Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Fabrication and electrical properties of single wall carbon nanotube channel and graphene electrode based transistors arrays

A transistor structure composed of an individual single-walled carbon nanotube (SWNT) channel with a graphene electrode was demonstrated. The integrated arrays of transistor devices were prepared by transferring patterned graphene electrode patterns on top of the aligned SWNT along one direction. Both single and multi layer graphene were used for the electrode materials; typical p-type transistor and Schottky diode behavior were observed, respectively. Based on our fabrication method and device performances, several issues are suggested and discussed to improve the device reliability and finally to realize all carbon based future electronic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of surface plasmon resonances of silver nanoparticles on optical and electrical properties of textured silicon solar cell

Here, we report average reflectance reduction of ∼8% in wavelength range of 300–1100 nm after coupling surface plasmon resonances (SPRs) of silver nanoparticles (NPs) to textured silicon (T-Si) surface. The enhancement of photocurrent from T-Si solar cell in off-resonant SPR region observed due to better radiative efficiency of NPs leading to outflow of scattered far-field into silicon maximized power generating electrons. Improvement in series resistance, fill factor, and open-circuit voltage (insensitive NPs size and morphology) are also observed with NPs along with photocurrent enhancement (sensitive to NPs sizes), which resulted cell efficiency enhancement from 4.49% to 6.42% for large area of 12.24 cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties and electronic structure of Si-implanted hexagonal boron nitride films

Si ion implantation with a set of ion energies and ion doses was carried out to dope hexagonal boron nitride (hBN) thin films synthesized by radio-frequency magnetron sputtering. Hall effect measurements revealed n-type conduction with a low resistivity of 0.5 Ω cm at room temperature, corresponding to an electron concentration of 2.0 × 10{sup 19} cm{sup −3} and a mobility of 0.6 cm{sup 2}/V s. Temperature-dependent resistivity measurements in a wide temperature range from 50 to 800 K demonstrated two shallow donor levels in the hBN band gap induced by Si doping, which was in consistence with the theoretical calculation by density function theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Abnormal humidity-dependent electrical properties of amorphous carbon/silicon heterojunctions

Amorphous carbon (a-C) film/n-Si heterojunctions have been fabricated by pulse laser deposition, and their current-voltage characteristics have been investigated. The results show that the atmosphere relative humidity (RH) has a significant effect on the reverse bias I-V characteristics of the heterojunctions. For the low bias voltages, the resistance of the a-C/Si heterojunction decreases with the increase of the RH. However, when the applied voltage is greater than a threshold, the resistance of the a-C/Si heterojunctions increases with the increase of the RH. This humidity-dependent phenomenon is attributed to the charge transfer from the absorbed H{sub 2}O molecular to a-C film.

36 MATERIALS SCIENCE↗

A study on dependence of the structural, optical and electrical properties of cadmium lead sulphide thin films on Cd/Pb ratio

Cadmium Lead Sulphide thin films with systematic variation in Cd/Pb ratio are prepared at 333K by CBD, adjusting the reagent-molarity, deposition time and pH. XRD exhibits crystalline-amorphous transition as Cd% exceeds Pb%. AFM shows agglomeration of crystallites of size ∼50±5 nm. EDAX assess the composition whereas XPS ascertains the ternary formation, with binding energies of Pb4f{sub 7/2} and 4f{sub 5/2}, Cd3d{sub 5/2} and 3d{sub 3/2} and S2p at 137.03, 141.606, 404.667, 412.133 and 160.218 eV respectively. The optical absorption spectra reveal the variance in the direct allowed band gaps, from 1.57eV to 2.42 eV as Cd/Pb ratio increases from 0.2 to 2.7, suggesting possibility of band gap engineering in the n-type films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth, microstructure, optical and electrical properties of sprayed CuInSe{sub 2} polycrystalline films

Polycrystalline thin films of CuInSe{sub 2} have been prepared by chemical spray pyrolysis technique as a function of Cu/In ratio. Incremental growth of the various ratios followed at different substrate temperatures ranging from 548 to 623 K. Characterizations by means of compositional analysis, X-ray diffraction and spectrophotometry measurements have been carried out. Voigt profile method has been used to determine the microstructure parameter (crystallite/domain size and macrostrain). The effect of Cu/In ratio as well as substrate temperature on the optical features (absorption coefficient and band gap) of these films has been investigated. The films of different Cu/In ratios (0.9-1.1) displayed a band gap from 0.92 to 1.025 eV for direct transition. The dark resistivity measurements at room temperature of Cu-rich samples show about five orders of magnitude higher than that of In-rich samples.

36 MATERIALS SCIENCE↗

Electrical properties and interfacial issues of high-k/Si MIS capacitors characterized by the thickness of Al{sub 2}O{sub 3} interlayer

A thin Al{sub 2}O{sub 3} interlayer deposited between La{sub 2}O{sub 3} layer and Si substrate was used to scavenge the interfacial layer (IL) by blocking the out-diffusion of substrate Si. Some advantages and disadvantages of this method were discussed in detail. Evident IL reduction corroborated by the transmission electron microscopy results suggested the feasibility of this method in IL scavenging. Significant improvements in oxygen vacancy and leakage current characteristics were achieved as the thickness of Al{sub 2}O{sub 3} interlayer increase. Meanwhile, some disadvantages such as the degradations in interface trap and oxide trapped charge characteristics were also observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and electrical properties of high-quality 0.41 μm-thick InSb films grown on GaAs (1 0 0) substrate with In{sub x}Al{sub 1−x}Sb continuously graded buffer

High-quality InSb was grown on a GaAs (1 0 0) substrate with an InAlSb continuously graded buffer (CGB). The temperatures of In, Al K-cells and substrate were modified during the growth of InAlSb CGB. The cross-section TEM image reveals that the defects due to lattice-mismatch disappear near lateral structures in CGB. The measured electron mobility of 0.41 μm-thick InSb was 46,300 cm{sup 2}/Vs at 300 K. These data surpass the electron mobility of state-of-the-art InSb grown by other methods with similar thickness of InSb.

36 MATERIALS SCIENCE↗

Effect of Mo Doping at the B Site on Structural and Electrical Properties of Multiferroic BiFeO{sub 3}

The Mo-doped BiFe{sub 1−x}Mo{sub x}O{sub 3}, where x = 0 and 0.6, samples were synthesised by the solid-state reaction method. Admirable ferroelectric and piezoelectric properties are expected on substituting solid solutions of bulk BFO with other oxide perovskite compounds. It offers an alternative and is an environment-friendly candidate for lead-free ferroelectric and piezoelectric devices. The prepared samples were investigated by XRD, Fourier transform infrared spectroscopy (FTIR), current density (JE) measurement, PE loop tracer and field emission scanning electron microscopy to examine their crystal structure, bonding nature, current density, ferroelectric hysteresis loop and surface morphology. The Mo-doped BFO shows a change in structure, increased grain size, reduction in current density and enhancement in the PE loop on doping Mo at the Fe site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, magnetic and electrical properties of the hexagonal ferrites MFeO{sub 3} (M=Y, Yb, In)

The hexagonal ferrites MFeO{sub 3} (M=Y, Yb, In) have been studied using a combination of neutron and X-ray powder diffraction, magnetic susceptibility, dielectric measurements and {sup 57}Fe Moessbauer spectroscopy. This study confirms the previously reported crystal structure of InFeO{sub 3} (YAlO{sub 3} structure type, space group P6{sub 3}/mmc), but YFeO{sub 3} and YbFeO{sub 3} both show a lowering of symmetry to at most P6{sub 3}cm (ferrielectric YMnO{sub 3} structure type). However, Moessbauer spectroscopy shows at least two distinct Fe sites for both YFeO{sub 3} and YbFeO{sub 3} and we suggest that the best model to rationalise this involves phase separation into more than one similar hexagonal YMnO{sub 3}-like phase. Rietveld analysis of the neutron diffraction data was carried out using two hexagonal phases as a simplest case scenario. In both YFeO{sub 3} and YbFeO{sub 3}, distinct dielectric anomalies are observed near 130 K and 150 K, respectively. These are tentatively correlated with weak anomalies in magnetic susceptibility and lattice parameters, for YFeO{sub 3} and YbFeO{sub 3}, respectively, which may suggest a weak magnetoelectric effect. Comparison of neutron and X-ray powder diffraction shows evidence of long-range magnetic order in both YFeO{sub 3} and YbFeO{sub 3} at low temperatures. Due to poor sample crystallinity, the compositional and structural effects underlying the phase separation and possible magnetoelectric phenomena cannot be ascertained. - Graphical abstract: Hexagonal MFeO{sub 3} (M=Y, Yb) exhibit phase separation into two YMnO{sub 3}-like phases. Variable temperature crystallographic, electrical and magnetic studies suggest weak correlations between electrical and magnetic responses and long-range magnetic order at low temperature. Highlights: Black-Right-Pointing-Pointer Multi-technique study of multiferroic hexagonal MFeO{sub 3}. Black-Right-Pointing-Pointer Phase separation into two similar hexagonal phases. Black-Right-Pointing-Pointer Weak coupling of electrical and magnetic responses. Black-Right-Pointing-Pointer Long-range magnetic order at low T.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical properties of NiAs-type MnTe films with preferred crystallographic plane of (110)

NiAs-type manganese telluride (MnTe) films with preferred crystallographic plane of (110) were prepared on Si/SiO{sub 2} substrates by pulsed laser deposition. X-ray diffraction (XRD) of the films was studied at different temperatures. The XRD peak of MnTe (110) films shifts to higher angle with decreasing temperature, showing the decrease of the lattice parameter. Resistivity of the films was studied in the temperature range of 2–350 K. The bump between 150 and 250 K was observed in the films, which may be related to the special s-d and p-d overlaps induced by the compressed lattice. The magnon drag effect near its Néel temperature T{sub N} and enlarged magnetic-elastic coupling below 100 K were observed and analyzed in details.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Virtual bound states elements and their effects on magnetic and electrical properties of Fe-Ni based metal amorphous nanocomposites

Metal amorphous nanocomposite alloys, with compositions (Fe 70 Ni 30 ) 80-x Nb 4 Si 2 B 14 TE x (0 ≤ x ≤ 5), where TE is a transition element, and (Fe 70 Ni 30 ) 80-y Nb 4+y Si 2 B 14 (0.5 ≤ y ≤ 2) were synthesized. Samples were annealed at 440 °C and strain-annealed at 440 °C and 300 MPa. Resistivity was found to increase with small substitutions of TE elements. Increasing V resulted in reduced B s from 1.2 T to 0.5 T. Further Mo additions lowered B s to 0.6 T, and consistently reduced the permeability. For Cr and Nb, resistivity increased, and strain-annealed permeability was lower than the annealed permeability. Finally, toroidal core losses on (Fe 70 Ni 30 ) 79.5 Nb 4 Si 2 B 14 V 1 yielded W1.0/400 = 2.1 W/kg, and W1.0/1 k = 6.0 W/kg.

36 MATERIALS SCIENCE↗

Geometry- and size-dependence of electrical properties of metal contacts on semiconducting nanowires.

We report on a theoretical study of the geometry-and size-dependent effects of metal-semiconductor contacts to understand the origins of significant contact effects on nanowire (NW) devices. The difference in metal-semiconductor barrier width and height for a planar and NW device is calculated based on the differences in depletion-layer width and image-force barrier-lowering effects. We calculate the ratio of the specific contact resistance of a NW contact to that of a planar contact assuming the two systems have been made of the same material set. Using a modified cylindrical transmission line model, we compare the effects of contacts in the two systems and discuss the reasons for larger contact effects in NW devices. The study suggests that the formation of a higher doping concentration in the contact regions is essential for better NW transistors.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Electrical properties of In{sub 2}Se{sub 3} single crystals and photosensitivity of Al/In{sub 2}Se{sub 3} Schottky barriers

In{sub 2}Se{sub 3} single crystals {approx}40 mm long and 14 mm in diameter were grown by the Bridgman method. The composition of grown single crystals and their crystal structure were determined. The conductivity ({sigma}) and Hall constant (R) of grown single crystals were measured and the first Schottky barriers Al/n-In{sub 2}Se{sub 3} were fabricated. Rectification and photovoltaic effect were detected in the new structures. Based on the study of the photosensitivity spectra of Al/n-In{sub 2}Se{sub 3} structures, the nature of the interband transitions and band gap of In{sub 2}Se{sub 3} crystals were determined. It was concluded that the new structures can be applied to develop broadband photoconverters of optical radiation.

36 MATERIALS SCIENCE↗

Deep traps and photo-electric properties of p-Si/MgO/n-Zn{sub 1−x}Mg{sub x}O heterojunction

In the paper, the photoluminescence (PL) measurements, current–voltage–temperature (I-V-T) measurements, space charge techniques (C-V and deep level transient spectroscopy (DLTS)), and photocurrent spectral characteristics have been applied to investigate defects in p-Si/MgO/ n-Zn{sub 1−x}Mg{sub x}O heterojunction (HJ). The HJ structure was grown on p-type Si (111) substrate with resistivity equal to 0.1 Ω cm by the plasma-assisted molecular beam epitaxy technique. A radio-frequency cell was used for the generation of oxygen plasma. PL spectrum let us determine the Mg content ∼10%. Besides the excitonic Zn{sub 0.9}Mg{sub 0.1}O line, the PL spectrum also contains green and yellow emission bands indicating the presence of defect states in the investigated structures. I-V measurements reveal the rectifying properties of the HJ and the current thermally activated with a trap with the activation energy equal to 0.42 eV. DLTS studies yield the majority trap of the activation energy 0.42 eV, confirming the result obtained from the I-V measurements. It was found that the defects related to this trap have a point like behaviour. A spectral characteristic of the photocurrent shows that the p-Si/MgO/n-Zn{sub 1−x}Mg{sub x}O HJ may be applied as a photodiode operating within the wavelength range of 300 nm-1100 nm. The dark current transport and photocurrent spectrum were explained using the Anderson model of a HJ.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The influence of {gamma}-ray radiation on electrical properties of CuGaSe{sub 2}

The effect of {gamma}-ray radiation on the conductivity of low-resistivity (10{sup 2}2-10{sup 4} {Omega} cm) and high-resistivity (10{sup 5}-10{sup 7} {Omega} cm) CuGaSe{sub 2} single crystals has been studied in the temperature range 77-330 K. It is found that the resistivity of low-resistivity samples increases as the dose of {gamma}-ray radiation is increased, while the resistivity of high-resistivity samples is practically independent of the radiation dose. It is assumed that a decrease in the conductivity of the low-resistivity samples occurs owing to scattering of free charge carriers at defects (charged centers) formed as a result of irradiation with {gamma}-ray photons. It is found that the dose of the {gamma}-ray irradiation does not affect the temperature dependence of resistivity in the low- and high-resistivity samples in the temperature range 77-300 K.

36 MATERIALS SCIENCE↗

Effect of the Crystal Structure on the Electrical Properties of Thin-Film PZT Structures

A new method of two-stage crystallization of lead zirconate–titanate (PZT) films using a seed sublayer with a low excess lead content has been proposed and realized. A seed layer with a strong texture of perovskite Pe(111) grains is formed from a solution with a lead excess of 0–5 wt %; the fast growth of the grains is provided by the deposition of the main film from a solution with high lead content. As a result, a strong Pe(111) texture with complete suppression of the Pe(100) orientation forms. An analysis of current–voltage dependences of the transient currents and the distributions of the local conductivity measured by the contact AFM method reveals two various mechanisms of current percolation that are determined by traps in the bulk and at the perovskite grain interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial characterization and electrical properties of Ni–GaSb contacts

The microstructural characterization of Ni–GaSb junctions in samples annealed at 300 °C, 350 °C, and 400 °C in a N{sub 2} atmosphere was elucidated using transmission electron microscopy in conjunction with energy-dispersive spectrometry, nanobeam electron diffraction, and grazing-incident X-ray diffraction. Only the NiSb(Ga) phase is formed at the interface of Ni/GaSb when the annealing temperature is below 350 °C. However, three phases—NiSb, Ni{sub 2}Ga{sub 3}, and NiSb(Ga)—are formed simultaneously at the interface between Ni/GaSb when the annealing temperature is increased to 400 °C, which causes a significant increase in the sheet resistance of the Ni–GaSb alloy. These results indicate that the annealing temperature of the Ni/GaSb structure should be maintained below 350 °C for the formation of low-resistance metal Ni/GaSb contacts in GaSb-based p-type metal-oxide-semiconductor field-effect transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗