Search NASA⌕ Search

SEARCH · Search NASA

Results for “trajectory data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Flight tests of Viking parachute system in three Mach number regimes. 2: Parachute test results

Tests of the Viking 16.15-meter nominal-diameter disk-gap-band parachute were conducted at Mach number and dynamic pressure conditions which bracketed the range postulated for the Viking '75 mission to Mars. Parachutes were deployed at supersonic, transonic, and subsonic speeds behind a simulated Viking entry capsule. All parachutes successfully deployed, inflated, and exhibited sufficient drag and stability for mission requirements. Basic parachute data including loads, drag coefficients, pull-off angles, and canopy area ratios are presented. Trajectory reconstruction and onboard camera data methods were combined to yield continuous histories of both parachute and test-vehicle angular motions which are presented for the period from parachute deployment through steady inflation.

Bendura, R. J.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-33993-DND

Large volcanic eruptions are the primary sources of aerosols in the stratosphere and play an important role in the global climate system. The transformation of sulfur dioxide emitted by volcanoes into sulfuric acid droplets leads to a global cooling effect at the surface by enhanced reflection of solar radiation to space and reduced the earth's radiative budget for months to years. In June 2019, the Raikoke volcano, Kuril Islands (153.24167 E, 48.29167 N) emitted 1.4 Tg of SO2 between June 21st and 22nd with plume injection height between 7 and 15 km based on several ultra-violet and infrared sensors as well as the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) space-based lidar. CALIPSO and the NASA Langley Trajectory Model (LaTM) with GEOS5 meteorological data are used to track dispersed volcanic ash plumes. The trajectory mapping technique will be used to re-construct the 3-dimension structure of volcanic ash and sulfate. Results will be compared with independent observations from the Stratospheric Aerosol and Gas Experiment and GEOS-Chem model outputs to understand the transport of the plume into the stratosphere and its lifetime.

Hyundeok Choi↗
DOE OSTI2022

A Real-Time Data Dashboard for Monitoring Travel Behavior

When running a smartphone app-based travel behavior study, it is important to keep participants engaged in contributing data. Long study durations and/or large samples make it difficult to engage participants in reporting their travel behavior. We developed a dashboard web application called 'emdash' to facilitate and ease the data collection maintenance task. It allows deployers to view trip trajectories, track which participants are uploading data, and generate report ready plots. Emdash can also be useful for deployers to identify ways to best encourage a particular transportation mode shift and to provide feedback and reporting to participants. Using the dashboard, a single admin was able to support a classic travel study with 80 participants. The dashboard is currently deployed in a two-year electric bike (e-bike) pilot study called CanBikeCO, conducted in six locations across Colorado, USA. CanBikeCO targets carbon emissions reduction and equity improvement by evaluating changes to participants' travel behavior when they are offered free e-bikes. Each CanBikeCO location has access to their own version of emdash to help them monitor and support participants. After testing and gathering feedback, we made improvements to the dashboard's usability and scalability, and proposed a method to make detecting data issues easier. Improvements include configurable options and limiting the volume of data sent to the dashboard as study size and duration increase.

ADVANCED PROPULSION SYSTEMS,MATHEMATICS AND COMPUT↗
DOE OSTI2022

Identification of new marker genes from plant single‐cell RNA‐seq data using interpretable machine learning methods

Summary An essential step in the analysis of single‐cell RNA sequencing data is to classify cells into specific cell types using marker genes. In this study, we have developed a machine learning pipeline called single‐cell predictive marker (SPmarker) to identify novel cell‐type marker genes in the Arabidopsis root. Unlike traditional approaches, our method uses interpretable machine learning models to select marker genes. We have demonstrated that our method can: assign cell types based on cells that were labelled using published methods; project cell types identified by trajectory analysis from one data set to other data sets; and assign cell types based on internal GFP markers. Using SPmarker, we have identified hundreds of new marker genes that were not identified before. As compared to known marker genes, the new marker genes have more orthologous genes identifiable in the corresponding rice single‐cell clusters. The new root hair marker genes also include 172 genes with orthologs expressed in root hair cells in five non‐ Arabidopsis species, which expands the number of marker genes for this cell type by 35–154%. Our results represent a new approach to identifying cell‐type marker genes from scRNA‐seq data and pave the way for cross‐species mapping of scRNA‐seq data in plants.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2005

Shuttle Orbiter Contingency Abort Aerodynamics: Real-Gas Effects and High Angles of Attack

An important element of the Space Shuttle Orbiter safety improvement plan is the improved understanding of its aerodynamic performance so as to minimize the "black zones" in the contingency abort trajectories [1]. These zones are regions in the launch trajectory where it is predicted that, due to vehicle limitations, the Orbiter will be unable to return to the launch site in a two or three engine-out scenario. Reduction of these zones requires accurate knowledge of the aerodynamic forces and moments to better assess the structural capability of the vehicle. An interesting aspect of the contingency abort trajectories is that the Orbiter would need to achieve angles of attack as high as 60deg. Such steep attitudes are much higher than those for a nominal flight trajectory. The Orbiter is currently flight certified only up to an angle of attack of 44deg at high Mach numbers and has never flown at angles of attack larger than this limit. Contingency abort trajectories are generated using the data in the Space Shuttle Operational Aerodynamic Data Book (OADB) [2]. The OADB, a detailed document of the aerodynamic environment of the current Orbiter, is primarily based on wind-tunnel measurements (over a wide Mach number and angle-of-attack range) extrapolated to flight conditions using available theories and correlations, and updated with flight data where available. For nominal flight conditions, i.e., angles of attack of less than 45deg, the fidelity of the OADB is excellent due to the availability of flight data. However, at the off-nominal conditions, such as would be encountered on contingency abort trajectories, the fidelity of the OADB is less certain. The primary aims of a recent collaborative effort (completed in the year 2001) between NASA and Boeing were to determine: 1) accurate distributions of pressure and shear loads on the Orbiter at select points in the contingency abort trajectory space; and 2) integrated aerodynamic forces and moments for the entire vehicle and the control surfaces (body flap, speed brake, and elevons). The latter served the useful purpose of verification of the aerodynamic characteristics that went into the generation of the abort trajectories.

Prabhu, Dinesh K.↗
NASA NTRS2008

Wavenumber Domain Focusing of Squinted SAR Data with a Curved Orbit Geometry

Synthetic Aperture Radar systems provide raw data that need focusing to achieve full-resolution imaging. Current SAR applications, including interferometry, require accurate, phase-preserving, and precisely co-registered coherent images over large ground swaths with the highest achievable resolution. In addition to these challenges, stripmap SAR data may be acquired with an off-broadside (squinted) geometry, either by design or through platform motion. The precise batch focusing of these large aperture and wide bandwidth data sets is known to require a 2D frequency processing approach. The standard wave domain focusing algorithm, however, is only exact for data acquired on a rectilinear trajectory. We investigate a generalization of the standard omega-k focusing formulation that allows curved data acquisition tracks. The new formulation can be used in conjunction with a known extension for conical, squinted imaging grids. The approximations necessary to allow the generalized geometry are analyzed to determine the range of applicability of the proposed algorithm. The theory is validated using data simulated with parameters similar to the UAVSAR L-band SAR system.

curved orbit geometry↗
NASA NTRS2009

Data-Link and Surface Map Traffic Intent Displays for NextGen 4DT and Equivalent Visual Surface Operations

By 2025, U.S. air traffic is predicted to increase 3-fold and may strain the current air traffic management system, which may not be able to accommodate this growth. In response to this challenge, a consortium of industry, academia and government agencies have proposed a revolutionary new concept for U.S. aviation operations, termed the Next Generation Air Transportation System or "NextGen". Many key capabilities are being identified to enable NextGen, including the concept of "net-centric" operations whereby each aircraft and air services provider shares information to allow real-time adaptability to ever-changing factors such as weather, traffic, flight trajectories, and security. Data-link is likely to be the primary source of communication in NextGen. Because NextGen represents a radically different approach to air traffic management and requires a dramatic shift in the tasks, roles, and responsibilities for the flight deck, there are numerous research issues and challenges that must be overcome to ensure a safe, sustainable air transportation system. Flight deck display and crew-vehicle interaction concepts are being developed that proactively investigate and overcome potential technology and safety barriers that might otherwise constrain the full realization of NextGen.

Shelton, Kevin J.↗
NASA NTRS1974

Data handling and control of the Mariner Venus Mercury '73 spacecraft

Data handling and control subsystems are described for the MVM73 spacecraft, which demonstrated the feasibility of multiple-planet gravity-assist missions. In spite of strict budgetary constraints, MVM73 carried out experiments utilizing television, an IR radiometer, a UV spectrometer, a fluxgate magnetometer, a charged particle telescope, a modulation-demodulation unit, an X-band and S-band dual frequency communications system, a steerable high-gain antenna, a time-sharing digital articulation and pointing system, and moveable solar panels. The trajectory design and flight data system are described, and the systems governing articulation and pointing and attitude control are discussed.

Scull, J. R.↗
NASA NTRS1992

Short-arc orbit determination using coherent X-band ranging data

The use of X-band frequencies in ground-spacecraft and spacecraft-ground telecommunication links for current and future robotic interplanetary missions makes it possible to perform ranging measurements of greater accuracy than previously obtained. It is shown that ranging data of sufficient accuracy, when acquired from multiple stations, can sense the geocentric angular position of a distant spacecraft. The application of high-accuracy S/X-band and X-band ranging to orbit determination with relatively short data arcs is investigated in planetary approach and encounter scenarios. Actual trajectory solutions for the Ulysses spacecraft constructed from S/X-band ranging and Doppler data are presented; error covariance calculations are used to predict the performance of X-band ranging and Doppler data. The Ulysses trajectory solutions indicate that the aim point for the spacecraft's February 1992 Jupiter encounter was predicted to a geocentric accuracy of 0.20 to 0.23/microrad. Explicit modeling of range bias parameters for each station pass is shown to largely remove systematic ground system calibration errors and transmission media effects from the Ulysses range measurements, which would otherwise corrupt the angle finding capabilities of the data. The Ulysses solutions were found to be reasonably consistent with the theoretical results, which suggest that angular accuracies of 0.08 to 0.1/microrad are achievable with X-band ranging.

Thurman, S. W.↗
NASA NTRSDate not supplied

Progress on Inverse Estimation Technique of Non-Linear Pitch Damping Coefficient Curves Using Free-Flight CFD Generated Trajectories

Characterization of entry vehicle pitch damping coefficient curves is crucial to ensure appropriate re-entry and overall mission success. The pitch damping coefficient (C_(m_q )+C_(m_α ̇ )) is used to encapsulate the oscillatory growth or decay of a body during a trajectory. The inverse estimation technique utilizes an existing Free-Flight CFD (FF-CFD) dataset and wraps a reconstruction algorithm in an optimizer. The reconstruction integrates the planar equations of motion derived by Schoenenberger, Queen [1] using Python’s scipy.integrate.solve_ivp. The optimizer’s objective function is the normalized 𝐿2 residual of the angle of attack peaks between the reconstructed trajectory and the original data produced with FF-CFD. Inclusion of the peak times in this residual calculation allows for simultaneous optimization of the pitch moment coefficient, C_(m_α ). This residual equation is shown below in Eq. 1. The optimizer scipy.optimize.minimize was used with the gradient-based Powell method for the analysis presented, however the differential evolution method was investigated as means of comparison, and was found to produce marginally lower residual values with prohibitively longer run times. Further, the pitch damping curve is found by fitting a cubic interpolation function to a set of (α, (C_(m_q )+C_(m_α ̇ ))) control points, where the α points are held constant and the (C_(m_q )+C_(m_α ̇ )) values are the optimized parameters. The pitch moment curve uses a linear interpolation between the minimum and maximum α in the dataset. FF-CFD generated trajectories using the Dragonfly capsule geometry with the Genesis ballistic range model parameters were simulated and used for this analysis. These FF-CFD trajectories simulate planar motion, as restricted by the reconstructing the equations of motion, of three different cases: 1-DoF (free-to-pitch), 2-DoF (free-to-pitch and heave), and 3-DoF (free-to-pitch, heave, and decelerate). Pitch damping coefficient curves generated using this inverse estimation curve technique with FF-CFD 1-DoF Dragonfly data are found in Fig. 1. Preliminary results reconstructing ballistic range shots using these FF-CFD derived predictions of the pitch damping curve (Fig. 1) are shown in Fig. 2. It should be noted that the ballistic range shot used a Genesis model whereas the FF-CFD data used a Dragonfly geometry, however these geometries are similar.

entry↗
NASA NTRS1953

Impingement of Droplets in 90 deg Elbows with Potential Flow

Trajectories were determined for droplets in air flowing through 90 deg elbows especially designed for two-dimensional potential motion with low pressure losses. The elbows were established by selecting as walls of each elbow two streamlines of the flow field produced by a complex potential function that establishes a two-dimensional flow around a 90 deg bend. An unlimited number of elbows with slightly different shapes can be established by selecting different pairs of streamlines as walls. The elbows produced by the complex potential function selected are suitable for use in aircraft air-intake ducts. The droplet impingement data derived from the trajectories are presented along with equations in such a manner that the collection efficiency, the area, the rate, and the distribution of droplet impingement can be determined for any elbow defined by any pair of streamlines within a portion of the flow field established by the complex potential function. Coordinates for some typical streamlines of the flow field and velocity components for several points along these streamlines are presented in tabular form.

Hacker, Paul T.↗
NASA NTRS1995

Three-dimensional unstructured method for flows past bodies in 6-DOF relative motion

A three dimensional, unstructured-mesh methodology was developed to simulate unsteady flows past bodies in relative motion, where the trajectory was determined from the instantaneous aerodynamics. The method coupled the equations of fluid flow and those of rigid-body dynamics, and captured the time-dependent interference between stationary and moving boundaries. The unsteady, compressible Euler equations were solved on dynamic, unstructured meshes by an explicit, finite-volume, upwind method. The grid adaptation was performed within a window placed around the moving body. The Euler equations of dynamics were solved by a Runge-Kutta integration scheme. The flow solver and the adaptation scheme were validated by simulating the transonic, unsteady flow around a wing undergoing a forced, periodic pitching motion, then comparing the results with the experimental data. To validate the trajectory code, the six-degrees-of-freedom (DOF) motion of a store separating from a wing was computed using the experimentally determined force and moment fields, then comparing with an independently generated trajectory. Finally, the overall methodology was demonstrated by simulating the unsteady flowfield and the trajectory of a store dropped from a wing. The methodology, its computational cost notwithstanding, has proven to be accurate, automated, easy for dynamic gridding, and relatively efficient for the required man-hours.

Singh, K. P.↗
DOE OSTI2024

Temporal covariation of island arc Sr isotopes and seawater chemistry over the past 2 billion years

The chemical compositions of island arc basalts (IAB) reflect contributions from the mantle as well as fluids and melts from the subducting slab. Addition of radiogenic seawater Sr to oceanic crust through hydrothermal alteration and subsequent subduction is often invoked to explain elevated 87 Sr/ 86 Sr signatures in modern IAB. However, changes in the 87 Sr/ 86 Sr of island arc magmatic rocks through time has not been investigated, limiting our understanding of the factors influencing the Sr budgets of arcs throughout Earth’s history. To address this, we compiled 87 Sr/ 86 Sr values from island arc magmatic rocks ranging in age from modern to Paleoproterozoic, only including data from island arc localities that best preserve initial magmatic 87 Sr/ 86 Sr. Median initial 87 Sr/ 86 Sr values are consistently elevated compared to depleted mantle 87 Sr/ 86 Sr over this period, indicating persistent enrichment in radiogenic Sr in island arcs. Moreover, the elevation in island arc 87 Sr/ 86 Sr relative to the depleted mantle is variable. A notable rise in island arc 87 Sr/ 86 Sr during the late Neoproterozoic coincides with a steep increase in seawater 87 Sr/ 86 Sr and Sr concentration. To investigate this potential connectivity, we modeled the 87 Sr/ 86 Sr of island arc magmas between 0 and 830 Ma with inputs of depleted mantle 87 Sr/ 86 Sr, seawater 87 Sr/ 86 Sr, and seawater Sr concentration. The model reproduces the overall trajectory of the compiled data. We interpret the observed temporal variation in island arc 87 Sr/ 86 Sr values and its close association with fluctuations in seawater chemistry as evidence that changes in marine geochemistry have strongly influenced the Sr isotopic record of island arc magmas over time.

Science & Technology - Other Topics↗
NASA NTRS2017

Multi-Modal Active Perception for Autonomously Selecting Landing Sites on Icy Moons

Selecting suitable landing sites is fundamental to achieving many mission objectives in planetary robotic lander missions. However, due to sensing limitations, landing sites which are both safe and scientifically valuable often cannot be determined reliably from orbit, particularly, in icy moon missions where orbital sensing data is noisy and incomplete. This paper presents an active perception approach to Entry Descent and Landing (EDL) which enables the lander to autonomously plan informative descent trajectories, acquire high quality sensing data during descent and exploit this additional information to select higher utility landing sites. Our approach consists of two components: probabilistic modeling of landing site features and approximate trajectory planning using a sampling based planner. The proposed framework allows the lander to plan long horizons paths and remain robust to noisy data. Results in simulated environments show large performance improvements over alternative approaches and show promise that our approach has strong potential to improve science return of not only icy moon missions but EDL systems in general.

autonomy↗
NASA NTRS1956

Impingement of Droplets in 60 Deg Elbows with Potential Flow

Trajectories were determined for water droplets or other aerosol particles in air flowing through 600 elbows especially designed for two-dimensional potential motion. The elbows were established by selecting as walls of each elbow two streamlines of a flow field produced by a complex potential function that establishes a two-dimensional flow around. a 600 bend. An unlimited number of elbows with slightly different shapes can be established by selecting different pairs of streamlines as walls. Some of these have a pocket on the outside wall. The elbows produced by the complex potential function are suitable for use in aircraft air-inlet ducts and have the following characteristics: (1) The resultant velocity at any point inside the elbow is always greater than zero but never exceeds the velocity at the entrance. (2) The air flow field at the entrance and exit is almost uniform and rectilinear. (3) The elbows are symmetrical with respect to the bisector of the angle of bend. These elbows should have lower pressure losses than bends of constant cross-sectional area. The droplet impingement data derived from the trajectories are presented along with equations so that collection efficiency, area, rate, and distribution of droplet impingement can be determined for any elbow defined by any pair of streamlines within a portion of the flow field established by the complex potential function. Coordinates for some typical streamlines of the flow field and velocity components for several points along these streamlines are presented in tabular form. A comparison of the 600 elbow with previous calculations for a comparable 90 elbow indicated that the impingement characteristics of the two elbows were very similar.

Hacker, Paul T.↗
NASA NTRS1974

Long arc orbit determination for Mariner 9 using combined radio and optical data types

Results of postflight orbit determination for the Mariner 9 trajectory (Mariner-Mars 1971 mission) using Doppler data combined with optical data in the form of TV photographs of the natural satellites and Mars' surface features. It is shown that the combined data yield a solution which is a factor of 3 to 5 better than that obtained from Doppler-only solutions for the node of the orbit relative to the plane perpendicular to the Earth-Mars line. Consequently, these optical data types have a demonstrated potential to significantly improve planetary orbiter navigation accuracies.

Born, G. H.↗
DOE OSTI2025

Relationship between microporous structure and light gas transport through glassy polymeric membranes revealed by molecular simulations

Microporous glassy polymers are attractive materials for gas separation membranes, due to their high permeability and tailorable selectivity, provided physical aging can be delayed. The archetypal microporous glassy polymer, PTMSP, can be blended with a hyper-crosslinked isatin–triptycene porous polymer network (PPN) to delay physical aging. However, while PPN is effective at reducing physical aging, it also affects the permeability of light gases through PTMSP. Molecular dynamics simulations were used here to shed fundamental light on the mechanisms responsible for these effects. Atomistic models are developed that satisfactorily reproduce experimental observations such as matrix density and cavity size distributions for neat PTMSP as well as for PTMSP–PPN blends. Analysis of the simulation results suggests that physical aging is delayed because the PPN inclusions slow down PTMSP relaxation while reducing the connectivity between free volume pockets. To understand how PPN inclusions affect light gas permeability, the atomistic models developed are used to probe CO 2 and CH 4 diffusion and sorption. These simulations are conducted for PTMSP matrices exhibiting varying density, towards reproducing experimental permeability data. Interrogating the simulation trajectories, it is discovered that while CH 4 travels preferentially through the free volume cavities, CO 2 preferentially interacts with the available surfaces, especially in the presence of PPN. These differences help interpret experimental observations. The transport of C 2 H 6 and H 2 S through PTMSP matrices was also investigated. These gases, and in particular H 2 S, were found to absorb within PTMSP, yielding very low diffusion coefficients. The ability to predict differences in diffusion pathways for various natural gas components unveils the possibility of engineering membranes to control permeability and selectivity towards large-scale applications.

Bao Le, Tran Thi [Univ. of Oklahoma, Norman, OK (U↗
DOE OSTI2021

Operator learning for predicting multiscale bubble growth dynamics

We report simulating and predicting multiscale problems that couple multiple physics and dynamics across many orders of spatiotemporal scales is a great challenge that has not been investigated systematically by deep neural networks (DNNs). Herein, we develop a framework based on operator regression, the so-called deep operator network (DeepONet), with the long-term objective to simplify multiscale modeling by avoiding the fragile and time-consuming “hand-shaking” interface algorithms for stitching together heterogeneous descriptions of multiscale phenomena. To this end, as a first step, we investigate if a DeepONet can learn the dynamics of different scale regimes, one at the deterministic macroscale and the other at the stochastic microscale regime with inherent thermal fluctuations. Specifically, we test the effectiveness and accuracy of the DeepONet in predicting multirate bubble growth dynamics, which is described by a Rayleigh–Plesset (R–P) equation at the macroscale and modeled as a stochastic nucleation and cavitation process at the microscale by dissipative particle dynamics (DPD). First, we generate data using the R–P equation for multirate bubble growth dynamics caused by randomly time-varying liquid pressures drawn from Gaussian random fields (GRFs). Our results show that properly trained DeepONets can accurately predict the macroscale bubble growth dynamics and can outperform long short-term memory networks. We also demonstrate that the DeepONet can extrapolate accurately outside the input distribution using only very few new measurements. Subsequently, we train the DeepONet with DPD data corresponding to stochastic bubble growth dynamics. Although the DPD data are noisy and we only collect sparse data points on the trajectories, the trained DeepONet model is able to predict accurately the mean bubble dynamics for time-varying GRF pressures. Taken together, our findings demonstrate that DeepONets can be employed to unify the macroscale and microscale models of the multirate bubble growth problem, hence providing new insight into the role of operator regression via DNNs in tackling realistic multiscale problems and in simplifying modeling with heterogeneous descriptions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗