Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffusion bonding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Neutron diffraction study of the monoclinic to tetragonal structural transition in LaNbO{sub 4} and its relation to proton mobility

The fergusonite-scheelite structural transition of LaNbO{sub 4} was characterized by high-intensity variable temperature neutron powder diffraction in an effort to link structural changes to proton transport in the low temperature monoclinic and high temperature tetragonal polymorphs. The pronounced decrease in enthalpy of proton mobility with increasing temperature in monoclinic LaNbO{sub 4}, identified by Fjeld et al. , was found to coincide with the decrease in a key inter-tetrahedral oxygen separation. At temperatures above the transition, this oxygen to oxygen distance remains constant, behavior that is consistent with the invariant nature of the calculated enthalpy of mobility for the tetragonal phase. This oxygen separation is therefore proposed as the key structural parameter determining the success rate of proton transfer and ultimately the proton diffusion in LaNbO{sub 4}. Infrared measurements performed on acceptor-doped LaNbO{sub 4} show an absorption in the region 2500 to 3700 cm{sup -1} attributed to the O-H stretching motion influenced by hydrogen bonding. - Graphical Abstract: The structural phase transition from monoclinic fergusonite to tetragonal scheelite crystal structure clearly influences the proton conductivity of acceptor-doped LaNbO{sub 4} (see Figure). The present article attempts to explain why. Highlights: Black-Right-Pointing-Pointer Transition from monoclinic to tetragonal structure studied using neutron diffraction. Black-Right-Pointing-Pointer Change in proton mobility linked to contraction of a key oxygen separation. Black-Right-Pointing-Pointer Infra-red spectra reveal intermediate strength hydrogen bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aggregation of Size-Selected Oxide Clusters Deposited onto Au(111)

Kinetic Monte Carlo (kMC) simulations along with density functional theory (DFT) calculations were used to investigate the aggregation of size-selected Nb 3 O y (y = 5, 6, 7) clusters deposited onto the Au(111) surface. Recent STM experiments showed that the cluster binding sites and sizes of the cluster assemblies on the Nb 3 O y /Au(111) surfaces strongly depend on the stoichiometry of the clusters, i.e., the oxygen-to-niobium ratio. To better understand the origins of these differences, kMC simulations of the nucleation and growth of cluster assemblies were performed using energy barriers for diffusion and intercluster interactions estimated from DFT calculations of cluster binding and dimerization energies, respectively. Comparisons of the kMC simulations with STM images of the as-deposited Nb 3 O y /Au(111) surfaces at RT and after high temperature annealing were used to further optimize the energetics and gauge the importance of nearest neighbor interactions. The kMC simulations demonstrate that the assembly of Nb 3 O y clusters on Au(111) are largely controlled by the magnitude of the barriers for diffusion and interparticle-bond formation, while changes at higher temperatures are sensitive to the binding energies between nearest neighbors. Simulations for the Nb 3 O 5 and Nb 3 O 6 clusters, which exhibit smaller cluster assembly sizes in STM, required larger diffusion barriers as well as different barriers for interparticle binding, which reflected differences in DFT calculated dimerization energies. Furthermore, the results demonstrate the effectiveness of combined DFT and kMC calculations for understanding how the stoichiometry affects the aggregation of small oxide clusters on a metal surface.

36 MATERIALS SCIENCE↗

Surface diffusion activation energy determination using ion beam microtexturing

The activation energy for impurity atom (adatom) surface diffusion can be determined from the temperature dependence of the spacing of sputter cones. These cones are formed on the surface during sputtering while simultaneously adding impurities. The impurities form clusters by means of surface diffusion, and these clusters in turn initiate cone formation. Values are given for the surface diffusion activation energies for various materials on polycrystalline Cu, Al, Pb, Au, and Ni. The values for different impurity species on each of these substrates are approximately independent of impurity species within the experimental uncertainty, suggesting the absence of strong chemical bonding effects on the diffusion.

Rossnagel, S. M.↗

Water Dynamics in Polyacrylamide Hydrogels

Polymeric hydrogels have wide applications including electrophoresis, biocompatible materials, water superadsorbents, and contact lenses. The properties of hydrogels involve the poorly characterized molecular dynamics of water and solutes trapped within the three-dimensional cross-linked polymer networks. In this study, we apply ultrafast infrared two-dimensional infrared (2D IR) vibrational echo and polarization-selective pump-probe (PSPP) spectroscopies to investigate the ultrafast molecular dynamics of water and a small molecular anion solute, selenocyanate (SeCN - ), in polyacrylamide hydrogels. For all mass concentrations of polymer studied (5% and above), the hydrogen bonding network reorganization (spectral diffusion) dynamics and reorientation dynamics reported by both water and SeCN - solvated by water are significantly slower than in bulk water. As the polymer mass concentration increases, molecular dynamics in the hydrogels slow further. The magnitudes of the slowing, measured with both water and SeCN - , are similar. However, the entire hydrogen bonding network of water molecules appear to slow down as a single ensemble, without a difference between the core water population and the interface water population at the polymer-water surface. In contrast, the dissolved SeCN - do exhibit two-component dynamics, where the major component is assigned to the anions fully solvated in the confined water nanopools. Lastly, the slower component has a small amplitude which is correlated with the polymer mass concentration, and is assigned to adsorbed anions strongly interacting with the polymer fiber networks.

14 SOLAR ENERGY↗

Diffusion and Adsorption of Uranyl Carbonate Species in Nanosized Mineral Fractures

Atomistic simulations were performed to study the diffusion and adsorption of Ca{sub 2}UO{sub 2}(CO{sub 3}){sub 3} and of some of its constituent species, i.e., UO{sub 2}{sup 2+}, CO{sub 3}{sup 2-}, and UO{sub 2}CO{sub 3}, in feldspar nano-sized fractures. Feldspar is important to uranium remediation efforts at the U.S. Department of Energy Hanford site as it has been found in recent studies to host contaminants within its intragrain fractures. In addition, uranyl carbonate species are known to dominate U(VI) speciation in conditions relevant to the Hanford site. Molecular dynamics (MD) simulations showed that the presence of the feldspar surface diminishes the diffusion coefficients of all the species considered in this work and that the diffusion coefficients do not reach their bulk aqueous solution values in the center of a 2.5 nm fracture. Moreover, the MD simulations showed that the rate of decrease in the diffusion coefficients with decreasing distance from the surface is greater for larger adsorbing species. Free energy profiles of the same species adsorbing on the feldspar surface revealed a large exothermic free energy of adsorption for UO{sub 2}{sup 2+} and UO{sub 2}CO{sub 3}, which are able to adsorb to the surface with their uranium atom directly bonded to a surface hydroxyl oxygen, whereas adsorption of CO{sub 3}{sup 2-} and Ca{sub 2}UO{sub 2}(CO{sub 3}){sub 3}, which attach to the surface via hydrogen bonding from a surface hydroxyl group to a carbonate oxygen, was calculated to be either only slightly exothermic or endothermic.

08 HYDROGEN↗

Friction Stir Spot Welding of DP780 Carbon Steel

Friction stir spot welds were made in uncoated and galvannealed DP780 sheets using polycrystalline boron nitride stir tools. The tools were plunged at either a single continuous rate or in two segments consisting of a relatively high rate followed by a slower rate of shorter depth. Welding times ranged from 1 to 10 s. Increasing tool rotation speed from 800 to 1600 rev min{sup -1} increased strength values. The 2-segment welding procedures also produced higher strength joints. Average lap shear strengths exceeding 10 {center_dot} 3 kN were consistently obtained in 4 s on both the uncoated and the galvannealed DP780. The likelihood of diffusion and mechanical interlocking contributing to bond formation was supported by metallographic examinations. A cost analysis based on spot welding in automobile assembly showed that for friction stir spot welding to be economically competitive with resistance spot welding the cost of stir tools must approach that of resistance spot welding electrode tips.

36 MATERIALS SCIENCE↗

Temperature dependent interfacial microstructure in HIP-bonded Al6061/Zr joints

Pressing (HIP) at 450 °C and 560 °C under 103 MPa for 90 minutes to evaluate interfacial diffusion and microstructural evolution. Sound metallurgical bonding was achieved at both temperatures, with Zr serving as an effective diffusion barrier. Microstructural analysis revealed the the formation of a (Al,Si)3Zr intermetallic layer at the Al/Zr interface, whose thickness increased from ~100 nm at 450 °C to ~2100 nm at 560 °C, consistent with temperature-driven diffusion kinetics. The thin and continuous reaction layer observed at 450 °C indicates controlled interdiffusion and minimal reaction zone growth, favorable for maintaining interface stability and ductility. At 560 °C, enhanced atomic mobility led to pronounced intermetallic development, confirming diffusion-controlled growth behavior. These results provide valuable insights for optimizing Al/Zr interface design and diffusion barrier performance in advanced structural and energy systems.

Al/Zr interface↗

Experimental determination of the effects of moisture on composite-to-composite adhesive joints

The primary mode of moisture ingress into bonded composite joints is determined using a nuclear probe for deuterium (NPD) to measure the localized D2O content along the length of the adhesive (FM-300 and EA-9601) and through the thickness of bonded composite speciments. Calculated diffusivities and NPD measured equilibrium moisture contents are used to predict the moisture profiles along the length of the adhesives as a function of exposure time, temperature, and relative humidity. These results are compared with the observed moisture profiles to evaluate the extent of enhanced edge diffusion. The FM-300 adhesive exhibits good agreement between measured and predicted profiles at 49 C, 70% and 90% RH, and 77 C, 70% RH. At 77 C, 90% RH, the measured moisture content near the adhesive edge is substantially larger than the predicted level. The EA-9601 adhesive also shows good agreement at 49 C, 70% and 90% RH, but at 77 C, the concentration of D20 near the edges is enhanced at each humidity level. The effect of moisture content on the bond shear strength at room temperature and at elevated temperature is evaluated.

Deiasi, R. J.↗

In situ transmission electron microscopy observation of ZnO polar and non-polar surfaces structure evolution under electron beam irradiation

In this paper, using in situ transmission electron microscopy, we investigated the dynamic reconstruction and evolution of ZnO polar and non-polar surfaces under high-energy electron beam irradiation. Electron beam radiolysis creates oxygen vacancies and a Zn rich (0001) surface. Positive polar charges at the (0001) surface expel loosely bonded Zn ions to diffuse away from the (0001) polar surface. As a result, mass loss was observed around the (0001) surface. Dehydration by the electron beam breaks the charge balance on the ( 000 1 ¯ ) polar surface. The negative charges on the ( 000 1 ¯ ) surface suppress the radiolysis effect and further absorb Zn ions to the surface to neutral the polar charges. The ideal stacking sequences of Zn ions in hexagonal ZnO structure can be considered as ABAB… along its c axis, while the absorbed individual Zn ion on the ( 000 1 ¯ ) surface occupies the C site to form three bonds with surface O ions beneath, instead of one bond in the ideal structure. With more Zn ion absorption and surface oxidization, new nanocrystals grow up from the ( 000 1 ¯ ) polar surface. Finally, new nanocrystals nucleated at the ( 01 1 ¯ 0 ) non-polar surface are driven by the electric field of the polar charges as well, for the Zn ions were always observed to absorb on the negatively charged [ 000 1 ¯ ] end of the newly formed ( 01 1 ¯ 0 ) surface layer.

74 ATOMIC AND MOLECULAR PHYSICS↗

Rock-salt structure lithium deuteride formation in liquid lithium with high-concentrations of deuterium: a first-principles molecular dynamics study

Because of lithium's possible use as a first wall material in a fusion reactor, a fundamental understanding of the interactions between liquid lithium (Li) and deuterium (D) is important. Here, we predict structural and dynamical properties of liquid Li samples with high concentrations of D, as derived from first-principles molecular dynamics simulations. Liquid Li samples with four concentrations of inserted D atoms (LiD$_{\beta}$ , $\beta =0.25$ , 0.50, 0.75, and 1.00) are studied at temperatures ranging from 470 to 1143 K. Densities, diffusivities, pair distribution functions, bond angle distribution functions, geometries, and charge transfer between Li and D atoms are calculated and analyzed. The analysis suggests liquid–solid phase transitions can occur at some concentrations and temperatures, forming rock-salt LiD within liquid Li. Finally, we observed the formation of some D 2 molecules at high D concentrations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of Hydrogen Bonding on Nuclear Data Development of Liquid Anhydrous HF

Anhydrous Hydrogen Fluoride (HF) at high temperatures and pressures is used to process and manufacture nuclear fuel. As HF is often used directly with uranium, correct neutron thermal scattering cross sections are crucial to criticality safety applications. Classical molecular dynamics (CMD) simulation of the flexible HF system was used to create the thermal scattering law (TSL) and cross sections. The initial 2-site model is used in LAMMPS, and it can not capture the H-bond. To correctly represent the H-bond effects, a second, 3-site model was constructed in GROMACS. The 3-site model handled H-bonds by connecting a massless charge to the molecule. Key model parameters were compared to experimental data to verify the approach and models. To get the normalized VACF, the model was compared using hydrogen and fluorine bond length, density, potential energy, and diffusion coefficient. The phonon DOSs for both models were derived from the normalized VACF. DOSs were used to estimate the TSL ( S ( α, β )) and neutron thermal scattering cross sections for hydrogen in HF. The TSLs were evaluated using the FLASSH code with the Schofield diffusion model. It was observed that the representation of the hydrogen bonding changes the TSL's diffusional contributions. This is represented in the low energy scattering cross section, where intermolecular binding effects shift the cross section.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Flexibility of oxygen sublattice and hydrogen bond length predict proton mobility in ternary metal oxides

Discovery of fast proton conductors is important for advancing clean energy technologies. This requires a better understanding of proton migration mechanisms. While structural and chemical traits of ternary metal oxides have been related to proton migration barriers, lattice dynamical effects have not been resolved quantitatively. Here, in this work, we introduce a phonon-based dynamic descriptor, termed ‘‘thermal O…O fluctuation,’’ quantifying the flexibility of donor-acceptor oxide-ion pairs. This enables direct comparison of O-sublattice flexibility across diverse metal oxides. Using regression models, we ranked physical descriptors as predictors of proton mobility, finding that H-bond length and thermal O…O fluctuation were the strongest descriptors. Further analysis revealed a critical O…O spacing of 2.4 A˚ at the transition state, which is easier to reach by more flexible donor-acceptor pairs, enabling facile proton transfer. Our results demonstrate oxygen sublattice flexibility as a dynamic descriptor and provide guiding principles for enhancing proton mobility in ternary metal oxides.

diffusivity↗

Preparation and Testing of Corrosion and Spallation-Resistant Coatings

This Energy & Environmental Research Center (EERC) project is designed to determine if plating APMT®, a specific highly oxidation-resistant oxide dispersion-strengthened FeCrAl alloy made by Kanthal, onto nickel-based superalloy turbine parts is a viable method for substantially improving the lifetimes and maximum use temperatures of the parts. The method for joining the APMT plate to the superalloys is called evaporative metal bonding and involves placing a thin foil of zinc between the plate and the superalloy, clamping them together, and heating in an atmosphere-controlled furnace. Upon heating, the zinc melts and dissolves the oxide skins of the alloys at the bond line, allowing the two alloys to diffuse into each other. The zinc then diffuses through the alloys and evaporates from their surfaces. During this annual reporting period, the finite element model was completed and used to design clamping jigs to hold the APMT plate to the larger blocks of superalloys during the bonding process. The clamping system was machined from titanium–zirconium–molybdenum and used to bond the APMT plate to the superalloy blocks. The bond between the APMT plate was weak for one of each of the superalloy blocks. We believe that this occurred because enough oxidation had occurred on the surface of the parts as a result of a 1-month time period between sandblasting to prepare the parts and the actual bonding process. The other blocks were, therefore, bonded within 1 day of preparing the parts for bonding, and their joints appear strong. Scanning electron microscopy analyses of representative joints showed that no zinc remained in the alloys after bonding. Also, phases rich in hafnium and tantalum had precipitated near the bond line in the APMT. Iron from the APMT had diffused into the superalloys during bonding, more extensively in the CM247LC than in the Rene 80. Nickel from the superalloys had diffused into the APMT, again more extensively in the joint with the CM247LC than with the Rene 80. One-inch-diameter buttons were machined from each of the bonded blocks and sent to Siemens for standard oxidation, spallation, and corrosion testing, which should be complete in the spring of 2016.

Hurley, John↗

The Effect of APS-HVOF Bond Coating Thickness Ratio on TBC Furnace Cycle Lifetime

In this work, combinations of NiCoCrAlY APS and high-velocity oxygen fuel (HVOF) bond coatings were deposited on alloy 247 disk substrates with APS yttria-stabilized zirconia (YSZ) top coatings to assess the benefit of air plasma sprayed (APS) ‘flash’ bond coatings. Using 1-h cycles at 1100 °C in air with 10% H 2 O and HVOF-only and APS-only bond coatings as a baseline, it was found that APS flash coatings extended the average coating lifetime by 16% to 35% with the thicker flash coating performing best. Principal component analysis and energy dispersive spectroscopy (EDS) compositional mapping on coatings characterized after 0, 100, 300 and 500 cycles and after failure showed that the Al in the bond coatings was depleted due to both oxidation and back diffusion into the substrate. The APS-only bond coating had significant oxidation throughout the bond coating and was so depleted in Al, that Al diffused from the substrate to the coating. Residual stress maps of the thermally-grown alumina scale were obtained every 100 cycles using photo-stimulated luminescence piezospectroscopy (PLPS) revealing that the Thick Flash coating had the slowest rate of damage accumulation in the oxide scale.

alumina scale↗

Preparation and testing of corrosion and spallation-resistant coatings

The goal of this project was to take a recently developed method of bonding oxide dispersion-strengthened (ODS) FeCrAl plating to nickel superalloys closer to commercial use in syngas-fired turbines. The project was designed to better understand and develop the bonding process and to determine if plating APMT®, a specific highly oxidation-resistant ODS FeCrAl alloy made by Kanthal, onto nickel-based superalloy turbine parts is a viable method for substantially improving the lifetimes and maximum use temperatures of the parts. The superalloys investigated for protection were CM247LC and Rene® 80, both alumina scale-forming alloys. The method for bonding the APMT plate to the superalloys is called evaporative metal bonding, which involves placing a thin foil of zinc between the plate and the superalloy, clamping them together, and heating in an atmosphere-controlled furnace. Upon heating, the zinc melts and dissolves the oxide skins of the alloys at the bond line, allowing the two alloys to diffuse into each other. The zinc then diffuses through the alloys and evaporates from their surfaces, creating a bond between the APMT and the superalloy that is stronger than the APMT itself. Testing showed that the diffusivity of zinc in both APMT and CM247LC is quite similar at 700°C but 15 times higher in the APMT at 1214°C. Coefficients of thermal expansion were determined for each of the alloys as a function of temperature. This information was entered into a finite-element model using ANSYS, which was used to design a clamping jig for pressing the APMT to the superalloys at the bonding temperature. Scanning electron microscopy analyses of representative joints showed that no zinc remained in the alloys after bonding Unfortunately, the analyses also showed some small pieces of broken aluminum oxide scale near the bond lines, indicating that its scale was not sufficiently removed during prebonding cleaning. Samples from each of the bonded blocks were sent to Siemens for its standard oxidation, spallation, and corrosion testing, which was scheduled for completion in the spring of 2016. However, because of commercial demands, the tests were not completed by the time of this report except some initial spallation tests at 1150°C. In those tests, several of the APMT plates separated from the CM247LC, likely because of the remaining aluminum oxide scale on the surface of the CM247LC. This implies that surface preparation may need to include machining to remove the oxide scale before bonding rather than just sandblasting. In previous tensile testing at 950°C, the breaks in the tensile samples always occurred in the APMT and not at the joints. Gasifier sampling was completed to determine what types of trace contaminants may occur in cleaned and combusted syngas and that could lead to corrosion or deposition in turbines firing coal syngas. The sampling was done from a pressurized fluidized-bed gasifier and a pressurized entrained-flow gasifier. The particles captured on a filter from syngas were typically 0.2 to 0.5 μm in diameter, whereas those captured from the combusted syngas were slightly larger and more spherical. X-ray photoelectron spectroscopy done at Oak Ridge National Laboratory showed that the particles do not contain any metals and have an atomic composition almost identical to that of the polycarbonate filter. This indicates that the particles are primarily soot-based and not formed from volatilization of metals in the gasifiers.

20 FOSSIL-FUELED POWER PLANTS↗

Anion and Cation Size Effects on Viscoelasticity and Ion Transport of Imine Vitrimer Electrolytes

Vitrimers are a subclass of covalent adaptable networks where bond exchange occurs without breaking, thereby offering polymer materials with enhanced mechanical strength, thermal stability, and reprocessability compared to conventional electrolytes. Despite recent progress, we lack a complete understanding of the role of ions in controlling the physical and chemical properties of vitrimers. In this work, we study how different salts affect the viscoelasticity, morphology, and ionic conductivity of imine vitrimers. Our results show that addition of salt decreases relaxation times at elevated temperatures due to the catalytic effect of the cations, with smaller cations leading to faster relaxation. However, the activation energy for terminal relaxation increases with smaller cation size. This apparent discrepancy is attributed to the complex interplay among bond exchange kinetics, chain diffusion, and salt dissociation. Anions act as plasticizers by reducing the shear modulus, except lithium bromide. Ionic conductivity increases with larger anions due to smaller salt dissociation energies, whereas the cation type has a minor impact as polymer segmental dynamics dominate ionic transport. Imine-based vitrimers are reprocessable and recyclable, maintaining original mechanical properties and ionic conductivity after recovery. Mixed salt vitrimers exhibited tunable viscoelasticity and ionic conductivity intermediate to the analogous pure salt systems. Altogether, this work highlights the role of salt in the dynamic and conductive properties of imine vitrimers.

Anions↗

Adhesively Bonded Copper and Polyimide for Flexible Printed Circuit Boards: A Data-Driven Degradation Study Under Accelerated Aging

The long-term durability of polyimide laminated adhesive based flexible printed circuit boards (PCBs) is critical to the microelectronics industry. The interface of the adhesive layer binding the polyimide and copper layers is particularly vulnerable since decreased bonding strength can lead to deadhesion, performance loss, and premature device failure. Here, in this study, adhesive-bonded polyimide and copper samples are subjected to 1000 h of damp heat exposure (85 °C/85%RH) to evaluate the impact of moisture and copper inclusion on the adhesive bonding performance. Significant copper diffusion through the adhesive layer is observed, which, combined with moisture uptake, is found to substantially weaken interfacial adhesion in copper-containing samples, thereby reducing device lifetime. Observed surface and bulk material changes are correlated to adhesion strength using the network structural equation modeling (netSEM) approach, resulting in a robust predictive model of performance degradation based on measurable materials properties.

Chemistry↗

Trapping gases in metal-organic frameworks with a selective surface molecular barrier layer

The main challenge for gas storage and separation in nanoporous materials is that many molecules of interest adsorb too weakly to be effectively retained. Instead of synthetically modifying the internal surface structure of the entire bulk—as is typically done to enhance adsorption—here we show that post exposure of a prototypical porous metal-organic framework to ethylenediamine can effectively retain a variety of weakly adsorbing molecules (for example, CO, CO 2 , SO 2 , C 2 H 4 , NO) inside the materials by forming a monolayer-thick cap at the external surface of microcrystals. Furthermore, this capping mechanism, based on hydrogen bonding as explained by ab initio modelling, opens the door for potential selectivity. For example, water molecules are shown to disrupt the hydrogen-bonded amine network and diffuse through the cap without hindrance and fully displace/release the retained small molecules out of the metal-organic framework at room temperature. Lastly, these findings may provide alternative strategies for gas storage, delivery and separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗