Search NASA⌕ Search

SEARCH · Search NASA

Results for “subset sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Adaptive hybrid simulations for multiscale stochastic reaction networks

The probability distribution describing the state of a Stochastic Reaction Network (SRN) evolves according to the Chemical Master Equation (CME). It is common to estimate its solution using Monte Carlo methods such as the Stochastic Simulation Algorithm (SSA). In many cases, these simulations can take an impractical amount of computational time. Therefore, many methods have been developed that approximate sample paths of the underlying stochastic process and estimate the solution of the CME. A prominent class of these methods include hybrid methods that partition the set of species and the set of reactions into discrete and continuous subsets. Such a partition separates the dynamics into a discrete and a continuous part. Simulating such a stochastic process can be computationally much easier than simulating the exact discrete stochastic process with SSA. Moreover, the quasi-stationary assumption to approximate the dynamics of fast subnetworks can be applied for certain classes of networks. However, as the dynamics of a SRN evolves, these partitions may have to be adapted during the simulation. We develop a hybrid method that approximates the solution of a CME by automatically partitioning the reactions and species sets into discrete and continuous components and applying the quasi-stationary assumption on identifiable fast subnetworks. Our method does not require any user intervention and it adapts to exploit the changing timescale separation between reactions and/or changing magnitudes of copy-numbers of constituent species. We demonstrate the efficiency of the proposed method by considering examples from systems biology and showing that very good approximations to the exact probability distributions can be achieved in significantly less computational time. This is especially the case for systems with oscillatory dynamics, where the system dynamics change considerably throughout the time-period of interest.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ASSOCIATIONS OF HIGH-REDSHIFT QUASI-STELLAR OBJECTS WITH ACTIVE, LOW-REDSHIFT SPIRAL GALAXIES

Following the discovery in the 1960s of radio and optical QSOs it was found that some of them lie very close to low-redshift (z <= 0.01) spiral galaxies with separations of approx<2 arcmin. These were discovered both serendipitously by many observers, and systematically by Arp. They are some of the brightest QSOs in radio and optical wavelengths and are very rare. We have carried out a new statistical analysis of most of those galaxy-QSO pairs and find that the configurations have high statistical significance. We show that gravitational microlensing due to stars or other dark objects in the halos of the galaxies apparently cannot account for the excess. Sampling or identification bias likewise seems unable to explain it. Following this up we selected all approx4000 QSOs with g <= 18 from a catalog of confirmed QSOs in the Sloan Digital Sky Survey, and compared them with various subsets of galaxies from the RC 3 galaxy catalog. In contrast to the earlier results, no significant excess of such QSOs was found around these galaxies. Possible reasons for the discrepancy are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

THE DISKMASS SURVEY. I. OVERVIEW

We present a survey of the mass surface density of spiral disks, motivated by outstanding uncertainties in rotation-curve decompositions. Our method exploits integral-field spectroscopy to measure stellar and gas kinematics in nearly face-on galaxies sampled at 515, 660, and 860 nm, using the custom-built SparsePak and PPak instruments. A two-tiered sample, selected from the UGC, includes 146 nearly face-on galaxies, with B < 14.7 and disk scale lengths between 10 and 20 arcsec, for which we have obtained H{alpha} velocity fields; and a representative 46 galaxy subset for which we have obtained stellar velocities and velocity dispersions. Based on re-calibration of extant photometric and spectroscopic data, we show that these galaxies span factors of 100 in L{sub K} (0.03 < L/L* {sub K} < 3), 8 in L{sub B} /L{sub K} , 10 in R-band disk central surface brightness, with distances between 15 and 200 Mpc. The survey is augmented by 4-70 {mu}m Spitzer IRAC and MIPS photometry, ground-based UBVRIJHK photometry, and H I aperture-synthesis imaging. We outline the spectroscopic analysis protocol for deriving precise and accurate line-of-sight stellar velocity dispersions. Our key measurement is the dynamical disk-mass surface density. Star formation rates and kinematic and photometric regularity of galaxy disks are also central products of the study. The survey is designed to yield random and systematic errors small enough (1) to confirm or disprove the maximum-disk hypothesis for intermediate-type disk galaxies, (2) to provide an absolute calibration of the stellar mass-to-light ratio well below uncertainties in present-day stellar-population synthesis models, and (3) to make significant progress in defining the shape of dark halos in the inner regions of disk galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

A Study of Quasar Selection in the Supernova Fields of the Dark Energy Survey

In this paper, we present a study of quasar selection using the supernova fields of the Dark Energy Survey (DES). We used a quasar catalog from an overlapping portion of the SDSS Stripe 82 region to quantify the completeness and efficiency of selection methods involving color, probabilistic modeling, variability, and combinations of color/probabilistic modeling with variability. In all cases, we considered only objects that appear as point sources in the DES images. We examine color selection methods based on the Wide-field Infrared Survey Explorer (WISE) mid-IR W1-W2 color, a mixture of WISE and DES colors (g - i and i-W1), and a mixture of Vista Hemisphere Survey and DES colors (g - i and i - K). For probabilistic quasar selection, we used XDQSO, an algorithm that employs an empirical multi-wavelength flux model of quasars to assign quasar probabilities. Our variability selection uses the multi-band χ 2 -probability that sources are constant in the DES Year 1 griz-band light curves. The completeness and efficiency are calculated relative to an underlying sample of point sources that are detected in the required selection bands and pass our data quality and photometric error cuts. We conduct our analyses at two magnitude limits, i < 19.8 mag and i < 22 mag. For the subset of sources with W1 and W2 detections, the W1-W2 color or XDQSOz method combined with variability gives the highest completenesses of >85% for both i-band magnitude limits and efficiencies of >80% to the bright limit and >60% to the faint limit; however, the giW1 and giW1+variability methods give the highest quasar surface densities. The XDQSOz method and combinations of W1W2/giW1/XDQSOz with variability are among the better selection methods when both high completeness and high efficiency are desired. We also present the OzDES Quasar Catalog of 1263 spectroscopically confirmed quasars from three years of OzDES observation in the 30 deg 2 of the DES supernova fields. Finally, the catalog includes quasars with redshifts up to z ~ 4 and brighter than i = 22 mag, although the catalog is not complete up to this magnitude limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SINGLE OR DOUBLE DEGENERATE PROGENITORS? SEARCHING FOR SHOCK EMISSION IN THE SDSS-II TYPE Ia SUPERNOVAE

From the set of nearly 500 spectroscopically confirmed Type Ia supernovae (SNe) and around 10,000 unconfirmed candidates from SDSS-II, we select a subset of 108 confirmed SNe Ia with well-observed early-time light curves to search for signatures from shock interaction of the SN with a companion star. No evidence for shock emission is seen; however, the cadence and photometric noise could hide a weak shock signal. We simulate shocked light curves using SN Ia templates and a simple Gaussian shock model to emulate the noise properties of the SDSS-II sample and estimate the detectability of the shock interaction signal as a function of shock amplitude, shock width, and shock fraction. We find no direct evidence for shock interaction in the rest-frame B-band, but place an upper limit on the shock amplitude at 9% of SN peak flux (M{sub B} > - 16.6 mag). If the single degenerate channel dominates type Ia progenitors, this result constrains the companion stars to be less than about 6 M{sub sun} on the main sequence and strongly disfavors red giant companions.

79 ASTRONOMY AND ASTROPHYSICS↗

Data from: "Warming and provenance limit tree recruitment across and beyond the elevation range of subalpine forest"

This data package contains data used to support conclusions drawn in “Warming and provenance limit tree recruitment across and beyond the elevation range of subalpine forest”, by Kueppers et al. 2017. Data were collected in field sites within the Alpine Treeline Warming Experiment (ATWE), located on Niwot Ridge, on the eastern slope of the Colorado Rocky Mountains, USA. Files containing geospatial data are also included, to provide additional locational context.There are four document formats associated with this archive: three comma-separated values (.csv) files, three Microsoft Excel (.xlsx) files, one .pdf data user’s guide, four keyhole markup language (.kml) files, and a compressed folder containing seven ESRI shapefiles (.shp). The .csv files can be opened using any simple text-editor software, R, or Microsoft Excel. The .xlsx files can only be opened using Microsoft Excel. The .kml file can be opened by Google Earth and Google Maps, and the shapefiles can be opened with any GIS application compatible with the file type, such as ESRI’s ArcGIS, and QGIS.We provide two versions of the seedling data file: “PIEN_PIFLseedlings20150522_20150525rev12222020.csv/.xlsx” (hereafter PIEN_PIFLseedlings2015) and “PIEN_PIFLseedlings20160408rev12222020.csv/.xlsx” (hereafter PIEN_PIFLseedlings2016). PIEN_PIFLseedlings2015 contains the data we used in the paper. PIEN_PIFLseedlings2016 contains an updated version of these data that includes sampling from later years. The main differences between the two files lie in the columns titled “k[YEAR],” which describe the number of seedlings that were killed in a particular year. In PIEN_PIFLseedlings2016, there also is an additional year of data for k2015, and k2014 also has additional data input for the 2014 cohort. Additionally, in years 2010-2014, there are minor differences in the number of seedlings killed -- in as few as 0 plots (in 2011) to as many as 5 plots (in 2014) -- due to errors in data input that were rectified in later years.------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Upslope range shifts by subalpine tree species are a widely anticipated effect of climate change. Climate niche models predict subalpine forests to expand upslope, given more suitable growing conditions for adult trees. However, these models do not take into account climates required for successful seedling recruitment and establishment, an essential element for expansion. Further, localized upper treeline populations are hypothesized to contain favorable traits for colonizing the alpine. To test these expectations and to expand our knowledge of seedling recruitment under climate change, we designed a common garden, climate-warming experiment spread across an elevation gradient at Niwot Ridge in the Colorado Rocky Mountains. We focus on two widespread Western North American species, Engelmann spruce (Picea engelmannii Parry ex. Engelm) and limber pine (Pinus flexilis James), which occur at treeline. While the former is considered a late-seral species more tolerant of shade, limber pine is a shade-intolerant pioneer species able to establish on infertile sites.Every autumn, seeds of the two species were collected from high- (3370 m–3570 m) and low-provenance (2910–3240 m) sources close to the experimental sites and sown in our plots. A subset of plots were heated and another subset watered over the summer months to offset the effects of warming. Across five years, we found that seeds originating from low elevation recruited more strongly for both species, although this provenance difference diminished by the fourth year for Engelmann spruce, likely due to small sample sizes. Despite the recruitment of low-provenance seed, warming treatments decreased recruitment at all elevations. Combining this with the likeliness and availability of lower-quality, high provenance seed moving upslope at the treeline, tree migration into the alpine may be slowed. Overall, our findings suggest that the hardier limber pine is likely to become a more significant species in subalpine forest communities in the future, while the more sensitive Engelmann spruce may experience range contraction.

54 ENVIRONMENTAL SCIENCES↗

Real-world outcomes in patients with unresected stage III non-small cell lung cancer

This study examined real-world clinical outcomes such as progression-free survival (PFS), time to metastasis (TTM), overall survival (OS), and health-related quality of life (HRQOL) in patients with unresected stage III non-small cell lung cancer (NSCLC) treated in the community setting. A retrospective review of medical records extracted from 10 US community oncology practices was conducted. Eligible patients were adults diagnosed with stage III NSCLC from 1/1/2011 to 3/1/2016 without evidence of surgical resection within 6 months after stage III NSCLC diagnosis (index date). PFS, OS, and TTM were assessed from the index date, and were analyzed using Kaplan–Meier and Cox regression analyses. HRQOL was assessed for a subset of patients using a patient-reported measure, the 86-item Patient Care Monitor (PCM). Linear mixed models (LMM) were used to assess the impact of patient characteristics and change in PCM scores associated with progression. Among the sample of 478 patients, median PFS (95% confidence interval) was 10 months (9–11), median OS was 20 months (17–22), and median TTM was 30 months (23–45). Most patients (58.2%) experienced disease progression, which the LMM showed to be associated with significant worsening of physical symptoms and psychological states (p < 0.001). This study documented PFS and OS consistent with published literature. The majority of patients experienced disease progression, which was associated with worsening of HRQOL. These findings highlighted the need for better therapeutic options in patients with unresected stage III NSCLC with potential to improve patient outcomes and HRQOL.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Star formation characteristics of CNN-identified post-mergers in the Ultraviolet Near Infrared Optical Northern Survey (UNIONS)

ABSTRACT The importance of the post-merger epoch in galaxy evolution has been well documented, but post-mergers are notoriously difficult to identify. While the features induced by mergers can sometimes be distinctive, they are frequently missed by visual inspection. In addition, visual classification efforts are highly inefficient because of the inherent rarity of post-mergers (~1 per cent in the low-redshift Universe), and non-parametric statistical merger selection methods do not account for the diversity of post-mergers or the environments in which they appear. To address these issues, we deploy a convolutional neural network (CNN) that has been trained and evaluated on realistic mock observations of simulated galaxies from the IllustrisTNG simulations, to galaxy images from the Canada France Imaging Survey, which is part of the Ultraviolet Near Infrared Optical Northern Survey. We present the characteristics of the galaxies with the highest CNN-predicted post-merger certainties, as well as a visually confirmed subset of 699 post-mergers. We find that post-mergers with high CNN merger probabilities [p(x) > 0.8] have an average star formation rate that is 0.1 dex higher than a mass- and redshift-matched control sample. The SFR enhancement is even greater in the visually confirmed post-merger sample, a factor of 2 higher than the control sample.

79 ASTRONOMY AND ASTROPHYSICS↗

Genomic selection in algae with biphasic lifecycles: A Saccharina latissima (sugar kelp) case study

Introduction Sugar kelp ( Saccharina latissima ) has a biphasic life cycle, allowing selection on both thediploid sporophytes (SPs) and haploid gametophytes (GPs). Methods We trained a genomic selection (GS) model from farm-tested SP phenotypic data and used a mixed-ploidy additive relationship matrix to predict GP breeding values. Topranked GPs were used to make crosses for further farm evaluation. The relationship matrix included 866 individuals: a) founder SPs sampled from the wild; b) progeny GPs from founders; c) Farm-tested SPs crossed from b); and d) progeny GPs from farm-tested SPs. The complete pedigree-based relationship matrix was estimated for all individuals. A subset of founder SPs ( n = 58) and GPs ( n = 276) were genotyped with Diversity Array Technology and whole genome sequencing, respectively. We evaluated GS prediction accuracy via cross validation for SPs tested on farm in 2019 and 2020 using a basic GBLUP model. We also estimated the general combining ability (GCA) and specific combining ability (SCA) variances of parental GPs. A total of 11 yield-related and morphology traits were evaluated. Results The cross validation accuracies for dry weight per meter ( r ranged from 0.16 to 0.35) and wet weight per meter ( r ranged 0.19 to 0.35) were comparable to GS accuracy for yield traits in terrestrial crops. For morphology traits, cross validation accuracy exceeded 0.18 in all scenarios except for blade thickness in the second year. Accuracy in a third validation year (2021) was 0.31 for dry weight per meter over a confirmation set of 87 individuals. Discussion Our findings indicate that progress can be made in sugar kelp breeding by using genomic selection.

59 BASIC BIOLOGICAL SCIENCES↗

Measurement of the tt cross section in pp collisions at {radical}(s)=1.96 TeV using dilepton events with a lepton plus track selection

This paper reports a measurement of the cross section for the pair production of top quarks in pp collisions at {radical}(s)=1.96 TeV at the Fermilab Tevatron. The data were collected from the CDF run II detector in a set of runs with a total integrated luminosity of 1.1 fb{sup -1}. The cross section is measured in the dilepton channel, the subset of tt events in which both top quarks decay through t{yields}Wb{yields}l{nu}b, where l=e, {mu}, or {tau}. The lepton pair is reconstructed as one identified electron or muon and one isolated track. The use of an isolated track to identify the second lepton increases the tt acceptance, particularly for the case in which one W decays as W{yields}{tau}{nu}. The purity of the sample may be further improved at the cost of a reduction in the number of signal events, by requiring an identified b jet. We present the results of measurements performed with and without the request of an identified b jet. The former is the first published CDF result for which a b-jet requirement is added to the dilepton selection. In the CDF data there are 129 pretag lepton+track candidate events, of which 69 are tagged. With the tagging information, the sample is divided into tagged and untagged subsamples, and a combined cross section is calculated by maximizing a likelihood. The result is {sigma}{sub tt}=9.6{+-}1.2(stat){sub -0.5}{sup +0.6}(sys){+-}0.6(lum) pb, assuming a branching ratio of BR(W{yields}l{nu})=10.8% and a top mass of m{sub t}=175 GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A SWIFT SURVEY OF ACCRETION ONTO STELLAR-MASS BLACK HOLES

We present a systemic analysis of all of the stellar-mass black hole binaries (confirmed and candidate) observed by the Swift observatory up to 2010 June. The broad Swift bandpass enables a trace of disk evolution over an unprecedented range in flux and temperature. The final data sample consists of 476 X-ray spectra containing greater than 100 counts, in the 0.6-10 keV band. This is the largest sample of high-quality CCD spectra of accreting black holes published to date. In addition, strictly simultaneous data at optical/UV wavelengths are available for 255 (54%) of these observations. The data are modeled with a combination of an accretion disk and a hard spectral component. For the hard component we consider both a simple power-law model and a thermal Comptonization model. An accretion disk is detected at greater than the 5{sigma} confidence level in 61% of the observations. Light curves and color-color diagrams are constructed for each system. Hardness-luminosity and disk fraction-luminosity diagrams are constructed and are observed to be consistent with those typically observed by RXTE, noting the sensitivity below 2 keV provided by Swift. The observed spectra have an average luminosity of {approx}1% Eddington, though we are sensitive to accretion disks down to a luminosity of 10{sup -3} L{sub Edd}. Thus, this is also the largest sample of such cool accretion disks studied to date. The accretion disk temperature distribution displays two peaks consistent with the classical hard and soft spectral states, with a smaller number of disks distributed between these. The distribution of inner disk radii is observed to be continuous regardless of which model is used to fit the hard continua. There is no evidence for large-scale truncation of the accretion disk in the hard state (at least for L{sub x} {approx}> 10{sup -3} L{sub Edd}), with all of the accretion disks having radii {approx}< 40 R{sub g} . Plots of the accretion disk inner radius versus hardness ratio reveal the disk radius to be decreasing as the spectrum hardens, i.e., enters the hard state. This is in contrast to expectations from the standard disk truncation paradigm and points toward a contribution from spectral hardening. The availability of simultaneous X-ray and optical/UV data for a subset of observations facilitates a critical examination of the role of disk irradiation via a modified disk model with a variable emissivity profile (i.e., T(r){proportional_to}r {sup -p}). The broadband spectra (X-ray-optical/UV) reveal irradiation of the accretion disk to be an important effect at all luminosities sampled herein, i.e., p {approx}< 0.75 for luminosities {approx}> 10{sup -3} L{sub Edd}. The accretion disk is found to dominate the UV emission irrespective of the assumed hard spectral component. Overall, we find the broadband soft-state spectra to be consistent with an irradiated accretion disk plus a corona, but we are unable to make conclusive statements regarding the nature of the hard-state accretion flow (e.g., ADAF/corona versus jet). Finally, the Swift data reveal a relation between the flux emitted by the accretion disk and that emitted by the corona, for this sample of stellar-mass black holes, that is found to be in broad agreement with the observed disk-corona relationship in Seyfert galaxies, suggesting a scale invariant coupling between the accretion disk and the corona.

79 ASTRONOMY AND ASTROPHYSICS↗

Stochastic room temperature creep of 316 L stainless steel

The creep behavior of 316 L stainless steel at room temperature was evaluated as a function of time and applied stress using a new high-throughput approach. Several common creep models were evaluated against the observations, leading to deeper analysis of a stress-dependent modified logarithmic creep model. Within this model, multiple sources of uncertainty were compared. Aleatoric stochastic variation between samples under nominally identical conditions was identified as the primary contributor to uncertainty in creep response. Under any particular set of conditions, the sample-to-sample variability in creep strain was as high as a factor of two, highlighting the engineering importance of characterizing large statistical datasets. The model's extrapolation capabilities were assessed by comparing predictions derived from calibration on partial, shorter-duration subsets of the data. In conclusion, these findings underscore the importance of accounting for stochastic effects in predictive modeling of aging phenomena.

High-throughput↗

Monolayer-crystal streptavidin support films provide an internal standard of cryo-EM image quality

Analysis of images of biotinylated Escherichia coli 70S ribosome particles, bound to streptavidin affinity grids, demonstrates that the image-quality of particles can be predicted by the image-quality of the monolayer crystalline support film. Also, the quality of the Thon rings is a good predictor of the image-quality of particles, but only when images of the streptavidin crystals extend to relatively high resolution. When the estimated resolution of streptavidin was 5 Å or worse, for example, the ribosomal density map obtained from 22,697 particles went to only 9.5 Å, while the resolution of the map reached 4.0 Å for the same number of particles, when the estimated resolution of streptavidin crystal was 4 Å or better. It thus is easy to tell which images in a data set ought to be retained for further work, based on the highest resolution seen for Bragg peaks in the computed Fourier transforms of the streptavidin component. The refined density map obtained from 57,826 particles obtained in this way extended to 3.6 Å, a marked improvement over the value of 3.9 Å obtained previously from a subset of 52,433 particles obtained from the same initial data set of 101,213 particles after 3-D classification. These results are consistent with the hypothesis that interaction with the air-water interface can damage particles when the sample becomes too thin. Finally, streptavidin monolayer crystals appear to provide a good indication of when that is the case.

59 BASIC BIOLOGICAL SCIENCES↗

SPITZER AND HEINRICH HERTZ TELESCOPE OBSERVATIONS OF STARLESS CORES: MASSES AND ENVIRONMENTS

We present Spitzer observations of a sample of 12 starless cores selected to have prominent 24 mum shadows. The Spitzer images show 8 mum and 24 mum shadows and in some cases 70 mum shadows; these spatially resolved absorption features trace the densest regions of the cores. We have carried out a {sup 12}CO (2-1) and {sup 13}CO (2-1) mapping survey of these cores with the Heinrich Hertz Telescope (HHT). We use the shadow features to derive optical depth maps. We derive molecular masses for the cores and the surrounding environment; we find that the 24 mum shadow masses are always greater than or equal to the molecular masses derived in the same region, a discrepancy likely caused by CO freezeout onto dust grains. We combine this sample with two additional cores that we studied previously to bring the total sample to 14 cores. Using a simple Jeans mass criterion, we find that approx2/3 of the cores selected to have prominent 24 mum shadows are collapsing or near collapse, a result that is supported by millimeter line observations. Of this subset at least half have indications of 70 mum shadows. All cores observed to produce absorption features at 70 mum are close to collapse. We conclude that 24 mum shadows, and even more so the 70 mum ones, are useful markers of cloud cores that are approaching collapse.

79 ASTRONOMY AND ASTROPHYSICS↗

Degradation of Poly- and Perfluoroalkyl Substances (PFAS) in Water via High Power, Energy-Efficient Electron Beam Accelerator

The goal of the 2-year workplan was to see if electron beam (EB) could be used to break down a sub-set of the larger chemical family of per and polyfluoroalkylated substances (PFAS) in an energy efficient and economical manner when compared to conventional water treatment technologies. Year one (Y1) work focused on sample EB treatment work in the Fermi National Accelerator Laboratory’s (FNALs) Accelerator Applications Demonstration and Development (A2D2) EB accelerator. While there are reportedly thousands of types of PFAS, for the point of most of the work herein, a small subset was examined, typically perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA). PFOA and PFOS are two of the most well studied PFAS and are studied for baseline evaluations and are considered most useful. The work from Y1 provided information about the optimal operating parameters and additives to use when treating PFOS and PFOA via EB. The data were then used to see where in a water treatment system an EB accelerator would be best suited to treat PFAS. A conventional water treatment technology, GAC, was then compared to e-beam treatment technology with respect to energy and costs for treatment. In year two (Y2), several conventional e-beam accelerator designs, and FNAL’s developmental compact SRF accelerator design, were evaluated for their suitability in PFAS treatment, from an energy efficiency and cost standpoint. Several EB parameters were evaluated and optimized for the removal of PFOA and PFOS from water at normal pressure and temperature, measured as total PFAS removal. Under the optimized test conditions both PFOA showed complete destruction to inorganic fluoride, and PFOS to inorganic fluoride and sulfate, with mass balance. The effect on PFAS removal relative to solution pH, total EB dose, EB dose rate, dissolved oxygen concentration (DO), temperature, and initial PFAS concentration were evaluated. In general, PFOA was easier to destroy than PFOS. Degradation products, typically observed under less-than-optimal EB conditions, provided insight to degradation mechanisms. Products were identified to rule out possible deleterious biproduct formation. The water radiolysis radical reaction kinetics with PFOS and PFOA were not dependent on the initial concentration over 5-orders of magnitude from 2 μg/L to 20 mg/L. This is thought to be because there was an overabundance of the reactive water radiolysis radicals relative to PFAS molecules and largely attributed to aqueous electrons. The reaction rates appeared to be diffusion limited. Testing at higher concentrations (100-200 mg/L) showed a decrease in removal efficiency, suggesting alternative kinetics, possibly second order rates, at higher concentrations. In all, we successfully defined a set of optimal EB parameters to treat PFOA and PFOS at concentrations of 20 mg/L in water with destruction efficiencies near 100%. We further tested the optimized EB parameters with other types of PFAS, including shorter and longer fluorocarbon chain homologs of PFOA and PFOS, and PFAS with alternative functional groups such as sulfonamides. Based on our results EB can be optimized as an effective destructive technology for removing PFAS from water. The conditions optimized for PFOA and PFOS were less effective with ultra-short fluorocarbon compounds like TFMS, PFES, PFPS and PFBS, and likely require re-optimization of parameters to them. In all, it was determined that from a cost and energy efficiency standpoint, EB would be best applied to waste streams with relatively high concentrations of PFOS and PFOA and is not as cost effective as GAC treatment for removing low concentrations of PFAS from water. Higher concentrations of PFAS can be found in the wastewater of conventional treatment processes such as RO and IE and therefore EB may be used to supplement such treatment technologies. Some real-world IE regeneration wash water and RO reject water containing higher concentrations of PFAS and obtained from pilot scale industrial wastewater treatment system at a fluorochemical manufacturing facility, showed that EB could remove PFAS from such types of wastewaters. The IE regenerant wash water appeared to be the most efficient of the two types of wastewaters tested. However, some further optimization of the EB parameters for the specific PFAS types present in those wastewaters may be required. Also, the effects of co-present TOC and mineral salts should be considered during such optimization efforts. From the experimental Y1 results it was seen that the aqueous electron drives degradation of the PFAS. In a hypothetical water treatment skid using EB for PFAS destruction the parameters of the system should be optimized to promote aqueous electron production. Before EB treatment, the PFAS should be preconcentrated when possible, the pH should be raised to pH 10 or higher to enhance aqueous electron production, and the water should be nitrogen purged to remove dissolved oxygen to minimize aqueous electron scavenging. An excel spreadsheet was created that calculates optimal conditions based on inlet PFAS concentration and desired outlet concentration, by optimizing the accelerator power, dose rate, water treatment rate, pH and dissolved oxygen levels to reach the desired endpoint. Given this information on accelerator operating conditions five different EB accelerator systems were compared. One EB system was a continuous-wave, linear superconducting accelerator being designed at Fermilab. Three other EB systems (IMPELA at 5% and 25% duty factor and the ILU-14) were normal conducting pulsed linear accelerators. The fifth system was an IBA Rhodotron which is a normal conducting, circular, continuous-wave accelerator. The accelerator efficiency (% of the incoming power that is used in water treatment) was the dominating factor in accelerator choice. The radio frequency (RF) power supply and the accelerator design (superconducting versus warm technology) drive the accelerator efficiency. The IBA Rhodotron was seen to be the most energy efficient commercially available technology with a wall-plug (total) power efficiency of 43% at 400 kW. The Fermilab design, with a prototype for a different application currently being fabricated, was the most energy efficient at 55% when driven by a Klystron RF power supply and as high as 77% when powered by a magnetron. As the Fermilab design was the most energy efficient by approximately 10-30%, further design work was done on the accelerator and beam delivery system specific to the destruction of PFAS in water. The Fermilab design is unique from industrial accelerators in that is superconducting. Superconducting technology allows for the acceleration of electrons without losses. The accelerator must be cooled to below the point where it is superconducting and is operated around 4 degrees Kelvin. The bulk of the design work for the accelerator is on making the accelerator as energy efficient as possible so that it does not require liquid helium and can be cooled with conduction cooling via cryocoolers. Final design work resulted in an EB accelerator that would operate at minimally 200 kW and 10 MeV. Prototype construction would cost $\$ $7.8 million dollars when driven by a Klystron power supply. A second version of the same accelerator would cost $\$ $5.5 million dollars when driven by a magnetron that is still under development. The commercially available 300 kW IBA Rhodotron cost was estimated at approximately $\$ $9 million. While it is hard to directly compare, an operational GAC system used by 3M for groundwater treatment capital cost (2022 dollars) was estimated to cost $\$ $3.3 million. While the capital expense of the EB accelerator systems was higher than GAC, the accelerator EB treatment would result in destruction of the PFAS and not just sequestration of PFAS to form a new waste stream that requires further treatment or disposal. The operating cost to destroy the PFAS via 400 kw EB system was less than $\$ $1000/kg of PFAS destroyed when treating at a 20 mg/L PFAS concentration, compared to GAC with operating costs that calculated at $\$ $27,530 per kg of PFAS sequestered when treating 100 μg/L PFOA and PFOS combined concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CMIP5 model selection for ISMIP6 ice sheet model forcing: Greenland and Antarctica

Abstract. The ice sheet model intercomparison project for CMIP6 (ISMIP6) effort brings together the ice sheet and climate modeling communities to gain understanding of the ice sheet contribution to sea level rise. ISMIP6 conducts stand-alone ice sheet experiments that use space- and time-varying forcing derived from atmosphere–ocean coupled global climate models (AOGCMs) to reflect plausible trajectories for climate projections. The goal of this study is to recommend a subset of CMIP5 AOGCMs (three core and three targeted) to produce forcing for ISMIP6 stand-alone ice sheet simulations, based on (i) their representation of current climate near Antarctica and Greenland relative to observations and (ii) their ability to sample a diversity of projected atmosphere and ocean changes over the 21st century. The selection is performed separately for Greenland and Antarctica. Model evaluation over the historical period focuses on variables used to generate ice sheet forcing. For stage (i), we combine metrics of atmosphere and surface ocean state (annual- and seasonal-mean variables over large spatial domains) with metrics of time-mean subsurface ocean temperature biases averaged over sectors of the continental shelf. For stage (ii), we maximize the diversity of climate projections among the best-performing models. Model selection is also constrained by technical limitations, such as availability of required data from RCP2.6 and RCP8.5 projections. The selected top three CMIP5 climate models are CCSM4, MIROC-ESM-CHEM, and NorESM1-M for Antarctica and HadGEM2-ES, MIROC5, and NorESM1-M for Greenland. This model selection was designed specifically for ISMIP6 but can be adapted for other applications.

54 ENVIRONMENTAL SCIENCES↗

A High Diversity of Eurasian Lineage Low Pathogenicity Avian Influenza A Viruses Circulate among Wild Birds Sampled in Egypt

Surveillance for influenza A viruses in wild birds has increased substantially as part of efforts to control the global movement of highly pathogenic avian influenza A (H5N1) virus. Studies conducted in Egypt from 2003 to 2007 to monitor birds for H5N1 identified multiple subtypes of low pathogenicity avian influenza A viruses isolated primarily from migratory waterfowl collected in the Nile Delta. Phylogenetic analysis of 28 viral genomes was performed to estimate their nearest ancestors and identify possible reassortants. Migratory flyway patterns were included in the analysis to assess gene flow between overlapping flyways. Overall, the viruses were most closely related to Eurasian, African and/or Central Asian lineage low pathogenicity viruses and belonged to 15 different subtypes. A subset of the internal genes seemed to originate from specific flyways (Black Sea-Mediterranean, East African-West Asian). The remaining genes were derived from a mixture of viruses broadly distributed across as many as 4 different flyways suggesting the importance of the Nile Delta for virus dispersal. Molecular clock date estimates suggested that the time to the nearest common ancestor of all viruses analyzed ranged from 5 to 10 years, indicating frequent genetic exchange with viruses sampled elsewhere. The intersection of multiple migratory bird flyways and the resulting diversity of influenza virus gene lineages in the Nile Delta create conditions favoring reassortment, as evident from the gene constellations identified by this study. In conclusion, we present for the first time a comprehensive phylogenetic analysis of full genome sequences from low pathogenic avian influenza viruses circulating in Egypt, underscoring the significance of the region for viral reassortment and the potential emergence of novel avian influenza A viruses, as well as representing a highly diverse influenza A virus gene pool that merits continued monitoring.

59 BASIC BIOLOGICAL SCIENCES↗

Pilot Study of Fuel and Stove Use Behavior of Mongolian Ger Households

To reduce levels of outdoor air pollution, new energy-efficient solid fuel stoves have been offered for sale in the ger regions of Ulaanbaatar, the capital city of Mongolia. These energy efficient stoves ideally use less fuel than the traditional stove and emit a tenth of the pollutant emissions. However, because the stoves were only broadly introduced in August 2011, limited documented information exists of actual household fuel and stove use behaviors or the impact of those behaviors on emissions. During the 2011-2012 heating season (October–March), we evaluated stove use behavior in a small subset of ger households with either a traditional or an energy-efficient stove. Relying on a combination of in-person interviews and stove use monitor (SUM) technology, we observe that stove use behavior can vary substantially between households and identify three main burn cycles related to the use of the energy-efficient stove, which may impact the degree to which particulate matter (PM) emissions can be mitigated. We analyze the temperature data recorded by the SUMs from a convenience sample of 13 ger households with small Turkish (Ulzi) stoves and 4 households with traditional Mongolian stoves. We show that SUMs can potentially play a key role in identifying the frequency of ignition and refueling events and thus the impact user behavior can have on stove emissions. Our analysis reveals that household using small-Turkish stoves in our cohort use their stoves on average 2.5 times per day during the heating season (December 2011-February 2012). But, in a subset of these ger households, the small-Turkish stove use frequency can be as high as four stove use events per day, suggesting the occurrence of refueling events that may lead to increased PM emissions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗