Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gradient estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

The density of apical cells of dark-grown protonemata of the moss Ceratodon purpureus

Determinations of plant or algal cell density (cell mass divided by volume) have rarely accounted for the extracellular matrix or shrinkage during isolation. Three techniques were used to indirectly estimate the density of intact apical cells from protonemata of the moss Ceratodon purpureus. First, the volume fraction of each cell component was determined by stereology, and published values for component density were used to extrapolate to the entire cell. Second, protonemal tips were immersed in bovine serum albumin solutions of different densities, and then the equilibrium density was corrected for the mass of the cell wall. Third, apical cell protoplasts were centrifuged in low-osmolarity gradients, and values were corrected for shrinkage during protoplast isolation. Values from centrifugation (1.004 to 1.015 g/cm3) were considerably lower than from other methods (1.046 to 1.085 g/cm3). This work appears to provide the first corrected estimates of the density of any plant cell. It also documents a method for the isolation of protoplasts specifically from apical cells of protonemal filaments.

NASA Discipline Plant Biology↗
DOE OSTI2025

Machine learning for fundamental spectroscopic and thermodynamic data of actinides and lanthanides

Accurately modeling optical spectra with absolute radiometric intensities is vital for nuclear forensics applications that depend on characterizing optical emissions from energetic nuclear phenomena. This requires precise knowledge of the individual atomic transition probabilities, known as Einstein A-coefficients, for each emission line. Obtaining these values theoretically or experimentally is often impractical due to the complex electronic structures and the number of transitions involved in atoms relevant to nuclear applications. In this study, we explore the use of machine learning to predict the Einstein A coefficients for atomic transitions. Seven models were evaluated that ranged from deep learning to decision tree algorithms, and found that gradient boosting performed best, specifically the Extreme Gradient Boosting (XGB) architecture, achieving a precision of 86% across transitions of 36 elements. Furthermore, the model was cross-validated using published transition probabilities reported in the literature and applied to estimate Pu plasma temperatures from a previous experiment conducted at Savannah River National Laboratory.

Atomic spectroscopy↗
DOE OSTI2023

Thermal Disorder‐Induced Strain and Carrier Localization Activate Reverse Halide Segregation

The reversal of halide ions is studied under various conditions. However, the underlying mechanism of heat-induced reversal remains unclear. This work finds that dynamic disorder-induced localization of self-trapped polarons and thermal disorder-induced strain (TDIS) can be co-acting drivers of reverse segregation. Localization of polarons results in an order of magnitude decrease in excess carrier density (polaron population), causing a reduced impact of the light-induced strain (LIS – responsible for segregation) on the perovskite framework. Meanwhile, exposing the lattice to TDIS exceeding the LIS can eliminate the photoexcitation-induced strain gradient, as thermal fluctuations of the lattice can mask the LIS strain. Under continuous 0.1 W cm -2 illumination (upon segregation), the strain disorder is estimated to be 0.14%, while at 80 °C under dark conditions, the strain is 0.23%. However, in situ heating of the segregated film to 80 °C under continuous illumination (upon reversal) increases the total strain disorder to 0.25%, where TDIS is likely to have a dominant contribution. Therefore, the contribution of entropy to the system's free energy is likely to dominate, respectively. Various temperature-dependent in situ measurements and simulations further support the results. These findings highlight the importance of strain homogenization for designing stable perovskites under real-world operating conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Training quantum neural networks using the quantum information bottleneck method

Abstract We provide in this paper a concrete method for training a quantum neural network to maximize the relevant information about a property that is transmitted through the network. This is significant because it gives an operationally well founded quantity to optimize when training autoencoders for problems where the inputs and outputs are fully quantum. We provide a rigorous algorithm for computing the value of the quantum information bottleneck quantity within error ε that requires O ( log 2 ⁡ ( 1 / ϵ ) + 1 / δ 2 ) queries to a purification of the input density operator if its spectrum is supported on { 0 } ⋃ [ δ , 1 − δ ] for δ > 0 and the kernels of the relevant density matrices are disjoint. We further provide algorithms for estimating the derivatives of the QIB function, showing that quantum neural networks can be trained efficiently using the QIB quantity given that the number of gradient steps required is polynomial.

Çatlı, Ahmet Burak (ORCID:0000000152294141)↗
DOE OSTI2025

Renewable Energy Potential Model: Hawaii Geothermal Supply Curves

This dataset extends the development of the Renewable Energy Potential (reV) model to include geothermal energy, with a specific focus on Hawaii. Provided here are the results of two scenarios that were modeled for geothermal energy in Hawaii: binary enhanced geothermal systems (EGS) at a depth of 2.5 km and hydrothermal binary systems at a depth of 1.5 km. The resource data for both scenarios were derived from Lautze and Haskins (2024) using an exponential method. The PFA probability of heat map was used as a look up table for which temperature gradient to use (Lautze and Haskins, 2024). The dataset provides geospatial and techno-economic details for evaluating geothermal energy potential. It includes spatial coordinates, estimated capacity factors, developable area, resource potential, and annual energy production metrics. Economic details such as levelized cost of electricity (LCOE), site development costs, transmission costs, and fixed-charge rates are also included. The reV model, originally developed for wind and solar energy, incorporates these variables to evaluate deployment constraints related to land use, environmental and cultural factors, and grid integration.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

Reconstructing the Stripping History of the Sagittarius Stream with Neural Networks

The Sagittarius (Sgr) Stream is produced by the ongoing disruption of the Sgr dwarf spheroidal (dSph) galaxy and is thought to contain multiple wraps that were stripped during different pericentric passages. In this study, we introduce a neural-network–based method trained on N-body simulations to infer the stripping time of Sgr Stream stars directly from their phase-space coordinates. We combine spectroscopic data from SEGUE, APOGEE DR17, and LAMOST DR7 low-resolution spectroscopic (LRS) survey with Gaia EDR3 astrometry and distance estimates from the latest StarHorse catalog to identify high-quality Sgr Stream members. Applying our method to these stars, we measure a clear metallicity gradient with stripping time, well described by a linear relation with slope ∼0.3 dex Gyr −1 . We further predict the stripping times of globular clusters previously suggested to originate from the Sgr dSph. M 54, Terzan 7, Terzan 8, and Arp 2 exhibit stripping times consistent with being currently bound to the Sgr remnant. Pal 12, Whiting 1, and NGC 2419 are inferred to have been stripped 0.9 ± 0.1, 1.1 ± 0.2, and 2.1 ± 0.2 Gyr ago, respectively. For NGC 4147 and NGC 5634, whose membership in the Sgr system remains uncertain, our analysis suggests stripping times of 1.1 ± 0.4 and 1.1 ± 0.1 Gyr, respectively, if they are ultimately confirmed as genuine Sgr members. These results demonstrate that data-driven models of dynamical stripping histories offer a promising approach for reconstructing the formation and chemical evolution of the Sgr Stream.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1979

Applications of velocity potential function to acoustic duct propagation and radiation from inlets using finite element theory

A finite element velocity potential program was developed to study acoustic wave propagation in complex geometries. For irrotational flows, relatively low sound frequencies, and plane wave input, the finite element solutions showed significant effects of inlet curvature and flow gradients on the attenuation of a given acoustic liner in a realistic variable area turbofan inlet. The velocity potential approach can not be used to estimate the effects of rotational flow on acoustic propagation, since the potential acoustic disturbances propagate at the speed of the media in sheared flow. Approaches are discussed that are being considered for extending the finite element solution to include the far field, as well as the internal portion of the duct. A new matrix partitioning approach is presented that can be incorporated in previously developed programs to allow the finite element calculation to be marched into the far field. The partitioning approach provided a large reduction in computer storage and running times.

Baumeister, K. J.↗
NASA NTRS1991

Horizontal stress in planetary lithospheres from vertical processes

Understanding the stress states in a lithosphere is of fundamental importance for planetary geophysics. It is closely linked to the processes which form and modify tectonic features on the surface and reflects the behavior of the planet's interior, providing a constraint for the difficult problem of determining interior structure and processes. The tectonics on many extraterrestrial bodies (Moon, Mars, and most of the outer planet satellites) appears to be mostly vertical, and the horizontal stresses induced by vertical motions and loads are expected to dominate the deformation of their lithospheres. Herein, only changes are examined in the state of stress induced by processes such as sedimentary and volcanic deposition, erosional denudation, and changes in the thermal gradient that induce uplift or subsidence. This analysis is important both for evaluating stresses for specific regions in which the vertical stress history can be estimated, as well as for applying the proper loading conditions to global stress models. All references to lithosphere herein should be understood to refer to the elastic lithosphere, that layer which deforms elastically or brittlely when subjected to geologically scaled stresses.

Banerdt, W. B.↗
NASA NTRS1992

Gravity and the geoid in the Nepal Himalaya

Materials within the Himalaya are rising due to convergence between India and Asia. If the rate of erosion is comparable to the rate of uplift, the mean surface elevation will remain constant. Any slight imbalance in these two processes will lead to growth or attrition of the Himalaya. Although buried rocks, minerals and surface control points in the Himalaya are undoubtably rising, the growth or collapse or the Himalaya depends on the erosion rate which is invisible to geodetic measurements. A way to measure erosion rate is to measure the rate of change of gravity in a region of uplift. Essentially gravity should change precisely in accord with a change in elevation of the point in a free air gradient if erosion equals uplift rate. A measurement of absolute gravity was made simultaneously with measurements of GPS height within the Himalaya. Absolute gravity is estimated from the change in velocity per unit distance of a falling corner cube in a vacuum. Time is measured with an atomic clock and the unit distance corresponds to the wavelength of an iodine stabilized laser. An experiment undertaken in the Himalaya in 1991 provide a site description also with a instrument description.

Bilham, Roger↗
NASA NTRS1993

Horizontal stresses induced by vertical processes in planetary lithospheres

Understanding the state of stress in the elastic lithosphere is of fundamental importance for planetary geophysics, as it is the link between the observed geologic structures on the surface and the processes which form and modify these structures. As such, it can provide valuable constraints for the difficult problem of determining interior structure and processes. On the Earth, most large scale, organized deformation can be related to lateral tectonics associated with plate dynamics; however, the tectonics on many extraterrestrial bodies (such as the Moon, Mars, and most of the outer-planet satellites) appears to be primarily vertical in nature, and the horizontal stresses induced by vertical motions and loads are expected to dominate the deformation of their lithospheres. The largest stress contributions from vertical loading come from the flexure of the lithosphere, which induces both bending moments and membrane stresses. We are concerned here only with nonflexural changes in the state of stress induced by processes such as sedimentary and volcanic deposition, erosional denudation, and changes in the thermal gradient that induce uplift or subsidence. This analysis is important both for evaluating stresses for specific regions in which the vertical stress history can be estimated, as well as for applying the proper loading conditions to global stress models. It is also of interest for providing a reference state of stress for interpreting stress measurements in the crust of the Earth.

Banerdt, W. B.↗
NASA NTRS1995

Lyman alpha emissions in the outer heliosphere

Since 1993, the Ultraviolet Spectrometers aboard both Voyager 1 and 2, were used to study the Ly-alpha glow pattern backscattered by neutral hydrogen atoms at great distance from the sun. When compared to a radiative transfer calculation for an unperturbed interstellar hydrogen flow into the solar system, the data present an excess of intensity seen in the direction of the incoming interstellar wind. An absolute estimate of this Lyman alpha intensity yields 10 to 15 Rayleighs for each spacecraft. We discuss the possibility that this excess is caused by a gradient of hydrogen at large distance from the Sun due to the filtration of interstellar hydrogen when crossing the heliopause. Comparisons with results from the Baranov-Malama model of neutral-plasma coupling at the heliopause are presented. The data yield a range of possible values for the hydrogen gradient which may be used to infer the location of the heliopause.

Quemerais, E.↗
NASA NTRS2000

Independent controls for neocortical neuron production and histogenetic cell death

We estimated the proportion of cells eliminated by histogenetic cell death during the first 2 postnatal weeks in areas 1, 3 and 40 of the mouse parietal neocortex. For each layer and for the subcortical white matter in each neocortical area, the number of dying cells per mm(2) was calculated and the proportionate cell death for each day of the 2-week interval was estimated. The data show that cell death proceeds essentially uniformly across the neocortical areas and layers and that it does not follow either the spatiotemporal gradient of cell cycle progression in the pseudostratified ventricular epithelium of the cerebral wall, the source of neocortical neurons, or the 'inside-out' neocortical neuronogenetic sequence. Therefore, we infer that the control mechanisms of neocortical histogenetic cell death are independent of mechanisms controlling neuronogenesis or neuronal migration but may be associated with the ingrowth, expansion and a system-wide matching of neuronal connectivity. Copyright 2000 S. Karger AG, Basel.

NASA Discipline Cell Biology↗
NASA NTRS2019

Evidence for Dry Carbonatite Metasomatism in the Oceanic Lithosphere from Peridotite Xenoliths of Samoa and Lanzarote

Water in Earth’s mantle affects processes like magmatism and plate tectonics. Experiments show that CO2-rich fluids lower the water solubility in olivine, implying that CO2-rich melts/fluids may dehydrate the lithosphere during metasomatism. To test this hypothesis, we report water concentrations (by polarized FTIR) of olivines, orthopyroxenes (OPX) and clinopyroxenes (CPX) from Savai’i (Samoa) and Lanzarote (Canary Islands) peridotite xenoliths with evidence of carbonatite metasomatism. Savai’i peridotites are highly depleted harzburgites and dunites with spinel Cr# (Cr/(Cr+Al)) ranging from 0.4 to 0.76 (estimated degree of melting: 191.5%). Strong Light Rare Earth Element (LREE) enrichments with Ti and Zr depletions in OPX and CO2-rich fluid inclusions (via Raman spectroscopy) are consistent with carbonatite metasomatism. Olivine, OPX and reconstructed bulk rock water concentrations (0.67-3.8, 17-89 and 4-26 ppm H2O, respectively) are low and show no apparent relationship with extent of carbonatite metasomatism. Calculated water concentrations of melts in equilibrium with Savai’i OPX (OPX/melt partitioning of water 0.0063 to 0.011) are, on average (0.540.32 wt% H2O), lower than host Samoan lavas (0.63 to 1.5 wt% H2O), despite the LREE enrichments in OPX. Lanzarote peridotites are also highly depleted (degree of melting from spinel Cr#: 171.8%).Water concentrations are low in olivines (1.7-5.3 ppm H2O) and variable in pyroxenes (OPX: 42-103 ppm H2O; CPX: 105-301 ppm H2O), and show no apparent correlation with indicators of carbonatite metasomatism. Both Savai’i and Lanzarote peridotites show negative correlations between water and degree of melting (i.e. Mg/(Mg+Fe), Cr#), suggesting melt depletion rather than metasomatism may have influenced their water concentrations. Calculated water concentrations of melts in equilibrium with Lanzarote CPX (average 1.90.75 wt% H2O; CPX/melt partitioning of water 0.011 to 0.012) are similar to those for Western Canaries lavas (average 1.80.31 wt%; CPX/melt partitioning of water 0.016 to 0.021) inferred from their CPX phenocrysts. However, calculated Ce concentrations in such melts (352 to 378 ppm; CPX/melt partitioning of Ce 0.07) are an order of magnitude greater than the lavas, and similar to carbonatites. This leads to H2O/Ce to be an order of magnitude lower in the inferred melts (26 to 57) than estimates for Western Canary lavas (280150). These low H2O/Ce ratios may suggest H2O loss from CPX during ascent, but the lack of strong water diffusion gradients in Lanzarote minerals does not support this. Instead we hypothesize that carbonatite metasomatism resulted in greater enrichment of Ce over H2O. Assuming carbonatite magmas are water rich, this implies a lower partitioning of water between minerals and melts during metasomatism, as suggested by experiments. Our data suggests carbonatite metasomatism does not result in significant re-hydration of the lithosphere, in contrast to silicate metasomatism as previously observed in Hawaiian peridotites.

Ashley, Aaron↗
NASA NTRS1987

Differential surface models for tactile perception of shape and on-line tracking of features

Tactile perception of shape involves an on-line controller and a shape perceptor. The purpose of the on-line controller is to maintain gliding or rolling contact with the surface, and collect information, or track specific features of the surface such as edges of a certain sharpness. The shape perceptor uses the information to perceive, estimate the parameters of, or recognize the shape. The differential surface model depends on the information collected and on the a priori information known about the robot and its physical parameters. These differential models are certain functionals that are projections of the dynamics of the robot onto the surface gradient or onto the tangent plane. A number of differential properties may be directly measured from present day tactile sensors. Others may have to be indirectly computed from measurements. Others may constitute design objectives for distributed tactile sensors of the future. A parameterization of the surface leads to linear and nonlinear sequential parameter estimation techniques for identification of the surface. Many interesting compromises between measurement and computation are possible.

Hemami, H.↗
NASA NTRS2018

Planning and Execution for Front Delineation and Tracking with Multiple Underwater Vehicles

This work describes a planning architecture for a heterogeneous fleet of marine assets as well as a method for detecting and tracking ocean fronts using multiple autonomous underwater vehicles. Multiple vehicles — equally-spaced along the expected frontal boundary — complete near parallel transects orthogonal to the front. Lateral gradients are used to determine the location of the front crossing from each individual vehicle transect by detecting a change in the observed water property. Adaptive control of the vehicles ensure they remain perpendicular to the estimated frontal boundary as it evolves over time. This method was demonstrated in several experiment periods totaling weeks, in and around Monterey Bay, California in May and June of 2017. We discuss the challenges associated with the implementation of the planning system. We show the capability of this method for repeated sampling across a dynamic two-dimensional ocean front using a fleet of three types of platforms: short-range Iver AUVs, Tethys-Class Long-Range AUVs, and Seagliders. This method extends to tracking gradients of different properties using a variety of vehicles.

Chavez, Francisco P.↗
DOE OSTI2025

Accelerating Hamiltonian Monte Carlo for Bayesian inference in neural networks and neural operators

Hamiltonian Monte Carlo (HMC) is a powerful and accurate method to sample from the posterior distribution in Bayesian inference. However, HMC techniques are computationally demanding for Bayesian neural networks due to the high dimensionality of the network’s parameter space and the non-convexity of their posterior distributions. Therefore, various approximation techniques, such as variational inference (VI) or stochastic gradient MCMC, are often employed to infer the posterior distribution of the network parameters. Such approximations introduce inaccuracies in the inferred distributions, resulting in unreliable uncertainty estimates. In this work, we propose a hybrid approach that combines inexpensive VI and accurate HMC methods to efficiently and accurately quantify uncertainties in neural networks and neural operators. The proposed approach leverages an initial VI training on the full network. We examine the influence of individual parameters on the prediction uncertainty, which shows that a large proportion of the parameters do not contribute substantially to uncertainty in the network predictions. This information is then used to significantly reduce the dimension of the parameter space, and HMC is performed only for the subset of network parameters that strongly influence prediction uncertainties. This yields a framework for accelerating the full batch HMC for posterior inference in neural networks. We demonstrate the efficiency and accuracy of the proposed framework on deep neural networks and operator networks, showing that inference can be performed for large networks with tens to hundreds of thousands of parameters. Finally, we show that this method can effectively learn surrogates for complex physical systems by modeling the operator that maps from upstream conditions to wall-pressure data on a cone in hypersonic flow.

Bayesian inference↗
NASA NTRS1981

Origins of the low energy relativistic interplanetary electrons

Electron measurements in the energy range 2-25 MeV on the Pioneer 10 spacecraft are studied from 1 to 21.5 AU. It is found that in this radial range, interplanetary low energy electron fluxes are of Jovian origin, based on the decreasing electron intensity from about 6 to 21.5 AU, a negative gradient from about 11 to 21.5 AU, and the constant spectral index observed from 1 to 21.5 AU. The upper limit of the galactic flux is estimated at 12 MeV and standard assumptions are applied to solar modulation. It is found that at 1 AU, the expected flux of galactic origin is a factor 300 or more below the observed quiet time flux, and the extrapolated interstellar flux level is consistent with estimates based on galactic diffuse radio and gamma-ray emissions.

Eraker, J. H.↗
NASA NTRS1984

Flow-field investigation of a supercruise fighter model

A NASA Langley investigation was conducted in the 16-foot Transonic Tunnel to survey the flow field around a model of a Supersonic cruise fighter configuration. In this investigation, a model of a supersonic cruise fighter configuration formerly utilized in afterbody-nozzle performance investigations was surveyed with a single, multiholed probe to determine local values of angle of attack, side flow, and Mach number. The investigation was conducted at Mach numbers of 0.6, 0.9, and 1.2 at angles of attack from 0 to 10 deg. The purpose of the investigation was to provide a data base of experimental data for use in verification of theoretical methods, and to compare the experimental data with predictions from currently available theoretical techniques. Results from this investigation show that local angles of attack were generally greater than free stream above the wing and generally less than free stream below the wing. Also there were large spanwise gradients above the wing at the higher angles of attack. The comparisons of experimental data with theoretical predictions show that the theoretical techniques give a qualitative estimate of the flow-field but will require much work to give good quantitative results.

Reubush, D. E.↗