Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cold working”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Analytic Couple Modeling Introducing Device Design Factor, Fin Factor, Thermal Diffusivity Factor, and Inductance Factor

A set of convenient thermoelectric device solutions have been derived in order to capture a number of factors which are previously only resolved with numerical techniques. The concise conversion efficiency equations derived from governing equations provide intuitive and straight-forward design guidelines. These guidelines allow for better device design without requiring detailed numerical modeling. The analytical modeling accounts for factors such as i) variable temperature boundary conditions, ii) lateral heat transfer, iii) temperature variable material properties, and iv) transient operation. New dimensionless parameters, similar to the figure of merit, are introduced including the device design factor, fin factor, thermal diffusivity factor, and inductance factor. These new device factors allow for the straight-forward description of phenomenon generally only captured with numerical work otherwise. As an example a device design factor of 0.38, which accounts for thermal resistance of the hot and cold shoes, can be used to calculate a conversion efficiency of 2.28 while the ideal conversion efficiency based on figure of merit alone would be 6.15. Likewise an ideal couple with efficiency of 6.15 will be reduced to 5.33 when lateral heat is accounted for with a fin factor of 1.0.

Seebeck effect↗
NASA NTRS2015

On the Comparison of the Long Penetration Mode (LPM) Supersonic Counterflowing Jet to the Supersonic Screech Jet

Classic tonal screech noise created by under-expanded supersonic jets; Long Penetration Mode (LPM) supersonic phenomenon -Under-expanded counter-flowing jet in supersonic free stream -Demonstrated in several wind tunnel tests -Modeled in several computational fluid dynamics (CFD) simulations; Discussion of LPM acoustics feedback and fluid interactions -Analogous to the aero-acoustics interactions seen in screech jets; Lessons Learned: Applying certain methodologies to LPM -Developed and successfully demonstrated in the study of screech jets -Discussion of mechanically induced excitation in fluid oscillators in general; Conclusions -Large body of work done on jet screech, other aero-acoustic phenomenacan have direct application to the study and applications of LPM cold flow jets

Farr, Rebecca A.↗
NASA NTRS1978

Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

Mild steel (AISI 1018) was selected as model cold-rolling material and Ti-6Al-4V and INCONEL 718 were selected as typical hot-rolling and cold-rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape-rolling process were developed. These models utilize the upper-bound and the slab methods of analysis, and are capable of predicting the lateral spread, roll-separating force, roll torque and local stresses, strains and strain rates. This computer-aided design (CAD) system is also capable of simulating the actual rolling process and thereby designing roll-pass schedule in rolling of an airfoil or similar shape. The predictions from the CAD system were verified with respect to cold rolling of mild steel plates. The system is being applied to cold and hot isothermal rolling of an airfoil shape, and will be verified with respect to laboratory experiments under controlled conditions.

Lahoti, G. D.↗
DOE OSTI2022

Equilibrium reconstruction of DIII-D plasmas using predictive modeling of the pressure profile

New workflows have been developed for predictive modeling of magnetohydrodynamic (MHD) equilibrium in tokamak plasmas. The goal of this work is to predict the MHD equilibrium in tokamak discharges without having measurements of the kinetic profiles. The workflows include a cold start tool, which constructs all the profiles and power flows needed by transport codes; a Grad–Shafranov equilibrium solver; and various codes for the sources and sinks. For validation purposes, a database of DIII-D tokamak discharges has been constructed that is comprised of scans in the plasma current, toroidal magnetic field, and triangularity. Initial efforts focused on developing a workflow utilizing an empirically derived pressure model tuned to DIII-D discharges with monotonic safety factor profiles. This workflow shows good agreement with experimental kinetic equilibrium calculations, but is limited in that it is a single fluid (equal ion and electron temperatures) model and lacks H-mode pedestal predictions. The best agreement with the H-mode database is obtained using a theory-based workflow utilizing pressure profile predictions from a coupled TGLF turbulent transport and EPED pedestal models together with external magnetics and Motional Stark Effect (MSE) data to construct the equilibrium. Here, we obtain an average root mean square error of 5.1% in the safety factor profile when comparing the predicted and experimental kinetic equilibrium. We also find good agreement with the plasma stored energy, internal inductance, and pressure profiles. Including MSE data in the theory-based workflow results in noticeably improved agreement with the q-profiles in high triangularity discharges in comparison with the results obtained with magnetic data only. The predictive equilibrium workflow is expected to have wide applications in experimental planning, between-shot analysis, and reactor studies.

Kinsey, J. E. (ORCID:0000000193347473)↗
DOE OSTI2022

Neutron backscatter edges as a diagnostic of burn propagation

High gain in hotspot-ignition inertial confinement fusion (ICF) implosions requires the propagation of thermonuclear burn from a central hotspot to the surrounding cold dense fuel. As ICF experiments enter the burning plasma regime, diagnostic signatures of burn propagation must be identified. In previous work [A. J. Crilly et al., Phys. Plasmas 27(1), 012701 (2020)], it has been shown that the spectral shape of the neutron backscatter edges is sensitive to the dense fuel hydrodynamic conditions. The backscatter edges are prominent features in the ICF neutron spectrum produced by the 180° scattering of primary deuterium–tritium fusion neutrons from ions. In this work, synthetic neutron spectra from radiation-hydrodynamics simulations of burning ICF implosions are used to assess the backscatter edge analysis in a propagating burn regime. Significant changes to the edge's spectral shape are observed as the degree of burn increases, and a simplified analysis is developed to infer scatter-averaged fluid velocity and temperature. The backscatter analysis offers direct measurement of the increased dense fuel temperatures that result from burn propagation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Helicon edge heating in Proto-MPEX: Azimuthally resolved RF modeling

The Material Plasma Exposure eXperiment (MPEX) is a linear device under construction at ORNL. MPEX employs a variety of heating systems, including a helicon antenna, which is the subject of this work. Lacking a resonant absorption mechanism, as tokamaks have, modeling the RF power absorption in such antennas requires detailed consideration of cold collisional physics. Previous modeling of the heating in this antenna was done exclusively in 2D, assuming axisymmetry and a single azimuthal mode number m = 1⁠. In this study, we introduce a fully 3D model. By including the full 3D physics, with its self-consistent geometry-imposed azimuthal spectrum, we are able to reproduce the experimentally observed transition from edge heating to core heating.

Tierens, Wouter [Oak Ridge National Laboratory (OR↗
DOE OSTI2025

Cosmic dipoles from large-scale structure surveys

Large-scale structure surveys can be used to measure the dipole in the cosmic microwave background (CMB), in the luminosity distances inferred from type-Ia supernova observations, and in the spatial distribution of galaxies and quasars. The measurements of these cosmic dipoles appear to be mutually inconsistent, even though they are expected to indicate the common observer velocity. This observational tension may represent a significant challenge to the standard model of cosmology. Here, in this work, we study in detail what contributes to the cosmic dipoles from CMB, supernova, and galaxy survey in the standard Λ cold dark matter (Λ⁢ CDM) model, though our theoretical model can be applied beyond the standard model. While measurements of the cosmic dipoles yield the relative velocities between the source samples and the observer velocity, the motion of the observer is the dominant contribution in the conformal Newtonian gauge, and the intrinsic velocities of the samples fall steeply with increasing redshift of the sources. Hence the cosmic dipoles of CMB, type-Ia supernovae, and galaxies should be aligned but can have different amplitudes. We also clarify several misconceptions that are commonly found in the literature.

cosmic microwave background↗
DOE OSTI2020

Microscopic study of the coupled-wire construction and plausible realization in spin-dependent optical lattices

Coupled-wire constructions offer particularly simple and powerful models to capture the essence of strongly correlated topological phases of matter. They often rely on effective theories valid in the low-energy and strong-coupling limits, which impose severe constraints on the physical systems where they could be realized. In this work, we investigate the microscopic relevance of a class of coupled-wire models and their possible experimental realization in cold-atom experiments. We connect with earlier results and prove the emergence of fractional quantum Hall states in the limit of strong interwire tunneling. Contrary to previous studies relying on renormalization group arguments, our microscopic approach exposes the connection between coupled-wire constructions and model wave functions in continuum Landau levels. Then, we use exact-diagonalization methods to investigate the appearance of these fractional quantum Hall states in more realistic settings. We examine the parameter regimes where these strongly correlated phases arise, and provide a way to detect their appearance in cold-atom experiments through standard time-of-flight measurements. Motivated by this experimental probe, we finally propose a realization of our model with cold atoms in spin-dependent optical lattices. Our estimates show that the previous fractional quantum Hall phases lie within experimentally accessible parameter regimes, giving a viable route toward their experimental study.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Multiphase tin equation of state using density functional theory

In this work, we perform density functional theory (DFT) calculations of five solid phases and the liquid phase of tin. The calculations include cold curves of the five solid phases, phonon calculations in the quasiharmonic approximation over a range of volumes for each solid phase, and DFT-based molecular dynamics (DFT-MD) simulations of the liquid phase, including those of the melt curve using the Z method. Using the DFT results, we construct a tabular multiphase sesame equation of state for tin, referred to as sesame 2162. Comparisons to experimental data are made and show a high level of agreement in isobaric data, isothermal data, shock data, and phase boundary measurements, including measurements of the melt curve. The 2162 EOS will be useful for hydrodynamics simulations and has been designed with an eye toward hydrodynamics simulations that incorporate materials strength models and allow for modeling of the kinetics of phase transitions.

3-dimensional systems↗
NASA NTRS1995

Demonstration of solar echoes using the Air Force OTH-B radar

From the late 50s to early 70s, attempts were made by at least two different groups to obtain information on physical conditions in the corona by means of active radar soundings. While echoes from the Sun were unquestionably detected. difficulties in their interpretation led to inconclusive results. A major hindrance to these efforts was the limited understanding of the day-to-day structure of the corona then available (e.g., pioneering work in solar wind studies were just underway. and coronal holes had not yet been discovered). With the end of the Cold War, the very large over-the-horizon (OTH) radars operated by the Air Force have been opened up to basic science research through the end of the fiscal year. In light of advances made in coronal physics and in signal processing technology since these early experiments were undertaken. access to the state-of-the art OTH-B radar offers a rare opportunity to gauge anew the scientific potential for radar sounding of the Sun. In principle, it should be possible to obtain useful data on plasma densities and motions over a range of heights in the corona near 0.5R(solar mass) above the solar surface We report here the preliminary findings from a sequence of observations taken over the course of a solar rotation.

Pizzo, V. J.↗
NASA NTRS2011

Statistical Analysis of Thermal Analysis Margin

NASA Goddard Space Flight Center requires that each project demonstrate a minimum of 5 C margin between temperature predictions and hot and cold flight operational limits. The bounding temperature predictions include worst-case environment and thermal optical properties. The purpose of this work is to: assess how current missions are performing against their pre-launch bounding temperature predictions and suggest any possible changes to the thermal analysis margin rules

Garrison, Matthew B.↗
NASA NTRS2017

Mapping Vinyl Cyanide and Other Nitriles in Titan's Atmosphere Using ALMA

Vinyl cyanide (C2H3CN) is theorized to form in Titan's atmosphere via high-altitude photochemistry and is of interest regarding the astrobiology of cold planetary surfaces due to its predicted ability to form cell membrane-like structures (azotosomes) in liquid methane. In this work, we follow up on the initial spectroscopic detection of C2H3CN on Titan by Palmer et al. with the detection of three new C2H3CN rotational emission lines at submillimeter frequencies. These new, high-resolution detections have allowed for the first spatial distribution mapping of C2H3CN on Titan. We present simultaneous observations of C2H5CN, HC3N, and CH3CN emission, and obtain the first (tentative) detection of C3H8 (propane) at radio wavelengths. We present disk-averaged vertical abundance profiles, two-dimensional spatial maps, and latitudinal flux profiles for the observed nitriles. Similarly to HC3N and C2H5CN, which are theorized to be short-lived in Titan's atmosphere, C2H3CN is most abundant over the southern (winter) pole, whereas the longer-lived CH3CN is more concentrated in the north. This abundance pattern is consistent with the combined effects of high-altitude photochemical production, poleward advection, and the subsequent reversal of Titan's atmospheric circulation system following the recent transition from northern to southern winter. We confirm that C2H3CN and C2H5CN are most abundant at altitudes above 200 km. Using a 300 km step model, the average abundance of C2H3CN is found to be 3.03 +/- 0.29ppb, with a C2H5CN/C2H3CN abundance ratio of 2.43 +/- 0.26. Our HC3N and CH3CN spectra can be accurately modeled using abundance gradients above the tropopause, with fractional scale-heights of 2.05 +/- 0.16 and 1.63 +/- 0.02, respectively.

Lai, J. C.-Y.↗
NASA NTRS2021

Hydrocarbon Cold-Flow Simulation of LOX/LH2 Rocket Aerodynamics

In FY19, this project developed a test method which employed heated ethane in the physical simulation of rocket plume aerodynamics. Based on this work, EUS partnered with significant leveraged funding. A portable, self-contained test bed was also fabricated to support validation of the new method. In FY20, this project focused on the formal validation of ethane’s performance as an aerodynamic simulant as well as the development of the analytical and hardware infrastructure required to carry out that task. The test bed was activated, a series of heated-ethane tests on one or more rocket/diffuser configurations were conducted, and characterizations of the performance of the ethane simulation compared to hot-fire were performed. A series of 127 tests were conducted on 13 aerodynamic configurations to evaluate ethane’s performance as a simulant. It was found that the new methodology can reproduce rocket plume flow fields with +/- 0.5% pressure error at ~3% physical scale. The result is a cost-per-test reduction of ~99% compared to the hot-fire subscale testing typically used to obtain equivalent data. Some initial efforts have taken place, and future efforts are being planned with LaRC supersonic retro propulsion and MSFC SLS aerodynamics teams, which are interested in using the ethane system to wind-tunnel test human-rated Mars lander retrorockets and SLS Booster. Details of the prototypical experiments were published as NASA TM 2020-5009122,and have been presented in JANNAF Virtual Conference paper, "New Developments in Retro propulsion Testing for Mars Entry, Descent and Landing".

Daniel Jones↗
NASA NTRS2003

A Mechanism for Recent Production of Liquid Water on Mars

Though Mars is a cold, dry planet, with respect to the thermal stability of liquid water at low altitudes it is not terribly different from comparably cold places on Earth. In dry air such water would evaporate faster on Mars, at a rate comparable to a 60 C hot spring on Earth, but the heat loss associated with that evaporation would be mitigated by the poor thermal convection in the thin Martian air. Even at higher altitudes where the atmospheric pressure does not reach the triple point of water, liquid water might theoretically exist in a low-vapor pressure form such as wet soil, in a briny solution, or simply under a layer of dust or snow. The theoretical stability of liquid water does not suggest its occurrence, either on Mars or in Antarctica. In fact, global models have suggested that locations capable of providing sufficient heat for melting are, precisely for that reason, too dry for water to be present. However, the temperature of irregular local structures such as trenches or craters can be markedly warmer than those of the uniform surfaces of global models. The work described here suggests a plausible scenario in which seasonal liquid water might be produced locally, in sheltered locations, through a process of condensation, cold-trapping, buffering, and melting. While the amounts produced in the present climate would be small, copious amounts of meltwater may have been produced at other phases of the orbital cycle, as recently as 20,000 years ago.

Hecht, M. H.↗
NASA NTRS2013

Marshall Team Complete Testing for Lunar Atmosphere and Dust Environment Explorer

Dr. Huu Trinh and his team with the Propulsion Systems and Test Departments at Marshall Space Flight Center in Huntsville, Ala. successfully complete a simulated cold-flow test series on the propulsion system used for the Lunar Atmosphere and Dust Environment Explorer (LADEE) spacecraft. NASA Ames Research Center, Moffett Field, Calif., is leading NASA s work on the development of the LADEE spacecraft, and the Marshall center is the program office for the project. The spacecraft, scheduled for launch this fall, will orbit the Moon and gather information about the lunar atmosphere, conditions near the surface of the Moon, and collect samples of lunar dust. A thorough understanding of these characteristics will address long-standing unknowns, and help scientists understand other planetary bodies as well. The test team at the Marshall center conducted the cold flow test to identify how the fluid flows through the propulsion system feed lines, especially during critical operation modes. The test data will be used to assist the LADEE team in identifying any potential flow issues in the propulsion system, and allow them to address and correct them in advance of the launch.

Swofford, Philip↗
DOE OSTI2021

MHD simulations of cold bubble formation from 2/1 tearing mode during massive gas injection in a tokamak

Massive gas injection (MGI) experiments have been carried out in many tokamaks to study disruption dynamics and mitigation schemes. Two events often observed in those experiments are the excitation of the m = 2, n = 1 magnetohydrodynamic mode, and the formation of cold bubble structure in the temperature distribution before the thermal quench (TQ). Here m is the poloidal mode number, n the toroidal mode number. The physics mechanisms underlying those phenomena, however, have not been entirely clear. In this work, our recent NIMROD simulations of the MGI process in a tokamak have reproduced the main features of both events, which has allowed us to examine and establish the causal relation between them. In these simulations, the 3/1 and 2/1 islands are found to form successively after the arrival of impurity ion cold front at the corresponding q = 3 and q = 2 rational surfaces. At the interface between impurity and plasma, a local thin current sheet forms due to an enhanced local pressure gradient and moves inward following the gas cold front, this may contribute to the formation of a dominant 2/1 mode. Following the growth of the 2/1 tearing mode, the impurity penetration into the core region inside the q = 2 surface gives rise to the formation of the cold bubble temperature structure and initiates the final TQ. Here, a subdominant 1/1 mode developed earlier near the q = 1 surface alone does not cause such a cold bubble formation, however, the exact manner of the preceding impurity penetration depends on the nature of the 1/1 mode: kink-tearing or quasi-interchange.

2/1 tearing mode↗
NASA NTRS1999

Main Chamber and Preburner Injector Technology

This document reports the experimental and analytical research carried out at the Penn State Propulsion Engineering Research Center in support of NASA's plan to develop advanced technologies for future single stage to orbit (SSTO) propulsion systems. The focus of the work is on understanding specific technical issues related to bi-propellant and tri-propellant thrusters. The experiments concentrate on both cold flow demonstrations and hot-fire uni-element tests to demonstrate concepts that can be incorporated into hardware design and development. The analysis is CFD-based and is intended to support the design and interpretation of the experiments and to extrapolate findings to full-scale designs. The research is divided into five main categories that impact various SSTO development scenarios. The first category focuses on RP-1/gaseous hydrogen (GH2)/gaseous oxygen (GO2) tri-propellant combustion with specific emphasis on understanding the benefits of hydrogen addition to RP-1/oxygen combustion and in developing innovative injector technology. The second category investigates liquid oxygen (LOX)/GH2 combustion at main chamber near stoichiometric conditions to improve understanding of existing LOX/GH2 rocket systems. The third and fourth categories investigate the technical issues related with oxidizer-rich and fuel-rich propulsive concepts, issues that are necessary for developing the full-flow engine cycle. Here, injector technology issues for both LOX/GH2 and LOX/RP-1 propellants are examined. The last category, also related to the full-flow engine cycle, examines injector technology needs for GO2/GH2 propellant combustion at near-stoichiometric conditions for main chamber application.

Santoro, Robert J.↗
NASA NTRS2019

PSR J0030+0451 Mass and Radius from NICER Data and Implications for the Properties of Neutron Star Matter

Neutron stars are not only of astrophysical interest, but are also of great interest to nuclear physicists because their attributes can be used to determine the properties of the dense matter in their cores. One of the most informative approaches for determining the equation of state (EoS) of this dense matter is to measure both a star’s equatorial circumferential radius Re and its gravitational mass M. Here we report estimates of the mass and radius of the isolated 205.53 Hz millisecond pulsar PSRJ0030+0451 obtained using a Bayesian inference approach to analyze its energy-dependent thermal X-ray waveform, which was observed using the Neutron Star Interior Composition Explorer (NICER). This approach is thought to be less subject to systematic errors than other approaches for estimating neutron star radii. We explored a variety of emission patterns on the stellar surface. Our best-fit model has three oval, uniform-temperature emitting spots and provides an excellent description of the pulse waveform observed using NICER. The radius and mass estimates given by this model are Re = 13.02+1.24-1.06 km andM = 1.44+0.15-0.14 Mmoon (68%). The independent analysis reported in the companion paper by Riley et al. explores different emitting spot models, but finds spot shapes and locations and estimates of Re and M that are consistent with those found in this work. We show that our measurements of Re and M for PSRJ0030+0451 improve the astrophysical constraints on the EoS of cold, catalyzed matter above nuclear saturation density.

M C Miller↗