Search NASA⌕ Search

SEARCH · Search NASA

Results for “Amorphous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Phonon renormalization and Raman spectral evolution through amorphous to crystalline transitions in Sb{sub 2}Te{sub 3} thin films

A symmetry specific phonon mode renormalization is observed across an amorphous to crystalline phase transformation in thin films of the topological material Sb{sub 2}Te{sub 3} using Raman spectroscopy. We present evidence for local crystalline symmetry in the amorphous state, eventhough, the q = 0 Raman selection rule is broken due to strong structural disorder. At crystallization, the in-plane polarized (E{sub g}{sup 2}) mode abruptly sharpens while the out-of-plane polarized (A{sub 1g}) modes are only weakly effected. This effect unique to the E{sub g} symmetry is exceptional considering that polarized spectra and comparison of the single phonon density of states between the amorphous and crystalline phases suggest that short range order of the amorphous phase is, on the average, similar to that of the crystalline material while electrical transport measurements reveal a sharp insulator-to-metal transition. Our findings point to the important role of anisotropic disorder affecting potential applications of topological and phase-change based electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure behavior of amorphous selenium from ultrasonic measurements and Raman spectroscopy

The high-pressure behavior of melt-quenched amorphous selenium (a-Se) has been investigated via ultrasonic measurements and Raman scattering at room temperature. The ultrasonic measurements were conducted on a-Se in a multi-anvil apparatus with two different sample assemblies at pressures of up to 4.5 and 4.8 GPa. We discovered that similar kinks occur in the slopes of the pressure dependence characteristics of the travel time and the sound velocity in both shear and longitudinal waves in the 2.0–2.5 GPa range. These kinks are independent of the sample assemblies, indicating an intrinsic transformation of the a-Se. Additionally, we deduced the pressure-volume relationship of a-Se from the sound velocity characteristics using the Birch–Murnaghan equation of state, and the results agreed well with those of previous reports. In situ high-pressure Raman scattering measurements of a-Se were conducted in a diamond anvil cell with an 830 nm excitation line up to a pressure of 4.3 GPa. We found that the characteristic band of a-Se at ∼250 cm{sup −1} experienced a smooth shift to a lower frequency with pressure, but a sharp slope change in the band intensity versus pressure occurred near 2.5 GPa. The results of X-ray diffraction and differential scanning calorimetry measurements indicate that the samples remain in their amorphous states after decompression. Thus, we proposed that the abnormal compression behavior of a-Se in the 2.0–2.5 GPa range can be attributed to pressure-induced local atomic reconfiguration, implying an amorphous-amorphous transition of the elementary selenium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong enhancement in thermal conductivity of ethylene glycol-based nanofluids by amorphous and crystalline Al{sub 2}O{sub 3} nanoparticles

In the present work, the temperature and concentration dependence of thermal conductivity (TC) enhancement in ethylene glycol (EG)-based amorphous and crystalline Al{sub 2}O{sub 3} nanofluids have been investigated at temperatures ranging from 0 to 100 °C. In our prior study, nanometer-sized particles of amorphous-, γ-, and α-Al{sub 2}O{sub 3} were prepared via a simple sol-gel process with annealing at different temperatures and characterized by various techniques. Building upon the earlier study, we probe here the crystallinity, microstructure, and morphology of the obtained α-Al{sub 2}O{sub 3} nanoparticles (NPs) by using X-ray powder diffraction with Rietveld full-profile refinement, scanning electron microscopy, and high-resolution transmission electron microscopy, respectively. In this study, we achieved a 74% enhancement in TC at higher temperature (100 °C) of base fluid EG by incorporating 1.0 vol. % of amorphous-Al{sub 2}O{sub 3}, whereas 52% and 37% enhancement is accomplished by adding γ- and α-Al{sub 2}O{sub 3} NPs, respectively. The amorphous phase of NPs appears to have good TC enhancement in nanofluids as compared to crystalline Al{sub 2}O{sub 3}. In a nutshell, these results are demonstrating the potential consequences of Al{sub 2}O{sub 3} NPs for applications of next-generation efficient energy transfer in nanofluids.

36 MATERIALS SCIENCE↗

Photo-induced oxidation and amorphization of trigonal tellurium: A means to engineer hybrid nanostructures and explore glass structure under spatial confinement

Controlled photo-induced oxidation and amorphization of elemental trigonal tellurium are achieved by laser irradiation at optical wavelengths. These processes are monitored in situ by time-resolved Raman scattering and ex situ by electron microscopies. Ultrathin TeO₂ films form on Te surfaces, as a result of irradiation, with an interface layer of amorphous Te intervening between them. It is shown that irradiation, apart from enabling the controllable transformation of bulk Te to one-dimensional nanostructures, such as Te nanotubes and hybrid core-Te/sheath-TeO₂ nanowires, causes also a series of light-driven (athermal) phase transitions involving the crystallization of the amorphous TeO₂ layers and its transformation to a multiplicity of crystalline phases including the γ-, β-, and α-TeO₂ crystalline phases. The kinetics of the above photo-induced processes is investigated by Raman scattering at various laser fluences revealing exponential and non-exponential kinetics at low and high fluence, respectively. In addition, the formation of ultrathin (less than 10 nm) layers of amorphous TeO₂ offers the possibility to explore structural transitions in 2D glasses by observing changes in the short- and medium-range structural order induced by spatial confinement.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Perpendicular magnetic anisotropy of amorphous [CoSiB/Pt]{sub N} thin films

Materials with perpendicular magnetic anisotropy (PMA) have been intensively studied for high-density nonvolatile memory such as spin-transfer-torque magnetic random access memory with low switching current density and high thermal stability. Compared with crystalline PMA multilayers, considerable works have been done on amorphous PMA multilayers because the amorphous materials are expected to have lower pinning site density as well as smaller domain wall width. This study is an overview of the PMA properties of amorphous [CoSiB/Pt]{sub N} multilayers with varying N, where the energy contribution is changed from domain wall energy to magnetostatic energy around N = 6. By measuring the field-induced domain wall motion, we obtain the creep exponent of μ = 1/4. These results in the amorphous PMA multilayers of [CoSiB/Pt]{sub N} demonstrate possible potential as a free layer for PMA-based memory devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Possible existence of two amorphous phases of D-mannitol related by a first-order transition

We report that the common polyalcohol D-mannitol may have two amorphous phases related by a first-order transition. Slightly above its glass transition temperature T{sub g} (284 K), the supercooled liquid (SCL) of D-mannitol transforms to a low-energy, apparently amorphous phase with stronger hydrogen bonds. The enthalpy of this so-called Phase X is approximately halfway between those of the known amorphous and crystalline phases, a position low for glass aging and high for crystal polymorphs. Similar to the SCL, Phase X is transparent with broad X-ray diffraction and Raman scattering; upon temperature cycling, it exhibits a glass-transition-like change of heat capacity. On fast heating, Phase X transforms back to the SCL near T{sub g} + 50 K, enabling a determination of their equilibrium temperature. The presence of D-sorbitol as a plasticizer enables observation of a first-order transition from the SCL to Phase X entirely in the liquid state (liquid-liquid transition). The transition from D-mannitol’s SCL to Phase X has intriguing similarities with the formation of the glacial phase of triphenyl phosphite (TPP) and the conversion from high-density to low-density amorphous ice, both studied intensely in the context of polyamorphism. All three processes occur near T{sub g} with substantial enthalpy decrease toward the crystalline phases; the processes in water and D-mannitol both strengthen the hydrogen bonds. In contrast to TPP, D-mannitol’s Phase X forms more rapidly and can transform back to the SCL. These features make D-mannitol a valuable new model for understanding polyamorphism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid state amorphization of nanocrystalline nickel by cryogenic laser shock peening

In this study, complete solid state amorphization in nanocrystalline nickel has been achieved through cryogenic laser shock peening (CLSP). High resolution transmission electron microscopy has revealed the complete amorphous structure of the sample after CLSP processing. A molecular dynamic model has been used to investigate material behavior during the shock loading and the effects of nanoscale grain boundaries on the amorphization process. It has been found that the initial nanoscale grain boundaries increase the initial Gibbs free energy before plastic deformation and also serve as dislocation emission sources during plastic deformation to contribute to defect density increase, leading to the amorphization of pure nanocrystalline nickel.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An amorphous phase formation at palladium / silicon oxide (Pd/SiO{sub x}) interface through electron irradiation - electronic excitation process

A Pd-Si amorphous phase was formed at a palladium/silicon oxide (Pd/SiO{sub x}) interface at room temperature by electron irradiation at acceleration voltages ranging between 25 kV and 200 kV. Solid-state amorphization was stimulated without the electron knock-on effects. The total dose required for the solid-state amorphization decreases with decreasing acceleration voltage. This is the first report on electron irradiation induced metallic amorphous formation caused by the electronic excitation at metal/silicon oxide interface.

36 MATERIALS SCIENCE↗

First principles prediction of amorphous phases using evolutionary algorithms

We discuss the efficacy of evolutionary method for the purpose of structural analysis of amorphous solids. At present, ab initio molecular dynamics (MD) based melt-quench technique is used and this deterministic approach has proven to be successful to study amorphous materials. We show that a stochastic approach motivated by Darwinian evolution can also be used to simulate amorphous structures. Applying this method, in conjunction with density functional theory based electronic, ionic and cell relaxation, we re-investigate two well known amorphous semiconductors, namely silicon and indium gallium zinc oxide. We find that characteristic structural parameters like average bond length and bond angle are within ∼2% of those reported by ab initio MD calculations and experimental studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamically controlled crystallization of glucose pentaacetates from amorphous phase

The α and β glucose pentaacetates are known sugar derivatives, which can be potentially used as stabilizers of amorphous phase of active ingredients of drugs (API). In the present work, crystallization behavior of equimolar mixture of α and β form in comparison to both pure anomers is revealed. It was shown that despite the same molecular interactions and similar molecular dynamics, crystallization from amorphous phase is significantly suppressed in equimolar mixture. Time dependent X-ray diffraction studies confirmed higher stability of the quenched amorphous equimolar mixture. Its tendency to crystallization is about 10 times lower than for pure anomers. Calorimetric studies revealed that the α and β anomers don’t form solid solutions and have eutectic point for x{sub α} = 0.625. Suppressed crystallization tendency in the mixture is probably caused by the altered thermodynamics of the system. The factors such as difference of free energy between crystalline and amorphous state or altered configurational entropy are probably responsible for the inhibitory effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ TEM study of the transitions between crystalline Si and nonstoichiometric amorphous oxide under bipolar voltage bias

The electrical responses, either structurally or chemically, at the interface between a SiO 2 thin film and a single crystalline Si substrate are an important research subject in Si-based devices. Dielectric breakdown-induced epitaxial migration of Si into SiO 2 has been reported as a degradation mechanism in field effect transistors (FETs). Here, we show a direct observation of electric field induced conversion of single crystalline Si to nonstoichiometric amorphous oxide starting from the Si/native oxide interface using in situ transmission electron microscopy (TEM). We further show that nanocrystalline Si can form in the amorphous oxide under a voltage bias of reversed polarity. Electron energy loss spectroscopy and energy dispersive X-ray spectroscopy analyses indicate that the observed amorphization process was caused by the oxidation of Si and the recrystallization process was caused by the reduction of nonstoichiometric amorphous silicon oxide. Furthermore, both transitions are a result of field-driven directional migration of oxygen which originally comes from its native oxide layer.

36 MATERIALS SCIENCE↗

Effects of carbon concentration on the local atomic structure of amorphous GST

Ge-Sb-Te (GST) alloys are leading phase-change materials for data storage due to the fast phase transition between amorphous and crystalline states. Ongoing research aims at improving the stability of the amorphous phase to improve retention. This can be accomplished by the introduction of carbon as a dopant to Ge 2 Sb 2 Te 5 , which is known to alter the short- and mid-range structure of the amorphous phase and form covalently bonded C clusters, both of which hinder crystallization. The relative importance of these processes as a function of C concentration is not known. Here we used molecular dynamics simulation based on density functional theory to study how carbon doping affects the atomic structure of GST-C. Carbon doping results in an increase in tetrahedral coordination, especially of Ge atoms, and this is known to stabilize the amorphous phase. We observe an unexpected, non-monotonous trend in the number of tetrahedral bonded Ge with the amount of carbon doping. Our simulations show an increase in the number of tetrahedral bonded Ge up to 5 at.% C, after which the number saturates and begins to decrease above 14 at.% C. The carbon atoms aggregate into clusters, mostly in the form of chains and graphene flakes, leaving less carbon to disrupt the GST matrix at higher carbon concentrations. Different degrees of carbon clustering can explain divergent experimental results for recrystallization temperature for carbon doped GST.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduction experiment of FeO-bearing amorphous silicate: application to origin of metallic iron in GEMS

Glass with embedded metal and sulfides (GEMS) are amorphous silicates included in anhydrous interplanetary dust particles (IDPs) and can provide information about material evolution in our early solar system. Several formation processes for GEMS have been proposed so far, but these theories are still being debated. To investigate a possible GEMS origin by reduction of interstellar silicates, we synthesized amorphous silicates with a mean GEMS composition and performed heating experiments in a reducing atmosphere. FeO-bearing amorphous silicates were heated at 923 K and 973 K for 3 hr, and at 1023 K for 1-48 hr at ambient pressure in a reducing atmosphere. Fe grains formed at the interface between the silicate and the reducing gas through a reduction. In contrast, TEM observations of natural GEMS show that metallic grains are uniformly embedded in amorphous silicates. Therefore, the present study suggests that metallic inclusions in GEMS could not form as reduction products and that other formation process such as condensation or irradiation are more likely.

36 MATERIALS SCIENCE↗

Role of atomic-level defects and electronic energy loss on amorphization in LiNbO 3 single crystals

Understanding complex non-equilibrium defect processes, where multiple irradiation mechanisms may take place simultaneously, is a long standing subject in material science. The separate and combined effects of elastic and inelastic energy loss are a very complicated and challenging topic. In this work, LiNbO 3 has been irradiated with 0.9 MeV Si + and 8 MeV O 3+ , which are representative of regimes where nuclear (S n ) and electronic (S e ) energy loss are dominant, respectively. The evolution of damage has been investigated by Rutherford backscattering spectrometry (RBS) in channeling configuration. Pristine samples were irradiated with 0.9 MeV Si + ions to create different pre-existing damage states. Below the threshold (S e,th = 5–6 keV nm –1 ) for amorphous track formation in this material, irradiation of the pristine samples with a highly ionizing beam of 8 MeV O 3+ ions, with nearly constant S e of about 3 keV nm –1 , induces a crystalline to amorphous phase transition at high ion fluences. In the pre-damaged samples, the electronic energy loss from the 8 MeV O 3+ ions interacts synergistically with the pre-existing damage, resulting in a rapid, non-linear increase in damage production. There is a significant reduction in the incubation fluence for rapid amorphization with the increasing amount of pre-existing damage. Here, these results highlight the important role of atomic-level defects on increasing the sensitivity of some oxides to amorphization induced by electronic energy loss. Controlling the nature and amount of pre-damage may provide a new approach to tuning optical properties for photonic device applications.

36 MATERIALS SCIENCE↗

Li-ion battery material under high pressure: amorphization and enhanced conductivity of Li 4 Ti 5 O 12

Lithium titanium oxide (Li 4 Ti 5 O 12 , LTO), a 'zero-strain' anode material for lithium-ion batteries, exhibits excellent cycling performance. However, its poor conductivity highly limits its applications. Here, the structural stability and conductivity of LTO were studied using in situ high-pressure measurements and first-principles calculations. LTO underwent a pressure-induced amorphization (PIA) at 26.9 GPa. The impedance spectroscopy revealed that the conductivity of LTO improved significantly after amorphization and that the conductivity of decompressed amorphous LTO increased by an order of magnitude compared with its starting phase. Furthermore, our calculations demonstrated that the different compressibility of the LiO 6 and TiO 6 octahedra in the structure was crucial for the PIA. The amorphous phase promotes Li + diffusion and enhances its ionic conductivity by providing defects for ion migration. Our results not only provide an insight into the pressure depended structural properties of a spinel-like material, but also facilitate exploration of the interplay between PIA and conductivity.

25 ENERGY STORAGE↗

X-ray Studies of the Transformation from High-to Low-density Amorphous Water

Here we report about the structural evolution during the conversion from high-density amorphous ices at ambient pressure to the low-density state. Using high-energy X-ray diffraction we have monitored the transformation by following in reciprocal space the structure factor SOO(Q) and derive in real space the pair distribution function gOO(r). Heating equilibrated high-density amorphous ice (eHDA) at a fast rate (4 K/min), the transition to the low-density form occurs very rapidly, while domains of both high- and low-density coexist. On the other hand, the transition in the case of unannealed HDA (uHDA) and very-high-density amorphous ice (VHDA) is more complex and of continuous nature. The direct comparison of eHDA and uHDA indicates that the molecular structure of uHDA contains a larger amount of tetrahedral motives. The different crystallization behavior of the derived low-density amorphous (LDA) states is interpreted as emanating from an increased tetrahedral coordination present in uHDA.

amorphous ice↗

Structural and mechanical properties of monolayer amorphous carbon and boron nitride

Amorphous materials exhibit various characteristics that are not featured by crystals and can sometimes be tuned by their degree of disorder (DOD). Here, we report results on the mechanical properties of monolayer amorphous carbon (MAC) and monolayer amorphous boron nitride (maBN) with different DOD. The pertinent structures are obtained by kinetic-Monte-Carlo (kMC) simulations using machine-learning potentials (MLP) with density-functional-theory (DFT)-level accuracy. An intuitive order parameter, namely the areal fraction F x occupied by crystallites within the continuous random network, is proposed to describe the DOD. We find that F x captures the essence of the DOD: Samples with the same F x but different sizes and arrangements of crystallites, obtained using two distinct kMC procedures, have virtually identical radial distributions functions as well as bond-length and bond-angle distributions. Furthermore, by simulating the fracture process with molecular dynamics, we found that the mechanical responses of MAC and maBN before fracture are mainly determined by F x and are insensitive to the sizes and specific arrangements and to some extent the numbers and area distributions of the crystallites. The behavior of cracks in the two materials is analyzed and found to mainly propagate in meandering paths in the CRN region and to be influenced by crystallites in distinct ways that toughen the material. Furthermore, the present results reveal the relation between structure and mechanical properties in amorphous monolayers and may provide a universal toughening strategy for 2D materials.

2-dimensional systems↗

Flowing damage in ion-implanted amorphous silicon

Using molecular-dynamics simulations, we have studied the creation and evolution of damage in crystalline and amorphous silicon following the implantation of energetic keV ions. A method is proposed to identify anomalous atoms based on a weighted combination of local, atomic-scale properties, which applies to both Si phases. For crystalline Si, the passage of the ions causes compact amorphous regions to form, while no evidence for melting is observed. The relaxation of the amorphouslike regions proceeds initially by the rapid recrystallization of smaller clusters and isolated atoms, followed by a long period of steplike changes in the number of defects due to spontaneous annealing of damage pockets at the crystalline-amorphous interface. In amorphous Si, the initial stage of damage annealing (which lasts a few picoseconds) resembles closely that observed in crystalline Si; on larger time scales, however, the damage is found to ''percolate,'' or flow, through the system, inducing damage away from the collision cascade, thus causing an overall ''derelaxation'' of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗