Search NASA⌕ Search

SEARCH · Search NASA

Results for “Exploratory Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Topic modeling to discern irregular order patterns in unlabeled electronic health records

This paper presents an application of topic modeling on event sequences of Electronic Health Record (EHR) orders. Metaphorically, we approach clinical order event sequences of unlabeled data as if they are documents where words are the events that occurred in the history of an order. We demonstrate the approach leveraging Consult orders data. The details of the data preprocessing and the data structures are described along with the data sources. Latent Dirichlet Allocation (LDA) is leveraged to fit against the limited datasets prepared. Another open source tool – LDAvis is used for exploratory analysis of the LDA results. The preliminary results revealed some order patterns that are qualitatively evaluated as potential irregular transitions. The goal of this analysis is to provide unsupervised learning application to domain experts in the absence of labeled data where they can investigate captured patterns and identify irregular transitions of orders. Ultimately, such efforts will guide formalization of hazard detection algorithms that monitor EHR data to identify health information technology related hazards.

Ozmen, Ozgur↗

Behavioral consequences of radiation exposure to simulated space radiation in the C57BL/6 mouse: open field, rotorod, and acoustic startle

Two experiments were carried out to investigate the consequences of exposure to proton radiation, such as might occur for astronauts during space flight. C57BL/6 mice were exposed, either with or without 15-g/cm2 aluminum shielding, to 0-, 3-, or 4-Gy proton irradiation mimicking features of a solar particle event. Irradiation produced transient direct deficits in open-field exploratory behavior and acoustic startle habituation. Rotorod performance at 18 rpm was impaired by exposure to proton radiation and was impaired at 26 rpm, but only for mice irradiated with shielding and at the 4-Gy dose. Long-term (>2 weeks) indirect deficits in open-field activity appeared as a result of impaired experiential encoding immediately following exposure. A 2-week recovery prior to testing decreased most of the direct effects of exposure, with only rotorod performance at 26 rpm being impaired. These results suggest that the performance deficits may have been mediated by radiation damage to hippocampal, cerebellar, and possibly, forebrain dopaminergic function.

Non-NASA Center↗

Deep reaction network exploration at a heterogeneous catalytic interface

Characterizing the reaction energies and barriers of reaction networks is central to catalyst development. However, heterogeneous catalytic surfaces pose several unique challenges to automatic reaction network characterization, including large sizes and open-ended reactant sets, that make ad hoc network construction the current state-of-the-art. Here, we show how automated network exploration algorithms can be adapted to the constraints of heterogeneous systems using ethylene oligomerization on silica-supported single-site Ga 3+ as a model system. Using only graph-based rules for exploring the network and elementary constraints based on activation energy and size for identifying network terminations, a comprehensive reaction network is generated and validated against standard methods. The algorithm (re)discovers the Ga-alkyl-centered Cossee-Arlman mechanism that is hypothesized to drive major product formation while also predicting several new pathways for producing alkanes and coke precursors. These results demonstrate that automated reaction exploration algorithms are rapidly maturing towards general purpose capability for exploratory catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linking deposit morphology and clogging in subsurface remediation: Final Technical Report

Groundwater is a crucial resource for water supply, especially in arid and semiarid areas of the United States west of the 100th meridian. Accordingly, remediation of contaminated groundwater is an important application of science and technology, particularly for the U.S. Department of Energy (DOE), which oversees a number of groundwater remediation sites from Cold War era mining. Groundwater remediation is complex, because it depends on identifying, locating, and treating contaminants in the subsurface, where remediation reactions depend on interacting geological, hydrological, geochemical, and microbiological factors. Within this context, permeability is a fundamental concept, because it controls the rates and pathways of groundwater flow. Colloid science is intimately related to permeability, because when colloids are present (particles with equivalent diameters between 1 nanometer and 10 micrometers), changes in hydrological or geochemical conditions can trigger a detrimental reduction in permeability called clogging. Accordingly, clogging is a major concern in groundwater remediation. Several lines of evidence suggest that clogging by colloids depends on (1) colloid deposition, and (2) deposit morphology, that is, the structure of colloid deposits, which can be quantified as a fractal dimension. This report describes research, performed under a 2-year, exploratory grant from the DOE’s Subsurface Biogeochemical Research (SBR) program. This research employed a novel laboratory technique to simultaneously measure flow, colloid deposition, deposit morphology, and permeability in a flow cell, and also collected field samples from wells at the DOE’s Old Rifle remediation site. Field results indicate that suspended solids at the Old Rifle site have fractal structures. Laboratory results indicate that clogging is associated with colloid deposits with smaller fractal dimensions, in accordance with previous studies on initially clean granular media. Preliminary modeling has identified the deposit radius of gyration as a candidate variable to account for clogging as a function of (1) colloid accumulation and (2) deposit morphology.

54 ENVIRONMENTAL SCIENCES↗

Background Pressure Profiles for Sonic Boom Vehicle Testing in the NASA Glenn 8- by 6-Foot Supersonic Wind Tunnel

In an effort to identify test facilities that offer sonic boom measurement capabilities, an exploratory test program was initiated using wind tunnels at NASA research centers. The subject of this report is the sonic boom pressure rail data collected in the Glenn Research Center 8- by 6-Foot Supersonic Wind Tunnel. The purpose is to summarize the lessons learned based on the test activity, specifically relating to collecting sonic boom data which has a large amount of spatial pressure variation. The wind tunnel background pressure profiles are presented as well as data which demonstrated how both wind tunnel Mach number and model support-strut position affected the wind tunnel background pressure profile. Techniques were developed to mitigate these effects and are presented.

Castner, Raymond↗

Radiant Heating Tests on Meteoritic Material

A new effort geared toward modeling the physics of meteor entry and break-up is underway at NASA Ames Research Center. This is part of a broader interdisciplinary effort on providing physics-based risk assessment models for potentially hazardous objects. As part of the entry modeling task we are seeking to improve our understanding of, among other things, the ablation of meteoric material during high speed entry into earths atmosphere. Meteoroid entry differs greatly in some key respects from spacecraft entry modeling. First, the aerothermal environment at these high velocities (18 km/s) is dominated by radiation. Second, meteoroids less than, say, 50m in size, will likely lose a significant portion of their mass during the high-speed atmospheric entry process due to vaporization as well as melting and spallation. The mass of the object, in turn, directly affects the amount of energy deposited in the atmosphere, and therefore the amount of damage done. Thus it is important for us to understand and be able to model this process in greater detail in order to assess the hazard posed by these objects.In this presentation, we first give an overview of the simple ablation models that are typically used in meteor entry calculations. Additionally, we will present a new model which utilizes a similar approach to what is typically done for spacecraft TPS response modeling. This uses an equilibrium assumption near the surface to compute the ablation rate, as is done in heritage material response codes. Next we describe the radiant heating experiment which uses a high-powered laser to emulate the radiation dominated heating environment experienced by meteoroids during atmospheric entry. The facility the Laser Hardened Material Evaluation Laboratory (LHMEL) permits us to expose samples of meteoritic material to heating rates in excess of 100kW/sq.cm. An overview of the experimental set-up and test plan for the initial exploratory campaign at this facility will be given. Then we present both qualitative and quantitative results from this initial test series. Comparisons between predicted and measured ablation rates suggest that there may be significant blockage of the incident beam by the ablation plume. Furthermore, melt is shown to be a significant ablation mechanics, even at high heating rates (16 kW/sq.cm). Finally, comparisons between the phenomenology of the ablation of terrestrial rocks namely, basalt -- to that of meteorites show very different behavior. This is shown to likely be due in part to the effect of composition on the melt viscosity.

Stern, Eric↗

Monitoring of dielectric permittivity in accelerated alkali-silica reaction concrete with microwave backscattering

Deterioration of concrete due to the alkali–silica reaction (ASR) involves a reaction between alkaline ions in the cement pore solution and non-crystalline silica found in many aggregates. The product of reaction is a porous hydrophilic ASR gel, which causes expansion and cracking of concrete structure. Currently, there is no reliable method for non-destructive evaluation of ASR. We have investigated the feasibility of using relative dielectric permittivity obtained from X-band microwave backscattering of concrete. Advantages of this method of concrete evaluation are that measurements are non-contact and one-sided, and the approach is scalable to arbitrary-size concrete structures. The exploratory study was performed using an unrestrained set of accelerated ASR concrete prism specimens developed according to the ASTM1293 standard. One set of specimens contained no entrained air, while another set was contained entrained air. The specimens were removed from the environmental chamber at different times during a year-long study to create a set of different ASR maturity specimens. Strain measurements were performed on all specimens. Strain data both air entrained and non-air entrained sets were shown to be in close agreement with Larive model of isothermal unrestrained ASR expansion with similar fitting parameters. Furthermore, relative dielectric permittivity of concrete specimens was correlated with strain data. Both sets show correlation between dielectric permittivity and strain, with stronger linear correlation observed for the air-entrained specimens. Development of such correlation would enable estimating expansion of actual concrete structures from microwave backscattering measurements, which could be used for risk stratification to guide and minimize coring.

36 MATERIALS SCIENCE↗

Opportunities in Machine Learning for Particle Accelerators

Machine learning (ML) is a subfield of artificial intelligence. The term applies broadly to a collection of computational algorithms and techniques that train systems from raw data rather than a priori models. ML techniques are now technologically mature enough to be applied to particle accelerators, and we expect that ML will become an increasingly valuable tool to meet new demands for beam energy, brightness, and stability. The intent of this white paper is to provide a high-level introduction to problems in accelerator science and operation where incorporating ML-based approaches may provide significant benefit. We review ML techniques currently being investigated at particle accelerator facilities, and we place specific emphasis on active research efforts and promising exploratory results. We also identify new applications and discuss their feasibility, along with the required data and infrastructure strategies. We conclude with a set of guidelines and recommendations for laboratory managers and administrators, emphasizing the logistical and technological requirements for successfully adopting this technology. This white paper also serves as a summary of the discussion from a recent workshop held at SLAC on ML for particle accelerators.

43 PARTICLE ACCELERATORS↗

Preliminary Investigation of an Underwater Ramjet Powered by Compressed Air

Part I contains the results of a preliminary experimental investigation of a particular design of an underwater ramjet or hydroduct powered by compressed air. The hydroduct is a propulsion device in which the energy of an expanding gas imparts additional momentum to a stream of water through mixing. The hydroduct model had a fineness ratio of 5.9, a maximum diameter of 3.2 inches, and a ratio of inlet area to frontal area of 0.32. The model was towed at a depth of 1 inch at forward speeds between 20 and 60 feet per second for airflow rates from 0.1 to 0.3 pound per second. Longitudinal force and pressures at the inlet and in the mixing chamber were determined. The hydroduct produced a positive thrust-minus-drag force at every test speed. The force and pressure coefficients were functions primarily of the ratio of weight airflow to free-stream velocity. The maximum propulsive efficiency based on the net internal thrust and an isothermal expansion of the air was approximately 53 percent at a thrust coefficient of 0.10. The performance of the test model may have been influenced by choking of the exit flow. Part II is a theoretical development of an underwater ramjet using air as "fuel." The basic assumption of the theoretical analysis is that a mixture of water and air can be treated as a compressible gas. More information on the properties of air-water mixtures is required to confirm this assumption or to suggest another approach. A method is suggested from which a more complete theoretical development, with the effects of choking included, may be obtained. An exploratory computation, in which this suggested method was used, indicated that the effect of choked flow on the thrust coefficient was minor.

Mottard, Elmo J.↗

Feasibility test of a solid state spin-scan photo-imaging system

The feasibility of using a solid-state photo-imaging system to obtain resolution imagery from a Pioneer-type spinning spacecraft in future exploratory missions to the outer planets is discussed. Evaluation of the photo-imaging system performance, based on electrical video signal analysis recorded on magnetic tape, shows that the signal-to-noise (S/N) ratios obtained at low spatial frequencies exceed the anticipated performance and that measured modulation transfer functions exhibited some degradation in comparison with the estimated values, primarily owing to the difficulty in obtaining a precise focus of the optical system in the laboratory with the test patterns in close proximity to the objective lens. A preliminary flight model design of the photo-imaging system is developed based on the use of currently available phototransistor arrays. Image quality estimates that will be obtained are presented in terms of S/N ratios and spatial resolution for the various planets and satellites. Parametric design tradeoffs are also defined.

Laverty, N. P.↗

Correlations Between Metallurgical Characterization Studies, Exploratory Mechanical Tests, and Continuum Mechanics Approaches to Constitutive Equations

Austenitic stainless steels, such as types 316 and 304, are widely used as pressure vessel materials in the temperature range of 425 to 650 C. Stainless steel specimens were tested to rupture at two different stress levels sigma and sigma 2 sigma 1 sigma 2) to establish the normal stain-time behavior. A subsequent test was performed in which the specimen was crept at the higher stress (sigma 1) to the beginning of the secondary stage of creep, presumed to be the strain/time conditions at which a steady state microstructure is developed, and then the stress was reduced to the lower level (sigma 2). The associated microstructure, and significance of this microstructure on the creep strain-hardening model for variable uniaxial loads were assesed and found to be consistent with the use of creep-recovery models at high stresses and temperatures and strain-hardening models at low stresses and tempertures.

Moteff, J.↗

Nucleon tomography and total angular momentum of valence quarks from synergy between lattice QCD and elastic scattering data

We present an exploratory work on integrating lattice-QCD results with experimental data for elastic scattering. Within the framework of generalized parton distributions, this approach allows for the extraction of detailed information about nucleon tomography and the total angular momentum carried by valence quarks. To accomplish this reliably, we introduce a new quantity, the “double ratio,” which significantly reduces the systematic uncertainties inherent in lattice QCD computations. Moreover, we introduce a “shadow” term in the extraction procedure, which is sensitive only to lattice-QCD results. This term allows us to investigate the model dependence of the extraction, providing a more flexible description of the nucleon that goes beyond the previously considered bell-shaped distribution.

Lattice QCD↗

Vibrational Spectroscopy for the Determination of Ionizable Group Content in Ionomer Materials

An approach based on vibrational spectral measurements is described for determining the ionizable group content of ion conducting polymer membrane materials. Aimed at supporting the assessment of membrane stability and wear characteristics, performance is evaluated for attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy, confocal Raman microscopy, and ATR FT-IR microscopy using perfluorinated ionomer membrane standards. One set of ionomer standards contained a sulfonic acid ionizable group and the other a sulfonyl imide group. The average number of backbone tetrafluoroethylene (TFE) units separating the ionizable-group containing side chains was in the range of 7.2–2.1 (sulfonic acid set) and 10.5–4.6 (sulfonyl imide set). A poly(tetrafluoroethylene) (PTFE) sample was included as a blank, representing the limit of zero ionizable group (and maximum TFE) content. Calibration relationships were derived from area-normalized vibrational spectra. For all three methods, calibration models applied to independent spectral measurements of samples predicted the ratio of backbone TFE groups to ionizable groups in the repeat unit ( m) with a standard error of ≤ ±0.3. The confocal Raman and ATR FT-IR microscopy techniques achieved ideal blank responses and the lowest prediction errors, down to m ± 0.1 at the 90% confidence level. With its relative simplicity, low sample size requirements, and potential for quantitative micron-scale spatial mapping of the ionizable group content within a membrane, the approach has application to advancing materials development, including exploratory synthesis, durability and wear assessment, and in situ studies of membrane process.

Korzeniewski, Carol↗

THE GLOBAL IMPLICATIONS OF THE HARD X-RAY EXCESS IN TYPE 1 ACTIVE GALACTIC NUCLEI

Recent evidence for a strong 'hard excess' of flux at energies {approx}> 20 keV in some Suzaku observations of type 1 active galactic nuclei (AGNs) has motivated an exploratory study of the phenomenon in the local type 1 AGN population. We have selected all type 1 AGNs in the Swift Burst Alert Telescope 58 month catalog and cross-correlated them with the holdings of the Suzaku public archive. We find the hard excess phenomenon to be a ubiquitous property of type 1 AGNs. Taken together, the spectral hardness and equivalent width of Fe K{alpha} emission are consistent with reprocessing by an ensemble of Compton-thick clouds that partially cover the continuum source. In the context of such a model, {approx}80% of the sample has a hardness ratio consistent with >50% covering of the continuum by low-ionization, Compton-thick gas. A more detailed study of the three hardest X-ray spectra in our sample reveal a sharp Fe K absorption edge at {approx}7 keV in each of them, indicating that blurred reflection is not responsible for the very hard spectral forms. Simple considerations place the distribution of Compton-thick clouds at or within the optical broad-line region.

79 ASTRONOMY AND ASTROPHYSICS↗

An exploratory investigation of a wake disruption technique for studying wake reestablishment time

An exploratory investigation was made of a wake disruption technique for studying the hypersonic-wake reestablishment time in a blowdown wind tunnel. In this technique, a highly underexpanded jet issuing from the base of a 10 deg half-angle cone totally disrupts and displaces the conventional wake. The jet was rapidly shut off by an explosively actuated valve and the time for wake reestablishment was measured. The tests were conducted in the Mach 6 high Reynolds number tunnel at a stagnation temperature of 506 K and stagnation pressure of 2.86 MPa. The model base jet stagnation pressure was 3.55 MPa at room temperature. High-speed schlieren motion pictures indicated that disappearance of the disrupting jet and reestablishment of the wake-recompression shock were probably occurring simultaneously and that the time disruptive-jet-air shutoff to wake recompression shock reestablishment was probably between 200 and 450 microseconds (flow lengths from 1.8 to 4.2). The values of flow lengths are about one-thord to one-half the values measured in impulse facilities in a previous study. This shorter time is believed to be largely due to difference in flow conditions between the jet disruption technique and impulse facilities.

Clark, L. E.↗

Exploratory Investigation of Disengagements and Crashes in Autonomous Vehicles Under Mixed Traffic: An Endogenous Switching Regime Framework

Autonomous Vehicles (AVs) have a large potential to improve traffic safety but also pose some critical challenges. While AVs may help reduce crashes caused by human error, they still may experience failures of technologies and sensing, as well as decision-making errors in a mixed traffic environment. A disengagement refers to an AV transitioning control from autonomous systems to the trained test driver. The safety critical nature of disengagements makes it imperative to analyze disengagements and crashes together. In this study, we analyze both crashes and disengagements from real-world AV driving in California to fill the knowledge gap regarding the relationship between disengagements and crashes in a mixed traffic environment. A nested logit model was calibrated using three different outcomes: (1) disengagement with a crash, (2) disengagement with no crash, and (3) no disengagement with a crash. Furthermore, endogenous switching regime models were also calibrated to draw distinctions between the relation of disengagements and crashes while accounting for endogeneity effects. The results show that factors related to AV systems (such as software failures) and other roadway participants increase the propensity of a disengagement without a crash. Furthermore, AVs were observed to disengage less often as the technology matured over time. Marginal effects revealed an 8% decrease. The results thus suggest that disengagements are a part of AVs' safe performance and disengagement alerts may need to be triggered in order to avoid certain failures with current technology.

42 ENGINEERING↗

Behavioral consequences of low dose radiation and sex differences in MCAT mouse model

Our study used 1-year old C57BL/6NJ male and female mice (astronaut-relevant age) that underwent exposure to 0.5 gray of gamma radiation and were euthanized 12 weeks after. In this study, we used an MCAT mouse model for mitochondrial ROS quenching, which overexpress human catalase. MCAT mice were shown to live longer and age better. Hence, in this study we determined whether quenching ROS in the mitochondria will mitigate the adverse effects of ionizing radiation exposure on spaceflight-relevant tissues. As part of the analysis, we have completed 5 different behavioral tests which focus on memory, physical stance, stress, anxiety, and other mission relevant behaviors. In the Neuro-score battery, performed after both 1and 8 weeks post IR we saw that all female groups had significantly higher scores compared to males. When comparing the baseline vs 8 weeks of radiation, we saw that all the male groups (including the sham) had lower neuro-score, pointing out to aging effect in addition to IR. In the female groups only the female IR group had lower neuro-score and the MCAT group was protected from this effect. In the Nestlet building test we saw similarly that only females were affected by radiation, having lower scores and this effect was mitigated in the MCAT animals as well. In the Catwalk test we saw that females were faster, had higher swing speed and stride length in all four paws. Males had higher stand, step cycle and max contact area. Aging is associated with slowing of gait speed, swing speed and shortening of stride length which we see in males, this is consistent with physical appearance where males look markedly older. In the Light-Dark Box test we saw that females were more frequently present in the light side and altered zones more frequently, pointing out to a more exploratory and less anxious pattern of behavior. Similarly, to what was detected in the Nest building and Neuro-score test, in the Barnes maze test, during the acquisition phase (learning) we saw that IR affected more the females who did not do better in the maze after 4 days. On the other hand, during the probe phase of the test (spatial memory) the females visited the target hole and the box quadrant more often, but also had more errors vs males, which points out to possible serial escape vs spatial escape strategy. Overall, we see that older females look physically better are faster and perform better almost in all behavioral tests compared to their male counterparts. On the other hand, they are more sensitive to low dose radiation in many cases, in some cases this effect was mitigated in the MCAT model pointing out to the importance of ROS in these stressors. In the near future we will focus on corelating these behavioral tests with molecular findings such as for example brain IHC, plasma and hippocampal cytokines in order to find specific biomarkers for behavioral deficits.

radiation↗

An Interpretable Index of Social Vulnerability to Environmental Hazards

Index-based measures of social vulnerability to environmental hazards are commonly modeled from composites of population-level risk factors. These models overlook individual context in communities' experiences of environmental hazards, producing metrics that may hinder spatial decision support for mitigating and responding to hazards. This paper introduces an interpretable, high-resolution model for generating an individual-oriented social vulnerability index (IOSVI) for the United States built on synthetic populations that couples individual and social determinants of vulnerability. The IOSVI combines an individual vulnerability index (IVI) that ranks individuals in an area’s synthetic population based on intersecting risk factors, with a social vulnerability index (SVI) based on the population’s cumulative distribution of IVI scores. Interpretability of the IOSVI procedure is demonstrated through examples of national, metropolitan, and neighborhood (census tract) level spatial variation in index scores and IVI themes, as well as an exploratory analysis examining risk factors affecting a specific sub-population (military veterans) in areas of high social and environmental vulnerability.

Tuccillo, Joe↗