Search NASA⌕ Search

SEARCH · Search NASA

Results for “BALLISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1962

RE-ENTRY MATERIALS

The major requirement for a re-entry material is that it protect the vehicle from the aerodynamic heating associated with re-entry. A relatively short time ago, the term re-entry brought to mind a ballistic type trajectory and its characteristic heat pulse. Today, however, a variety of thermal re-entry conditions are common due to the various types of vehicles currently of interest. Extremes of re-entry heating-time conditions vary from the relatively low heat flux-long time pulse associated with glide and shallow orbital re-entries through high flux-short time ballistic re-entry to the very high heat flux-moderate time pulse associated with super orbital re-entry. Materials for providing thermal protection, therefore, vary considerably depending upon the type of reentry heat-time pulse. From a functional standpoint, thermal protection materials may be divided into two types; absorptive and radiative. The absorptive material dissipates heat by storage (heat sink) or mass transfer and chemical change (ablation, transpiration or sublimation).

Thermal protection↗
NASA NTRS1962

Simplified Free-Flight Testing in a Conventional Wind Tunnel

In order to incorporate the advantages of ballistic range testing with the convenience of wind tunnel testing, simplified techniques have been developed at the Jet Propulsion Laboratory (JPL) for free-flight testing of models in a conventional wind tunnel. So far, only a small number of the many possibilities have been investigated, but the preliminary results indicate that such techniques are both practical and useful. The model to be investigated is suspended on a single traverse wire at the upstream end of the test section window, then is released from this position by causing the wire to break within the model. High speed motion pictures taken of the model oscillating during its travel across the viewing area make it possible to determine various aerodynamic parameters such as drag, lift, pitching moment, and pitch damping in much the same manner as is done in ballistic range testing. Also, a spark schlieren photograph can be taken of the model in flight in order to observe details of an undisturbed (from support interference) wake.

FREE FLIGHT↗
NASA NTRS1958

The Explorer Rocket Research Program

Since September of 1956, nine Jupiter-C missiles have been launched from the firing pad at Cape Canaveral. The first Jupiter-C firing tested the propulsion system, air frame, and guidance components of the missile, and the second and third firings tested a model of the Jupiter nose cone under realistic re-entry conditions. The remaining six Jupiter-C missiles were used as the launching vehicles for EXPLORER satellites I through VI (Fig. 1). Of the six satellite firings, EXPLORERs I, III, and IV achieved satisfactory orbits. The Jupiter-C missile was designed and developed as a joint program under the technical direction of the Jet Propulsion Laboratory and the Army Ballistic Missile Agency. The Jet Propulsion Laboratory developed the three high-speed stages, and the Army Ballistic Missile Agency handled the development, construction, and operation of the first-stage booster rocket and the guidance system. Many other organizations have contributed to the success of the EXPLORER satellite program, most notably the State University of Iowa, the Air Force Cambridge Research Center, and the satellite tracking teams of the Vanguard organization.

Robillard, G.↗
NASA NTRS1963

Vehicle Design for Mars Landing and Return to Mars Orbit

This paper briefly describes three modes for accomplishing the Mars landing mission and compares them on a gross basis to indicate their probable order of merit and to identify design requirements placed on the Mars-excursion module (MEM) by the choice of mode. The paper shows that a flyby-rendezvous mode requiring low weight in earth orbit requires the MEM to enter the Mars atmosphere at velocities ranging from 20,000 to 30,000 ft/sec. The MEM for the flyby-rendezvous mode is not covered in this paper but merits further study. The MEM for the other modes of mission accomplishment begins its active operational sequence in Mars orbit and need not be greatly influenced by the method of delivery to Mars orbit. Parametric studies of the entry problem for two vehicles typifying a ballistic-type and a lifting-body-type were conducted to identify the problems associated with design of a MEM to accommodate the extremes of Mars atmospheric density presently predicted. This brief study indicates that: (a) the presently predicted density extremes of the Mars atmosphere present no serious design problems for a MEM which can operate across the entire band of predicted densities; (b) details of operational requirements and mission objectives will control the choice of configuration rather than entry requirements; and (c) the ballistic-type MEM is lighter and simpler but has less operational flexibility than a high L/D MEM.

Hammock, D. M.↗
NASA NTRS1972

Longitudinal dynamic stability of a shuttle vehicle.

Analytical study of the longitudinal dynamic stability of a nonrolling, lifting vehicle gliding at hypersonic speeds. The analysis applies to shuttle vehicles designed for operating up to the rim of a planetary atmosphere. A general nondimensional time transformation is introduced to derive a unified second-order linear differential equation for the angle of attack, valid for all types of reentry of a general type of vehicle. The stability of motion is discussed for two fundamental regimes of flight that are based on widely different assumptions. For near ballistic entry along a straight line trajectory, the equation reduces to a confluent hypergeometric equation, the solution of which can be expressed in terms of Whittaker's function. Using a theorem in the theory of stability of differential equations, criteria for damped oscillations are derived. It is shown that the aerodynamic criteria for stability are the same as for the case of ballistic entry. In addition, for each vehicle configuration, and specified planetary atmosphere, there exists an altitude range where the angle of attack frequency is nearly equal to the orbital frequency causing instability in pitch. This resonance instability is due to the ellipticity of the orbit. Criteria for eccentricity instability are derived.

Vinh, N. X.↗
NASA NTRS1972

Examination of the influence of coatings on thin superalloy sections

The effects of two coatings, Codep B-1 and CoCrAlY, with and without simulated engine exposures at 982 C (1800 F) and 1093 C (2000 F), were evaluated on cast sections of Rene 80. Section thicknesses were from 0.075 cm (0.030 inch) to 0.15 cm (0.060 inch). Tensile and stress rupture properties, mechanical fatigue, thermal fatigue, ballistic impact and hot corrosion at R. T. and elevated temperatures were investigated. Thin sections generally had poorer tensile strengths and lower stress rupture lives than standard 1/4 inch round gage bars. The coatings, as-applied, had little effect on tensile strengths, rupture lives and mechanical fatigue and they increased thermal fatigue, ballistic impact and hot corrosion resistance. By providing considerable exposure protection to the Rene 80, the coatings improved all properties compared to exposed bare specimens.

Kaufman, M.↗
NASA NTRS1973

Atmosphere-entry behavior of a modular, disk-shaped, isotope heat source.

The authors have studied the entry and impact behavior of an isotope heat source for space nuclear power that disassembles into a number of modules which would enter the earth's atmosphere separately if a flight aborted. These modules are disk-shaped units, each with its own reentry heat shield and protective impact container. In normal operation, the disk modules are stacked inside the generator, but during a reentry abort they separate and fly as individual units of low ballistic coefficient. Flight tests at hypersonic speeds have confirmed that a stack of disks will separate and assume a flat-forward mode of flight. Free-fall tests of single disks have demonstrated a nominal impact velocity of 30 m/sec at sea level for a practical range of ballistic coefficients.

Vorreiter, J. W.↗
NASA NTRS1974

Cinder cone growth modeled after Northeast crater, Mount Etna, Sicily

The structure, physical properties of ejecta, ballistics, and growth of Northeast crater, a young pyroclastic cone that originated in 1911 near the summit of Mount Etna, Sicily, were studied in order to form a model of volcano cinder cone growth. Four stages of growth were discerned: (1) a simple cone; (2) a cone with an outward-dipping talus slope; (3) destruction of rounded rim by the inward migration of the upper edge of the talus pile; and (4) extension of limits of talus pile beyond the ballistic limit of ejecta trajectories. The model is used to predict the features of lunar and Martian cones, assuming that they erupted under conditions qualitatively similar to Etna's Northeast crater.

Mcgetchin, T. R.↗
NASA NTRS1975

Tests of protective clothing for the safe handling of pressurized lamps

Tests were made to find a clothing material combination for use in handling high-pressure lamps. Monofilament nylon, ballistic nylon, and ballistic felt grouped into various multilayer combinations and chromed leather were positioned around and 30 cm (12 in.) away from exploding high-pressure lamps of different manufacturers and wattages. The results are: (1) 5024 nylon/ballistic felt/5024 nylon in a layered configuration was not penetrated by fragments of lamps as large as 6.5 kW; (2) this layered combination is lightweight and pliable and offers greater mobility and comfort to the user than previous protective clothing; and (3) Lexan plastic 1.6 mm (1/6 in.) thick to be used for face shield material showed no penetration for lamps as large as 20 kW.

Ewashinka, J. G.↗
NASA NTRS1975

Design, Fabrication and Test of Multi-Fiber Laminates

Unidirectional and angleply multifiber laminates were tested for improved impact strength and other mechanical properties. The effects of several variables on the mechanical properties of epoxy matrix materials were described. These include fiber type (HMS and AS graphites, glass, and Kevlar 49), ratio of primary to hybridizing fiber and hybrid configuration. It is demonstrated that AS graphite/S glass in an intraply configuration results in the best combination of static and Charpy impact properties as well as superior ballistic impact resistance. Pendulum impact tests which were conducted on thin specimens are shown to produce different ranking of materials than tests conducted on standard thickness Charpy specimens. It is shown that the thin specimen results are in better agreement with the ballistic impact data. Additional static test data are reported as a function of temperature for the seven best hybrid configurations having epoxy, polyimide (PMR-15) and polyphenylquinoxaline resins as the matrix.

Pike, R. A.↗
NASA NTRS1975

Development of impact resistant boron/aluminum composites for turbojet engine fan blades

Composite fabrication was performed by vacuum press diffusion bonding by both the foil-filament array and preconsolidated monotape methods. The effect of matrix material, fiber diameter, matrix enhancement, fiber volume reinforcement, test temperature, angle-plying, notch, impact orientation, processing variables and fabrication methods on tensile strength and Charpy impact resistance are evaluated. Root attachment concepts, were evaluated by room and elevated temperature tensile testing, as well as by pendulum-Izod and ballistic impact testing. Composite resistance to foreign object damage was also evaluated by ballistic impacting of panels using projectiles of gelatin, RTV rubber and steel at various velocities, and impingement angles. A significant improvement in the pendulum impact resistance of B-Al composites was achieved.

Melnyk, P.↗
NASA NTRS1974

Propulsion dynamics of lunar hoppers

A feasibility study was recently completed on a hopping transporter concept for locomotion on the moon. Termed a Lunar Pogo because it would operate similarly to a conventional pogo stick, this vehicle would accelerate up an inclined leg, pick up the leg, and then enter ballistic flight over the moon's surface. Upon recontacting the lunar surface, the Lunar Pogo would decelerate down the leg. Propulsion would be provided by expansion of gas against a piston. Operation would be partially conservative because much of the energy expended by the gas during takeoff would be recovered by compressing the gas during landing. Two models of the ballistics and propulsion have been set up to estimate performance. The simplified first-order model illuminates the thermodynamics of ideal operation. The second-order model, which includes realistic effects such as sliding, provides a better approximation to actual performance. In a one-man Lunar Pogo, an astronaut would typically make 15-m (50-ft) leaps at an average speed of 5-8 km (3-5 miles) per hour.

Meetin, R. J.↗
NASA NTRS1975

Diurnal variations of atomic hydrogen - Observations and calculations

Theoretical calculations of the diurnal variation of atomic hydrogen in the thermosphere are presented that simultaneously evaluate the effects of thermosphere rotation, thermal escape, charge exchange with O(+) ions, charge exchange with hot H(+) ions, transport due to winds, and ballistic fluxes in a consistent manner. The first five effects cause a significant departure from the zero net ballistic flux condition. A thermospheric wind with a peak velocity of 50 m per sec at exobase altitude and a total charge exchange flux varying from 0 to 0.2 billion per sq cm per sec are found to be consistent with the observations.

Tinsley, B. A.↗
NASA NTRS1976

Planetary/DOD entry technology flight experiments. Volume 3: Planetary entry flight experiments handbook

The environments produced by entry into Jupiter and Saturn atmospheres are summarized. Worst case design environments are identified and the effect of entry angle, type of atmosphere and ballistic coefficient variations are presented. The range of environments experienced during earth entry is parametrically described as a function of initial entry conditions. The sensitivity of these environments to vehicle ballistic coefficient and nose radius is also shown. An elliptical deorbit maneuver strategy is defined in terms of the velocity increment required versus initial entry conditions and apoapsis altitude. Mission time, ground track, and out of plane velocity penalties are also presented. Performance capabilities of typical shuttle launched boosters are described including the initial entry conditions attainable as a function of paylaod mass and apoapsis altitude.

Christensen, H. E.↗
NASA NTRS1977

Aerodynamic behavior of the Viking entry vehicle - Ground test and flight results

An extensive series of tests of the Viking entry vehicle flying in pure CO2 was conducted in a ballistic range at Ames Research Center. The primary purpose of these tests was to calibrate the aerodynamic lift and drag characteristics in order to allow the density, pressure, and temperature profiles of the Martian atmosphere to be determined from onboard instrumentation carried on Viking. Both the Viking 1 and Viking 2 entry vehicles performed flawlessly during entry and descent, and the atmosphere structure was deduced to an altitude of about 120 km. A description is given of the ballistic range tests and of the aerodynamic behavior of the full scale entry vehicles during entry into the Martian atmosphere. Some comparisons between ground test and flight results are shown.

Kirk, D. B.↗
NASA NTRS1977

Ceramic composite protection for turbine disc bursts

Ceramic composite turbine disc protection panels for the A300B were developed using armor technology. Analytical predictions for modifying the ballistic projectile armor system were verified by a test program conducted to qualify the rotor containment system. With only a slight change in the areal density of the armor system a more than two-fold increase in kinetic energy protection level was achieved. Thickness of the fiberglass reinforced plastic backing material was increased to achieve an optimum ratio of ceramic thickness to backing thickness for the different ballistic defeat condition.

Gardner, P. B.↗
NASA NTRS1977

Development of Si3N4 and SiC of improved toughness

The application of energy absorbing surface layers to Si3N4 and SiC was investigated. Among the layers studied were microcracked materials such as iron titanate and a silica-zircon mixture and porous materials such as reaction sintered Si3N4. Energy absorption due to microcrack extension upon impact was found not to be an important mechanism. Instead, the fivefold improvement in Charpy and ballistic impact at elevated temperature (1250 C and 1370 C) found for Fe2TiO5 was due to plastic deformation while similar improvement found for silica-zircon mixtures at RT was due to crushing of the porous material. Due to thermal expansion mismatch, these two materials could not withstand thermal cycling when used as energy absorbing surface layers on Si3N4. Reaction sintered Si3N4 layers on dense Si3N4 were found to give up to a sevenfold increase in ballistic impact resistance due to crushing of the layer upon impact. High porosity (45%), large particle size R.S. Si3N4 layers fabricated from -100, +200 mesh Si powder gave better impact improvement than less porous (30%), small particle size layers fabricated from -325 mesh Si powder.

Brennan, J. J.↗
NASA NTRS1977

Mercury orbiter transport study

A data base and comparative performance analyses of alternative flight mode options for delivering a range of payload masses to Mercury orbit are provided. Launch opportunities over the period 1980-2000 are considered. Extensive data trades are developed for the ballistic flight mode option utilizing one or more swingbys of Venus. Advanced transport options studied include solar electric propulsion and solar sailing. Results show the significant performance tradeoffs among such key parameters as trip time, payload mass, propulsion system mass, orbit size, launch year sensitivity and relative cost-effectiveness. Handbook-type presentation formats, particularly in the case of ballistic mode data, provide planetary program planners with an easily used source of reference information essential in the preliminary steps of mission selection and planning.

Friedlander, A. L.↗