Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Thermal analysis of VCSEL arrays based on first principle theory and finite element method

Al{sub x}Ga{sub 1−x}As is a main epitaxial material of 850-nm VCSEL. In order to analyze lattice match and heat production, the band gap of Al{sub x}Ga{sub 1−x}As was built, using the first-principles calculation theory. In addition, based on thermoelectric coupling three-dimensional (3D) finite element method, details on the surface temperature distributions of different 850-nm VCSEL arrays were analyzed. Array spacing and array form have an effect on heat dissipation of VCSEL arrays. The diamond array with 18 light emitting units shows the best thermal stability among others.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Non-linear dynamics of compound sawteeth in tokamaks

Compound sawteeth is studied with the XTOR-2F code. Non-linear full 3D magnetohydrodynamic simulations show that the plasma hot core is radially displaced and rotates during the partial crash, but is not fully expelled out of the q = 1 surface. Partial crashes occur when the radius of the q = 1 surface exceeds a critical value, at fixed poloidal beta. This critical value depends on the plasma elongation. The partial crash time is larger than the collapse time of an ordinary sawtooth, likely due to a weaker diamagnetic stabilization. This suggests that partial crashes result from a competition between destabilizing effects such as the q = 1 radius and diamagnetic stabilization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Graphene-Based Non-Noble-Metal Catalysts for Oxygen Reduction Reaction in Acid

Non-noble-metal catalysts based on Fe-N-C moieties have shown promising oxygen reduction reaction (ORR) activity in proton exchange membrane fuel cells (PEMFCs). In this study, we report a facile method to prepare a Fe-N-C catalyst based on modified graphene (Fe-N-rGO) from heat treatment of a mixture of Fe salt, graphitic carbon nitride (g-C{sub 3}N{sub 4}), and chemically reduced graphene (rGO). The Fe-N-rGO catalyst was found to have pyridinic N-dominant heterocyclic N (40% atomic concentration among all N components) on the surface and have an average Fe coordination of {approx}3 N (Fe-N{sub 3,average}) in bulk. Rotating disk electrode measurements revealed that Fe-N-rGO had high mass activity in acid and exhibited high stability at 0.5 V at 80 C in acid over 70 h, which was correlated to low H{sub 2}O{sub 2} production shown from rotating ring disk electrode measurements.

30 DIRECT ENERGY CONVERSION↗

Thermal Behavior During the Selective Laser Melting Process of Ti-6Al-4V Powder in the Point Exposure Scan Pattern

Currently, there are two main scan patterns, including the continuous exposure scan pattern and the point exposure scan pattern, during the selective laser melting (SLM) process. The point exposure scan pattern allows a three-dimensional (3-D) printer to build finer detail features as a static molten pool that is more stable than a dynamic one. However, there has been limited theoretical research on the thermal behavior characteristics during the process in the point exposure scan pattern. Therefore, in this study, the simulation of thermal behavior during SLM of Ti-6Al-4V powder in the point exposure scan pattern was performed. The temperature evolution behavior of different positions and the effects of exposure time on the temperature evolution behavior of different positions, temperature distributions, and dimensions of the molten pool were investigated. The results showed that the direct exposure position and unexposed position had significantly different temperature evolution behaviors under a given condition, and the changed exposure time had the greatest influence on the direct exposure position compared with unexposed position. Moreover, the thermal accumulation effect of a former exposure point on a later one decreased with increasing exposure time. In addition, with the increase of exposure time, the maximum temperature of the molten pool was enhanced and the surface morphology of the molten pool changed from an approximate ellipse to an approximate circle. Besides, the molten pool dimensions were found to increase with exposure time, which indicated that the exposure time played an important role in the stability of the molten pool and the metallurgical bonding in the process. Furthermore, the dimensions of the molten pool and metallurgical bonding in the cross-sectional view were obtained through experiments. Good agreement was obtained when comparing the simulated results with the experimental ones.

36 MATERIALS SCIENCE↗

Assessment and Response of Treated Cocos nucifera Reinforced Toughened Epoxy Composite Towards Fracture and Viscoelastic Properties

The current research work is dedicated to addressing the fibre orientation problem and environmental issues through the development of micron-sized coir particle reinforced epoxy composite with enhanced fracture toughness and viscoelastic properties. A ‘specific grade’ standard epoxy adhesive based polymer composite is produced with reinforcement of surface modified coir particle filler. The surface modification on raw coir filler is carried out by NaOH and confirmed by Fourier transform infrared spectroscopy (FTIR), X-ray diffractogram and thermogravimetric analysis (TGA). The reduced intensity of hydroxide functional group as well as the enhanced thermal stability of surface modified coir filler is observed by FTIR and TGA respectively. The properties of produced composite samples are investigated by tensile test with low to high strain rate, fracture toughness test and dynamic mechanical analysis. The investigation revealed an improvement in tensile strength, fracture toughness and storage modulus values of toughened coir–epoxy composite with filler loading. The maximum value of ultimate tensile strength, modulus of elasticity and fracture toughness were 27.58 MPa, 0.738 GPa and 1.792 MPa m{sup 1/2}. The constraints like strain rate and filler content demarcated some critical effects on tensile strength, Young’s modulus and modulus of rupture. The research work suggests the applicability of the developed material as household items, replacement of timber product for indoor and outdoor decorations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Water-mediated interactions between hydrophobic and ionic species in cylindrical nanopores

We use Metropolis Monte Carlo and umbrella sampling to calculate the free energies of interaction of two methane molecules and their charged derivatives in cylindrical water-filled pores. Confinement strongly alters the interactions between the nonpolar solutes and completely eliminates the solvent separated minimum (SSM) that is seen in bulk water. The free energy profiles show that the methane molecules are either in contact or at separations corresponding to the diameter and the length of the cylindrical pore. Analytic calculations that estimate the entropy of the solutes, which are solvated at the pore surface, qualitatively explain the shape of the free energy profiles. Adding charges of opposite sign and magnitude 0.4e or e (where e is the electronic charge) to the methane molecules decreases their tendency for surface solvation and restores the SSM. We show that confinement induced ion-pair formation occurs whenever l{sub B}/D{approx}O(1), where l{sub B} is the Bjerrum length and D is the pore diameter. The extent of stabilization of the SSM increases with ion charge density as long as l{sub B}/D<1. In pores with D{<=}1.2 nm, in which the water is strongly layered, increasing the charge magnitude from 0.4e to e reduces the stability of the SSM. As a result, ion-pair formation that occurs with negligible probability in the bulk is promoted. In larger diameter pores that can accommodate a complete hydration layer around the solutes, the stability of the SSM is enhanced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer-Stabilized Liquid Metal Nanoparticles as a Scalable Current Collector Engineering Approach Enabling Lithium Metal Anodes

Dendrites and dead lithium formation over prolonged cycling have long been challenges that hinder the safe implementation of metallic Li anodes. In this study, we employ polymer-stabilized liquid metal nanoparticles (LM-P NPs) of eutectic gallium indium (EGaIn) to create uniform Li nucleation sites enabling homogeneous lithium electrodeposition. Block copolymers of poly(ethylene oxide) and poly(acrylic acid) (PEO-b-PAA) were grafted onto the EGaIn surface, forming stabilized, well-dispersed NPs. Using a scalable spray coating approach, LM-P NPs were fabricated on copper current collectors, providing lithiophilic PEO sites and interactive carboxyl groups to guide Li deposition. The Li-EGaIn alloying process greatly reduced the Li + diffusion barrier, enabling fast Li transport through the coating layer, resulting in decreased nucleation overpotential. Therefore, about five times lower Li nucleation overpotential was obtained on the LM-P modified Cu with an optimal composition of the polymers than the bare Cu substrates. DFT computations was used to reveal the binding properties between the LM-P layer and Li. Due to the regulated Li plating/stripping process, as-obtained 30 μm Li anodes paired with LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM8 11 ) with a negative/positive electrode capacity (N/P) ratio ~ 10 exhibited stable cycling performance at 0.5C for over 250 cycles, with an average Coulombic efficiency of 99.55%. Ultrathin Li (1 μm) anodes with an N/P ratio ~ 0.6 were also demonstrated in Li|LiFePO 4 cells, which examined the stabilization of Li by LM-P NPs and monitored practical loadings of Li anodes that are close to anode-free systems.

25 ENERGY STORAGE↗

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

High-Ni cathodes are being intensely pursued worldwide for electric vehicles and other energy-dense applications due to their high capacity and low cost. However, structural instabilities during electrochemical cycling and when subjected to thermal treatment have been the major issues hindering their practical deployment. We here report a rational design of coating-integrated-into-synthesis protocol for fabricating surface Ti-enriched LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811#Ti) material. The coating to intermediates is crucial to obtain high structural ordering, both in the bulk and surface of high-Ni cathodes, and the Ti substitute has a unique tri-valence (Ti 3+ ) in a gradient surface distribution. Further, the simulations of projected density of states in the atomistic understanding further certify significantly enhanced stability of lattice oxygen for the NMC811 through such a Ti 3+ -based structure reinforcement. Consequently, the NMC811#Ti cathode delivers a high capacity up to 200mAhg -1 at 0.1 C, along with superior stabilities during air-storage and thermal treatment (up to 297°C at the fully charged state under differential scanning calorimetric measurements). The corresponding NMC811#Ti||graphite full cell exhibits a desired 83.6% capacity retention after 1000 cycles at 0.5 C in a voltage range of 2.8–4.3V. This work demonstrates a delicate surface reinforcement to stabilize high-Ni cathodes for long-life and safe lithium-ion batteries.

36 MATERIALS SCIENCE↗

Photocatalytic Facet Selectivity in BiVO 4 Nanoparticles: Polaron Electronic Structure and Thermodynamic Stability Considerations for Photocatalysis

Selective charge separation among different crystal facets of a semiconductor is an intriguing phenomenon for which there is no firm and full theoretical foundation currently. In this work, we report on a density functional theory + U characterization of band alignment and electron and hole polaron stabilities among the (010), (110), and (011) facets of bismuth vanadate BiVO 4 (BVO). Computation-derived band alignment indicates that the conduction band minima are at nearly the same level among the three facets but that the valence band maxima exhibit a shift. We also modeled electron and hole polarons as localized electrons and holes on vanadium and oxygen, respectively, and determined their relative stabilities from a “bulk” region to a surface region. Calculated stabilities reveal similar stability profiles across the various facets, with electron polarons most stable when localized on subsurface V atoms and hole polarons most stable on surface O atoms. Calculations indicate a small stability preference for electron polarons toward the (011) facet and for hole polarons toward the (110) facet, whereas, experimentally, interfacial reduction is observed to take place selectively on the (010) facet and oxidation on the (110) and (011) facets. Facet selectivity could be occurring on the basis of thermodynamics (electron or holes showing a stronger affinity for some facets over others) or kinetics (electron or hole transport and/or redox processes being more efficient toward/on some facets over others) or a combination of both. This work establishes that thermodynamic stability alone is not responsible for the observed facet selectivity in BVO. Furthermore, we surmise that polaron transport kinetics and interfacial redox kinetics are likely to have a role in facet selectivity in BVO. These issues will be the subject of future publications.

14 SOLAR ENERGY↗

Dry Sliding Wear Behavior of Hot-Dip Aluminized Ti-6Al-4V Alloy as a Function of Sliding Velocity

An aluminized coating was prepared on Ti-6Al-4V alloy by hot-dip aluminizing and subsequently diffusion treatment. Dry sliding wear tests were performed for the aluminized and uncoated Ti-6Al-4V alloy under the loads of 10-50 N at the sliding velocities of 0.5-4 m/s. The wear resistance of the titanium alloy was improved by the aluminized coating under various conditions, especially at 4 m/s. The improved wear performance was suggested to be attributed to the Ti-Al coating and tribo-oxide layer. Tribo-layers were identified to form on worn surfaces under various conditions but their influence on the wear behavior and mechanism was decided by the amount and kind of oxides. The outmost values of the microhardness distribution at subsurfaces as a function of load could be used to identify the property and stability of tribo-layers. At 4 m/s, oxide-containing tribo-layers (more TiO, TiO{sub 2} and trace Fe{sub 2}O{sub 3}) presented high hardness and stability, thus possessed an obvious wear-reduced function. Conversely at 2.68 m/s, no-oxide tribo-layers did not show the protection from wear because of their lower hardness and instability. The formation of tribo-layers under various sliding speeds was noticed to be a process including wear debris production, oxidation and accumulation and densification, even sintering.

36 MATERIALS SCIENCE↗

Membrane-Based Emitter for Coupling Microfluidics with Ultrasensitive Nanoelectrospray Ionization-Mass Spectrometry

An integrated poly(dimethylsiloxane) (PDMS) membrane-based microfluidic emitter for high performance nanoelectrospray ionization-mass spectrometry (nanoESI-MS) has been fabricated and evaluated. The ~100-μm-thick emitter was created by cutting a PDMS membrane that protrudes beyond the bulk substrate. The reduced surface area at the emitter enhances the electric field and reduces wetting of the surface by the electrospray solvent. As such, the emitter provides highly stable electrospray at flow rates as low as 10 nL/min, and is compatible with electrospray solvents containing a large organic component (e.g., 90% methanol). This approach enables facile emitter construction, and provides excellent stability, reproducibility and sensitivity, as well as compatibility with multilayer soft lithography.

10 SYNTHETIC FUELS↗

Handbook of Molecular Beam Epitaxy of Oxide Materials: Epitaxial Complex Oxide Growth on Semiconductors

This chapter covers the epitaxy of complex oxides on common inorganic semiconductors. The chapter opens with an introduction, motivating the subject and highlighting key general challenges (Section 6.1). We then proceed to describe the general steps of the growth procedure in Section 6.2, which concludes with an overall discussion about trade-offs and expectation management, with an emphasis on the oxide–semiconductor interface. From there, the text describes oxide growth on the common semiconductors, starting with silicon (Section 6.3), where surface reactions and oxidation are the most challenging aspects. Oxide epitaxy on germanium is described in Section 6.4, which is a less challenging oxide growth scheme on semiconductors. Section 6.5 describes oxide epitaxy on gallium arsenide, one of the more challenging schemes, where interface stability and surface preparation pose key challenges. Finally, in Section 6.6, oxide epitaxy on gallium nitride is described, where the lattice mismatch takes the stage as the key challenge. Altogether, this chapter aims to provide the reader with the practical knowledge, tactics and strategies for oxide epitaxy on semiconductors.

Demkov, Alexander A↗

Preparation of transition metal nanoparticles and surfaces modified with (co)polymers synthesized by RAFT

A new, facile, general one-phase method of generating thiol-functionalized transition metal nanoparticles and surfaces modified by (co)polymers synthesized by the RAFT method is described. The method includes the steps of forming a (co)polymer in aqueous solution using the RAFT methodology, forming a colloidal transition metal precursor solution from an appropriate transition metal; adding the metal precursor solution or surface to the (co)polymer solution, adding a reducing agent into the solution to reduce the metal colloid in situ to produce the stabilized nanoparticles or surface, and isolating the stabilized nanoparticles or surface in a manner such that aggregation is minimized. The functionalized surfaces generated using these methods can further undergo planar surface modifications, such as functionalization with a variety of different chemical groups, expanding their utility and application.

36 MATERIALS SCIENCE↗

Direct Electrochemistry and Electrocatalysis of Myoglobin Immobilized on Graphene-CTAB-Ionic Liquid Nanocomposite Film

We have investigated direct electrochemistry and electrocatalysis of myoglobin immobilized on graphene-cetylramethylammonium bromide (CTAB)-ionic liquid nanocomposite film on a glassy carbon electrode. The nanocomposite was characterized by TEM, SEM, XPS, and electrochemistry. It was found that the high surface area of graphene was helpful for immobilizing more proteins and the nanocomposite film can provide a favorable microenvironment for MB to retain its native structure and activity and to achieve reversible direct electron transfer reaction at an electrode. The nanocomposite films also exhibit good stability and catalytic activities for the electrocatalytic reduction of H2O2.

59 BASIC BIOLOGICAL SCIENCES↗

Surface Plasmon Resonance and Aggregate Stability of Silver Nanoparticle Complexes with Chemotripsin

Extinction spectra, effective sizes, and aggregate stability of silver nanoparticles and nanocomplexes of silver nanoparticles with chymotrypsin obtained by the reactions of chemical reduction of silver nitrate using sodium borohydride as a reducing agent are studied. It is shown that silver nanoparticles obtained in the absence of chymotrypsin are aggregatively stable only at pH values immediately after synthesis. The placement of the synthesized silver nanoparticles in buffer solutions with pH values from 3.0 to 12.0 resulted in the appearance of a wide absorption band in the visible region of the spectrum, which is due to the agglomeration of silver nanoparticles, which appears to be the result of the destruction of the double electric layer formed by the ions making up sodium borohydride. The presence of chymotrypsin in the reaction medium resulted in significant spectral changes. Unlike silver nanoparticles synthesized in the absence of chymotrypsin, for nanocomplexes of silver nanoparticles with chymotrypsin with a change in pH, the shape of the extinction spectra and the position of the surface plasmon resonance band were preserved, while nanocomplexes of silver nanoparticles with chymotrypsin retained the aggregative stability in solutions in the pH range from 3.0 to 12.0 within a month. The observed stabilization effect of silver nanoparticles over a wide pH range induced by the presence of chymotrypsin in the reaction medium can be used further to develop methods for immobilizing enzymes on nanoparticles of biogenic elements and for creating polyfunctional pharmaceuticals, in which the components of nanocomplexes have different biological activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface structure and equilibrium particle shape of the LiMn 2 O 4 spinel from first-principles calculations

First-principles density functional calculations were used to calculate surface properties of the LiMn 2 O 4 spinel. The calculations were benchmarked to obtain the correct semiconducting, Jahn-Teller distorted electronic ground state of bulk LiMn 2 O 4 and, using the same parameters, the predominant low-index polar surface facets (100), (110), and (111) were calculated to study their structure and stability. Following an investigation of possible surface terminations as well as surface layer reconstructions we find that the (111) LMO surface stabilizes through a targeted site exchange of the undercoordinated surface Mn cations with fully coordinated tetrahedral subsurface Li cations, effectively creating a partial inverse spinel arrangement at the surface. This reconstruction renders the (111) facet the most stable among the investigated facets. Here, the equilibrium (Wulff) shape of a LiMn 2 O 4 particle was constructed and exhibits a cubo-octahedral shape with predominant (1 1 1) facets, in agreement with common experimental findings for the spinel structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conceptual Design of a CERMET NTR Fission Core Using Multiphysics Modeling Techniques

An initial pre-conceptual CERMET Nuclear Thermal Propulsion reactor system is investigated within this paper. Reactor configurations are investigated where the fuel consists of 60 vol.% UO2 and 40 vol.% W where the UO2 consists of Gd2O3 concentrations of 5 and 10 mol.%.Gd2O3. The fuel configuration consisting of 5 mol.% UO2 was found to have a total mass of 2761 kg and a thrust to weight ratio of 4.10 and required a coolant channel surface area to fueled volume ratio of approximately 15.0 in order to keep the centerline temperature below 3000 K. The configuration consisting of 10 mol.% Gd2O3 required a surface area to volume ratio of approximately 12.2 to cool the reactor to a peak temperature of 3000 K and had a total mass of 3200 kg and a thrust to weight ratio of 3.54. It is not known yet what concentration of Gd2O3 is required to maintain fuel stability at 3000 K; however, both reactors offer the potential for operations at 25,000 lb, and at a specific impulse which may range from 900 to 950 seconds.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Controlled synthesis of mesoporous carbon modified by tungsten carbides as an improved electrocatalyst support for the oxygen reduction reaction

Mesoporous carbon was modified with tungsten carbides by the carbothermal hydrogen reduction of a layer of chemisorbed 1:12 phosphotungstic anions (PW{sub 12}O{sub 40}{sup 3-}) on carbon surfaces. Depending on the temperature of carbothermal treatment, different tungsten species, i.e., W, W{sub 2}C, WC, were formed on the carbon matrix. No significant changes in both surface areas and mesostructures were observed during the formation of various tungsten species on carbon surfaces under high-temperature conditions. A uniform dispersion of Pt nanoparticles (1-6 nm) can be achieved via nanoconfinement on the surfaces of both mesoporouscarbon and tungsten carbide-modified mesoporous carbon. Pt nanoparticles supported on mesoporous carbons modified with tungsten carbide (Pt/WC-C) exhibit enhanced electrocatalytic activities relative to the control, in which mesoporous carbons without carbide modification were directly used as a support (Pt/C). In addition, both enhanced thermal stability and good electrochemical stability were observed for the Pt/WC-C electrocatalyst.

08 HYDROGEN↗