistance.

36 MATERIALS SCIENCE↗

Molecular mechanism of a covalent allosteric inhibitor of SUMO E1 activating enzyme

E1 enzymes activate ubiquitin (Ub) and ubiquitin-like modifiers (Ubls) in the first step of Ub/Ubl conjugation cascades and represent potential targets for therapeutic intervention in cancer and other life-threatening diseases. Here, we report the crystal structure of the E1 enzyme for the Ubl SUMO in complex with a recently discovered and highly specific covalent allosteric inhibitor (COH000). The structure reveals that COH000 targets a cryptic pocket distinct from the active site that is completely buried in all previous SUMO E1 structures and that COH000 binding to SUMO E1 is accompanied by a network of structural changes that altogether lock the enzyme in a previously unobserved inactive conformation. These structural changes include disassembly of the active site and a 180° rotation of the catalytic cysteine-containing SCCH domain, relative to conformational snapshots of SUMO E1 poised to catalyze adenylation. Altogether, our study provides a molecular basis for the inhibitory mechanism of COH000 and its SUMO E1 specificity, and also establishes a framework for potential development of molecules targeting E1 enzymes for other Ubls at a cryptic allosteric site.

59 BASIC BIOLOGICAL SCIENCES↗