Search NASA⌕ Search

SEARCH · Search NASA

Results for “Configuration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Tandem fan applications in advanced STOVL fighter configurations

The series/parallel tandem fan engine is evaluated for application in advanced STOVL supersonic fighter aircraft. Options in engine cycle parameters and design of the front fan flow diverter are examined for their effects on engine weight, dimensions, and other factors in integration of the engine with the aircraft. Operation of the engine in high-bypass flow mode during cruise and loiter flight is considered as a means of minimizing fuel consumption. Engine thrust augmentation by burning in the front fan exhaust is discussed. Achievement of very short takeoff with vectored thrust is briefly reviewed for tandem fan engine configurations with vectorable front fan nozzles. Examples are given of two aircraft configuration planforms, a delta-canard, and a forward-swept wing, to illustrate the major features, design considerations, and potential performance of the tandem fan installation in each. Full realization of the advantages of tandem fan propulsion are found to depend on careful selection of the aircraft configuration, since integration requirements can strongly influence the engine performance. Previously announced in STAR as N84-24579

Zola, C. L.↗
NASA NTRS1986

Zero-Lift Wave Drag of Complex Aircraft Configurations

WAVDRAG calculates supersonic zero-lift wave drag of complex aircraft configurations. Numerical model of aircraft used throughout design process from concept to manufacturing. Incorporates extended geometric input capabilities to permit use of more accurate mathematical model. Engineer defines aircraft components as fusiform or nonfusiform in terms of traditional parallel contours or nonintersecting contours in any direction. Laterally asymmetric configurations simulated. WAVDRAG calculates total drag and wave-drag coefficient of specified aircraft configuration.

Craidon, C., B.↗
NASA NTRS1985

The space shuttle ascent vehicle aerodynamic challenges configuration design and data base development

The phase B Space Shuttle systems definition studies resulted in a generic configuration consisting of a delta wing orbiter, and two solid rocket boosters (SRB) attached to an external fuel tank (ET). The initial challenge facing the aerodynamic community was aerodynamically optimizing, within limits, this configuration. As the Shuttle program developed and the sensitivities of the vehicle to aerodynamics were better understood the requirements of the aerodynamic data base grew. Adequately characterizing the vehicle to support the various design studies exploded the size of the data base to proportions that created a data modeling/management challenge for the aerodynamicist. The ascent aerodynamic data base originated primarily from wind tunnel test results. The complexity of the configuration rendered conventional analytic methods of little use. Initial wind tunnel tests provided results which included undesirable effects from model support tructure, inadequate element proximity, and inadequate plume simulation. The challenge to improve the quality of test results by determining the extent of these undesirable effects and subsequently develop testing techniques to eliminate them was imposed on the aerodynamic community. The challenges to the ascent aerodynamics community documented are unique due to the aerodynamic complexity of the Shuttle launch. Never before was such a complex vehicle aerodynamically characterized. The challenges were met with innovative engineering analyses/methodology development and wind tunnel testing techniques.

Dill, C. C.↗
NASA NTRS1985

Parametric study of a canard-configured transport using conceptual design optimization

Constrained-parameter optimization is used to perform optimal conceptual design of both canard and conventional configurations of a medium-range transport. A number of design constants and design constraints are systematically varied to compare the sensitivities of canard and conventional configurations to a variety of technology assumptions. Main-landing-gear location and canard surface high-lift performance are identified as critical design parameters for a statically stable, subsonic, canard-configured transport.

Arbuckle, P. D.↗
NASA NTRS1985

Study of an efficient long-range Mach 2.7 supersonic transport configuration concept

A long range Mach 2.7 supersonic transport configuration concept was studied utilizing linear theory methods. The configuration was sized to carry 290 passengers 6,000 nautical miles nonstop. The final configuration has a maximum takeoff gross weight of 687,200 pounds, a wing loading of 69.8 lbf/sq.ft. and a thrust weight ratio of .278. The most significant result is that a significantly improved trimmed maximum lift drag ratio of 11.04 can be obtained for a supersonic transport at Mach 2.62 and 55,000 feet.

Gall, P. D.↗
NASA NTRS1985

Comparisons of various configurations of the edge delamination test for interlaminar fracture toughness

Various configurations of Edge Delamination Tension (EDT) test specimens, of both brittle (T300/5208) and toughened-matrix (T300/BP907) graphite reinforced composite laminates, were manufactured and tested. The mixed-mode interlaminar fracture toughness, G sub C, was measured using (30/30 sub 2/30/90 sub N)sub s, n=1 or 2, (35/-35/0/90) sub s and (35/0/-35/90) sub s layups designed to delaminate at low tensile strains. Laminates were made without inserts so that delaminations would form naturally between the central 90 deg plies and the adjacent angle plies. Laminates were also made with Teflon inserts implanted between the 90 deg plies and the adjacent angle (theta) plies at the straight edge to obtain a planar fracture surface. In addition, interlaminar tension fracture toughness, GIc, was measured from laminates with the same layup but with inserts in the midplane, between the central 90 deg plies, at the straight edge. All of the EDT configurations were useful for ranking the delamination resistance of composites with different matrix resins. Furthermore, the variety of layups and configurations available yield interlaminar fracture toughness measurements needed to generate delamination failure criteria. The influence of insert thickness and location, and coupon size on G sub c values were evaluated.

Obrien, T. K.↗
NASA NTRS1985

Structural dynamics model and response of the deployable reference configuration space station

The analytical models and results of a structural dynamics investigation of the reference initial operation and evolutionary configurations of the nine foot bay space station are presented. This investigation was carried out between April and August 1984 as part of a team effort to define a reference configuration for the first U.S. manned space station. The results presented herein serve as a guide, a point of departure and a standard for future NASA and contractor studies leading to the design of the Space Station. The reference initial operation configuration of the nine foot bay station was found to be very flexible, with its lowest mode between 0.096 and 0.138 Hertz depending on station attachments. However, for the transient load cases which were then available, internal member loads had positive margins of safety and preliminary results indicate that laboratory experiments which require quiescent conditions can be satisfied down to the order of 0.0001 g's.

Housner, J. M.↗
NASA NTRS1984

Analysis of the magnetic field configuration of a filament-associated flare from X-ray, UV, and optical observations

X-ray and ultraviolet observations from SMM of a filament-associated event on November 22, 1980 are examined in conjunction with ground-based optical observations, in order to determine the magnetic field configuration involved in the flaring process. Evidence that the flare was produced by gradual energy release in a large sheared magnetic loop which interacted with another smaller loop is found. Nonthermal processes, as indicated by hard X-ray emission and impulsive UV kernels, were produced in the interaction of the two loops. Although this flare shared some of the characteristics of Long Duration (class II) Events, no indication of a helmet-type configuration, as generally envisaged for class II events, was found. On the contrary, the magnetic configuration of the November 22, 1980 event was more similar to that of a compact (class I) flare, although on a much larger spatial scale and longer time scale.

Cheng, C.-C.↗
NASA NTRS1985

Subsonic pressure distributions near a wing-fin juncture on a supersonic arrow-wing configuration with wing-mounted vertical fins

A generic supersonic arrow-wing configuration has been extensively studied to develop a consistent experimental data base to aid in verifying analytical prediction methods. One of the wing configurations studied was a twisted and cambered wing with wing-mounted vertical fins and trailing-edge flaps. The pressure data obtained on that configuration was limited in the wing-fin juncture region, and no pressures were obtained on the fin itself. However, detailed data in the juncture region and on the fin are essential to check out the analytical prediction methods. Therefore, the model was modified to provide details of the juncture pressure field as well as pressures on the fin. The results of this experimental investigation showed that the addition of a fin helped improve the wing pressure distribution outboard of the fin. Deflection of the trailing-edge flap did not adversely affect this trend. The pressure distributions on the vertical fin were generally affected more by change in angle of attack than by flap deflection. The spanwise pressure distribution on the fin itself indicated a load reversal with angle of attack.

Huffman, J. K.↗
NASA NTRS1984

Influence of precracked specimen configuration and starting stress intensity on the stress corrosion cracking of 4340 steel

Experimental results are presented from a study of the effects of precracked specimen configuration and initial starting stress intensity on crack growth rate and threshold stress intensity, for both onset of cracking and crack arrest. Attention is given to AISI 4340 steel in a 3.5-percent NaCl solution, for configurations of a single edge-cracked specimen tested in cantilever bending under constant load, and a modified compact specimen bolt loaded to a constant deflection. The threshold stress intensity value determined was independent of specimen configuration, if the stress intensity value associated with the compact specimen is taken where the discontinuous break occurs in the velocity-stress intensity curve.

Lisagor, W. B.↗
NASA NTRS1984

Influence of precracked specimen configuration and starting stress intensity on the stress corrosion cracking of 4340 steel

Since the pioneer work of Brown (1966), precracked specimens and related fracture mechanics analyses have been extensively used to study stress corrosion cracking. Certain questions arose in connection with initial attempts to prepare standardized recommended practices by ASTM Committee G-1 on Corrosion of Metals. These questions were related to adequacy of test control as it pertains to acceptable limits of variability, and to validity of expressions for stress intensity and crack-surface displacements for both specimen configurations. An interlaboratory test program, was, therefore, planned with the objective to examine the validity of KIscc testing for selected specimen configurations, materials,and environmental systems. The results reported in the present paper include details of a single laboratory test program. The program was conducted to determine if the threshold value of stress intensity for onset and arrest of stress corrosion cracking was independent for the two specimen configurations examined.

Lisagor, W. B.↗
NASA NTRS1985

A historic review of canard configurations

The first human-powered flight was achieved by a canard-configured aircraft (Wright Brothers). Although other canard concepts were flown with varying degrees of success over the years, the tail-aft configuration has dominated the aircraft market for both military and civil use. This paper reviews the development of canard aircraft with emphasis on stability and control, handling qualities, and operating problems. The results show that early canard concepts suffered adversely in flight behavior because of a lack of understanding of the sensitivities of these concepts to basic stability and control principles. Modern canard designs have been made competitive with tail-aft configurations by using appropriate handling qualities design criteria.

Anderson, S. B.↗
NASA NTRS1984

A comparative study of linear and nonlinear MIMO feedback configurations

In this paper, a comparison is conducted of several feedback configurations which have appeared in the literature (e.g. unity-feedback, model-reference, etc.). The linear time-invariant multi-input multi-output case is considered. For each configuration, the stability conditions are specified, the relation between achievable I/O maps and the achievable disturbance-to-output maps is examined, and the effect of various subsystem perturbations on the system performance is studied. In terms of these considerations, it is demonstrated that one of the configurations considered is better than all the others. The results are then extended to the nonlinear multi-input multi-output case.

Desoer, C. A.↗
NASA NTRS1986

Benchmark full configuration-interaction calculations on H2O, F- and F

Full configuration-interaction calculations are reported, and compared to other methods, for H2O at its equilibrium geometry and at two geometries with the H-O bonds stretched. Since the percentage of the self-consistent field (SCF) reference in the full configuration-interaction (FCI) wave function decreases greatly with the bond elongation, the accuracy of techniques based on a single reference do not compare well with the FCI results. However, the results from a complete active space SCF/multireference configuration-interaction (CASSCF/MRCI) treatment are in good agreement with the FCI. Correlation effects in F compared to Ne are far more similar than for F- compared to Ne, despite F- and Ne being isoelectronic. Since the importance of higher than double excitations is more important for F- than F, a very high percentage of the correlation must be obtained to accurately compute the electron affinity. In a CASSCF/MRCI treatment the higher than quadruple excitations contribute 0.02 eV to the electron affinity (EA), even for modest basis sets.

Bauschlicher, C. W., Jr.↗
NASA NTRS1985

Fiber optic configurations for local area networks

A number of fiber optic configurations for a new class of demand assignment multiple-access local area networks requiring a physical ordering among stations are proposed. In such networks, the data transmission and linear-ordering functions may be distinguished and be provided by separate data and control subnetworks. The configurations proposed for the data subnetwork are based on the linear, star, and tree topologies. To provide the linear-ordering function, the control subnetwork must always have a linear unidirectional bus structure. Due to the reciprocity and excess loss of optical couplers, the number of stations that can be accommodated on a linear fiber optic bus is severely limited. Two techniques are proposed to overcome this limitation. For each of the data and control subnetwork configurations, the maximum number of stations as a function of the power margin, for both reciprocal and nonreciprocal couplers, is computed.

Nassehi, M. M.↗
NASA NTRS1985

Computation of supersonic flows over three-dimensional configurations

An aerodynamic prediction technique based on the steady form of the full-potential equation has been applied to a variety of three-dimensional supersonic flow problems exhibiting embedded subsonic regions. A conservative switching scheme is employed to transition from the supersonic relaxation algorithm, and vice versa. Numerical solutions are obtained for a number of complex configurations, including advanced tactical fighter, Langley canard-wing fighter configuration, isolated shuttle orbiter, and mated shuttle orbiter configuration with external tank. The computed results are in good agreement with available experimental data.

Szema, K.-Y.↗
NASA NTRS1986

Euler solutions for high-speed flow about complex three-dimensional configurations

A numerical algorithm based on a finite-volume explicit scheme with Runge-Kutta time integration of the Euler equations is presented for calculating high-speed three-dimensional flow about complex aerospace configurations. The use of enhancing factors such as artificial dissipative terms, enthalpy damping and local time-stepping are described. An algebraic method for generating quasi-three-dimensional computational grids for realistic aerospace configurations is presented. Computed results for various three-dimensional bodies at different Mach numbers and angles of attack have been obtained using the methods for grid-generation and flow simulation. Comparison of computed and experimental data for an advanced tactical aircraft-like configuration is presented, and a reasonable agreement of the data is noticed.

Moitra, A.↗
NASA NTRS1984

Flight testing the fixed wing configuration of the Rotor Systems Research Aircraft (RSRA)

The Rotor Systems Research Aircraft (RSRA) is a unique research aircraft designed to flight test advanced helicopter rotor system. Its principal flight test configuration is as a compound helicopter. The fixed wing configuration of the RSRA was primarily considered an energy fly-home mode in the event it became necessary to sever an unstable rotor system in flight. While it had always been planned to flight test the fixed wing configuraion, the selection of the RSRA as the flight test bed for the x-wing rotor accelerated this schedule. This paper discusses the build-up to, and the test of, the RSRA fixed wing configuration. It is written primarily from the test pilot's perspective.

Hall, G. W.↗