Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Experiments on the stability of FeOOH on the surface of the moon

A description is given of an investigation which had been conducted to determine whether the water-bearing phase of FeOOH composition found in the study of lunar rocks could be of lunar origin. The reported experiments demonstrate that FeOOH of any structure cannot exist for any length of time on the surface of the moon. The investigation substantiates, therefore, the original proposal of Taylor et al. (1973) that the FeOOH in the Apollo 16 rocks is due entirely to terrestrial water vapor contamination.

Taylor, L. A.↗
NASA NTRS1977

Structural design significance of tension-tension fatigue data on composites

Constant cycle tension-tension fatigue and related static tension data have been generated on six single composite material/orientation combinations and twenty-one hybrid composite material/orientation combinations. Anomalies are related to the temperature rise and stopped interval creep, whereas endurance limit stresses (runouts) are associated with static proportional limit values, when they occur, and internal damage. The significance of these room temperature-dry data on the design allowables and weight of aerodynamic structueres is discussed. Such structures are helicopter rotor blades and wing and horizontal stabilizer lower surfaces. Typical criteria for turning these data into preliminary allowables are shown, as are examples of such allowables developed from the data. These values are then compared to those that might be used if the structures were made of metal.

Grimes, G. C.↗
NASA NTRS1979

On the internal structure of the major satellites of the outer planets

The structures and thermal evolutions of the large icy-satellites of the outer solar system are considered. It is shown (for bodies comparable in size and mass to the Galilean satellites, having sizeable mass fraction of H2O, and with meteoritic abundances of radioactive materials contained within their silicate fractions) that the crust of solid ice over a liquid mantle predicted by conductive heat-transfer calculations is unstable to large-scale solid-state convection. For appropriate material parameters, convective heat-transfer rates are sufficient to freeze a large liquid mantle on a time scale that is short compared to the lifetime of the body. It is also concluded that the ice layer is convecting at the present time. A reevaluation of previous work, using improved values for material parameters and boundary conditions, reverses earlier conclusions and implies a rigid outer crust with resulting long-term stability of surface features to creep deformation. The combination of a rigid crust with active internal convection presents the additional possibility of surface features that are produced and maintained by dynamic internal processes.

Reynolds, R. T.↗
NASA NTRS1987

Modeling the interactions between the ocean and the environment for microwave radar sensing

An extensive set of X-band microwave backscatter measurements has been analyzed to determine its dependence on winds near the surface, atmospheric stability, and long-wave slopes. These radar measurements, made from a tower in the Gulf of Mexico, were performed in conjunction with an extensive set of simultaneous environmental measurements. The CW microwave system operated at an incidence angle of 45 deg, with antennas directed into winds and waves. Model functions for the radar cross section (RCS) and the modulation transfer function (MTF) are developed that depend on the geophysical variables, including wind stress. Statistical analysis shows that these models functions yield a significant smaller error when fit to the RCS data than a simple wind-speed function displays. A Taylor-series expansion of the returned power from a small area provides a unified function that demonstrates the complementary roles of wave slope and atmospheric fluctuations on both the RCS, the MTF, and the coherence. The issue of linearity of the MTF is addressed with this data set, yielding evidence that this is a valid assumption. These results have direct application to the remote sensing of the mean and fluctuating winds, and the wave spectrum with coherent and incoherent active radars.

Weissman, David E.↗
NASA NTRS1987

Components of the ice age circulation

The effects of ice age boundary conditions on atmospheric dynamics and regional climate patterns are investigated using four GCM simulations. Particular consideration is given to sea surface temperature-sea ice distribution, the appearance of land ice, and the increased elevation of land ice. It is observed that the ice-age sea surface temperature stabilizes the atmosphere over the oceans, increases the frequency of storm tracking through central North America, and amplifies transient eddy energy without increasing baroclinic generation. It is detected that low-elevation ice generates low pressure over eastern North America and southern Europe in winter, while increasing cloud cover and cooling the land in summer. Elevation of the ice sheets cools the land in winter, further intensifies storms off northeastern North America, induces subsidence warming downstream of the European ice sheets in summer, and increases the transient and stationary eddy energy through increased baroclinicity.

Rind, D.↗
NASA NTRS1987

An LDA investigation of three-dimensional normal shock-boundary layer interactions in a corner

Nonintrusive, three-dimensional, measurements have been made of a normal shock wave-turbulent boundary layer interaction. The measurements were made in the corner of the test section of a continuous supersonic wind tunnel in which a normal shock wave had been stabilized. LDA, surface pressure measurement and flow visualization techniques were employed for two freestream Mach number test cases: 1.6 and 1.3. The former contained separated flow regions and a system of shock waves. The latter was found to be far less complicated. The reported results are believed to accurately define the flow physics of each case and may be used as benchmark data to verify three-dimensional computer codes.

Chriss, R. M.↗
NASA NTRS1988

Ceramic Thermal Barriers For Dirty-Fuel Turbines

Report discusses performances of ceramic thermal-barrier coating materials for use in electric-utility gas-turbine engines. Variations of standard coating evaluated in search for coating resistant to dirty fuel. Variations included alterations of level of yttria, replacement of yttria by other stabilizers, controlling surface density (by plasma spray processing, infiltration, laser glazing, or sputtering), and interface treatments.

Miller, Robert A.↗
NASA NTRS1989

Relaminarization of turbulent flow on a flat plate by localized surface heating

Relaminarization of a turbulent boundary layer in air on a flat plate is demonstrated experimentally using localized surface heating. Localized heating is achieved by electrically heating a wire embedded in a thermally insulated substrate (Space Shuttle Tile) on the surface. The stability of the flow downstream of the applied control point increases with decreasing stream temperature in the flow direction. The mean and perturbation velocity profiles without control show that the flow is turbulent. With control, these profiles sequentially change from intermittently turbulent to a fully laminar state. In the relaminarization stage, the turbulent energy is dissipated by molecular transport due to viscous and conductivity mechanisms. The new profile adjusts to a lower Reynolds number based on the momentum thickness than that of the previous turbulent state.

Maestrello, Lucio↗
NASA NTRS1989

Accretion discs around young stellar objects and the proto-sun

Observed IR and UV excesses have widely been interpreted as signatures for accretion disks around young stellar objects. Analyses of the observed properties of these disks are important for the investigation of star formation as well as the dynamics of the protoplanetary disk out of which the solar system was formed. Accretion-disk theories suggest that evolution of protoplanetary disks is determined by the efficiency of angular momentum transport. During the formation stages, the disk dynamics are regulated by mixing of infalling material and disk gas. In the outermost regions of the disk, self-gravity may promote the growth of nonaxisymmetric perturbations which can transfer angular momentum outwards. After infall has ceased, convectively driven turbulence can redistribute angular momentum with an evolutionary timescale of 0.1 - 1 Myr. Convection in protoplanetary disks may eventually be stabilized by surface heating as the disk material is depleted.

Lin, D. N. C.↗
NASA NTRS1990

An LDA investigation of the normal shock wave boundary layer interaction

Nonintrusive measurements have been made of two normal shock wave-boundary layer interactions. Two-dimensional measurements were made throughout the interaction region while three-dimensional measurements were made in the vicinity of the shock wave. The measurements were made in the corner of the test section of a continuous flow supersonic wind tunnel in which a normal shock wave had been stabilized. LDA, surface pressure measurement and flow visualization techniques were employed for two freestream Mach number test cases: 1.6 and 1.3. The former contained separated flow regions and a system of shock waves. The latter was found to be far less complicated. The reported results define the flowfield structure in detail for each case.

Chriss, R. M.↗
NASA NTRS1991

Environmental fatigue of an Al-Li-Cu alloy. Part 1: Intrinsic crack propagation kinetics in hydrogenous environments

Deleterious environmental effects on steady-state, intrinsic fatigue crack propagation (FCP) rates (da/dN) in peak aged Al-Li-Cu alloy 2090 are established by electrical potential monitoring of short cracks with programmed constant delta K and K(sub max) loading. The da/dN are equally unaffected by vacuum, purified helium, and oxygen but are accelerated in order of decreasing effectiveness by aqueous 1 percent NaCl with anodic polarization, pure water vapor, moist air, and NaCl with cathodic polarization. While da/dN depends on delta K(sup 4.0) for the inert gases, water vapor and chloride induced multiple power-laws, and a transition growth rate 'plateau'. Environmental effects are strongest at low delta K. Crack tip damage is ascribed to hydrogen embrittlement because of the following: (1) accelerated da/dN due to part-per-million levels of H2O without condensation; (2) impeded molecular flow model predictions of the measured water vapor pressure dependence of da/dN as affected by mean crack opening; (3) the lack of an effect of film-forming O2; (4) the likelihood for crack tip hydrogen production in NaCl, and (5) the environmental and delta K-process zone volume dependencies of the microscopic cracking modes. For NaCl, growth rates decrease with decreasing loading frequency, with the addition of passivating Li2CO3, and upon cathodic polarization. These variables increase crack surface film stability to reduce hydrogen entry efficiency. The hydrogen environmental FCP resistance of 2090 is similar to other 2000 series alloys and is better than 7075.

Piascik, Robert S.↗
NASA NTRS1991

Breakup of a liquid jet in supersonic crossflow

A theoretical study of the breakup of a circular liquid jet injected transversely into a supersonic air stream is conducted. Two different criteria for breakup are explored in the context of a previously developed model for the behavior of liquid jets in compressible crossflow (Heister et al., 1989). The local sonic point criterion first proposed by Schetz, et al. (1980) is explored, in addition to an auxiliary criterion put forth by Clark (1964) based on surface-tension stability. It is found that the local sonic point appears to provide a more reasonable approximation to the actual location of jet breakup, based on comparisons with limited experimental data.

Li, H.-S.↗
NASA NTRS1990

Interfacial wave theory of dendrite growth - Global mode solution and quantum condition

The signal feedback process at the edge of the dendrite tip is investigated, and the global instability mechanism of the system is derived. A mechanism is developed to describe a discrete set of unstable global modes for the system. Called WEASR, the method considers the wave emission at the turning point and signal reflections between the turning point and the front edge of the tip. It is shown that the method can obtain the asymptotic solutions for the unstable global modes and the quantum condition for the corresponding eigenvalues. A turning point called the pattern formation condition is shown to be crucial in the formation of dendritic structure and the choice of the final tip velocity. The wave emission process is outlined, and the importance of a signal feedback process at the edge of the dendrite tip is demonstrated. Parameters such as stability and surface tension can be analyzed in terms of their effects on WEASR modes.

Xu, Jian-Jun↗
NASA NTRS1990

Blunt-nosed swept supercritical LFC wings without nose flaps

To simplify the design of swept supercritical (SC) Laminar Flow Control (LFC) wings and maintain satisfactory low speed characteristics, blunt-nosed swept SC LFC wings without nose flaps and lower wing loadings were studied. Their boundary layer crossflow in the leading edge area is optimally controlled (1) by compensating the boundary layer crossflow of the front acceleration zone by an opposite crossflow in a downstream pressure rise area, (2) by maintaining a neutrally stable boundary layer crossflow by suction within a narrow spanwise suction strip located close to the wing attachment line in the front acceleration zone. The required suction massflow and power are then very small, especially considering the strongly stabilizing effect of surface and streamline curvature on crossflow stability.

Pfenninger, W.↗
NASA NTRS1991

Environmental fatigue of an Al-Li-Cu alloy. I - Intrinsic crack propagation kinetics in hydrogenous environments

Deleterious environmental effects on steady-state, intrinsic fatigue crack propagation (FCP) rates (da/dN) in peak aged Al-Li-Cu alloy 2090 are established by electrical potential monitoring of short cracks with programmed constant delta K and K(sub max) loading. The da/dN are equally unaffected by vacuum, purified helium, and oxygen but are accelerated in order of decreasing effectiveness of aqueous 1 percent NaCl with anodic polarization, pure water vapor, moist air, and NaCl with cathodic polarization. While da/dN depends on delta K(sup 4.0) for the inert gases, water vapor and chloride induced multiple power-laws, and a transition growth rate 'plateau'. Environmental effects are strongest at low delta K. Crack tip damage is ascribed to hydrogen embrittlement because of the following: (1) accelerated da/dN due to part-per-million levels of H2O without condensation; (2) impeded molecular flow model predictions of the measured water vapor pressure dependence of da/dN as affected by mean crack opening; (3) the lack of an effect of film-forming O2; (4) the likelihood for crack tip hydrogen production in NaCl; and (5) the environmental and delta K-process zone volume dependencies of the microscopic cracking modes. For NaCl, growth rates decrease with decreasing loading frequency, with the addition of passivating Li2CO3, and upon cathodic polarization. These variables increase crack surface film stability to reduce hydrogen entry efficiency. The hydrogen environmental FCP resistance of 2090 is similar to other 2000 series alloys and is better than 7075.

Piascik, Robert S.↗
NASA NTRS1992

Deposition of ozone to tundra

Eddy correlation measurements of O3 deposition fluxes to tundra during the Arctic Boundary Layer Expedition (ABLE 3A) are reported. The mean O3 deposition velocity was 0.24 cm/s in the daytime and 0.12 cm/s at night. The day-to-day difference in deposition velocity was driven by both atmospheric stability and surface reactivity. The mean surface resistance to O3 deposition was 2.6 s/cm in the daytime and 3.4 s/cm at night. The relatively low surface resistance at night is attributed to light-insensitive uptake of O3 at dry upland tundra surfaces. The small day-tonight difference in surface resistance is attributed to additional stomatal uptake by wet meadow tundra plants in the daytime. The mean O3 deposition flux to the world north of 60 deg N in July-August is estimated at 8.2 x 10 exp 10 molecules/sq cm/s. Suppression of photochemical loss by small anthropogenic inputs of nitrogen oxides could have a major effect on O3 concentrations in the summertime Arctic troposphere.

Jacob, D. J.↗
NASA NTRS1942

The Porpoising Characteristics of a Planing Surface Representing the Forebody of a Flying-Boat Hull

Porpoising characteristics were observed on V-body fitted with tail surfaces for different combinations of load, speed, moment of inertia, location of pivot, elevator setting, and tail area. A critical trim was found which was unaltered by elevator setting or tail area. Critical trim was lowered by moving pivot either forward or down or increasing radius or gyration. Increase in mass and moment of inertia increased amplitude of oscillations. Complete results are tabulated and shown graphically.

HULL BOTTOMS, VEE↗
NASA NTRS1993

Alkali metal for ultraviolet band-pass filter

An alkali metal filter having a layer of metallic bismuth deposited onto the alkali metal is provided. The metallic bismuth acts to stabilize the surface of the alkali metal to prevent substantial surface migration from occurring on the alkali metal, which may degrade optical characteristics of the filter. To this end, a layer of metallic bismuth is deposited by vapor deposition over the alkali metal to a depth of approximately 5 to 10 A. A complete alkali metal filter is described along with a method for fabricating the alkali metal filter.

Mardesich, Nick↗