Search NASA⌕ Search

SEARCH · Search NASA

Results for “superstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Characterization of Oxygen Storage and Structural Properties of Oxygen-Loaded Hexagonal R MnO 3+δ ( R = Ho, Er, and Y)

Single-phase polycrystalline samples of stoichiometric RMnO3+delta (R = Er, Y, and Ho) were achieved in the hexagonal P6(3)cm structure through solid state reaction at, similar to 1300 degrees C. Thermogravimetric measurements in oxygen atmospheres demonstrated that samples with the larger Ho and Y show rapid and reversible incorporation of large amounts of excess oxygen (0.3 > delta> 0) at an unusually low temperature range of similar to 190-325 degrees C, indicating the industrial usefulness of RMnO3+delta materials for lower cost thermal swing adsorption processes for oxygen separation from air. Further increase of the excess oxygen intake to delta similar to 0.38 was achieved for all the investigated materials when annealed under high pressures of oxygen. The formation of three oxygen stable phases with 6 = 0, 0.28, and 0.38 was confirmed by thermogravimetric measurements, synchrotron X-rays, and neutron diffraction. In situ synchrotron diffraction proved the thermal stability of these single phases and the regions of their creation and coexistence, and demonstrated that the stability of the delta = 0.28 phase increases with the ionic size of the R ion. Structural modeling using neutron powder diffraction for oxygen excess phases describes the formation and details of a large R3c superstructure observed for HoMnO3.28 by tripling the c-axis of the original parent unit cell. Modeling of the RMnO3.38 (R = Y and Er) oxygen-loaded phase converged on a structural model consistent with the symmetry of Pca2(1).

Abughayada, C.↗

Tunable Room-Temperature Synthesis of Coinage Metal Chalcogenide Nanocrystals from N -Heterocyclic Carbene Synthons

Here we present a new toolset of precursors for semiconductor nanocrystal synthesis, N-heterocyclic carbene (NHC)-metal halide complexes, which enables a tunable molecular platform for the preparation of coinage metal chalcogenide quantum dots (QDs). Phase-pure and highly monodisperse coinage metal chalcogenide (Ag 2 E, Cu 2-x E; E = S, Se) QDs are readily synthesized from the direct reaction of an NHC-MBr synthon (where M = Ag, Cu) with alkylsilyl chalcogenide reagents at room temperature. We demonstrate that the size of the resulting QDs is well tailored by the electron-donating ability of the L-type NHC ligands, which are further confirmed to be the only organic capping ligands on the QD surface, imparting excellent colloidal stability. Local superstructures of the NHC-capped Ag 2 S QDs are observed by TEM, further demonstrating their potential for synthesizing monodisperse ensembles and mediating self-assembly.

36 MATERIALS SCIENCE↗

Transformation of Cerium Oxide Nanoparticles from a Diesel Fuel Additive during Combustion in a Diesel Engine

Nanoscale cerium oxide is used as a diesel fuel additive to reduce particulate matter emissions and increase fuel economy, but its fate in the environment has not been established. Here, cerium oxide released as a result of the combustion of diesel fuel containing the additive Envirox TM , which utilizes suspended nanoscale cerium oxide to reduce particulate matter emissions and increase fuel economy, was captured from the exhaust stream of a diesel engine and was characterized using a combination of bulk analytical techniques and high resolution transmission electron microscopy. The combustion process induced significant changes in the size and morphology of the particles; ~15 nm aggregates consisting of 5 to 7 nm faceted crystals in the fuel additive became 50 to 300 nm, near-spherical, single crystals in the exhaust. Electron diffraction identified the original cerium oxide particles as cerium (IV) oxide (CeO 2 , standard FCC structure) with no detectable quantities of Ce(III), whereas in the exhaust the ceria particles had additional electron diffraction reflections indicative of a CeO 2 superstructure containing ordered oxygen vacancies. The surfactant coating present on the cerium oxide particles in the additive was lost during combustion, but in roughly 30% of the observed particles in the exhaust, a new surface coating formed, approximately 2 to 5 nm thick. The results of this study suggest 28 that pristine, laboratory-produced, nanoscale cerium oxide is not a good substitute for the cerium 29 oxide released from fuel borne catalyst applications and that future toxicity experiments and modeling will require the use/consideration of more realistic materials.

54 ENVIRONMENTAL SCIENCES↗

Synthesis of Operable Process Intensification Systems—Steady-State Design with Safety and Operability Considerations

In this work, we present an integrated approach to synthesize process intensification systems with guaranteed flexibility and safety performances. The synthesis of intensified equipment/flowsheets is addressed through the Generalized Modular Representation Framework (GMF), which utilizes an aggregation of multifunctional mass/heat exchange modules to represent chemical processes. Thus, the optimal design options are investigated as mass- and heat-transfer opportunities using superstructure-based optimization techniques without a prepostulation of plausible configurations. To ensure that the designs can be operated under a specified range of uncertain parameters, a multiperiod GMF representation is developed based on the critical operating conditions identified by flexibility test. Risk assessment, accounting for equipment failure frequency and consequence severity, is incorporated as a constraint into this synthesis model to derive inherently safer designs. The resulting safely operable intensified systems, which are represented via phenomenological modules, are then identified as corresponding equipment-based flowsheets and validated with steady-state simulation. We demonstrate the proposed approach through a case study for the production of methyl tert-butyl ether. Here, the results indicate that safety and operability considerations can result in significant changes in the structural and operating parameters of the optimal intensified design configuration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

2D Homologous Series SrFM n BiS n +2 (M = Pb, Ag 0.5 Bi 0.5 ; n = 0, 1) and Commensurately Modulated Sr 2 F 2 Bi 2/3 S 2

In this work, we report three new mixed-anion two-dimensional (2D) compounds: SrFPbBiS 3 , SrFAg 0.5 Bi 1.5 S 3 , and Sr 2 F 2 Bi 2/3 S 2 . Their structures as well as the parent compound SrFBiS 2 were refined using single-crystal X-ray diffraction data, with the sequence of SrFBiS 2 , SrFPbBiS 3 , and SrFAg 0.5 Bi 1.5 S 3 defining the new homologous series SrFM n BiS n+2 (M = Pb, Ag 0.5 Bi 0.5 ; n= 0, 1). Sr 2 F 2 Bi 2/3 S 2 has a different structure, which is modulated with a q vector of 1/3b* and was refined in superspace group X2/m(0 β 0)00 as well as in the 1x3x1 superstructure with space group C2/m (with similar results). Sr 2 F 2 Bi 2/3 S 2 features hexagonal layers of alternating [Sr 2 F 2 ] 2+ and [Bi 2/3 S 2 ] 2- , and the modulated structure arises from the unique ordering pattern of Sr 2+ cations. SrFPbBiS 3 , SrFAg 0.5 Bi 1.5 S 3 , and Sr 2 F 2 Bi 2/3 S 2 are semiconductors with band gaps of 1.31, 1.21, and 1.85 eV, respectively. The latter compound exhibits room temperature red photoluminescence at ~ 700 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Structure, and Electrical Properties of the Single Crystal Ba 8 Cu 16 As 30

In this work, single crystals of clathrate-I Ba 8 Cu 16 As 30 have been synthesized and their structure and electronic properties determined using synchrotron-based X-ray diffraction and firstprinciples calculations. The structure is confirmed to be $Pm\overline{3}n$ (No. 223), with lattice parameter $a$ = 10.4563(3) Å, and defined by a tetrahedrally bonded network of As and Cu that forms two distinct coordination polyhedra, with Ba residing inside these polyhedra. All crystallographic positions are fully occupied with no vacancies or superstructure with the Cu atoms, while occupying all framework sites in the network, exhibiting a preference for the 6c site. Agreement between the experimental and theoretically predicted structures was achieved after accounting for spin–orbit coupling. Our calculated Fermi surface, electron localization, and charge transfer, as well as a comparison with the results for elemental As 46 , provide insight into the fundamental properties of this clathrate-I material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bridging Structure, Magnetism, and Disorder in Iron-Intercalated Niobium Diselenide, Fe x NbSe 2 , below x = 0.25

Transition-metal dichalcogenides (TMDs) intercalated with magnetic ions serve as a promising materials platform for developing next-generation, spin-based electronic technologies. In these materials, one can access a rich magnetic phase space depending on the choice of intercalant, host lattice, and relative stoichiometry. The distribution of these intercalant ions across given crystals, however, is less well defined–particularly away from ideal packing stoichiometries–and a convenient probe to assess potential longer-range ordering of intercalants is lacking. Here, we demonstrate that confocal Raman spectroscopy is a powerful tool for mapping the onset of intercalant superlattice formation in Fe-intercalated NbSe 2 (Fe x NbSe 2 ) for 0.14 ≤ x < 0.25. We use single-crystal X-ray diffraction to confirm the presence of longer-range intercalant superstructure and employ polarization-, temperature-, and magnetic field-dependent Raman measurements to examine both the symmetry of emergent phonon modes in the intercalated material and potential magnetoelastic coupling. Magnetometry measurements further indicate a correlation between the onset of magnetic ordering and the relative degree of intercalant superlattice formation. These results show Raman spectroscopy to be an expedient, local probe for mapping intercalant ordering in this class of magnetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Breaking π–π Interactions in Carboxylic Acid Monolayers on Rutile TiO 2 (110) Leads to Unexpected Long-Range Ordering

Carboxylic acids are ubiquitous building blocks in supramolecular and surface chemistry because of their strong but reversible binding to metal cations. In these applications, the relative ordering and orientation of the acids can affect performance. We present a rational approach to tuning intermolecular interactions with the goal of maintaining a favorable molecular conformation while also enabling long-range ordering. In particular, we show that scanning tunneling microscopy (STM) images of m- or p-fluorobenzoate monolayers on rutile (110) produced in aqueous solutions display very large (2 × 1) grains without the intermolecular pairing observed in similarly prepared benzoate monolayers. The lack of pairing is attributed to the electronegative fluorine substituent, which reduces π–π or quadrupolar interactions between the phenyl groups on the adjacent molecules and stabilizes a favorable configuration between the aromatic head group and the carboxylate-binding moiety. In spite of the reduced interactions between the head groups, the large grain sizes are indicative of intermolecular interaction energies that significantly exceed thermal energy. These strong interactions are surprising given the 6.6 Å separation between the adjacent molecules. Quantitative measurements of the intermolecular interaction energies from molecularly resolved STM images are a factor of &sim;7 larger than those predicted by dispersion-corrected density functional theory. A number of possible origins for this discrepancy are discussed. This finding suggests a new path to the production of highly ordered monolayers and superstructures of large molecules.

DeBenedetti, William J. I.↗

Self-Assembly of 2D Gold Nanoparticle Superlattice in a Polymer Vesicle Layer Driven by Hydrophobic Interaction

We report self-assembly of gold nanoparticles (AuNPs) into highly ordered superstructures provides a promising route toward fabricating materials with new functionalities or enhanced physical properties. Although self-assembly of AuNPs has garnered significant research attention recently, a highly ordered superlattice of AuNPs under a low concentration in a confined geometry formed by nonfunctionalized materials has not been reported. Herein, we investigate the self-assembly of a 2D AuNPs superlattice in a polymer vesicle layer using hydrophobic interactions, which exhibits centered rectangular lattice symmetry. To create the highly ordered AuNPs superlattice, the P(EG x -b-iPGE y ) block copolymers that form the thickness of the hydrophobic vesicle layer comparable to the size of the AuNP are used as a template to control the AuNP degree of freedom. To the best of our knowledge, this study provides the first demonstration of a centered rectangular structure formation of AuNPs at the vesicle layer in 2D confined geometry.

self-assembly↗

Atomic Origin of the Autocatalytic Reduction of Monoclinic CuO in a Hydrogen Atmosphere

Reducibility is key for the use of bulk metal oxides in chemical transformation involving redox reactions but probing microscopic processes of oxide reduction is challenging. This is because the insulating nature of bulk oxides restricts ion and electron spectroscopic measurements of oxide surfaces. Herein, using a combination of environmental transmission electron microscopy and atomistic modeling, we report direct in-situ atomic-scale observations of the surface and subsurface dynamics and show that the hydrogen induced CuO reduction occurs via the surface decay of Cu-O/Cu bilayer atomic steps, formation of partially reduced CuO superstructure by the self-ordering of O vacancies in the subsurface, and collapse of Cu-O layers in the bulk. In this work, all these substeps can be traced back to the progressively increased concentration and activity of O vacancies in the surface and subsurface of the oxide, thereby leading to the self-accelerated oxide reduction. These results demonstrate the microscopic details that may have broader applicability in modulating various redox processes.

36 MATERIALS SCIENCE↗

Adsorption Behavior of Organic Molecules: A Study of Benzotriazole on Cu(111) with Spectroscopic and Theoretical Methods

The adsorption of organic molecules on solid substrates is important to applications in fields such as catalysis, photovoltaics, corrosion inhibition, adhesion, and sensors. The molecular level description of the surface–molecule interaction and of the adsorption structures in these complex systems is crucial to understand their properties and function. Here, we present an investigation of one such system, benzotriazole (BTAH) on single-crystal Cu(111) in vacuum conditions. BTAH is the most widely used corrosion inhibitor for copper and thus a molecule of great industrial relevance. We show that the co-application of a wide range of spectroscopic techniques with theoretical methods provides unique insight in the description of the atomistic details of the adsorbed structures. Specifically, spectroscopic photoemission, absorption, and standing wave experiments combined with ab initio computational modeling allowed us to identify that benzotriazole forms overlayers of intact BTAH when deposited at low temperature, and it dissociates into BTA and H at room temperature and above. The dissociated molecule then forms complex structures of mixed chains and dimers of BTA bound to copper adatoms. Our work also reveals that copper adatoms at low concentrations, such as the theoretically predicted superstructures, cannot be resolved by means of current X-ray photoelectron spectroscopy as the modeled Cu 2p spectra are practically indistinguishable from those for a Cu surface without adatoms. Overall this study significantly deepens understanding of BTAH on Cu, a system studied for more than 50 years, and it highlights the benefits of combining spectroscopic and computational methods to obtain a complete picture of a complex adsorption system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Targeting One- and Two-Dimensional Ta–Te Structures via Nanotube Encapsulation

Fine control over material synthesis on the nanoscale can facilitate the stabilization of competing crystalline structures. In this report we demonstrate how carbon nanotube reaction vessels can be used to selectively create one-dimensional TaTe 3 chains or two-dimensional TaTe 2 nanoribbons with exquisite control of the chain number or nanoribbon thickness and width. Transmission electron microscopy and scanning transmission electron microscopy reveal the detailed atomic structure of the encapsulated materials. Complex superstructures such as multichain spiraling and apparent multilayer moirés are observed. The rare 2H phase of TaTe 2 (1H in monolayer) is found to be abundant as an encapsulated nanoribbon inside carbon nanotubes. The experimental results are complemented by density functional theory calculations for the atomic and electronic structure, which uncovers the prevalence of 2H-TaTe 2 due to nanotube-to-nanoribbon charge transfer and size confinement. Calculations also reveal new 1T' type charge density wave phases in TaTe 2 that could be observed in experimental studies.

36 MATERIALS SCIENCE↗

Understanding and Manipulating Helical Nanofilaments in Binary Systems with Achiral Dopants

Here, in this paper, we report the relationship between helical pitch of the helical nanofilament (HNF) phase formed by bent-core molecule NOBOW and the concentration of achiral dopants 5CB and octane, using linearly polarized resonant soft X-ray scattering (RSoXS). Utilizing theory-based simulation, which fits well with the experiments, the molecular helices in the filament were probed and the superstructure of helical 5CB directed by groove of HNFs was observed. Quantitative pitch determination with RSoXS reveals that helical pitch variation is related to 5CB concentration with no temperature dependence. Doping rodlike immiscible 5CB led to a pitch shortening of up to 30%, which was attributed to a change in interfacial tension. By shedding light not only on phase behavior of binary systems but also enabling control over pitch length, our work may benefit various applications of HNF-containing binary systems, including optical rotation devices, circularly polarized light emitters, and chirality transfer agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Magnetism of Cobalt Nanoislands Controlled by Atomic Hydrogen

Controlling the spin states of the surface and interface is key to spintronic applications of magnetic materials. We report the evolution of surface magnetism of Co nanoislands on Cu(111) upon hydrogen adsorption and desorption with the hope of realizing reversible control of spin-dependent tunneling. Spin-polarized scanning tunneling microscopy reveals three types of hydrogen-induced surface superstructures, 1H-(2 × 2), 2H-(2 × 2), and 6H-(3 × 3), with increasing H coverage. The prominent magnetic surface states of Co, while being preserved at low H coverage, become suppressed as the H coverage level increases, which can then be recovered by H desorption. First-principles calculations reveal the origin of the observed magnetic surface states by capturing the asymmetry between the spin-polarized surface states and identify the role of hydrogen in controlling the magnetic states. This study offers new insights into the chemical control of magnetism in low-dimensional systems.

36 MATERIALS SCIENCE↗

Hierarchical Materials Design by Pattern Transfer Printing of Self-Assembled Binary Nanocrystal Superlattices

We demonstrate the fabrication of hierarchical materials by controlling the structure of highly ordered binary nanocrystal superlattices (BNSLs) on multiple length scales. Combinations of magnetic, plasmonic, semiconducting, and insulating colloidal nanocrystal (NC) building blocks are self-assembled into BNSL membranes via the liquid–interfacial assembly technique. Free-standing BNSL membranes are transferred onto topographically structured poly(dimethylsiloxane) molds via the Langmuir–Schaefer technique and then deposited in patterns onto substrates via transfer printing. BNSLs with different structural motifs are successfully patterned into various meso- and microstructures such as lines, circles, and even three-dimensional grids across large-area substrates. A combination of electron microscopy and grazing incidence small-angle X-ray scattering (GISAXS) measurements confirm the ordering of NC building blocks in meso- and micropatterned BNSLs. This technique demonstrates structural diversity in the design of hierarchical materials by assembling BNSLs from NC building blocks of different composition and size by patterning BNSLs into various size and shape superstructures of interest for a broad range of applications.

36 MATERIALS SCIENCE↗

Self-Assembly of Quantum Dot–Gold Heterodimer Nanocrystals with Orientational Order

The self-assembly of nanocrystals into ordered superlattices is a powerful strategy for the production of functional nanomaterials. The assembly of well-ordered target structures, however, requires control over the building blocks’ size and shape as well as their interactions. While nanocrystals with homogeneous composition are now routinely synthesized with high precision and assembled into various ordered structures, high-quality multicomponent nanocrystals and their ordered assemblies are rarely reported. In this paper, we demonstrate the synthesis of quantum dot–gold (QD-Au) heterodimers. These heterodimers possess a uniform shape and narrow size distribution and are capped with oleylamine and dodecyltrimethylammonium bromide (DTAB). Assembly of the heterodimers results in a superlattice with long-range orientational alignment of dimers. Using synchrotron-based X-ray measurements, we characterize the complex superstructure formed from the dimers. Molecular dynamics simulations of a coarse-grained model suggest that anisotropic interactions between the quantum dot and gold components of the dimer drive superlattice formation. The high degree of orientational order demonstrated in this work is a potential route to nanomaterials with useful optoelectronic properties.

36 MATERIALS SCIENCE↗

Cu Doping Increases Capacity Retention in LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) by Altering the Potential of the Ni-Based Redox Couple and Inhibiting Particle Pulverization

To discern the influence of Cu 2+ as a dopant on both the structural and electrochemical characteristics of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622), Cu 2+ (aq) was added to the coprecipitation synthesis from the constituent ions. At 5 mol % Cu 2+ , a single-phase Cu-NMC product results, evidenced by an increase in d-spacing along the [003] and [104] directions and a slight increase in the crystal volume of the R–3m hexagonal (rock-salt superstructure) lattice. XRD data and high-resolution TEM imaging support Cu 2+ doping primarily on the transition metal 3b Wyckoff sites. Here, galvanostatic cycling of Cu-NMC shows a reversible gravimetric capacity of 102 mAh/g compared to 136 mAh/g for undoped NMC. Despite the lower capacity, the discharge capacity retention of Cu-NMC is 89% after 100 cycles compared to only 70% for NMC. XPS analysis reveals that this lower capacity is due to an increase in the concentration of Ni 3+ ions at the surface, while XRD data collected at the top and bottom of charge show a smaller decrease in crystalline domain size for Cu-NMC (40.5% decrease) compared to NMC (74.7% decrease), translating to pulverization of the secondary particles.

25 ENERGY STORAGE↗

Lamellar and Hexagonal Assemblies of PEG-Grafted Silver Nanoparticles: Implications for Plasmonics and Photonics

Assembly of silver nanoparticles (AgNPs) grafted with thiolated poly(ethylene glycol) (PEG-SH) with various molecular weights is reported. Synchrotron-based X-ray surface-sensitive diffraction methods are used to determine the nature of two-dimensional (2D) assemblies at liquid/vapor interfaces, and small-angle X-ray scattering (SAXS) is used to monitor the three-dimensional (3D) assemblies in bulk suspensions. We find that assembly can be induced either by the addition of K 2 CO 3 or polyacrylic acid (PAA) to the PEG-AgNP aqueous suspensions. The addition of K 2 CO 3 induces a 2D hexagonal structure at the liquid/vapor interface and a 3D hexagonal columnar structure in solutions, where the columns consist of tethered PEG-AgNP chains. On the other hand, the addition of PAA leads to the formation of a 2D lamella-like distorted hexagonal sheet at the liquid/vapor interface and a 3D lamellar superstructure formed by stacked 2D sheets in the PEG-AgNP suspension. Effects of the core type of nanoparticles on the assembly can be used to control structures for potential applications in plasmonics and photonics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗