Search NASA⌕ Search

SEARCH · Search NASA

Results for “INSOLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Atmospheric tides and the rotation of Venus. I - Tidal theory and the balance of torques

Insolation absorbed by the surface of Venus is quickly redeposited at the bottom of the atmosphere. This periodic heating causes mass to flow away from the warm afternoon side of the planet and into the cooler morning region. The Sun's gravitational field exerts a torque on this atmospheric tide tending to accelerate the retrograde zonal circulation. When this torque is transmitted to the crust, it can balance the despinning effect of tides in the body of Venus. The slow retrograde rotation of Venus may be a steady state among tides in the atmosphere, tides in the solid body, and possibly the influence of the Earth.

Dobrovolskis, A. R.↗

IR brightness and eclipse cooling of Saturn's rings

Equatorial scans of Saturn at 20 microns wavelength, obtained with the Mayall 4-m telescope in 1978-79, show a continuing decrease in the specific brightness of the A and B rings as the ring plane projection approaches and edge-on apparition. The decreased brightness of the previously dominant B ring reveals more clearly a large difference in brightness between the east and west ansae portions of the C ring, in contrast to a barely discernible difference for the other ring ansae. The amount of eclipse cooling is compatible with a C ring particle size of about 1 cm. It is proposed here that the B ring brightness variation could partially result from a decrease of absorbed insolation by a modest amount of visible scattering.

Nolt, I. G.↗

Comparison of advanced engines for parabolic dish solar thermal power plants

A paraboloidal dish solar thermal power plant produces electrical energy by a two-step conversion process. The collector subsystem is composed of a two-axis tracking paraboloidal concentrator and a cavity receiver. The concentrator focuses intercepted sunlight (direct, normal insolation) into a cavity receiver whose aperture encircles the focal point of the concentrator. At the internal wall of the receiver the electromagnetic radiation is converted to thermal energy. A heat engine/generator assembly then converts the thermal energy captured by the receiver to electricity. Developmental activity has been concentrated on small power modules which employ 11- to 12-meter diameter dishes to generate nominal power levels of approximately 20 kWe. A comparison of advanced heat engines for the dish power module is presented in terms of the performance potential of each engine with its requirements for advanced technology development. Three advanced engine possibilities are the Brayton (gas turbine), Brayton/Rankine combined cycle, and Stirling engines.

Fujita, T.↗

Collector temperature effects on the performance of advanced thermionic converters and nuclear electric propulsion systems

The specific weight of a thermionic nuclear electric propulsion (NEP) system depends on the collector temperature because of changes in power density, efficiency and the temperature of heat rejection. Increasing the collector temperature above the value for maximum converter performance decreases both the efficiency and the power density of the converters, but the specific weight of the total system is decreased because of the reduction in radiator weight due to the increased heat rejection temperature. The effect of collector temperature on the performance of thermionic converters was investigated. The behavior of conventional ignited mode converters as well as advanced converters with lower collector work functions; the specific mass of an 'uninsulated' NEP system design was then evaluated as a function of collector temperature. The uninsulated design uses the electrical resistance of the heat pipes between the converters and the reactor to provide electrical insolation, eliminating the need for ceramic insulators at emitter temperature and providing other design advantages. The results indicate that an optimum collector temperature, which minimizes system weight, exists at a temperature above the optimum temperature for converter performance.

Dick, R. S.↗

SOLARES orbiting mirror system

Hardware characteristics and applications opportunities of large orbital mirrors, as determined to date by NASA's 'SOLARES' program are assessed. Assuming Space Shuttle availability, methods and timetables for the deployment of these thin film-covered structures are presented and comparisons are made between electricity-production values of terrestrial solar-energy systems to which SOLARES units deliver high-intensity insolation, on one hand, and on the other the various conventional generation systems. Electrolytic and photochemical production of gaseous and liquid fuels is also compared to synthetic hydrocarbon fuels derived from fossil sources, with considerable attention to project economics and overall process efficiencies.

Billman, K.↗

Temperature Controller for a Solar Furnace

Relatively-simple movable sheild has been suggested for controlling temperature of solar furnace. Temperature modulator can be set to have collected solar energy fully "on", fully "off" or any intermediate level. Parabolic mirror concentrates Sunlight into receiver. Shade plate that blocks insolation at back of receiver produces shade zone in center of collector. No radiation is returned to receiver from shade zone; only rays falling on other areas of reflecting surface are directed back toward receiver.

Hale, R. R.↗

Validation of the solar heating and cooling high speed performance (HISPER) computer code

Developed to give a quick and accurate predictions HISPER, a simplification of the TRNSYS program, achieves its computational speed by not simulating detailed system operations or performing detailed load computations. In order to validate the HISPER computer for air systems the simulation was compared to the actual performance of an operational test site. Solar insolation, ambient temperature, water usage rate, and water main temperatures from the data tapes for an office building in Huntsville, Alabama were used as input. The HISPER program was found to predict the heating loads and solar fraction of the loads with errors of less than ten percent. Good correlation was found on both a seasonal basis and a monthly basis. Several parameters (such as infiltration rate and the outside ambient temperature above which heating is not required) were found to require careful selection for accurate simulation.

Wallace, D. B.↗

Storage requirement definition study

A dish Stirling solar receiver (DSSR) and a heat pipe solar receiver with TES (HPSR) for a 25 kWe dish Stirling solar power system are described. The thermal performance and cost effectiveness of each are analyzed minute by minute over the equivalent of one year of solar insolation. Existing designs of these two systems were used as a basis for the study; TES concepts for the DSSR and alternative TES concepts for the HPSR are presented. Parametric performance and cost studies were performed to determine the operating and cost characteristics of these systems. Data are reported for systems (1) without TES and with varying amounts of TES, (2) with and without a fossil fuel combustor, (3) with varying solar to fossil power input, and (4) with different system control assumptions. The principal effects of TES duration, collector area, engine efficiency, and fuel cost sensitivity are indicated. Development needs for each of the systems are discussed and the need and nature of possible future TES solar modular experiments are presented and discussed.

Stacy, L. E.↗

Review of stand-alone photovoltaic application projects sponsored by US DOE and US AID

Experience with dc photovoltaic systems (without backup power) and ranging in output from 23 to 3,500 peak watts, in a wide range of environmental conditions and with a wide range of insolation, is described. Cooperation of NASA with other government agencies resulted in the installation of an air pollution monitor in New Jersey, a seismic sensor in Hawaii, power for lookout towers in national forests in California, an electric power system for a Papago Indian village in Arizona, and a power system for a grain mill and water pump in Tangaye, Upper Volta. Significant operational results are discussed and system reliability is assessed for the 20 experimental systems installed since 1976. Additional systems to be installed overseas are highlighted, and economic factors are considered.

Bifano, W. J.↗

A note on solar elevation dependence of clear sky snow albedo

Recent attempts to match shortwave albedo of snow for clear skies using approximate spectral solar fluxes and solutions of the radiative transfer equation for snow were unsuccessful until a separate surface reflection term was introduced. A separate consideration of specular reflection from surface snow grains has been objected to as being ad hoc. Results based on a new parameterization of shortwave radiation are discussed. Compared to the previous radiation models, new model gives higher diffuse insolation and predicts higher albedos. The difference between observed and predicted albedos is substantially reduced without invoking surface reflection.

Choudhury, B. J.↗

Solar energy system economic evaluation: Contemporary Newman, Georgia

An economic evaluation of performance of the solar energy system (based on life cycle costs versus energy savings) for five cities considered to be representative of a broad range of environmental and economic conditions in the United States is discussed. The considered life cycle costs are: hardware, installation, maintenance, and operating costs for the solar unique components of the total system. The total system takes into consideration long term average environmental conditions, loads, fuel costs, and other economic factors applicable in each of five cities. Selection criteria are based on availability of long term weather data, heating degree days, cold water supply temperature, solar insolation, utility rates, market potential, and type of solar system.

Source record↗

Solar energy system economic evaluation for Solaron Akron, Akron, Ohio

The economic analysis of the solar energy system that was installed at Akron, Ohio is developed for this and four other sites typical of a wide range of environmental and economic conditions. The analysis is accomplished based on the technical and economic models in the f chart design procedure with inputs based on the characteristics of the installed parameters of present worth of system cost over a projected twenty year life: life cycle savings, year of positive savings and year of payback for the optimized solar energy system at each of the analysis sites. The sensitivity of the economic evaluation to uncertainties in constituent system and economic variables is also investigated. Results show that only in Albuquerque, New Mexico, where insolation is 1828 Btu/sq ft/day and the conventional energy cost is high, is this solar energy system marginally profitable.

Source record↗

Goals of thermionic program for space power

The thermionic and Brayton reactor concepts were compared for application to space power. For a turbine inlet temperature of 15000 K the Brayton powerplant weighted 5 to 40% less than the thermionic concept. The out of core concept separates the thermionic converters from their reactor. Technical risks are diminished by: (1) moving the insolator out of the reactor; (2) allowing a higher thermal flux for the thermionic converters than is required of the reactor fuel; and (3) eliminating fuel swelling's threat against lifetime of the thermionic converters. Overall performance can be improved by including power processing in system optimization for design and technology on more efficient, higher temperature power processors. The thermionic reactors will be larger than those for competitive systems with higher conversion efficiency and lower reactor operating temperatures. It is concluded that although the effect of reactor size on shield weight will be modest for unmanned spacecraft, the penalty in shield weight will be large for manned or man-tended spacecraft.

English, R. E.↗

USAF solar thermal applications overview

Process heat applications were compared to solar thermal technologies. The generic process heat applications were analyzed for solar thermal technology utilization, using SERI's PROSYS/ECONOMAT model in an end use matching analysis and a separate analysis was made for solar ponds. Solar technologies appear attractive in a large number of applications. Low temperature applications at sites with high insolation and high fuel costs were found to be most attractive. No one solar thermal technology emerges as a clearly universal or preferred technology, however,, solar ponds offer a potential high payoff in a few, selected applications. It was shown that troughs and flat plate systems are cost effective in a large number of applications.

Hauger, J. S.↗

The 1-kW solar Stirling experiment

The objective of this experiment was to demonstrate electrical power generation using a small free-piston Stirling engine and linear alternator in conjunction with a parabolic solar collector. A test bed collector, formerly used at the JPL Table Mountain Observatory, was renovated and used to obtain practical experience and to determine test receiver performance. The collector was mounted on a two-axis tracker, with a cold water calorimeter mounted on the collector to measure its efficiency, while a separate, independently tracking radiometer was used to measure solar insolation. The solar receiver was designed to absorb energy from the collector, then transfer the resulting thermal energy to the Stirling engine. Successful testing of receiver/collector assembly yielded valuable inputs for design of the Stirling engine heater head.

Giandomenico, A.↗

Non-heat pipe receiver/p-40 Stirling engine

The technology for a full-up hybrid dish-Stirling Solar Thermal Power system is discussed. Overall solar-to-electric efficiency for the dish-Stirling system demonstration is approximately 30%. Hybrid operation is provided by fossil fuel combustion augmentation, which enables the Stirling engine to operate continuously at constant speed and power, regardless of insolation level, thus providing the capability to operate on cloudy days and at night.

Haglund, R. A.↗

Infrared observations of the Saturnian system from Voyager 1

Atmospheric chemistry analyses of Saturn based on Voyager 1 infrared spectral and radiometric data are presented, including characteristics of the planet's rings and of Titan and other satellites. Infrared spectra of Saturn indicate the presence of H2, CH4, NH3, PH3, C2H2, and C2H6, with the possibility of C3H4 and C3H8. The atmospheric thermal structure of the planet shows hemispheric asymmetries that are consistent with seasonally varying insolation response, with an extensive small-scale latitudinal structure. Atmospheric chemistries of Titan, and optical and thermal characteristics for the rings of Saturn, are also given.

Hanel, R.↗

The albedo of snow for partially cloudy skies

The albedo of snow is defined as the ratio of reflected to incident solar energy, and it is an important parameter in the earth's radiation budget analysis and in the study of snowpack's thermal conditions. An approximate model for calculating the incident spectral flux for partially cloudy skies is presented. The input parameters for the calculation are atmospheric precipitable water, turbidity, ozone content, surface pressure, the optical thickness of clouds, and the grain size of snow crystals. The spectral snow reflectance model considers both specular surface reflection and volumetric multiple scattering. The surface reflection is calculated by using a crystal-shape-dependent bidirectional reflectance distribution function; the volumetric multiple scattering is calculated by using a crystal-size-dependent approximate solution in the radiative transfer equation. The model yields spectral and integrated solar flux and snow reflectance as a function of solar elevation and fractional cloud-cover. The illustrative insolation and albedo values were obtained from spectral reflectance and incident flux for representative parameters of Antarctic coastal regions. A simple relationship between grain size and the overcast albedo was obtained. For a set of grain size and shape, the albedo as a function of solar elevation and fractional cloud cover was tabulated.

Choudhury, B. J.↗