Search NASA⌕ Search

SEARCH · Search NASA

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

A combined experimental and finite element study to predict the failure mechanisms in SiC coated carbon/carbon composites at room and elevated temperatures under flexural loading

Response of quasi-isotropic laminates of SiC coated Carbon/Carbon (C/C) composites have been investigated under flexural loading at various temperatures. Variation of load-deflection behavior with temperatures are studied. Increase in flexural strength and stiffness are observed with the rise in temperature. Extensive analyses through Optical Microscope (OM) and Non-Destructive Evaluation (NDE) have been performed to understand the failure mechanisms. Damage zone is found only within the neighborhood of the loading plane. Isoparametric layered shell elements developed on the basis of the first order shear deformation theory have been used to model the thin laminates of C/C under flexural loading. Large deformation behavior has been considered in the finite element analysis to account for the non-linearities encountered during the actual test. Data generated using finite element analysis are presented to corroborate the experimental findings, and a comparison in respect of displacement and stress-strain behavior are given to check the accuracy of the finite element analysis. Reasonable correlation between the experimental and finite element results have been established.

Mahfuz, Hassan↗

Supporting data package for TR 32-1541, effects of storage temperatures on silicon solar cell contacts

A series of summary curves is presented for cells having various contact systems, depicting the effects of temperature exposure as a function of time on the electrical and mechanical characteristics. Each curve represents the results obtained from a minimum of 32 and a maximum of 1104 individual data inputs and includes the 95% confidence limits associated with each time-temperature combination for which measurements were obtained. The curves are useful for detailed analysis and comparison of the behavior of the contact system as a function of the environmental conditions studied.

Berman, P. A.↗

Internal tibial torsion correction study

A quantitative study of internal torsion in the entire tibial bone was performed by using strain gauges to measure the amount of deformation occuring at different locations. Comparison of strain measurements with physical dimensions of the bone produced the modulus of rigidity and its behavior under increased torque. Computerized analysis of the stress distribution shows that more strain occurs near the torqued ends of the bones where also most of the twisting and fracturing takes place.

Cantu, J. M.↗

Imperfection-sensitivity in the plastic range

The effect of small imperfections on the buckling of continuous structures loaded into the plastic range is studied. A simple model study is presented and several additional examples are discussed. The role of the load at which elastic unloading first occurs is emphasized, and a general asymptotic analysis is given for the behavior prior to the onset of elastic unloading for a class of elastic-plastic solids subject to loads characterized by a single load parameter. Asymptotic imperfection-sensitivity formulae are obtained whose features are similar to analogous formulae for elastic structures.

Hutchinson, J. W.↗

Simulating an aerospace multiprocessor

The paper describes a simulator which was used to evaluate the architecture of an aerospace multiprocessor. The simulator models interactions among the processors, memories, the central data bus, and a possible 'job stack'. Special features of the simulator are discussed, including the use of explicitly coded and individually distinguishable 'job models' instead of a statistically defined 'job mix' and a specialized Job Model Definition Language to automate the detailed coding of the models. Some results are presented which show that when the simulator was employed in conjunction with queuing theory and Markov-process analysis, more insight into system behavior was obtained than would have been with any one technique alone.

Mallach, E. G.↗

White-dwarf variability and the rotation of g-modes

The multiperiodic behavior clearly evident after Fourier analysis of many DA white-dwarf light curves is interpreted as arising from outbursts whose timing is regulated by the rotation and oscillation of the star. A model is proposed on the basis of three main assumptions: (1) a broad array of g-mode oscillations is taking place all the time in DA white-dwarf variables; (2) slow rotation permits most of the g-modes to couple and form a small group of nonlinear modes, each characterized by one of the indices of the spherical harmonic functions involved; and (3) the observed brightenings of the star are produced by upwelling of convection on a large horizontal scale when the antinodes of the nonlinear oscillation patterns periodically rotate into alignment and cause a temporary local enhancement of energy per unit volume. This model is used to match precisely almost every strong periodicity observed in the complex light curves of the DA white dwarfs G207-9, G38-29, G29-38, and HL Tau 76. If the model has been applied correctly, the results indicate that all four of these variables are rotating slowly with periods in the range from 250 to 500 sec.

Wolff, C. L.↗

Buckling tests of structural elements applicable to large erectable space trusses

Detailed data on columns and center a joint for completeness is presented. Buckling data for a tripod arrangement of these columns using a cluster joint is also presented. The objectives of these test are: (1) to gain insight into joint requirements for truss structure; (2) to assess the structural qualities of the column and center joint designs; (3) to investigate the restraint provided by octetruss core members (tripod) to the cluster joints; (4) to provide insight into the level of analysis required to predict buckling behavior of Gr/E nestable columns both as simple columns and in a tripod arrangement; and (5) to provide a data base for Gr/E nestable columns.

Heard, W. L., Jr.↗

Observations on instabilities of cavitating inducers

Experimental observations of instability of cavitating inducers were made for two different inducers operating at different flow coefficients. In general, instability occurred just before head breakdown. Auto-oscillation and rotating cavitation were observed. Analysis of small-amplitude behavior of the inducer and hydraulic system is carried out, and analytical predictions of stability limits were compared with experiment.

Braisted, D.↗

Effects of precursor heating on radiative and chemically reacting viscous flow around a Jovian entry body

The influence of change in the precursor region flow properties on the entire shock layer flow phenomena around a Jovian entry body was investigated. The flow in the shock layer was assumed to be steady, axisymmetric, and viscous. Both the chemical equilibrium and the nonequilibrium composition of the shock layer gas were considered. The effects of transitional range behavior were included in the analysis of high altitude entry conditions. Realistic thermophysical and radiation models were used, and results were obtained by employing the implicit finite difference technique in the shock layer and an iterative procedure for the entire shock layer precursor zone. Results obtained for a 45 degree angle hyperboloid blunt body entering Jupiter's atmosphere at zero angle of attack indicates that preheating the gas significantly increases the static pressure and temperature ahead of the shock for entry velocities exceeding 36 km/sec. The nonequilibrium radiative heating rate to the body is found to be significantly higher than the corresponding equilibrium heating. The precursor heating generally increases the radiative and convective heating of a body. That increase is slightly higher for the nonequilibrium conditions.

Tiwari, S. N.↗

Open-circuit voltage improvements in low resistivity solar cells

Improvements in the open circuit voltage of 0.1 ohm-cm silicon solar cells were achieved using a multistep diffusion technique. Experimental details are given along with the results of an analysis that indicate that anomalous behavior of the electron mobility in the cell base limits attainment of higher voltages.

Godlewski, M. P.↗

Open-circuit voltage improvements in low resistivity solar cells

Improvements in the open-circuit voltage of 0.1 ohm-cm silicon solar cells have been achieved using a multistep diffusion technique. Experimental details are given along with the results of an analysis that indicate that anomalous behaviors of the electron mobility in the cell base limits attainment of higher voltages.

Godlewski, M. P.↗

Prediction of Earth rotation and polar motion

Based on the analysis of the polar motion behavior, the possibility of predicting polar motion up to one year in advance was found. Comparing these predicted polar coordinates with the observed ones (smoothed), the root mean square (rms) of the differences is about 0.02 seconds. The differences of the relative polar motion are much smaller. For any time interval of 20 to 30 days throughout the whole year, the rms of the relative polar motion differences is about 0.01 second. Compared with the best available VLBI results (from 1977 to 1980), the rms of pred. to obs. is 0.013 seconds, and the relative rms (for time intervals less than two months) is 0.008 seconds (here the observed data is unsmoothed). It appears that 80 to 90% of the polar motion is composed of the stable, predictable Chandler and annual terms. The UT1-UTC has more complicated changes than polar motion making it difficult to find a satisfactory method of long term prediction. So far the rms prediction error is 0.0023 s for up to 30 days.

Zhu, S. Y.↗

Optimal cooperative control synthesis of active displays

The utility of augmenting displays to aid the human operator in controlling high order complex systems is well known. Analytical evaluations of various display designs for a simple k/s-squared plant in a compensatory tracking task using an Optimal Control Model (OCM) of human behavior is carried out. This analysis reveals that significant improvement in performance should be obtained by skillful integration of key information into the display dynamics. The cooperative control synthesis technique previously developed to design pilot-optimal control augmentation is extended to incorporate the simultaneous design of performance enhancing augmented displays. The application of the cooperative control synthesis technique to the design of augmented displays is discussed for the simple k/s-squared plant. This technique is intended to provide a systematic approach to design optimally augmented displays tailored for specific tasks.

Garg, S.↗

Containerless Processing of Undercooled Melts

The physical mechanisms controlling liquid undercooling were studied for application to solidification processing methods. The undercooling potential of containerless processing was assessed on droplet samples of high melting temperature metals drop tube and drop tower facilities and in a laboratory-scale apparatus. New insight into nucleation and crystal growth will be obtained in undercooled liquids of high melting temperature iron and nickel-base systems. The processing parameters include melt superheat, droplet size and particle statistics and droplet surface coating. The solidification behavior is determined by thermal analysis and by structural and metallographic characterization.

Perepezko, J. H.↗

Optimal cooperative control synthesis of active displays

The utility of augmenting displays to aid the human operator in controlling high order complex systems is well known. Analytical evaluation of various display designs for a simple k/s sup 2 plant in a compensatory tracking task using an optimal Control Model (OCM) of human behavior is carried out. This analysis reveals that significant improvement in performance should be obtained by skillful integration of key information into the display dynamics. The cooperative control synthesis technique previously developed to design pilot-optimal control augmentation is extended to incorporate the simultaneous design of performance enhancing augmented displays. The application of the cooperative control synthesis technique to the design of augmented displays is discussed for the simple k/s sup 2 plant. This technique is intended to provide a systematic approach to design optimally augmented displays tailored for specific tasks.

Garg, S.↗

Geometric description and grid generation for space vehicles

The understanding and analysis of three dimensional fluid behavior around reentry vehicles, like the Space Shuttle Orbiter, is of considerable importance for flight applications. Vehicle designers need pressure, heat transfer, and shear distributions to support design activities. Traditionally these have been obtained by experimental data. Significant reduction in design costs can be obtained if the calculated results based on finite difference procedures are used to verify and supplement experimental results. Computing the flow field over Space Shuttle Orbiter, which has complex cross sectional geometries is a major problem. A first step in this direction is development of body definition and grid generation procedure. In this project a digitized body definition and grid generation procedure, developed earlier at JSC, is modified and applied to the Shuttle Orbiter X24C-10D. Two dimensional grid and body definition for various sections of the space vehicle is obtained using the differential equation method. This study demonstrates that this geometry and grid generation procedure can be applied to other aerospace vehicles such as aerospaceplanes.

Krishna, Madakasira G.↗

Simultaneous measurements of the magnetopause and flux transfer events at widely separated sites by AMPTE UKS and ISEE 1 and 2

On September 19, 1984, the ISEE 1 and 2 and AMPTE UKS and IRM spacecraft pairs crossed the dayside magnetopause at nearly the same universal time and magnetic local time but at much different latitudes. This fortuitous ocurrence allows the magnetopause and flux transfer events (FTEs) to be studied at two widely separated sites simultaneously. FTEs are observed at both locations, those at UKS having standard normal component signatures, while those at ISEE have reverse signatures. The FTEs at UKS, closer to the equator, appear to have less helicity, or 'twistedness' than those at ISEE far to the south. By identifying FTEs using the stringent Rijnbeek et al. (1984) criterion for the bipolar B(n) signature it might be concluded that FTEs are not necessarily detected simultaneously at UKS and ISEE. However, careful analysis of the field strength behavior at ISEE does reveal evidence that FTEs are indeed observed at both sites simultaneously. While within the magnetosphere, AMPTE and ISEE both observe a coherent field rarefaction coupled with a tilt; it is speculated that the signature is associated with time-dependent dayside magnetopause reconnection.

Elphic, R. C.↗

Hydrogen induced fracture characteristics of single crystal nickel-based superalloys

A stereoscopic method for use with x ray energy dispersive spectroscopy of rough surfaces was adapted and applied to the fracture surfaces single crystals of PWA 1480E to permit rapid orientation determinations of small cleavage planes. The method uses a mathematical treatment of stereo pair photomicrographs to measure the angle between the electron beam and the surface normal. One reference crystal orientation corresponding to the electron beam direction (crystal growth direction) is required to perform this trace analysis. The microstructure of PWA 1480E was characterized before fracture analysis was performed. The fracture behavior of single crystals of the PWA 1480E nickel-based superalloy was studied. The hydrogen-induced fracture behavior of single crystals of the PWA 1480E nickel-based superalloy was also studied. In order to understand the temperature dependence of hydrogen-induced embrittlement, notched single crystals with three different crystal growth orientations near zone axes (100), (110), and (111) were tensile tested at 871 C (1600 F) in both helium and hydrogen atmospheres at 34 MPa. Results and conclusions are given.

Chen, Po-Shou↗