Attitude perturbations on a slowly spinning multibody satellite.
External perturbation effects of near earth environment on dynamics and attitude of slowly spinning multibody satellite
Anand, D. K.↗
SEARCH · Search NASA
Results for “Dynamic Environments”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
NASA Space Shuttle Technology Conference: Dynamics and Aeroelasticity - Volume 3
The conference encompassed three technology efforts, each published as a separate NASA Technical Memorandum. Volume III - Pynamics and Aeroelasticity (includes dynamic loads and response; aeroelasticity; and flight dynamics and environment).
Source record↗
Dynamic errors in a tuned flexure-mounted strapdown gyro
Motion induced errors in a tuned, flexure-mounted strapdown gyro are investigated. Analytic expressions are developed for errors induced by linear vibrations, angular motion, and detuning. Sensor-level errors (gyro drift rate) and system-level errors (navigation errors) that are stimulated by an actual dynamic motion environment are computed.
Bortz, J. E., Sr.↗
Silverton Conference on Applications of the Zero Gravity Space Shuttle Environment to Problems in Fluid Dynamics
The possible utilization of the zero gravity resource for studies in a variety of fluid dynamics and fluid-dynamic related problems was investigated. A group of experiments are discussed and described in detail; these include experiments in the areas of geophysical fluid models, fluid dynamics, mass transfer processes, electrokinetic separation of large particles, and biophysical and physiological areas.
Eisner, M.↗
The 1975 Ride Quality Symposium
A compilation is presented of papers reported at the 1975 Ride Quality Symposium held in Williamsburg, Virginia, August 11-12, 1975. The symposium, jointly sponsored by NASA and the United States Department of Transportation, was held to provide a forum for determining the current state of the art relative to the technology base of ride quality information applicable to current and proposed transportation systems. Emphasis focused on passenger reactions to ride environment and on implications of these reactions to the design and operation of air, land, and water transportation systems acceptable to the traveling public. Papers are grouped in the following five categories: needs and uses for ride quality technology, vehicle environments and dynamics, investigative approaches and testing procedures, experimental ride quality studies, and ride quality modeling and criteria.
Source record↗
A strut with infinitely adjustable thermal expansivity and length
A tubular strut with an integral mechanism for adjusting its thermal expansivity and length was developed to fulfill the stringent thermal stability requirements anticipated for the metering truss in the Large Space Telescope. Its features may be advantageously applied to a general variety of structures and precision mechanisms where dimensional control of component elements in a dynamic thermal environment is required. Detail, design, fabrication, and test of a developmental strut are discussed.
Nelson, P. T.↗
Analysis of the development of dynamic stall based on oscillating airfoil experiments
The effects of dynamic stall on airfoils oscillating in pitch were investigated by experimentally determining the viscous and inviscid characteristics of the airflow on the NACA 0012 airfoil and on several leading-edge modifications. The test parameters included a wide range of frequencies, Reynolds numbers, and amplitudes-of-oscillation. Three distinct types of separation development were observed within the boundary layer, each leading to classical dynamic stall. The NACA 0012 airfoil is shown to stall by the mechanism of abrupt turbulent leading-edge separation. A detailed step-by-step analysis of the events leading to dynamic stall, and of the results of the stall process, is presented for each of these three types of stall. Techniques for flow analysis in the dynamic stall environment are discussed. A method is presented that reduces most of the oscillating airfoil normal force and pitching-moment data to a single curve, independent of frequency or Reynolds number.
Carr, L. W.↗
Characterization of the physico-chemical properties of polymeric materials for aerospace flight
Materials intended for use in spacecraft are routinely tested at low pressures, and outgassed substances are condensed on cold surfaces at liquid nitrogen temperature, -196 C. These condensates are then analyzed by infrared spectroscopy, and gas chromotography-mass spectroscopy. The polymers were tested and allowed to outgas isothermally at 125 C and 0.000001 torr or less. Valuable information was obtained by extending the temperature range below and above 125 C. The performance of substances of interest to NASA were investigated by thermogravimetric analysis (TGA) from room temperature to 450 C or until the substance decomposed. Thermogravimetric analysis of a substance is a useful technique for studying its thermal nature in both static and dynamic thermal environments. It gives considerable insight into the stability and characterization of substances and the changes they undergo in varying thermal environments. The system is able to get pressures down to 1 micron or 0.001 torr.
Rock, M.↗
Terrier Black Brant VC design characteristics and program status
In the present paper, the design analysis of the Terrier-Black Brant VC, representing the latest addition to the Black Brant rocket family, is discussed, including the aerodynamic, structural, thermal, and operational aspects. An appreciable increase in apogee, as compared to the BBVC and Nike/BBVC, is achieved without any modifications to the well-proven BBV motor or degradation of the thermal or dynamic flight environment.
Payne, B. R.↗
Space Shuttle Solid Rocket Booster Decelerator Subsystem Rocket Sled Test Program
A rocket sled test was performed as part of the development test program of the Space Shuttle Solid Rocket Booster (SRB) Decelerator Subsystem. The test objectives were to evaluate the nose cap/pilot chute deployment behavior and performance. The tests were performed by accelerating the sled and test article to the desired deployment conditions and then ejecting the SRB nose cap by firing three 30,000-lb thrusters. The nose cap then deployed the pilot chute (11.5-ft diam) which, in turn, initiated drogue chute pack deployment. Text conditions simulated the design deployment environment of dynamic pressure of 200 and 270 psf (corresponding sled velocities of 445 and 530 ft/s) and were conducted in configurations representative of SRB (solid rocket booster) angles of attack of 80 and 140 deg, respectively. A test description and summary of results are presented.
Kross, D. A.↗
Expanded study of feasibility of measuring in-flight 747/JT9D loads, performance, clearance, and thermal data
The JT9D jet engine exhibits a TSFC loss of about 1 percent in the initial 50 flight cycles of a new engine. These early losses are caused by seal-wear induced opening of running clearances in the engine gas path. The causes of this seal wear have been identified as flight induced loads which deflect the engine cases and rotors, causing the rotating blades to rub against the seal surfaces, producing permanent clearance changes. The real level of flight loads encountered during airplane acceptance testing and revenue service and the engine's response in the dynamic flight environment were investigated. The feasibility of direct measurement of these flight loads and their effects by concurrent measurement of 747/JT9D propulsion system aerodynamic and inertia loads and the critical engine clearance and performance changes during 747 flight and ground operations was evaluated. A number of technical options were examined in relation to the total estimated program cost to facilitate selection of the most cost effective option. It is concluded that a flight test program meeting the overall objective of determining the levels of aerodynamic and inertia load levels to which the engine is exposed during the initial flight acceptance test and normal flight maneuvers is feasible and desirable. A specific recommended flight test program, based on the evaluation of cost effectiveness, is defined.
Sallee, G. P.↗
On-line pulse control for structural and mechanical systems
This paper studies the feasibility of using open-loop adaptive on-line pulse control for limiting the response of large linear multidegree of freedom systems subjected to general dynamic loading environments. Pulses of short durations are used to control the system when the system response exceeds a given threshold level. The pulse magnitudes are obtained in closed form, leading to large computational efficiencies when compared with optimal control theoretic methods. The technique is illustrated for a structural system subjected to earthquake-like base excitations.
Udwadia, F. E.↗
Orbiter global positioning system design and Ku-band problem investigations, exhibit B, revision 1
The hardware, software, and interface between them was investigated for a low dynamics, nonhostile environment, low cost GPS receiver (GPS Z set). The set is basically a three dimensional geodetic and way point navigator with GPS time, ground speed, and ground track as possible outputs in addition to the usual GPS receiver set outputs. Each functional module comprising the GPS set is described, enumerating its functional inputs and outputs, leading to the interface between hardware and software of the set.
Lindsey, W. C.↗
On the identification of continuous vibrating systems modelled by hyperbolic partial differential equations
This paper deals with the identification of spatially varying parameters in systems of finite spatial extent which can be described by second order hyperbolic differential equations. Two questions have been addressed. The first deals with 'partial identification' and inquires into the possibility of retrieving all the eigenvalues of the system from response data obtained at one location x-asterisk epsilon (0, 1). The second deals with the identification of the distributed coefficients rho(x), a(x) and b(x). Sufficient conditions for unique identification of all the eigenvalues of the system are obtained, and conditions under which the coefficients can be uniquely identified using suitable response data obtained at one point in the spatial domain are determined. Application of the results and their usefulness is demonstrated in the identification of the properties of tall building structural systems subjected to dynamic load environments.
Udwadia, F. E.↗
Planning a probing voyage to Jupiter
Encompassing both an orbiter and an atmospheric probe, Project Galileo will study in detail the phenomena of the plant Jupiter together with those of its moons and its dynamic magnetospheric environment. The probe element will sample the temperature and pressure structure of the Jupiter atmosphere, analyzing the composition of its gases, locating the various cloud decks, measuring radiation balances, and searching for evidence of lightning strikes. Galileo is the first planetary exploration mission to be launched by means of the Space Shuttle. Virtually all Galileo subsystems are fully reprogrammable from the earth to allow mission alterations as new data are obtained. A major technical challenge, however, was posed by probe-to-orbiter communications through the dense Jovian atmosphere.
Draper, R. F.↗
Monitoring Prepregs As They Cure
Quality IR spectra obtained in dynamic heating environment. New technique obtains quality infrared spectra on graphite-fiber-reinforced, polymeric-matrix-resin prepregs as they cure. Technique resulted from modification of diffuse reflectance/Fourier transform infrared (DR/FTIR) technique previously used to analyze environmentally exposed cured graphite composites. Technique contribute to better understanding of prepreg chemistry/temperature relationships and development of more efficient processing cycles for advanced materials.
Young, P. R.↗
Goldstone field test activities: Target search
In March of this year prototype SETI equipment was installed at DSS13, the 26 meter research and development antenna at NASA's Goldstone complex of satellite tracking dishes. The SETI equipment will remain at this site at least through the end of the summer so that the hardware and software developed for signal detection and recognition can be fully tested in a dynamic observatory environment. The field tests are expected to help understand which strategies for observing and which signal recognition algorithms perform best in the presence of strong man-made interfering signals (RFI) and natural astronomical sources.
Tarter, J.↗
Low frequency vibration isolation technology for microgravity space experiments
The dynamic acceleration environment observed on Space Shuttle flights to date and predicted for the Space Station has complicated the analysis of prior microgravity experiments and prompted concern for the viability of proposed space experiments requiring long-term, low-g environments. Isolation systems capable of providing significant improvements in this environment exist, but have not been demonstrated in flight configurations. This paper presents a summary of the theoretical evaluation for two one degree-of-freedom (DOF) active magnetic isolators and their predicted response to both direct and base excitations, that can be used to isolate acceleration sensitive microgravity space experiments.
Grodsinsky, Carlos M.↗