SEARCH · Search NASA

Results for “EVAPORATION MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Performance of a Hybrid HVAC-Integrated Thermal Storage Device

Thermal equipment in buildings is a primary contributor to peak loads on the electrical grid. Thermal energy storage is a cost-effective strategy to decouple electric use from thermal loads, thus reducing grid peak costs for building owners. One method for storing thermal energy in a building is to integrate a phase change material (PCM) directly into the heating, ventilation, and air conditioning system. These systems often require additional glycol loops, pumps, valves, and heat exchangers to couple the storage to the cooling system and building space, which increases the complexity and cost. This work will discuss an alternate approach where the storage is added directly into the heat pump evaporator. A detailed two-dimensional finite difference heat transfer model of a PCM-refrigerant-glycol heat exchanger was developed to simulate the performance of this component. The fluid stream was discretized along the flow direction to capture changes in the fluid properties and local heat transfer rates, and the phase change material was discretized in both the x and y directions to capture the movement of the melt front. The model was used to understand the impact of different material and geometric properties on the charge and discharge characteristics of the device. Finally, a Ragone framework analogous to that used for electrochemical batteries was used to maximize the energy density and round-trip efficiency of the device while supplying loads appropriate for space cooling in buildings.

buildings↗

DOE OSTI2017

Melter Downtime Impacts on DFLAW Glass Production and Process Efficiency - 17117

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) pilot studies found that semi-volatile elements started to leave the molten glass pool and enter the offgas stream when the melter became idle. The rate at which the semi-volatile elements leave the molten glass pool follows a typical half-life decay curve. The WTP Direct Feed Low-Activity Waste (DFLAW) program is using existing LAW offgas treatment systems to capture semi-volatile elements leaving the melters. A new building, Effluent Management Facility (EMF), will be built to process effluents generated by the offgas treatment equipment. The effluents are concentrated by evaporation and are recycled to the melter feed streams. Computer modeling studies show that increased amounts of semi-volatile elements in the recycles due to melter downtime adversely impact the DFLAW operations. The extent to which glass productions and process efficiencies are hampered depends upon the frequency, duration, and pattern of the downtime events. Various scenarios were investigated using randomly generated and operator-anticipated downtime schedules. This paper discusses 1) derivation of the volatility half-life curves, 2) downtime schedules, 3) increased amount of semi-volatile elements in recycled material as a result of melter shut down, 4) impacts to glass production and process efficiency, and 5) comparison of scenario results. This study concludes that plant operators can mitigate much of the negative effects of semi-volatile element recycles by managing melter downtime and idle time when possible. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Flow Assisted Evaporative Cooling for Electric Motor

This paper examines a novel concept of flow assisted latent heat driven two-phase evaporative cooling (EC) confined in-between slot liner and active-winding of electric motor. Wicking micro-structure enhanced PDMS liner axially sucks coolant in the form of thin film between the PDMS liner and active-winding and eventually enables thin film evaporation on the outer surface of the active-winding. Therefore, EC based thermal management eliminates contact resistance between the winding and slot-liner and, enhances the heat extraction from the winding without compromising the electro-magnetic performance. Two-way coupled electro-magnetic (EM) – computational fluid dynamics/heat transfer (CFD/HT) and EM - lumped parameter thermal network (LPTN) models have been developed to assess the electro-thermal performance of the EC under steady and transient conditions. Taking a case study of a 125 kW jacket cooled BMW i3 motor and dielectric coolant FC-84, EC is shown to be capable of handling a maximum steady state rms current density of 26 A/mm2 at a evaporative heat transfer coefficient of 5,000 W/m2.K, which is about 78.7% higher compared to the traditional jacket cooling (JC). In case of EC, a maximum steady state and transient rms current density of 30 A/mm2 (106.2% higher compared to the JC), and 40.8 A/mm2 have been realized by using high thermal conductivity epoxy (1.9 W/m.K) impregnation material. Thermal performance of the EC is also assessed and compared with JC over a dynamic drive cycle. Lastly, a motorette testing has been performed to demonstrate the applicability of the proposed EC method and to validate the developed modeling framework.

42 ENGINEERING↗

DOE OSTI2014

Tear Dynamics in Healthy and Dry Eyes

Purpose : Dry-eye disease, an increasingly prevalent ocular-surface disorder, significantly alters tear physiology. Knowing the essential physics of tear dynamics in healthy and dry eyes benefits both diagnosis and treatment of dry eye. We introduce a physiological-based model to describe tear dynamics during blinking. Materials and methods : Tears are compartmentalized over the ocular surface; the blink cycle is divided into three repeating phases. Conservation laws quantify the tear volume and tear osmolarity of each compartment during each blink phase. Lacrimal-supply and tear-evaporation rates are varied to reveal the dependence of tear dynamics on dry-eye conditions, specifically tear osmolarity, tear volume, tear-turnover rate (TTR), and osmotic water flow. Results : Predicted periodic-steady tear-meniscus osmolarity is 309 and 321 mOsM in normal and dry eyes, respectively. Tear osmolarity, volume, and TTR all match available clinical measurements. Osmotic water flow through the cornea and conjunctiva contribute 10 and 50% to the total tear supply in healthy and dry-eye conditions, respectively. TTR in aqueous-deficient dry eye (ADDE) is only half that in evaporative dry eye (EDE). Conclusions : The compartmental periodic-steady tear-dynamics model accurately predicts tear behavior in normal and dry eyes. Inclusion of osmotic water flow is crucial to match measured tear osmolarity. Tear-dynamics predictions corroborate the use of TTR as a clinical discriminator between ADDE and EDE. The proposed model is readily extended to predict the dynamics of aqueous solutes such as drugs or fluorescent tags.

Blink cycle↗

DOE OSTI2018

On the Utility (or Futility) of Using Stable Water Isotopes to Constrain the Bulk Properties of Tropical Convection

Atmospheric water-vapor isotopes have been proposed as a potentially powerful constraint on convection, which plays a critical role in Earth's present and future climate. It is shown here, however, that the mean tropical profile of HDO in the free troposphere does not usefully constrain the mean convective entrainment rate or precipitation efficiency. This is demonstrated using a single-column analytical model of atmospheric water isotopes. The model has three parameters: the entrainment rate, the precipitation efficiency, and the distance that evaporating condensates fall. At a given relative humidity, the possible range of HDO is small: its range is comparable to both the measurement uncertainty in the mean tropical profile and the structural uncertainty of a single-column model. Therefore, the mean tropical HDO profile is unlikely to add information about convective processes in a bulk-plume framework that cannot already be learned from relative humidity alone.

58 GEOSCIENCES↗

DOE OSTI2017

On the transcritical mixing of fuels at diesel engine conditions

Whilst the physics of both classical evaporation and supercritical fluid mixing are reasonably well characterized and understood in isolation, little is known about the transition from one to the other in the context of liquid fuel systems. The lack of experimental data for microscopic droplets at realistic operating conditions impedes the development of phenomenological and numerical models. To address this issue we performed systematic measurements using high-speed long-distance microscopy, for three single-component fuels (n-heptane, n-dodecane, n-hexadecane), into gas at elevated temperatures (700–1200 K) and pressures (2–11 MPa). We describe these high-speed visualizations and the time evolution of the transition from liquid droplet to fuel vapour at the microscopic level. The measurements show that the classical atomization and vaporisation processes do shift to one where surface tension forces diminish with increasing pressure and temperature, but the transition to diffusive mixing does not occur instantaneously when the fuel enters the chamber. Rather, subcritical liquid structures exhibit surface tension in the near-nozzle region and then, after time surrounded by the hot ambient gas and fuel vapour, undergo a transition to a dense miscible fluid. Although there was clear evidence of surface tension and primary atomization for n-dodecane and n-hexadecane for a period of time at all the above conditions, n-heptane appeared to produce a supercritical fluid from the nozzle outlet when injected at the most elevated conditions (1200 K, 10 MPa). This demonstrates that the time taken by a droplet to transition to diffusive mixing depends on the pressure and temperature of the gas surrounding the droplet as well as the fuel properties. We summarise our observations into a phenomenological model which describes the morphological evolution and transition of microscopic droplets from classical evaporation through a transitional mixing regime and towards diffusive mixing, as a function of operating conditions. We provide criteria for these regime transitions as reduced pressure–temperature correlations, revealing the conditions where transcritical mixing is important to diesel fuel spray mixing.

02 PETROLEUM↗

DOE OSTI2024

Simulation of metal nanoparticles growth in methane atmosphere of arc discharge: comparison to experiment

A direct current arc discharge in a methane atmosphere is a scalable and sustainable method to produce metal-carbon core–shell nanoparticles and single-walled carbon nanotubes, where a metal catalyst can be continuously supplied through evaporation of an anode made from the catalyst material. The size of catalyst particles is of critical importance as it can affect the synthesis yield and properties of nanotubes and core–shell nanoparticles. This study presents a numerical model describing the formation and growth of metal particles for the conditions representative of the arc discharge with an evaporating iron anode at near-atmospheric pressure of a methane-rich atmosphere. The model incorporates carbon adsorption to the metal surface and explains the limiting effect of carbon coverage on the size of metal nanoparticles. The predicted particle sizes are compared with experimental observations. The model also predicts higher concentrations of metal particles with the increasing partial pressure of methane.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

A two-phase three-field modeling framework for heat pipe application in nuclear reactors

Heat pipes and two-phase thermosyphons are highly efficient heat transfer devices utilizing continuous evaporation and condensation of working fluid for two-phase heat transport in closed systems. Because of the nearly isothermal and fully passive phase-change heat transfer mechanism, heat pipes and thermosyphons have found many applications in nuclear engineering, space technologies, and other energy systems. High-temperature heat pipes are used in nuclear microreactors to remove fission power from the primary system and are coupled with power conversion systems or process heat applications. Modeling of the two-phase flow phenomena inside a heat pipe is essential to its design and safety analysis. In this study, a comprehensive one-dimensional two-phase three-field flow model has been developed for the analysis of heat pipes in normal operation conditions and transients. The conservation or field equations of mass, momentum, and energy were developed for the liquid film, vapor, and droplet. In addition, constitutive models or correlations were reviewed thoroughly and provided for the closure of the three-field equations. Specific constitutive equations regarding interfacial mass and heat transfer at two interfaces, namely film-gas interface and gas-droplet interface, were reviewed for droplet entrainment and deposition rates as well as film and droplet evaporation rates. Furthermore, mechanistic correlations of annular flow film thickness were recommended for the modeling of the thermosyphons without a wick as a critical constitutive correlation. Furthermore, experimental data needs from new experiments using a prototype working fluid or surrogate fluids for the model validation of high-temperature heat pipes in microreactors were recommended for future research.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

M-Star ® Modeling of SME Mixing with Three Impeller Blades

Before a sample of the Slurry Mix Evaporator (SME) can be taken, the SME product sampling procedure requires that the agitator power be stable between 20 and 30 kW for at least one hour. The SME transfer to Melter Feed Tank (MFT) procedure also requires the SME agitator power be stabilized between 20 and 30 kW prior to transfer. These requirements are specified to ensure samples are homogeneous, as discussed in the Waste Form Qualification Report. During SME Batch 804, the agitator power dropped to 19 kW and struggled to achieve and maintain 20 kW. It was later discovered that the cause of the power drop was due to one of the bottom blades of the agitator breaking off. Both the sample and the transfer occurred without the power stabilizing between 20 and 30 kW. Therefore, the quality of SME Batch 804 is indeterminate, and homogeneity was questionable. To evaluate mixing in the SME with a broken agitator containing only three blades (90 degrees apart with space for a missing blade) on the bottom impeller, the Savannah River National Laboratory (SRNL) was requested to perform computer simulations of impeller mixing in the SME using M-Star ® software. The simulations will be used to determine if SME Batch 804 was well mixed and satisfies homogeneity requirements.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2018

Capillary evaporation of the ionic liquid [EMIM][BF 4 ] in nanoscale solvophobic confinement

We report that solvent density fluctuations play a crucial role in liquid-vapor transitions in solvophobic confinement and can also be important for understanding solvation of polar and apolar solutes. In the case of ionic liquids (ILs), density fluctuations can be used to understand important processes in the context of nanoscale aggregation and colloidal self-assemblies. In this article, we explore the nature of density fluctuations associated with capillary evaporation of the IL 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) in the confined region of model solvophobic nanoscale sheets by using molecular dynamics simulations combined with non-Boltzmann sampling techniques. We demonstrate that density fluctuations of the confined IL play an important role in capillary evaporation, suggesting analogies to dewetting transitions involving water. Lastly, significant changes in the interfacial structure of the IL are also detailed and suggested to underlie a non-classical (non-parabolic) dependence of the free energy barrier to evaporation on the degree of confinement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2013

CHROMOSPHERIC EVAPORATION IN SOLAR FLARE LOOP STRANDS OBSERVED WITH THE EXTREME-ULTRAVIOLET IMAGING SPECTROMETER ON BOARD HINODE

The entire profile of the Fe XXIII line at 263.8 A, formed at temperature Almost-Equal-To 14 MK, was blueshifted by an upward velocity -122 {+-} 33 km s{sup -1} when it was first detected by the Extreme-ultraviolet Imaging Spectrometer operating in rapid cadence (11.18 s) stare mode during a C1 solar flare. The entire profile became even more blueshifted over the next two exposures, when the upward velocity reached its maximum of -208 {+-} 14 km s{sup -1} before decreasing to zero over the next 12 exposures. After that, a weak, secondary blueshifted component appeared for five exposures, reached a maximum upward velocity of -206 {+-} 33 km s{sup -1}, and disappeared after the maximum line intensity (stationary plus blueshifted) was achieved. Velocities were measured relative to the intense stationary profile observed near the flare's peak and early during its decline. The initial episode during which the entire profile was blueshifted lasted about 156 s, while the following episode during which a secondary blueshifted component was detected lasted about 56 s. The first episode likely corresponds to chromospheric evaporation in a single loop strand, while the second corresponds to evaporation in an additional strand, as described in multi-strand flare loop models proposed by Hori et al. and Warren and Doschek. Line emission from progressively cooler ions (Fe XVII, XVI, and XIV) brightened at successively later times, consistent with cooling of flare-heated plasma.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Earth-system-model evaluation of cloud and precipitation occurrence for supercooled and warm clouds over the Southern Ocean's Macquarie Island

Abstract. Over the remote Southern Ocean (SO), cloud feedbacks contribute substantially to Earth system model (ESM) radiative biases. The evolution of low Southern Ocean clouds (cloud-top heights < ∼ 3 km) is strongly modulated by precipitation and/or evaporation, which act as the primary sink of cloud condensate. Constraining precipitation processes in ESMs requires robust observations suitable for process-level evaluations. A year-long subset (April 2016–March 2017) of ground-based profiling instrumentation deployed during the Macquarie Island Cloud and Radiation Experiment (MICRE) field campaign (54.5∘ S, 158.9∘ E) combines a 95 GHz (W-band) Doppler cloud radar, two lidar ceilometers, and balloon-borne soundings to quantify the occurrence frequency of precipitation from the liquid-phase cloud base. Liquid-based clouds at Macquarie Island precipitate ∼ 70 % of the time, with deeper and colder clouds precipitating more frequently and at a higher intensity compared to thinner and warmer clouds. Supercooled cloud layers precipitate more readily than layers with cloud-top temperatures > 0 ∘C, regardless of the geometric thickness of the layer, and also evaporate more frequently. We further demonstrate an approach to employ these observational constraints for evaluation of a 9-year GISS-ModelE3 ESM simulation. Model output is processed through the Earth Model Column Collaboratory (EMC2) radar and lidar instrument simulator with the same instrument specifications as those deployed during MICRE, therefore accounting for instrument sensitivities and ensuring a coherent comparison. Relative to MICRE observations, the ESM produces a smaller cloud occurrence frequency, smaller precipitation occurrence frequency, and greater sub-cloud evaporation. The lower precipitation occurrence frequency by the ESM relative to MICRE contrasts with numerous studies that suggest a ubiquitous bias by ESMs to precipitate too frequently over the SO when compared with satellite-based observations, likely owing to sensitivity limitations of spaceborne instrumentation and different sampling methodologies for ground- versus space-based observations. Despite these deficiencies, the ESM reproduces the observed tendency for deeper and colder clouds to precipitate more frequently and at a higher intensity. The ESM also reproduces specific cloud regimes, including near-surface clouds that account for ∼ 25 % of liquid-based clouds during MICRE and optically thin, non-precipitating clouds that account for ∼ 27 % of clouds with bases higher than 250 m. We suggest that the demonstrated framework, which merges observations with appropriately constrained model output, is a valuable approach to evaluate processes responsible for cloud radiative feedbacks in ESMs.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Large-eddy simulation of non-vaporizing sprays using the spectral-element method

Predictive simulations of high-pressure sprays require accurate representation of the turbulent gaseous flow field generated by liquid jet. Typically, the accuracy that can be obtained with low-order numerical methods (e.g. finite volume, finite element) is limited by stability issues in fine grids and the order of convergence of the method. In this work, we resolve the turbulent flow field in an Eulerian manner using the high-order spectral element method, coupled with a Lagrangian parcels approach to model the atomizing liquid jet. Large eddy simulations of single-hole sprays under non-evaporative conditions were conducted and compared against experimental data from Margot et al. (2008) and Spray A data from the Engine Combustion Network. The sensitivity of liquid penetration and droplet sizes to different breakup model parameters was studied. The effect of different numerical parameters, such as polynomial order of the solution (grid resolution), on liquid penetration was also analyzed. The method achieved grid-independent results using p-refinement, achieving finer resolution (by a factor of x 1.7 - x 3.5) in the gas-phase solution than in state-of-the-art simulations using the finite-volume method. Here the results showed good agreement with experimental data, demonstrating the ability of the current method to accurately capture liquid penetration and the shape of the spray.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2018

Evaporation-induced monolayer compression improves droplet interface bilayer formation using unsaturated lipids

In this paper, we report on a new experimental methodology to enable reliable formation of droplet interface bilayer (DIB) model membranes with two types of unsaturated lipids that have proven difficult for creating stable DIBs. Through the implementation of a simple evaporation technique to condition the spontaneously assembled lipid monolayer around each droplet, we increased the success rates of DIB formation for two distinct unsaturated lipids, namely 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), from less than 10% to near 100%. Separately, using a pendant drop tensiometer, we learned that: (a) DOPC and POPC monolayers do not spontaneously assemble into their tightest possible configurations at an oil-water interface, and (b) reducing the surface area of a water droplet coated with a partially packed monolayer leads to a more tightly packed monolayer with an interfacial tension lower than that achieved by spontaneous assembly alone. We also estimated from Langmuir compression isotherms obtained for both lipids that the brief droplet evaporation procedure prior to DIB formation resulted in a 6%–16% reduction in area per lipid for DOPC and POPC, respectively. Lastly, the increased success rates of formation for DOPC and POPC DIBs enabled quantitative characterization of unsaturated lipid membrane properties including electrical resistance, rupture potential, and specific capacitance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2012

Development and Analysis of Desiccant Enhanced Evaporative Air Conditioner Prototype

This report documents the design of a desiccant enhanced evaporative air conditioner (DEVAP AC) prototype and the testing to prove its performance. Previous numerical modeling and building energy simulations indicate a DEVAP AC can save significant energy compared to a conventional vapor compression AC (Kozubal et al. 2011). The purposes of this research were to build DEVAP prototypes, test themto validate the numerical model, and identify potential commercialization barriers.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

The primordial black holes that disappeared: connections to dark matter and MHz-GHz gravitational Waves

In the post-LIGO era, there has been a lot of focus on primordial black holes (PBHs) heavier than ~10 15 g as potential dark matter (DM) candidates. We point out that the branch of the PBH family that disappeared — PBHs lighter than ~10 9 g that ostensibly Hawking evaporated away in the early Universe — also constitute an interesting frontier for DM physics. Hawking evaporation itself serves as a portal through which such PBHs can illuminate new physics, for example by emitting dark sector particles. Here, taking a simple DM scalar singlet model as a template, we compute the abundance and mass of PBHs that could have provided, by Hawking evaporation, the correct DM relic density. We consider two classes of such PBHs: those originating from curvature perturbations generated by inflation, and those originating from false vacuum collapse during a first-order phase transition. For PBHs of both origins we compute the gravitational wave (GW) signals emanating from their formation stage: from second-order effects in the case of curvature perturbations, and from sound waves in the case of phase transitions. The GW signals have peak frequencies in the MHz-GHz range typical of such light PBHs. We compute the strength of such GWs compatible with the observed DM relic density, and find that the GW signal morphology can in principle allow one to distinguish between the two PBH formation histories.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2018

Characteristics of Amorphous As{sub 2}S{sub 3} Semiconductor Films Obtained via Spin Coating

Centrifugation is used in fabricating, e.g., films with large areas and/or thicknesses of several micrometers. However, it has yet to be widely employed for chalcogenide compounds, due to their relatively weak solubility in most solvents. Determining the optimum conditions for preparing solutions of chalcogenide compounds and obtaining films via centrifugation is therefore of great interest. Specific features of amorphous arsenic sulfide (As{sub 2}S{sub 3}) films prepared via the centrifugation of solutions in n-butylamine have been studied. These films were characterized by means of X-ray diffraction analysis, IR spectroscopy, atomic-force microscopy and Raman spectroscopy. It was shown that amorphous As{sub 2}S{sub 3} films have a greater elasticity modulus than those of analogous composition produced via thermal evaporation in vacuum, or As{sub 2}S{sub 3} glass. A structural model based on arsenic sulfide clusters whose surfaces are bound by negatively and positively charged ions is used to explain the experimental results obtained in this work. DC measurements show that the amorphous films exhibit semiconductor-type conductivity. Their room temperature conductivity is ~10{sup −15} S/cm, which indicates good dielectric properties. The films are optically transparent starting from the yellow spectral range, making them promising functional materials for engineering applications in optics and photonics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2013

Energy Efficient Operation of Ammonia Refrigeration Systems

Ammonia refrigeration systems typically offer many energy efficiency opportunities because of their size and complexity. This paper develops a model for simulating single-stage ammonia refrigeration systems, describes common energy saving opportunities, and uses the model to quantify those opportunities. The simulation model uses data that are typically available during site visits to ammonia refrigeration plants and can be calibrated to actual consumption and performance data if available. Annual electricity consumption for a base-case ammonia refrigeration system is simulated. The model is then used to quantify energy savings for six specific energy efficiency opportunities; reduce refrigeration load, increase suction pressure, employ dual suction, decrease minimum head pressure set-point, increase evaporative condenser capacity, and reclaim heat. Methods and considerations for achieving each saving opportunity are discussed. The model captures synergistic effects that result when more than one component or parameter is changed. This methodology represents an effective method to model and quantify common energy saving opportunities in ammonia refrigeration systems. The results indicate the range of savings that might be expected from common energy efficiency opportunities.

Mohammed, Abdul Qayyum↗