Search NASA⌕ Search

SEARCH · Search NASA

Results for “Design Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Mars Small Spacecraft Studies: Overview

NASA’s Mars Exploration Program is studying a potential Mars Sample Return (MSR) campaign consisting of a series of missions over the next decade that would return samples collected at Mars for analyses in terrestrial laboratories. It is anticipated that during such a campaign, many in the Mars science community would seek to continue high-priority science investigations in parallel to those provided by geological and astrobiological sample return investigations. To respond to this anticipated desire of the science community, JPL is performing a study of small spacecraft mission concepts to Mars that could bridge the gap between MSR and other desired science investigations at Mars. The goal of the study is to utilize smaller, affordable missions in performing highpriority science investigations as defined in the National Academy of Sciences Decadal Survey, Mars Exploration Program Analysis Group (MEPAG) goals, and Human Exploration and Operations (HEO) Strategic Knowledge Gaps. The study targets the use of small spacecraft with greater science capability than currently achievable with CubeSats. The target spacecraft wet mass is approximately 100 to 350 kilograms. Methods of access to Mars considered in this study include a self-propelled transit from Earth geosynchronous transfer orbit (GTO) to Mars as a secondary payload in a rideshare configuration. The study investigates mission concepts, science objectives, mission designs, concept of operations, enhancing technologies, and mission costs, along with launch vehicle interfaces. The cost estimates of the mission concepts studied range from below $100 million to less than $300 million for development through launch. This paper concludes with an outline of several examples of small spacecraft mission concepts to Mars that demonstrate significant scientific capability, are technically feasible, and fit within the desired cost range.

Edwards, Charles D.↗
NASA NTRS2019

An Exploration of Mission Concepts That Could Utilize Small RPS

The NASA Radioisotope Power Systems (RPS) Program Mission Analysis Team at the Jet Propulsion Laboratory (JPL) requested a JPL Innovation Foundry Architecture Team (A-Team) study to assess mission pull for small RPS (1 mWe - 40 We) in order to inform the RPS Program Office on what future power system developments should be focused on. The A-Team is JPL’s concurrent engineering design team for science definition and early mission concept development, targeting concept maturation levels of 1 through 3. The requested small RPS study was tasked to identify the architecture space of potential small RPS missions, and suggest power levels that could enable or enhance potential future small spacecraft missions. This paper describes the collaborative engineering processes that the A-Team and Mission Analysis Team used to reach results quickly and the findings to inform the RPS Program about mission concept power requirements on RPS for small missions.

Bairstow, Brian K.↗
NASA NTRS2017

Wavefront sensing for a future HabEx space telescope.

HabEx is a concept study for a next generation space telescope having a 4 to 6.5 m primary mirror diameter. Primarily designed for exoplanet science, but also carrying general astrophysics instruments, it will have stability requirements orders of magnitude more stringent than any previously flown space-based observatory. Wavefront control, including active sensing/control of wavefront jitter and drift, will be essential to achieving and maintaining coronagraph performance. There are currently two complementary techniques that can be used to sense the wavefront drift. An attractive method is to use starlight rejected from the coronagraph to sense changes in the wavefront incident on the coronagraph mask. This method suffers from photon noise especially when imaging dim stars. It is also unavailable during slews between target stars. Laser metrology is a complementary system in which a laser “truss” enables rigid body displacements of the optics to be measured from changes in the separation of pairs of optical fiducials which can be separated by many meters. In closed loop with actuated optics, laser metrology actively maintains rigid body alignment of the front-end optics, thereby eliminating the dominant source of wavefront drift. This method can maintain rigid body stability of the telescope optics and thereby wavefront control, even during slews between targets.

Martin, Stefan↗
NASA NTRSDate not supplied

Balloon Data Readout via Free-Space Optical Communications

Free-space optical communications is a mature technology, using eye-safe beams and small-terminals, that has the potential to increase balloon data readout rates by orders of magnitude. Large commercial memory buffers paired with incredibly high-rate bursted communications – 100 Gbps has already been demonstrated with higher rates possible with existing commercial technologies – could revolutionize how science missions are designed and run. We will give an overview of the technology, show some examples of how it could already be useful to missions, and propose next steps to make affordable and robust systems be available to the balloon community.

Don Boroson↗
NASA NTRS2019

Development of an evaporator using porous wick structure for a two-phase mechanically pumped fluid loop

The Jet Propulsion Laboratory is developing a two-phase mechanically pumped fluid loop (2PMPFL) thermal control system to enable novel mission designs and greater science return for NASA. Pumped two-phase fluid loops have the potential to provide robust and effective thermal control that combine the best aspects of passive two-phase systems (heat pipes) and mechanically pumped single-phase fluid loops. The current requirements include the development of a system with multiple 1 m2 evaporators, each of which is capable of remaining spatially and temporally isothermal while accommodating heat loads of up to 500 W and local fluxes of up to 5 W/cm2. The goal is to attain this using less than 5 W of power. Such a system would be able to accommodate the next generation of payload and bus electronics while using minimal resources.

Birur, Gajanana↗
NASA NTRSDate not supplied

The Laser Interferometer Space Antenna (LISA): Current plans and prospects for quantum sensing in future space-based gravitational wave observatories

ESA’s third large class mission is a space-based gravitational wave observatory with NASA as a partner. This talk will describe the current plans for this mission, including the expected science, the instrument design, and a schedule for the development and launch. The noise floor of the system will be described and opportunities for improvement, including possible applications os quantum sensing and measurement techniques.

Jeff Livas↗
NASA NTRSDate not supplied

Atmospheric Entry Heat Flux Sensor Calibration and Flight Data Analysis

- Recent NASA missions have included total heat flux sensors (THFS) embedded in the thermal protection system (TPS) to measure the combined convective and radiative heating during atmospheric entry. These measurements are key to fundamental entry science and mission design. - The THFSs for the Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2) sensor suite on the Mars 2020 entry vehicle and the Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) technology demonstration mission were passively cooled Schmidt–Boelter gauges. - As presented at IPPW 2021, THFS calibration is notoriously difficult and includes several sources of measurement uncertainty [1]. - Recent work has been conducted to understand and quantify the measurement uncertainty in the MEDLI2 and LOFTID Schmidt-Boelter THFSs.

R. A. Miller↗
NASA NTRS1985

System analysis study of space platform and station accommodations for life sciences research facilities. Volume 2: Study results, attachment 2. Phase A: Conceptual design and programmatics

The study results from the conceptual design and programmatics segment of the Space Platform and Station Accommodation for Life Sciences Research Facilities. The results and significant findings of the conceptual design and programmatics were generated by these tasks: (1) the review and update engineering and science requirements; (2) analysis of life sciences mission transition scenario; (3) the review and update of key trade issues; (4) the development of conceptual definition and designs; and (5) the development of the work breakdown schedule and its dictionary, program schedule, and estimated costs.

Wiley, Lowell F.↗
NASA NTRS2016

Guidelines and Suggestions for Balloon Gondola Design

The Columbia Scientific Balloon Facility is responsible for ensuring that science payloads meet the appropriate design requirements. The ultimate goal is to ensure that payloads stay within the allowable launch limits as well as survive the termination event. The purpose of this presentation is to provide some general guidelines for Gondola Design. These include rules and reasons on why CSBF has a certain preference and location for certain components within the gondola as well as other suggestions. Additionally, some recommendations are given on how to avoid common pitfalls.

Gondola↗
NASA NTRS2010

Design and Preliminary Thermal Performance of the Mars Science Laboratory Rover Heat Exchangers

The challenging range of proposed landing sites for the Mars Science Laboratory Rover requires a rover thermal management system that is capable of keeping temperatures controlled across a wide variety of environmental conditions. On the Martian surface where temperatures can be as cold as -123 degrees Centigrade and as warm as 38 degrees Centigrade, the Rover relies upon a Mechanically Pumped Fluid Loop (MPFL) and external radiators to maintain the temperature of sensitive electronics and science instruments within a -40 degrees Centigrade to 50 degrees Centigrade range. The MPFL also manages significant waste heat generated from the Rover power source, known as the Multi Mission Radioisotope Thermoelectric Generator (MMRTG). The MMRTG produces 110 Watts of electrical power while generating waste heat equivalent to approximately 2000 Watts. Two similar Heat Exchanger (HX) assemblies were designed to both acquire the heat from the MMRTG and radiate waste heat from the onboard electronics to the surrounding Martian environment. Heat acquisition is accomplished on the interior surface of each HX while heat rejection is accomplished on the exterior surface of each HX. Since these two surfaces need to be at very different temperatures in order for the MPFL to perform efficiently, they need to be thermally isolated from one another. The HXs were therefore designed for high in-plane thermal conductivity and extremely low through-thickness thermal conductivity by using aerogel as an insulator inside composite honeycomb sandwich panels. A complex assembly of hand welded and uniquely bent aluminum tubes are bonded onto the HX panels and were specifically designed to be easily mated and demated to the rest of the Rover Heat Recovery and Rejection System (RHRS) in order to ease the integration effort. During the cruise phase to Mars, the HX assemblies serve the additional function of transferring heat from the Rover MPFL to the separate Cruise Stage MPFL so that heat generated deep inside the Rover can be dissipated via the Cruise Stage radiators. Significant fabrication challenges had to be overcome in order to make the HX design a reality. The cruise phase thermal performance of the Rover HXs was verified in the cruise phase system level thermal vacuum test that was performed at JPL in January of 2009. The Rover HXs were modeled in I-DEAS TMG and predictions are compared to actual data from the test.

Heat Rejection System↗
NASA NTRSDate not supplied

NASA’s Astrophysics Cross-Observatory Science Support (ACROSS) Initiative

The Astro2020 Decadal Survey recommended an investment in Time Domain and Multi-Messenger Astrophysics (TDAMM) as the top-priority sustaining activity in space for the coming decade. One aspect of NASA’s response to this recommendation is a pilot project, the Astrophysics Cross-Observatory Science Support (ACROSS) Initiative, designed to provide support to both missions and observers as they pursue TDAMM science. Here, we present the results of our study and initial plans for ACROSS activities, including services to facilitate and improve cross-mission follow-up planning and execution; a multi-messenger web portal with links to existing mission resources, community tools, and information targeted for TDAMM General Observers; development of “Smart Target of Opportunity submission page” proof-of-concepts; and ongoing development of a potential TDAMM general observing competitive grant solicitation. We invite further discussion with both scientists and mission representatives to better understand their needs and concerns as ACROSS begins its pilot phase.

Brian Humensky↗
NASA NTRS2025

ACROSS: Enabling Time Domain and Multi-Messenger Astrophysics

The U.S. Astro2020 Decadal Survey recommended an investment in Time Domain and Multi-Messenger Astrophysics (TDAMM) as the top-priority sustaining activity in space for the coming decade. One aspect of NASA’s response to this rec-ommendation is a pilot project, the Astrophysics Cross-Observatory Science Support (ACROSS) Initiative, designed to provide support to both missions and observers as they pursue TDAMM science. In this talk, we present our observations of needs in the community and initial plans for ACROSS activities, including services to facilitate and improve cross-mission follow-up planning and execution; a multi-messenger web portal with links to existing mission resources, community tools, and information tar-geted for TDAMM General Observers; development of "Smart Target of Opportunity submission page" proof-of-concepts; and ongoing development of a potential TDAMM general observing competitive grant solicitation. While the initial focus has been to en-hance coordination between NASA missions, we are eager to work with ground-based and international partners as well. We invite discussion with both missions and ob-servers to better understand their needs and concerns as ACROSS progresses. Here we present our efforts on the web-portal and API, along with our development to support NASA’s BurstCube mission.

T B Humensky↗
NASA NTRS1990

Project LASER

NASA formally launched Project LASER (Learning About Science, Engineering and Research) in March 1990, a program designed to help teachers improve science and mathematics education and to provide 'hands on' experiences. It featured the first LASER Mobile Teacher Resource Center (MTRC), is designed to reach educators all over the nation. NASA hopes to operate several MTRCs with funds provided by private industry. The mobile unit is a 22-ton tractor-trailer stocked with NASA educational publications and outfitted with six work stations. Each work station, which can accommodate two teachers at a time, has a computer providing access to NASA Spacelink. Each also has video recorders and photocopy/photographic equipment for the teacher's use. MTRC is only one of the five major elements within LASER. The others are: a Space Technology Course, to promote integration of space science studies with traditional courses; the Volunteer Databank, in which NASA employees are encouraged to volunteer as tutors, instructors, etc; Mobile Discovery Laboratories that will carry simple laboratory equipment and computers to provide hands-on activities for students and demonstrations of classroom activities for teachers; and the Public Library Science Program which will present library based science and math programs.

Source record↗
NASA NTRS2005

Hall Thruster Technology for NASA Science Missions

The performance of a prototype Hall thruster designed for Discovery-class NASA science mission applications was evaluated at input powers ranging from 0.2 to 2.9 kilowatts. These data were used to construct a throttle profile for a projected Hall thruster system based on this prototype thruster. The suitability of such a Hall thruster system to perform robotic exploration missions was evaluated through the analysis of a near Earth asteroid sample return mission. This analysis demonstrated that a propulsion system based on the prototype Hall thruster offers mission benefits compared to a propulsion system based on an existing ion thruster.

Manzella, David↗
NASA NTRS1998

The geoscience laser altimeter system (GLAS)

GLAS is a space-based lidar designed for NASA's Earth Science Enterprise's Icesat Mission. It is being designed to precisely measure the heights of the polar ice sheets, to determine the height profiles of the Earth's land topography, and to profile the vertical structure of clouds and aerosols on a global scale. GLAS will fly on a small dedicated spacecraft in a polar orbit at 598 km altitude with an inclination of 94 degrees. The instrument is being developed to launch in July 2001 and to operate continuously at 40 Hz for a minimum of 3 years with a goal of 5 years.

Abshire, James B.↗
NASA NTRS2010

Thermal Design Considerations of the Hubble Space Telescope (HST) Science Instrument Control and Data Handler (SI C and DH-2)

Following a failure in side 1 of the HST SI C&DH in September 2008, HST Servicing Mission 4 (SM-4) was delayed so that a SI C&DH Orbital Replacement Unit (ORU) could be qualified for flight. This second generation SI C&DH (SI C&DH-2) included several enhancements which increased its thermal dissipation near critical components. In order to maintain the SI C&DH-2 within its operational temperature limits, several thermal modifications were installed prior to its final qualification testing. This paper presents the thermal modifications performed on the SI C&DH-2, as well as the thermal ground test results and a correlation of the SI C&DH-2 thermal design to flight telemetry.

Gregory, Teri H.↗
NASA NTRS2013

Powered Flight Design and Reconstructed Performance Summary for the Mars Science Laboratory Mission

The Powered Flight segment of Mars Science Laboratory's (MSL) Entry, Descent, and Landing (EDL) system extends from backshell separation through landing. This segment is responsible for removing the final 0.1% of the kinetic energy dissipated during EDL and culminating with the successful touchdown of the rover on the surface of Mars. Many challenges exist in the Powered Flight segment: extraction of Powered Descent Vehicle from the backshell, performing a 300m divert maneuver to avoid the backshell and parachute, slowing the descent from 85 m/s to 0.75 m/s and successfully lowering the rover on a 7.5m bridle beneath the rocket-powered Descent Stage and gently placing it on the surface using the Sky Crane Maneuver. Finally, the nearly-spent Descent Stage must execute a Flyaway maneuver to ensure surface impact a safe distance from the Rover. This paper provides an overview of the powered flight design, key features, and event timeline. It also summarizes Curiosity's as flown performance on the night of August 5th as reconstructed by the flight team.

Mars Science Laboratory (MSL)↗
NASA NTRS1998

Design and Specification of Optical Bandpass Filters for Hubble Space Telescope (HST) Advanced Camera for Surveys (ACS)

Advanced optical bandpass filters for the Hubble Space Telescope (HST) Advanced Camera for Surveys (ACS) have been developed on a filter-by-filter basis through detailed studies which take into account the instrument's science goals, available optical filter fabrication technology, and developments in ACS's charge-coupled-device (CCD) detector technology. These filters include a subset of filters for the Sloan Digital Sky Survey (SDSS) which are optimized for astronomical photometry using today's charge-coupled-devices (CCD's). In order for ACS to be truly advanced, these filters must push the state-of-the-art in performance in a number of key areas at the same time. Important requirements for these filters include outstanding transmitted wavefront, high transmittance, uniform transmittance across each filter, spectrally structure-free bandpasses, exceptionally high out of band rejection, a high degree of parfocality, and immunity to environmental degradation. These constitute a very stringent set of requirements indeed, especially for filters which are up to 90 mm in diameter. The highly successful paradigm in which final specifications for flight filters were derived through interaction amongst the ACS Science Team, the instrument designer, the lead optical engineer, and the filter designer and vendor is described. Examples of iterative design trade studies carried out in the context of science needs and budgetary and schedule constraints are presented. An overview of the final design specifications for the ACS bandpass and ramp filters is also presented.

Leviton, Douglas B.↗