SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The heating of stellar chromospheres and coronae by the dissipation of acoustic waves is an important heating mechanism. It is only in the lower solar chromosphere that short period acoustic wave heating seems undisputed. The arguments leading to the rejection of the so called acoustic heating theory are derived from comparisons of calculated acoustic energy fluxes with observational or theoretical requirements.
The orbital motions of the Galilean satellites exert dramatic control over their physical properties (most notably Io's) through tidal heating. In turn, tidal dissipation in the satellites, as well as in Jupiter, has governed the evolution of the orbits and, in particular, of the Laplace resonance. If the system started out of the resonance and evolved into it, forced eccentricities would have increased with time. Hence, the tidal melting of Io and the cracking of Europa'a surface may have occurred relatively recently. This theory requires that Jupiter's tidal dissipation factor be greater than about two million, a rather low value (high rate of tidal dissipation) compared with most models of Jovian interior processes. Alternatively, the system may have started even deeper in the resonance than it is today, a scenario which is consistent with larger values of the tidal dissipation factor. This model, with its correspondingly large initial forced eccentricities, would imply (1) that Io melted early and fast, and may have remained molten with only a thin solid skin until the present and (2) that the water mantles of both Europa and Ganymede remained largely molten for considerably longer than Callisto did, but later froze as their eccentricities and tidal heating decreased.
The losses in a conceptual scramjet combustor at flight Mach numbers of 8, 10, 12, 16 and 20 are computed. These losses are extracted from three-dimensional parabolized Navier-Stokes solutions of the turbulent, reacting combustor flow field. A combustor performance index was defined based on the rationale that an efficient scramjet combustor should add heat to the fluid in such a manner as to maximize the stream thrust at the combustor exit while minimizing the losses. This index showed a decrease of more than 40 percent as the flight Mach number increased from 8 to 20, indicative of a drop in the thrust-producing potential of the scramjet at the upper end of the speed regime studied. A breakdown of the losses showed that dissipation, nonequilibrium chemistry and heat diffusion contributed roughly 15 percent, 35 percent, and 50 percent to the irreversible increase in entropy at Mach 8 and 22 percent, 13 and 65 percent at Mach 20.
The possibility is examined that the corona is heated by a train of weak switch-on shocks which are formed in the chromosphere from a train of Alfven waves, and which subsequently enter the corona from below. New results for the shock train propagation and dissipation and the resultant coronal heating are derived. It is shown that most of the energy in the shock train can be dissipated within one or two solar radii above the coronal base. A train of switch-on shocks therefore represents a viable coronal heating mechanism. The results are generalized to switch-on shocks in the solar wind. It is shown that such shocks can dissipate rapidly, but it is concluded that they are not the dominant factor governing the evolution of the solar wind turbulence.
A miniature, low-power broadband light source has been developed for aerospace applications, including calibrating spectrometers and powering miniature optical sensors. The initial motivation for this research was based on flight tests of a Fabry-Perot fiberoptic temperature sensor system used to detect aircraft engine exhaust gas temperature. Although the feasibility of the sensor system was proven, the commercial light source optically powering the device was identified as a critical component requiring improvement. Problems with the light source included a long stabilization time (approximately 1 hr), a large amount of heat generation, and a large input electrical power (6.5 W). Thus, we developed a new light source to enable the use of broadband optical sensors in aerospace applications. Semiconductor chip-based light sources, such as lasers and light-emitting diodes, have a relatively narrow range of emission wavelengths in comparison to incandescent sources. Incandescent light sources emit broadband radiation from visible to infrared wavelengths; the intensity at each wavelength is determined by the filament temperature and the materials chosen for the filament and the lamp window. However, present commercial incandescent light sources are large in size and inefficient, requiring several watts of electrical power to obtain the desired optical power, and they emit a large percentage of the input power as heat that must be dissipated. The miniature light source, developed jointly by the NASA Glenn Research Center, the Jet Propulsion Laboratory, and the Lighting Innovations Institute, requires one-fifth the electrical input power of some commercial light sources, while providing similar output light power that is easily coupled to an optical fiber. Furthermore, it is small, rugged, and lightweight. Microfabrication technology was used to reduce the size, weight, power consumption, and potential cost-parameters critical to future aerospace applications. This chip-based light source has the potential for monolithic fabrication with on-chip drive electronics. Other uses for these light sources are in systems for vehicle navigation, remote sensing applications such as monitoring bridges for stress, calibration sources for spectrometers, light sources for space sensors, display lighting, addressable arrays, and industrial plant monitoring. Two methods for filament fabrication are being developed: wet-chemical etching and laser ablation. Both yield a 25-mm-thick tungsten spiral filament. The proof-of-concept filament shown was fabricated with the wet etch method. Then it was tested by heating it in a vacuum chamber using about 1.25 W of electrical power; it generated bright, blackbody radiation at approximately 2650 K. The filament was packaged in Glenn's clean-room facilities. This design uses three chips vacuum-sealed with glass tape. The bottom chip consists of a reflective film deposited on silicon, the middle chip contains a tungsten filament bonded to silicon, and the top layer is a transparent window. Lifetime testing on the package will begin shortly. The emitted optical power is expected to be approximately 1.0 W with the spectral peak at 1.1 mm.
It was recently proposed that the electron-frame dissipation measure, the energy transfer from the electromagnetic field to plasmas in the electron s rest frame, identifies the dissipation region of collisionless magnetic reconnection [Zenitani et al., Phys. Rev. Lett. 106, 195003 (2011)]. The measure is further applied to the electron-scale structures of antiparallel reconnection, by using two-dimensional particle-in-cell simulations. The size of the central dissipation region is controlled by the electron-ion mass ratio, suggesting that electron physics is essential. A narrow electron jet extends along the outflow direction until it reaches an electron shock. The jet region appears to be anti-dissipative. At the shock, electron heating is relevant to a magnetic cavity signature. The results are summarized to a unified picture of the single dissipation region in a Hall magnetic geometry.
The performance is discussed of 10-micron mercury-cadmiumtelluride and lead-tin-telluride photodiodes in laser heterodyne communication systems. The dependence of detector quantum efficiency, resistance, frequency response, and signal-to-noise ratio on temperature, bias, and local oscillator power are examined. Included in the discussion is an analysis of the feasibility of high temperature operation, and ability of the detector to dissipate power to a heat sink is explored. Some aspects of direct detection response are considered and figures showing flux levels from a blackbody presented.
A detailed theoretical study is made of radiatively driven acoustic waves inside a closed cylindrical tube. The formulation accounts for all the essential phenomena for a gas in vibrational equilibrium - namely, gas motion, longitudinal and radial viscous dissipation, longitudinal and radial heat conduction, and radiative transfer with spectral detail included. An approximate expression is derived for the pressure response. This solution is applicable to arbitrary spectral distribution of the radiative absorption coefficient, under conditions attainable in the laboratory. The solution includes both tuned and untuned acoustic conditions as well as the spectrophone limit - that is, the condition where the length of the tube is much smaller than the length of the acoustic wave. The influence of spectral detail on the pressure response is illustrated.
Results of the effort of designing, fabricating, and testing of a 40 joules/lb (88.2 joules/Kg) high voltage energy storage capacitor suitable for operating a pulsed plasma thruster in a vacuum environment for millions of pulses are presented. Using vacuum brazing and heli-arc welding techniques followed by vacuum and high pressure helium leak tests it was possible to produce a hermetically sealed relatively light weight enclosure for the dielectric system. An energy density of 40 joules/lb was realized with a KF-polyvinylidene fluoride dielectric system. One capacitor was D.C. life tested at 4 KV (107.8 joules/lb) for 2,000 hours before it failed. Another exceeded 2,670 hours without failure at 38.3 joules/lb. Pulse life testing in a vacuum exceeded 300,000 discharges with testing still in progress. The D.C. life test data shows a small decrease in capacitance and an increase in dissipation factor with time. Heat transfer from the load to the capacitor must also be considered besides the self-heat generated by the capacitor.
Thirty-five (35) furnace runs were carried out during this quarter, of which 25 produced a total of 120 web crystals. The two main thermal models for the dendritic growth process were completed and are being used to assist the design of the thermal geometry of the web growth apparatus. The first model, a finite element representation of the susceptor and crucible, was refined to give greater precision and resolution in the critical central region of the melt. The second thermal model, which describes the dissipation of the latent heat to generate thickness-velocity data, was completed. Dendritic web samples were fabricated into solar cells using a standard configuration and a standard process for a N(+) -P-P(+) configuration. The detailed engineering design was completed for a new dendritic web growth facility of greater width capability than previous facilities.
High area throughput rate will be required for the economical production of silicon dendritic web for solar cells. Web width depends largely on the temperature distribution on the melt surface while growth speed is controlled by the dissipation of the latent heat of fusion. Thermal models were developed to investigate each of these aspects, and were used to engineer the design of laboratory equipment capable of producing crystals over 4 cm wide; growth speeds up to 10 cm/min were achieved. The web crystals were characterized by resistivity, lifetime and etch pit density data as well as by detailed solar cell I-V data. Solar cells ranged in efficiency from about 10 to 14.5% (AM-1) depending on growth conditions. Cells with lower efficiency displayed lowered bulk lifetime believed to be due to surface contamination.
Electrodynamic (Joule) dissipation and plasma wave heating are reviewed as sources of energy for the upper atmosphere at high latitudes. Electrodynamic heating in the thermosphere is described by a generalized energy balance equation taking into account a variety of inelastic processes and energy losses, and the use of height-integrated values of the Joule heating rate to estimate the importance of electrodynamic heating at high latitudes is discussed. Observations of electrons between 95 and 115 km altitude that are up to 1000 K hotter than the neutral atmosphere is presented as evidence for atmospheric heating due to unstable plasma waves arising from the Farley-Buneman modified two-stream instability.
For quasi-geostraphic stationary long waves forced by topography, the nonlinear lower boundary condition is derived in terms of the geopotential height and compared with the linearized version. The common practice of replacing terms describing the flow over and around a mountain by upstream zonal flow over the mountain and evaluating the resulting condition at sea level is found to be a good approximation for the cases considered and does not need to be modified as sometimes suggested. Specifically, it is found that this approximation does not affect, for most cases, the lower boundary condition expressed in terms of the geopotential height provided that the stationary wave is not near resonance. At resonance, the eddy advection terms may become important for large-amplitude waves when dissipation and surface diabatic heating are taken into account.
Explicitly magnetic field-independent relationships that quantitatively connect the thermodynamic state of the confined beta-less-than-one X-ray plasma to the confining magnetic loop characteristics and the stressing velocity at beta greater than about one are presented. The derived relations fall into two categories: (1) diffuse heating resulting from efficient transport of energy throughout the magnetic loop volume, and (2) isolated heating within the electrodynamic dissipation shell. For each of these cases the Joule dissipation, shear viscous dissipation, and compressional dissipation are considered. Each of these models is characterized by three thermodynamic scalings that are parametrized by the magnetic loop properties and by the stressing velocity. Eliminating the magnetic field intermediary from these relations and normalizing the inverse aspect ratio and the magnetic expansion factor with respect to solar conditions results in a single, unique velocity scaling law for each model.
Direct-current stepping motors used in computer peripherals, process control, and precision remote-positioning equipment constantly dissipate power and create heat even when not moving. Circuit design energizes stepper motor only when pulses are present on control input.
The propagation and shock formation of radiatively damped acoustic waves in the solar chromosphere are studied under the assumption that H(-) is the only absorber; the opacity is non-grey. Deviations from local thermodynamic equilibrium (LTE) are permitted. The results of numerical simulations show the depth dependence of the heating by the acoustic waves to be insensitive to the mean state of the atmosphere. After the waves have developed into shocks, their energy flux decays exponentially with a constant damping length of about 1.4 times the pressure scale height, independent of initial flux and wave period. Departures from LTE have a strong influence on the mean temperature structure in dynamical chromosphere models; this is even more pronounced in models with reduced particle density - simulating conditions in magnetic flux tubes - which show significantly increased temperatures in response to mechanical heating. When the energy dissipation of the waves is sufficiently large to dissociate most of the H(-) ions, a strong temperature rise is found that is reminiscent of the temperature structure in the transition zone between chromosphere and corona; the energy flux remaining in the waves then drives mass motions.
Steady, turbulent two-phase fluid flow in a rotating annular seal with no eccentricity is analyzed. The fluid is assumed to be a homogeneous mixture of liquid and vapor in thermodynamic equilibrum. Further, the flow is assumed to be adiabatic, but the effects due to heat generation by viscous dissipation are accounted for fully. Solution of the model governing differential equations is accomplished by use of a fourth-order Runge-Kutta numerical integration scheme. The calculation of mass leakage rates under choked and unchoked conditions are discussed and the phenomenon of all-liquid choked flow is explained. Several numerical examples are presented supposing cyrogenic oxygen as the sealed fluid.
The objective is to obtain quantitative information on the turbulent transport of mass, angular momentum, and energy under the conditions that characterize the solar nebula, by direct numerical calculations. These calculations were made possible by research conducted on supercomputers (Cray XMP and Cray 2) by the Ames Computational Fluid Dynamics Branch. Techniques were developed that permitted the accurate representation of turbulent flows over the full range of important eddy sizes. So far, these techniques were applied (and verified) primarily in mundane laboratory situations, but they have a strong potential for astrophysical applications. A sequence of numerical experiments were conducted to evaluate the Reynold's stress tensor, turbulent heat transfer rate, turbulent dissipation rate, and turbulent kinetic energy spectrum, as functions of position, for conditions relevant to the solar nebula. Emphasis is placed on the variation of these properties with appropriate nondimensional quantities, so that relations can be derived that will be useful for disk modeling under a variety of hypotheses and initial conditions.