Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALKYLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

An experimental and kinetic modeling study of the ignition of 2-methyl decane

Ignition delay times (IDTs) of 2-methyl decane (C 11 H 24 -2) are measured in a high-pressure shock tube and in a rapid compression machine at equivalence ratios in the range 0.5–2.0 at 90 % dilution, at temperatures in the range 600–1430 K and at pressures of 15 and 30 bar. To clarify the effect of the branched methyl group on fuel oxidation, IDTs of n-undecane (nC 11 H 24 ) are also measured at similar conditions to those measured for C 11 H 24 -2. A new chemical kinetic mechanism, using C3MechV4.0.1 as the core chemistry, is developed and validated against the new experimental data. The thermodynamic properties of the fuel (RH), alkyl (Ṙ), alkyl peroxy (RȮ 2 ), hydroperoxy-alkyl (Q̇OOH), and peroxy hydroperoxy alkyl (Ȯ 2 QOOH) radicals are updated in both the C 11 H 24 -2 and nC 11 H24 models using THERM25. A reaction path flux analysis for C 11 H 24 -2 at different temperatures was conducted. Compared to nC 11 H 24 , C 11 H 24 -2 shows slower reactivity. At low and intermediate temperatures, the chain propagation pathway Q̇OOH ↔ C 11 cyclic ether + ȮH is favored for C 11 H 24 -2, while the chain branching pathway Q̇OOH ↔ Ȯ 2 QOOH ↔ C 11 carbonyl hydroperoxide (KHP) + ȮH is suppressed, leading to lower reactivity compared to nC 11 H 24 . At high temperatures, the presence of the branched methyl group inhibits the direct decomposition of the fuel, resulting in reduced C 2 H 4 formation, which in turn suppresses the reactivity of the fuel.

2-methyl decane↗

On the role of methyl groups in the molecular architectures of mesophase pitches

The role of methyl groups on the liquid–crystal structure of mesophase pitches was investigated by combining experimental characterizations and atomic-scale computational modeling, using three pitches synthesized from different precursors. Of the three pitches, C-9 alkyl benzene and naphthalene-based pitches have 13 and 7 methyl groups per average polyaromatic hydrocarbon, respectively. By contrast, mesophase produced from a coal-tar pitch has about one methyl group. The coal tar–based mesophase pitch is hydrogen deficient or more aromatic compared with C-9 alkyl benzene- and naphthalene-based pitches. Additionally, X-ray diffraction data showed that average coherent domain sizes of C-9 alkyl benzene (3.7 nm) and naphthalene-based (3.6 nm) pitches with more methyl groups are larger than that of coal tar–based mesophase (2.4 nm). Based on the identified features, the influence of the methyl group on the layering structures was investigated via molecular dynamics simulations. The results revealed that methyl groups are critical in mesophase layering in C-9 alkyl benzene- and naphthalene-based pitches, by reducing CH-π interaction. However, similar alignment could be achieved without the same degree of methyl substitutions for the coal tar-based pitch because of stronger π-π interaction than the other precursors. The insights from this study contribute to our understanding of the formation of conventional mesophase pitch and have implications for the processing of coal-derived materials. In conclusion, this knowledge is vital to produce valuable products like carbon fiber and graphite from pitches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intrinsic activation energies for ring contraction of allylic cations in zeolites

Cyclic carbocations are important intermediates in zeolite-catalyzed chemistries such as methanol-to-hydrocarbons conversion, naphthenes ring opening, or coke formation. While information about their thermodynamic stability exists, little is known about the kinetics of formation and transformation of cyclic carbocations in zeolites. To fill this knowledge gap, ring contraction of the 1,3,5,5-tetramethylcyclohexenyl cation (C 10 H 17 + ), a representative of 6-membered ring allylic cations, was investigated by in situ UV–vis and IR spectroscopy. Protonic forms of zeolites served as catalysts, at temperatures from 80 °C to 135 °C. Significant oligomerization and hydride transfer in BEA and FAU hampered kinetics analysis, whereas ring contraction dominated in the channels of MOR. The reactant cation, characterized by an electronic absorption at 314 nm and an allylic stretch at 1549 cm −1 , contracted to both a 1,3-alkyl-substituted cyclopentenyl cation (287 nm and 1506 cm −1 ) and a 1,2,3-alkyl-substituted cyclopentenyl cation (297 nm and 1489 cm −1 ). Collection of time-resolved IR spectra and fitting of the intensities with various kinetic models revealed a third transformation, which is expected from thermodynamics: the 1,3-alkyl-substituted cyclopentenyl cation isomerizes to the 1,2,3-alkyl-substituted cyclopentenyl cation. Series of IR spectra recorded at different temperatures delivered intrinsic activation enthalpies (entropies) in MOR of 67 ± 2 kJ mol −1 (−130 ± 6 J mol −1 K −1 ) and 90 ± 3 kJ mol −1 (−70 ± 8 J mol −1 K −1 ) for the contraction to 1,3- and 1,2,3-substituted species, and of 88 ± 5 kJ mol −1 (−84 ± 12 J mol −1 K −1 ) for the isomerization. The findings characterize one path – via contraction of larger rings – to different cyclopentenyl species in zeolites; and the associated, moderate activation energies suggest such transformations contribute to many complex hydrocarbon reaction networks.

Acid catalysis↗

Synthesis of size tuneable cadmium sulphide nanoparticles from a single source precursor using ammonia as the solvent

Graphical abstract: UV-vis absorption spectra for CdS prepared by decomposing cadmium xanthates (Cd(ROCS{sub 2}){sub 2}) exhibit a marked blue-shift with increasing the alkyl chain length (where R denotes: (a) -C{sub 2}H{sub 5}, (b) -C{sub 4}H{sub 9}, (c) -C{sub 8}H{sub 17}, and (d) -C{sub 12}H{sub 25}, respectively), indicating the progressive size reduction of formed CdS nanoparticles. Highlights: Black-Right-Pointing-Pointer Synthesis of CdS nanoparticles using a single source precursor. Black-Right-Pointing-Pointer Tailoring the nanocrystal sizes using cadmium alkyl xanthate with different carbonyl length. Black-Right-Pointing-Pointer Preparation in an environment-friendly solvent. -- Abstract: Size tuneable cadmium sulphide nanoparticles of a few nanometres in size were prepared by thermolysis of a single source precursor of cadmium xanthates with variable carbon chain length (Cd(ROCS{sub 2}){sub 2}, where R denotes -C{sub 2}H{sub 5}, -C{sub 4}H{sub 9}, -C{sub 8}H{sub 17} and -C{sub 12}H{sub 25}, respectively) in an ammonia solution. The particle size, morphology and crystallinity of these nanoparticles were characterized using X-ray powder diffractometry, transmission electron microscopy, and nitrogen adsorption/desorption techniques. The results show that hexagonal CdS nanoparticles can be produced by thermolysis of cadmium alkyl xanthate in an ammonia solution at a temperature as low as 100 Degree-Sign C. The size of CdS particles (between 5.60 nm and 3.71 nm) decreases with increasing length of carbon chain in the precursor, as further confirmed by UV-visible and fluorescence spectrophotometric measurements. The size tuning mechanism of CdS from cadmium alkyl xanthate is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Confocal Raman Microscopy Investigation of Self-Assembly of Hybrid Phospholipid Bilayers within Individual Porous Silica Chromatographic Particles

Hybrid-supported phospholipid bilayers are a model structure utilized for measurement of molecular interactions that typically occur at cell membranes. These membrane models are prepared by adsorption of a lipid monolayer onto a stable n -alkyl chain layer that is covalently-bound to a support surface. Hybrid bilayers have been adapted to chromatographic retention measurements of lipophilicity through the assembly of a phospholipid monolayer onto n -alkane-modified silica surfaces in reversed-phase chromatographic particles. Recent Raman microscopy studies of these particles have shown that the acyl chains of the phospholipid interact with the C 18 -alkyl chains immobilized on the silica surface, where both lipid and C 18 alkyl chains become ordered due to chain interdigitation. Confocal Raman microscopy has also been used to investigate the association of small molecules with hybrid-lipid bilayers in C 18 chromatographic silica particles; the partitioning of model solutes compares favorably to that in lipid vesicle membranes with similar changes in acyl-chain structure (disordering) with solute partitioning. The present study seeks information about how these membrane-mimetic bilayers assemble onto the C 18 –derivatized silica surfaces of reversed-phase chromatographic silica particles. Confocal Raman microscopy is capable of interrogating the time-dependent internal composition and structure within individual silica particles. The Raman scattering data can be resolved into component Raman spectra and corresponding composition vectors that describe the time-dependent changes in intensity of the component spectra. This analysis provides insight into how the structures of both the lipid and C 18 alkyl chains of hybrid lipid bilayers evolve during deposition and organization on the internal surfaces of reversed-phase chromatographic silica particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesophase stabilization in ionic liquid crystals through pairing equally shaped mesogenic cations and anions

The synthesis and properties of a set of novel ionic liquid crystals with congruently shaped cations and anions are reported to check whether pairing mesogenic cations with mesogenic anions leads to a stabilization of a liquid crystalline phase. To that avail 1-alkyl-3-methyl-triazolium cations with an alkyl chain length of 10, 12, and 14 carbon atoms have been combined with p-alkyloxy-benzenesulfonate anions with different alkyl chain lengths (n = 10, 12, and 14). The corresponding triazolium iodides have been synthesized as reference compounds where the cation and anion have strong size and shape mismatch. The mesomorphic behavior of all compounds is studied by differential scanning calorimetry and polarizing optical microscopy. All compounds except 1-methyl-3-decyltriazolium iodide, which qualifies as an ionic liquid, are thermotropic ionic liquid crystals. All other compounds adopt smectic A phases. As a result, a comparison of the thermal phase behavior of the 1-methyl-3-decyltriazolium bromides to the corresponding p-alkoxy-benzensulfonates reveals that definitely the mesophase is stabilized by pairing the rod-shaped 1-alkyl-3-methyltriazolium cation with a rod-like anion of similar size.

36 MATERIALS SCIENCE↗

Molecular Cage Reports on Its Contents: Spectroscopic Signatures of Cryo-Cooled K + - and Ba 2+ -Benzocryptand Complexes

UV photofragment spectroscopy and IR–UV double resonance methods are used to determine the structure and spectroscopic responses of a three-dimensional [2.2.2]-benzocryptand cage to the incorporation of a single K + or Ba 2+ imbedded inside it (labeled as K + -BzCrypt, Ba 2+ -BzCrypt). We studied the isolated ion-cryptand complex under cryo-cooled conditions, brought into the gas phase by nano-electrospray ionization. Incorporation of a phenyl ring in place of the central ethyl group in one of the three N-CH 2 -CH 2 -O-CH 2 -CH 2 -O-CH 2 -CH 2 -N chains provides a UV chromophore whose S 0 –S 1 transition we probe. K + -BzCrypt and Ba 2+ -BzCrypt have their S 0 –S 1 origin transitions at 35,925 and 36,446 cm –1 , respectively, blue-shifted by 174 and 695 cm –1 from that of 1,2-dimethoxybenzene. These origins are used to excite a single conformation of each complex selectively and record their IR spectra using IR–UV dip spectroscopy. The alkyl CH stretch region (2800–3000 cm –1 ) is surprisingly sensitive to the presence and nature of the encapsulated ion. We carried out an exhaustive conformational search of cage conformations for K + -BzCrypt and Ba 2+ -BzCrypt, identifying two conformations (A and B) that lie below all others in energy. Here, we extend our local mode anharmonic model of the CH stretch region to these strongly bound ion-cage complexes to predict conformation-specific alkyl CH stretch spectra, obtaining quantitative agreement with experiment for conformer A, the gas-phase global minimum. The large electrostatic effect of the charge on the O- and N-lone pairs affects the local mode frequencies of the CH 2 groups adjacent to these atoms. The localized CH 2 scissors modes are pushed up in frequency by the adjacent O/N-atoms so that their overtones have little effect on the alkyl CH stretch region. However, the localized CH 2 wags are nearly degenerate and strongly coupled to one another, producing an array of delocalized wag normal modes, whose highest frequency members reach up above 1400 cm –1 . As such, their overtones mix significantly with the CH stretch modes, most notably involving the CH 2 symmetric stretch fundamentals of the central ethyl groups in the all-alkyl chains and the CH stretches adjacent to the N-atoms and antiperiplanar to the nitrogen lone pair.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined Experimental and Computational Study on the Unimolecular Decomposition of JP-8 Jet Fuel Surrogates. I. n-Decane (n-C 10 H 22 )

Exploiting a high temperature chemical reactor, we explored in this paper the pyrolysis of helium-seeded n-decane as a surrogate of the n-alkane fraction of Jet Propellant-8 (JP-8) over a temperature range of 1100–1600 K at a pressure of 600 Torr. The nascent products were identified in situ in a supersonic molecular beam via single photon vacuum ultraviolet (VUV) photoionization coupled with a mass spectroscopic analysis of the ions in a reflectron time-of-flight mass spectrometer (ReTOF). Our studies probe, for the first time, the initial reaction products formed in the decomposition of n-decane—including radicals and thermally labile closed-shell species effectively excluding mass growth processes. The present study identified 18 products: molecular hydrogen (H 2 ), C2 to C7 1-alkenes [ethylene (C 2 H 4 ) to 1-heptene (C 7 H 14 )], C1–C3 radicals [methyl (CH 3 ), vinyl (C 2 H 3 ), ethyl (C 2 H 5 ), propargyl (C 3 H 3 ), allyl (C 3 H 5 )], small C1–C3 hydrocarbons [methane (CH 4 ), acetylene (C 2 H 2 ), allene (C 3 H 4 ), methylacetylene (C 3 H 4 )], along with higher-order reaction products [1,3-butadiene (C 4 H 6 ), 2-butene (C 4 H 8 )]. On the basis of electronic structure calculations, n-decane decomposes initially by C–C bond cleavage (excluding the terminal C–C bonds) producing a mixture of alkyl radicals from ethyl to octyl. These alkyl radicals are unstable under the experimental conditions and rapidly dissociate by C–C bond β-scission to split ethylene (C 2 H 4 ) plus a 1-alkyl radical with the number of carbon atoms reduced by two and 1,4-, 1,5-, 1,6-, or 1,7-H shifts followed by C–C β-scission producing alkenes from propene to 1-octene in combination with smaller 1-alkyl radicals. The higher alkenes become increasingly unstable with rising temperature. When the C–C β-scission continues all the way to the propyl radical (C 3 H 7 ), it dissociates producing methyl (CH 3 ) plus ethylene (C 2 H 4 ). Also, at higher temperatures, hydrogen atoms can abstract hydrogen from C 10 H 22 to yield n-decyl radicals, while methyl (CH 3 ) can also abstract hydrogen or recombine with hydrogen to form methane. Finally, these n-decyl radicals can decompose via C–C-bond β-scission to C3 to C9 alkenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined Experimental and Computational Study on the Unimolecular Decomposition of JP-8 Jet Fuel Surrogates. II: n-Dodecane (n-C 12 H 26 )

In this paper, we investigated temperature-dependent products in the pyrolysis of helium-seeded n-dodecane, which represents a surrogate of the n-alkane fraction of Jet Propellant-8 (JP-8) aviation fuel. The experiments were performed in a high temperature chemical reactor over a temperature range of 1200 K to 1600 K at a pressure of 600 Torr, with in situ identification of the nascent products in a supersonic molecular beam using single photon vacuum ultraviolet (VUV) photoionization coupled with the analysis of the ions in a reflectron time-of-flight mass spectrometer (ReTOF). For the first time, the initial decomposition products of n-dodecane—including radicals and thermally labile closed-shell species—were probed in experiments, which effectively exclude mass growth processes. A total of 15 different products were identified, such as molecular hydrogen (H 2 ), C2 to C7 1-alkenes [ethylene (C 2 H 4 ) to 1-heptene (C 7 H 14 )], C1–C3 radicals [methyl (CH 3 ), ethyl (C 2 H 5 ), allyl (C 3 H 5 )], small C1–C3 hydrocarbons [acetylene (C 2 H 2 ), allene (C 3 H 4 ), methylacetylene (C 3 H 4 )], as well as the reaction products [1,3-butadiene (C 4 H 6 ), 2-butene (C 4 H 8 )] attributed to higher-order processes. Electronic structure calculations carried out at the G3(CCSD,MP2)//B3LYP/6-311G(d,p) level of theory combined with RRKM/master equation of rate constants for relevant reaction steps showed that n-dodecane decomposes initially by a nonterminal C–C bond cleavage and producing a mixture of alkyl radicals from ethyl to decyl with approximately equal branching ratios. The alkyl radicals appear to be unstable under the experimental conditions and to rapidly dissociate either directly by C–C bond β-scission to produce ethylene (C 2 H 4 ) plus a smaller 1-alkyl radical with the number of carbon atoms diminished by two or via 1,5-, 1,6-, or 1,7- 1,4-, 1,9-, or 1,8-H shifts followed by C–C β-scission producing alkenes from propene to 1-nonene together with smaller 1-alkyl radicals. The stability and hence the branching ratios of higher alkenes decrease as temperature increases. The C–C β-scission continues all the way to the propyl radical (C 3 H 7 ), which dissociates to methyl (CH 3 ) plus ethylene (C 2 H 4 ). Finally, in addition, at higher temperatures, another mechanism can contribute, in which hydrogen atoms abstract hydrogen from C 12 H 26 producing various n-dodecyl radicals and these radicals then decompose by C–C bond β-scission to C3 to C11 alkenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

UCST-Type Thermoresponsive Polymers in Synthetic Lubricating Oil Polyalphaolefin (PAO)

Here, this article reports a family of UCST-type thermoresponsive polymers, poly(alkyl methacrylate)s with an appropriate alkyl pendant length, in an industrially important non-volatile organic liquid polyalphaolefin (PAO). The cloud point (CP) can be readily tuned over a wide temperature range by changing the alkyl pendant length; at a concentration of 1 wt% and similar polymer molecular weights, the CP varies linearly with the (average) number of carbon atoms in the alkyl pendant. PAO solutions of ABA triblock copolymers, composed of a PAO-philic middle block and thermoresponsive outer blocks with appropriate block lengths, undergo thermoreversible sol-gel transitions at sufficiently high concentrations. The discovery of thermoresponsive polymers in PAO makes it possible to explore new applications by utilizing PAO’s unique characteristics such as thermal stability, non-volatility, superior lubrication properties, etc. Lastly, two examples are presented: thermoresponsive physical gels for control of optical transmittance and injectable gel lubricants.

36 MATERIALS SCIENCE↗

Phosphonium-Organophosphate Ionic Liquids as Lubricant Additives: Effects of Cation Structure on Physicochemical and Tribological Characteristics

In our previous work we suggest great potential for a phosphonium-organophosphate ionic liquid (IL) as an antiwear lubricant additive. In this study, a set of five ILs were carefully designed and synthesized, with identical organophosphate anions but dissimilar phosphonium cations, to allow systematic investigation of the effects of cation alkyl chain length and symmetry on physicochemical and tribological properties. Symmetric cations with shorter alkyl chains seem to increase the density and thermal stability due to closer packing. On the other hand, either higher cation symmetry or longer alkyl moieties induce a higher viscosity, though the viscosity index is dependent more on molecular mass than on symmetry. While a larger cation size generally increases an IL’s solubility in nonpolar hydrocarbon oils, six-carbon seems to be the critical minimum alkyl chain length for high oil miscibility. Both the two ILs, that are mutually oil miscible, have demonstrated promising lubricating performance at 1.04% treat rate, though the symmetric-cation IL moderately outperformed the asymmetric-cation IL. Moreover, characterizations on the tribofilm formed by the best-performing symmetric-cation IL revealed the film thickness, nanostructure, and chemical composition. Our results provide fundamental insights for future molecular design in developing oil-soluble ILs as lubricant additives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Importance of Solubilizing Group and Backbone Planarity in Low Band Gap Polymers for High Performance Ambipolar field-effect Transistors

We investigated the performance of ambipolar field-effect transistors based on a series of alternating low band gap polymers of oligothiophene and diketopyrrolopyrrole (DPP). The polymers contain oligothiophene units of terthiophene [T3] and thiophene-thienothiophene-thiophene [T2TT] and DPP units carrying branched alkyl chains of 2-hexyldecyl [HD] or 2-octyldodecyl [OD]. The structural variation allows us to do a systematic study on the relationship between the interchain stacking/ordering of semiconducting polymers and their resulting device performance. On the basis of synchrotron X-ray diffraction and atomic force microscopy measurements on polymer films, we found that longer branched alkyl side chains, i.e., OD, and longer and more planar oligothiophene, i.e., T2TT, generate the more crystalline structures. Upon thermal annealing, the crystallinity of the polymers was largely improved, and polymers containing a longer branched alkyl chain responded faster because longer alkyl chains have larger cohesive forces than shorter chains. For all the polymers, excellent ambipolar behavior was observed with a maximum hole and electron mobility of 2.2 and 0.2 cm{sup 2} V{sup -1} s{sup -1}, respectively.

36 MATERIALS SCIENCE↗

Secondary Amine Functional Disiloxanes as CO2 Sorbents

A series of two different types of secondary amine functional disiloxanes were prepared and screened as CO2 capture solvents. The first group of materials contained RNHCH2CH2CH2 side chains where the R groups were C1-6 alkyls. When R was a primary alkyl group, these materials exhibited CO2 uptake values slightly in excess of theoretical. As the alkyl groups were changed to more sterically hindered secondary or tertiary alkyls, the uptake was less efficient. Heats of absorption values for these materials were generally in the range 2000-2200 kJ/kg of CO2, values significantly lower than those obtained for primary amine functional disiloxanes (2500-2700 kJ/kg of CO2). Also explored were a series of secondary amine functional disiloxanes with X-CH2CH2NH-CH2CH2CH2 - substituents. When X was an electron-donating group (RO-, R2N-, RO-CH2-) the CO2 uptake was also in excess of theoretical. Interestingly, these compounds were generally found to produce carbamate salts that were flowable, low-viscosity oils. Furthermore, the heat of absorption values determined for these materials were even lower. Most compounds gave values below 2000 kJ/kg of CO2. Overall the most promising results were obtained with a methoxyethylaminopropyl derivative, an ethoxyethylaminopropyl-containing material, and a dimethylaminoethylaminopropyl-based compound. These materials showed excellent CO2 uptake, had low heats of absorption, and produced carbamate salts that were flowable liquids even at room temperature.

O'Brien, MJ↗

Tunable Cr 4+ Molecular Color Centers

The inherent atomistic precision of synthetic chemistry enables bottom-up structural control over quantum bits, or qubits, for quantum technologies. Tuning paramagnetic molecular qubits that feature optical-spin initialization and readout is a crucial step toward designing bespoke qubits for applications in quantum sensing, networking, and computing. In this work, we demonstrate that the electronic structure that enables optical-spin initialization and readout for S = 1, Cr(aryl) 4 , where aryl = 2,4-dimethylphenyl (1), o-tolyl (2), and 2,3-dimethylphenyl (3), is readily translated into Cr(alkyl) 4 compounds, where alkyl = 2,2,2-triphenylethyl (4), (trimethylsilyl)methyl (5), and cyclohexyl (6). The small ground state zero field splitting values (<5 GHz) for 1–6 allowed for coherent spin manipulation at X-band microwave frequency, enabling temperature-, concentration-, and orientation-dependent investigations of the spin dynamics. Electronic absorption and emission spectroscopy confirmed the desired electronic structures for 4–6, which exhibit photoluminescence from 897 to 923 nm, while theoretical calculations elucidated the varied bonding interactions of the aryl and alkyl Cr 4+ compounds. The combined experimental and theoretical comparison of Cr(aryl) 4 and Cr(alkyl) 4 systems illustrates the impact of the ligand field on both the ground state spin structure and excited state manifold, laying the groundwork for the design of structurally precise optically addressable molecular qubits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactions of Polar and Nonpolar Groups of Alcohols in Zeolite Pores

Understanding the quantitative interactions among zeolite pore walls, Bro̷nsted acid sites, and molecules with both polar and nonpolar regions is essential for scoping out the potential of zeolites as sorbents and catalysts. Purely siliceous zeolites (MFI and Beta in the present study) are hydrophobic, whereas those containing aluminum are considered hydrophilic, preferentially adsorbing organic molecules even in aqueous environments. To characterize these interactions, we use primary alcohols of increasing molecular weight, quantifying their specific interactions in the confined pore space of the alkyl (CH x ) and OH groups. Three types of interactions were identified: (i) alkyl CH x groups interacting with the zeolite pore walls (approximately 10 kJ mol −1 per carbon), (ii) alcohol OH groups interacting with the pore walls (30−35 kJ mol −1 ), and (iii) alcohol OH groups interacting with Bro̷nsted acid sites (37 kJ mol −1 ). All three interactions were well mirrored by computational simulations. The contribution of the alkyl CH x groups was inferred from the incremental increase in sorption enthalpy with increasing molecular weight; the interaction strength of the OH groups was determined by extrapolating the global adsorption enthalpy of the alcohols to a hypothetical OH group without an alkyl group. This value was identical to the adsorption enthalpy of water. The experiments demonstrated that only water has an adsorption enthalpy on zeolite pore walls lower than its condensation enthalpy (30−35 kJ mol −1 vs 45 kJ mol −1 ), limiting the concentration of water that can be adsorbed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Computational Study of Dicationic Ionic Liquids/CO 2 Interfaces

Our recent studies on CO 2 capture using dicationic ionic liquids (DILs) demonstrated that DILs are promising absorbents for CO 2 uptake especially compared with monocationic ionic liquids (MILs) analogues, in which each cation carries single positive charge in contrast to two unit charges of a dication. However, DILs/CO 2 interfacial properties at the molecular level are still unknown. This work investigated the CO 2 absorption properties of representative DILs, 1-alkyl-3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide, [C n (mim) 2 ](Tf 2 N) 2 (n = 3, 6, 12), using molecular dynamics (MD) simulations. The higher interfacial CO 2 density at DIL than that at MIL interfaces suggests the increased CO 2 interaction sites in DILs. The interfacial CO 2 density also exhibits an alkyl chain length dependence which decreases with the elongation of alkyl chain and proportionally correlates with the content of fluorine atoms at interfaces. Different alkyl chain orientations in DILs were illustrated in contrast to those of MILs; both DILs and CO2 inside DILs exhibit lower diffusivity than MILs, in agreement with the stronger cation–anion binding energy of DILs. Moreover, DILs show a lower H2O and N2 uptake from flue gas compared with MILs, implicating the higher CO 2 /H 2 O and CO 2 /N 2 selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphological Phase Behavior of Poly(RTIL)-Containing Diblock Copolymer Melts

The development of nanostructured polymeric systems containing directionally continuous poly(ionic liquid) (poly(IL)) domains has considerable implications toward a range of transport-dependent, energy-based technology applications. The controlled, synthetic integration of poly(IL)s into block copolymer (BCP) architectures provides a promising means to this end, based on their inherent ability to self-assemble into a range of defined, periodic morphologies. In this work, we report the melt-state phase behavior of an imidazolium-containing alkyl-ionic BCP system, derived from the sequential ring-opening metathesis polymerization (ROMP) of imidazolium- and alkyl-substituted norbornene monomer derivatives. A series of 16 BCP samples were synthesized, varying both the relative volume fraction of the poly(norbornene dodecyl ester) block (f{sub DOD} = 0.42-0.96) and the overall molecular weights of the block copolymers (M{sub n} values from 5000-20,100 g mol{sup -1}). Through a combination of small-angle X-ray scattering (SAXS) and dynamic rheology, we were able to delineate clear compositional phase boundaries for each of the classic BCP phases, including lamellae (Lam), hexagonally packed cylinders (Hex), and spheres on a body-centered-cubic lattice (S{sub BCC}). Additionally, a liquid-like packing (LLP) of spheres was found for samples located in the extreme asymmetric region of the phase diagram, and a persistent coexistence of Lam and Hex domains was found in lieu of the bicontinuous cubic gyroid phase for samples located at the intersection of Hex and Lam regions. Thermal disordering was opposed even in very low molecular weight samples, detected only when the composition was highly asymmetric (f{sub DOD} = 0.96). Annealing experiments on samples exhibiting Lam and Hex coexistence revealed the presence of extremely slow transition kinetics, ultimately selective for one or the other but not the more complex gyroid phase. In fact, no evidence of the bicontinuous network was detected over a 2 month annealing period. The ramifications of these results for transport-dependent applications targeting the use of highly segregated poly(IL)-containing BCP systems are carefully considered.

36 MATERIALS SCIENCE↗