Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Electronic structure of chromium trihalides beyond density functional theory

In this work, we explore the electronic band structure of freestanding monolayers of chromium trihalides Cr X 3 , X = Cl, Br, I, within an advanced ab initio theoretical approach based on the use of Green's function functionals. We compare the local density approximation with the quasiparticle self-consistent GW (QS GW ) approximation and its self-consistent extension ( QS G W ^ ) by solving the particle-hole ladder Bethe-Salpeter equations to improve the effective interaction W . We show that, at all levels of theory, the valence band consistently changes shape in the sequence Cl → Br → I , and the valence band maximum shifts from the M point to the Γ point. By analyzing the dynamic and momentum-dependent self-energy, we show that QS G W ^ adds to the localization of the systems in comparison with QS GW , thereby leading to a narrower band and reduced amount of halogens in the valence band manifold. Further analysis shows that X = Cl is most strongly correlated, and X = I is least correlated (most bandlike) as the hybridization between Cr d and X p enhances in the direction Cl → Br → I . For CrBr 3 and CrI 3 , we observe remarkable differences between the QS GW and QS G W ^ valence band structures, while their eigenfunctions are very similar. We show that weak perturbations, like moderate strain, weak changes to the d - p hybridization, and adding small U , can flip the valence band structures between these two solutions in these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Iterative diagonalization of the non-Hermitian transcorrelated Hamiltonian using a plane-wave basis set: Application to sp-electron systems with deep core states

We develop an iterative diagonalization scheme in solving a one-body self-consistent-field equation in the transcorrelated (TC) method using a plane-wave basis set. Non-Hermiticity in the TC method is well handled with a block-Davidson algorithm. We verify that the required computational cost is efficiently reduced by our algorithm. In addition, we apply our plane-wave-basis TC calculation to some simple sp-electron systems with deep core states to elucidate an impact of the pseudopotential approximation to the calculated band structures. We find that a position of the deep valence bands is improved by an explicit inclusion of core states, but an overall band structure is consistent with a regular setup that includes core states into the pseudopotentials. This study offers an important understanding for the future application of the TC method to strongly correlated solids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Insulating band gaps both below and above the Néel temperature in d -electron LaTi O 3 , LaV O 3 , SrMn O 3 , and LaMn O 3 perovskites as a symmetry-breaking event

Metal d-electron oxides having an odd number of electrons per cell should exhibit band degeneracy at the Fermi energy, making them, in band theory, formally metallic. In many cases, however, these are “false metals”, as evidenced by the observation that many ABO 3 oxide perovskites with a magnetic 3d B-atom are observed to be insulators both below and above the Néel temperature. These inconsistencies between experimental observation and expectation have historically been resolved by invoking degeneracy-breaking physics, based largely on -pure electron effects, such as strong interelectronic correlation for d-electron compounds (the Mott mechanism). Such explanations generally consider microscopic lattice or magnetic degrees of freedom (m-DOF) as largely passive spectators, not a cause of the formally metallic being an insulator. Yet, it has long been known that ABO 3 perovskites can manifest an arrangement of m-DOFs in the form of octahedral tilting, bond dimerization, Jahn-Teller distortions, and ordering of local magnetic moments. It appears reasonable that such structural and magnetic local degrees of freedom need to be allowed to compete with purely electronic strong correlation. To answer this question, we explored a range of d-electron oxide perovskites exemplified by the archetypes LaTiO 3 , LaVO 3 , SrMnO 3 , and LaMnO 3 with 1, 2, 3, or 4 d -electrons, respectively. Using a mean-field-like electronic structure method (here, density functional theory), we find that a combination of magnetic symmetry breaking with structural distortions can account for insulating band gaps in this series while at the same time correctly predicting for the control case an intrinsic paramagnetic metal in SrVO 3 as symmetry-breaking is insufficiently strong to remove the degeneracy. Finally, this indicates that calculating quantitatively local magnetic and positional symmetry-breaking motifs in unit cells that avoid averaging at the outset over the low symmetry motifs can provide consistent trends in a Mott transition without Mott U.

36 MATERIALS SCIENCE↗

Optically induced changes in the band structure of the Weyl charge-density-wave compound (TaSe 4 ) 2 I

Collective modes are responsible for the emergence of novel quantum phases in topological materials. In the quasi-one dimensional (1D) Weyl semimetal (TaSe 4 ) 2 I , a charge density wave (CDW) opens band gaps at the Weyl points, thus turning the system into an axionic insulator. Melting the CDW would restore the Weyl phase, but 1D fluctuations extend the gapped regime far above the 3D transition temperature (T CDW = 263 K), thus preventing the investigation of this topological phase transition with conventional spectroscopic methods. Here we use a non-equilibrium approach: we perturb the CDW phase by photoexcitation, and we monitor the dynamical evolution of the band structure by time- and angle-resolved photoelectron spectroscopy. We find that, upon optical excitation, electrons populate the linearly dispersing states at the Fermi level (E F ), and fill the CDW gap. The dynamics of both the charge carrier population and the band gap renormalization (BGR) show a fast component with a characteristic time scale of a few hundreds femtoseconds. However, the BGR also exhibits a second slow component on the µs time scale. The combination of an ultrafast response and of persistent changes in the spectral weight at E$_\mathrm{F}$, and the resulting sensitivity of the linearly dispersing states to optical excitations, may explain the high performances of (TaSe 4 ) 2 I as a material for broadband infrared photodetectors.

36 MATERIALS SCIENCE↗

Monophasic zircon-type tetragonal Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution: synthesis, characterization, and optical properties

Highlights: • Complete Eu{sub 1−x}Bi{sub x}VO{sub 4} with zircon-type structure was successfully synthesized. • The band gap of the samples could be adjusted and controlled by bismuth content. • Eu{sub 1−x}Bi{sub x}VO{sub 4} show strong red emission under both near UV and visible-light excitation. - Abstract: By combining the methods of co-precipitation and hydrothermal synthesis methods, the complete solid-solution of Eu{sub 1−x}Bi{sub x}VO{sub 4} with monophasic zircon-type structure was successfully synthesized. The zircon-type structure was determined by X-ray diffractometer and Raman scattering, and the optical properties were characterized by ultraviolet-visible diffuse reflectance and photoluminescence spectrophotometer. The results indicate that the band gap of Eu{sub 1−x}Bi{sub x}VO{sub 4} could be adjusted and controlled by bismuth content in the range of x = 0–0.9. Meanwhile, the Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution phosphors show strong red light emission was shown in 619 nm under both near UV-light and visible-light excitation. Notably, the emission intensity of Eu{sub 1−x}Bi{sub x}VO{sub 4} (x = 0.4) is the strongest in all samples.

36 MATERIALS SCIENCE↗

Theoretical investigations of the physical properties of zircon-type YVO{sub 4}

The crystal structure, electronic properties, elastic properties, hardness and thermodynamic properties of the laser host material zircon-type YVO{sub 4} are studied using the pseudopotential plane wave method within the local density approximation (LDA) and generalized gradient approximation (GGA). The calculated ground state values such as lattice parameter, bulk modulus and its pressure derivative, the band structure and densities of states were in favorable agreement with previous works and the existed experimental data. The elastic constants C{sub ij}, the aggregate elastic moduli (B, G, E), Poisson's ratio and elastic anisotropy have been investigated. In YVO{sub 4}, V-O bonds with shorter bond length and larger Mulliken population make great contribution to hardness than Y-O bonds. Using quasi-harmonic Debye model considering the phonon effects, bulk modulus, heat capacity and thermal expansion coefficient of YVO{sub 4} are calculated within a range of 0-6 GPa and 0-1200 K. - Graphical Abstract: (a) Directional dependence of Young's modulus in zircon-type YVO{sub 4} and (b) projections of the directional dependent Young's modulus in different planes for zircon-type YVO{sub 4}. The units are in GPa. Highlights: Black-Right-Pointing-Pointer This paper systematically studied the physical properties of zircon-type YVO{sub 4} from first-principles calculations. Black-Right-Pointing-Pointer Zircon-type YVO{sub 4} is mechanically stable and it is ductile for B/G>1.75 and v>0.26. Black-Right-Pointing-Pointer Universal elastic anisotropy index A{sup U} for zircon-type YVO{sub 4} is 2.41, so YVO{sub 4} is anisotropic. Black-Right-Pointing-Pointer V-O bonds with shorter bond length and larger Mulliken population make greater contribution to the hardness of YVO{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Massively-parallel electron dynamics calculations in real-time and real-space: Toward applications to nanostructures of more than ten-nanometers in size

A highly efficient program of massively parallel calculations for electron dynamics has been developed in an effort to apply the method to optical response of nanostructures of more than ten-nanometers in size. The approach is based on time-dependent density functional theory calculations in real-time and real-space. The computational code is implemented by using simple algorithms with a finite-difference method in space derivative and Taylor expansion in time-propagation. Since the computational program is free from the algorithms of eigenvalue problems and fast-Fourier-transformation, which are usually implemented in conventional quantum chemistry or band structure calculations, it is highly suitable for massively parallel calculations. Benchmark calculations using the K computer at RIKEN demonstrate that the parallel efficiency of the program is very high on more than 60 000 CPU cores. The method is applied to optical response of arrays of C{sub 60} orderly nanostructures of more than 10 nm in size. The computed absorption spectrum is in good agreement with the experimental observation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA Tech Briefs, October 2012

Topics discussed include: Detection of Chemical Precursors of Explosives; Detecting Methane From Leaking Pipelines and as Greenhouse Gas in the Atmosphere; Onboard Sensor Data Qualification in Human-Rated Launch Vehicles; Rugged, Portable, Real-Time Optical Gaseous Analyzer for Hydrogen Fluoride; A Probabilistic Mass Estimation Algorithm for a Novel 7-Channel Capacitive Sample Verification Sensor; Low-Power Architecture for an Optical Life Gas Analyzer; Online Cable Tester and Rerouter; A Three-Frequency Feed for Millimeter-Wave Radiometry; Capacitance Probe Resonator for Multichannel Electrometer; Inverted Three-Junction Tandem Thermophotovoltaic Modules; Fabrication of Single Crystal MgO Capsules; Inflatable Hangar for Assembly of Large Structures in Space; Mars Aqueous Processing System; Hybrid Filter Membrane; Design for the Structure and the Mechanics of Moballs; Pressure Dome for High-Pressure Electrolyzer; Cascading Tesla Oscillating Flow Diode for Stirling Engine Gas Bearings; Compact, Low-Force, Low-Noise Linear Actuator; Ultra-Compact Motor Controller; Extreme Ionizing-Radiation-Resistant Bacterium; Wideband Single-Crystal Transducer for Bone Characterization; Fluorescence-Activated Cell Sorting of Live Versus Dead Bacterial Cells and Spores; Nonhazardous Urine Pretreatment Method; Laser-Ranging Transponders for Science Investigations of the Moon and Mars; Ka-Band Waveguide Three-Way Serial Combiner for MMIC Amplifiers; Structural Health Monitoring with Fiber Bragg Grating and Piezo Arrays; Low-Gain Circularly Polarized Antenna with Torus-Shaped Pattern; Stereo and IMU- Assisted Visual Odometry for Small Robots; Global Swath and Gridded Data Tiling; GOES-R: Satellite Insight; Aquarius iPhone Application; Monitoring of International Space Station Telemetry Using Shewhart Control Charts; Theory of a Traveling Wave Feed for a Planar Slot Array Antenna; Time Manager Software for a Flight Processor; Simulation of Oxygen Disintegration and Mixing With Hydrogen or Helium at Supercritical Pressure; A Superfluid Pulse Tube Refrigerator Without Moving Parts for Sub-Kelvin Cooling; Sapphire Viewports for a Venus Probe; The Mobile Chamber; Electric Propulsion Induced Secondary Mass Spectroscopy; and Radiation-Tolerant DC-DC Converters.

Source record↗

Mid-infrared signatures of hydroxyl containing water clusters: Infrared laser Stark spectroscopy of OH–H{sub 2}O and OH(D{sub 2}O){sub n} (n = 1-3)

Small water clusters containing a single hydroxyl radical are synthesized in liquid helium droplets. The OH–H{sub 2}O and OH(D{sub 2}O){sub n} clusters (n = 1-3) are probed with infrared laser spectroscopy in the vicinity of the hydroxyl radical OH stretch vibration. Experimental band origins are qualitatively consistent with ab initio calculations of the global minimum structures; however, frequency shifts from isolated OH are significantly over-predicted by both B3LYP and MP2 methods. An effective Hamiltonian that accounts for partial quenching of electronic angular momentum is used to analyze Stark spectra of the OH–H{sub 2}O and OH–D{sub 2}O binary complexes, revealing a 3.70(5) D permanent electric dipole moment. Computations of the dipole moment are in good agreement with experiment when large-amplitude vibrational averaging is taken into account. Polarization spectroscopy is employed to characterize two vibrational bands assigned to OH(D{sub 2}O){sub 2}, revealing two nearly isoenergetic cyclic isomers that differ in the orientation of the non-hydrogen-bonded deuterium atoms relative to the plane of the three oxygen atoms. The dipole moments for these clusters are determined to be approximately 2.5 and 1.8 D for “up-up” and “up-down” structures, respectively. Hydroxyl stretching bands of larger clusters containing three or more D{sub 2}O molecules are observed shifted approximately 300 cm{sup −1} to the red of the isolated OH radical. Pressure dependence studies and ab initio calculations imply the presence of multiple cyclic isomers of OH(D{sub 2}O){sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineered band structure for an enhanced performance on quantum dot-sensitized solar cells

A photon-to-current efficiency of 2.93% is received for the Mn-doped CdS (MCdS)-quantum dot sensitized solar cells (QDSSCs) using Mn:ZnO (MZnO) nanowire as photoanode. Hydrothermal synthesized MZnO are spin-coated on fluorine doped tin oxide (FTO) glass with P25 paste to serve as photoanode after calcinations. MCdS was deposited on the MZnO film by the successive ionic layer adsorption and reaction method. The long lived excitation energy state of Mn{sup 2+} is located inside the conduction band in the wide bandgap ZnO and under the conduction band of CdS, which increases the energetic overlap of donor and acceptor states, reducing the “loss-in-potential,” inhibiting charge recombination, and accelerating electron injection. The engineered band structure is well reflected by the electrochemical band detected using cyclic voltammetry. Cell performances are evidenced by current density-voltage (J-V) traces, diffuse reflectance spectra, transient PL spectroscopy, and incident photon to current conversion efficiency characterizations. Further coating of CdSe on MZnO/MCdS electrode expands the light absorption band of the sensitizer, an efficiency of 4.94% is received for QDSSCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure, thermodynamics, and crystallization of amorphous hafnia

We investigate theoretically amorphous hafnia using the first principles melt and quench method. We identify two types of amorphous structures of hafnia. Type I and type II are related to tetragonal and monoclinic hafnia, respectively. We find type II structure to show stronger disorder than type I. Using the phonon density of states, we calculate the specific heat capacity for type II amorphous hafnia. Using the nudged elastic band method, we show that the averaged transition barrier between the type II amorphous hafnia and monoclinic phase is approximately 0.09 eV/HfO{sub 2}. The crystallization temperature is estimated to be 421 K. The calculations suggest an explanation for the low thermal stability of amorphous hafnia.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near-infrared downconversion luminescence of SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors

Graphical abstract: The calculated band structure of SrMoO{sub 4} and the visible and infrared emission spectra of SrMoO{sub 4}:1%Tm{sup 3+},10%Yb{sup 3+} phosphors under 283 nm excitation.▪ - Highlights: • Near-infrared downconversion luminescence of SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors were systematically investigated. • The electronic structure of SrMoO{sub 4} was estimated by density functional theory. • The quenching concentration of Yb{sup 3+} ions approaches 10 mol%. • The energy transfer mechanism was discussed in detail. - Abstract: Tm{sup 3+} and Yb{sup 3+} codoped SrMoO{sub 4} phosphors were synthesized by the high-temperature solid-state reaction method. The structure, ultraviolet-visible diffuse reflectance spectra, photoluminescence, decay properties and theoretical energy transfer efficiency of the phosphors were investigated in detail. The electronic structure and band gap of SrMoO{sub 4} were estimated by density functional theory (DFT) calculation. The XRD results show that all the prepared phosphors can be readily indexed to scheelite-type structure. The strong visible emission around 473 nm from Tm{sup 3+} ({sup 1}G{sub 4} → {sup 3}H{sub 6}) and near-infrared (NIR) emission around 998 nm from Yb{sup 3+} ({sup 2}F{sub 5/2} → {sup 2}F{sub 7/2}) of the SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors were observed under 283 nm excitation. The dependence of the visible and NIR emissions on Yb{sup 3+} concentration have also been investigated. The quenching concentration of Yb{sup 3+} ions approaches 10 mol%. In addition, the energy transfer processes and possible transfer routes were proposed.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure, and photocatalytical properties of Ba{sub 3}Ta{sub 5}O{sub 14}N

Light yellow Ba{sub 3}Ta{sup V}{sub 5}O{sub 14}N was successfully synthesized as phase-pure material crystallizing isostructurally to well-known mixed-valence Ba{sub 3}Ta{sup V}{sub 4}Ta{sup IV}O{sub 15}. The electronic structure of Ba{sub 3}Ta{sub 5}O{sub 14}N was studied theoretically with a hybrid Hartree–Fock-DFT method. The most stable structure was obtained when nitrogen atoms were placed at 4 h sites having fourfold coordination. By incorporating nitrogen, the band gap decreases from ∼3.8 eV commonly known for barium tantalum(V) oxides to 2.8 eV for the oxide nitride, giving rise to an absorption band well in the visible-light region. Ba{sub 3}Ta{sub 5}O{sub 14}N was also tested for photocatalytic hydrogen formation. - Graphical abstract: Ta(O/N){sub 6} octahedra in Ba{sub 3}Ta{sub 5}O{sub 14}N with the determined bond lengths (Å).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Floquet–Bloch manipulation of the Dirac gap in a topological antiferromagnet

Floquet–Bloch manipulation, achieved by driving a material periodically with a laser pulse, is a method that enables the engineering of electronic and magnetic phases in solids by effectively modifying the structure of their electronic bands. However, the application of Floquet–Bloch manipulation in topological magnetic systems, particularly those with inherent disorder, remains largely unexplored. Here, in this study, we realize Floquet–Bloch manipulation of the Dirac surface-state mass of the topological antiferromagnet MnBi 2 Te 4 . Using time- and angle-resolved photoemission spectroscopy, we show that opposite helicities of mid-infrared circularly polarized light result in substantially different Dirac mass gaps in the antiferromagnetic phase, despite the equilibrium Dirac cone being massless. We explain our findings in terms of a Dirac fermion with a random mass. Our results underscore Floquet–Bloch manipulation as a powerful tool for controlling topology, even in the presence of disorder, and for uncovering properties of materials that may elude conventional probes.

42 ENGINEERING↗

Effect of Cu doping on Hole Mobility in CdTe

High quality CdTe thin films grown by laser deposition technique and heavily doped with Cu have recently been reported to have resistivity and hole mobility comparable to those of bulk single crystals. To explain the experimental results we have calculated the effect of Cu on the band structure and phonon spectrum of CdTe using the density functional theory (DFT) and the linearized augmented plane wave (LAPW) method. We found that the introduction of a high density of Cu can lead to a reduction in the hole-LO phonon scattering. In addition, Cu doping can remove Cd vacancies in CdTe and thereby enhance the hole mobility in CdTe.

36 MATERIALS SCIENCE↗

Tensile-strain and doping enhanced direct bandgap optical transition of n{sup +} doped Ge/GeSi quantum wells

Band structures of tensile strained and n{sup +} doped Ge/GeSi quantum wells (QWs) are calculated by multiple-band k·p method. The energy dispersion curves of the Γ and L conduction subbands are obtained. The effects of tensile strain and n{sup +} doping in Ge on direct bandgap optical gain and spontaneous radiative recombination rate spectra are investigated including the electron leakage from Γ to L conduction subbands. Our results show that the optical gain and spontaneous radiative recombination rate can be significantly increased with the tensile strain, n-type doping concentration, and injection carrier density in the Ge QW. The free carrier absorption is calculated and cannot be ignored because of the heavily doped Ge. The pure TM mode polarized net optical gain up to 1153 cm{sup −1} can be achieved for the Ge/Ge{sub 0.986}Si{sub 0.014} QW with tensile strain of 1.61% and n-type doping concentration of 30 × 10{sup 18} cm{sup −3}.

36 MATERIALS SCIENCE↗

Ab initio calculations of the rate of carrier trapping and release at dopant sites in NaI: Tl beyond the harmonic approximation

We present ab initio calculations of electron capture and release coefficients as a function of temperature for Tl dopants in the widely used scintillator NaI, which is a soft ionic crystal. The modelled capture and release events occur by transitions mediated by multiple phonon absorption and emission between states with significantly different local geometries around the trapping site. We demonstrate that such transitions are not well-described by the normal harmonic approximation to the nuclear dynamics. We avoid the harmonic approximation by numerically solving the vibrational Schrödinger equation for the motion along/of a single effective phonon coordinate. The localized trapped state is not correctly described by semilocal density functionals, so we employ a hybrid functional tuned to reproduce the band gap and lattice constant of the host material. Our calculations, which combine plane-wave and cluster electronic structure methods in a novel way, are in reasonable agreement with available experimental data for detrapping and predict an unusual temperature dependence for trapping rates.

Prange, Micah P.↗