Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inorganic Crystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Product-specific kinetics reveal effect of epoxy crystallization on thermoset thermal degradation

Crystallization is a common problem for epoxy resins, which are ubiquitous in industrial and commercial use. Integration of crystallized epoxy monomers into cured thermosets has been shown to alter the thermosets’ final mechanical properties. However, no studies have investigated the impact of these crystals on the thermal stability of the thermoset. Here we investigate the degradation kinetics of a bisphenol F–based epoxy thermoset with and without crystallized monomers using Product-Specific Kinetic (PSK) analysis coupled with Evolved Gas Analysis-Mass Spectrometry (EGA-MS). PSK analysis revealed significant differences in evolved product ion kinetics, suggesting changes in the degradation kinetics between thermoset configurations. Further, it was concluded that early stages of degradation are influenced most by crystal presence due to the high concentration of unreacted epoxy monomers and lower cross-linking density of the cured network. After post-cure annealing, significant changes are observed in the degradation kinetics of thermosets without crystal inclusions. Conversely, post-cure annealing procedures of crystal integrated thermosets showed little change in the thermoset degradation kinetics across all conversion extents. These findings suggest that post-cure annealing of thermosets with crystals present at the onset does not alter the cross-linking density of the polymer network enough to significantly change the degradation kinetics. We hypothesize this is because the excess monomers from the melted crystals are unable to find suitable reaction sites for complete binding into the polymer network, which has direct implications for the material properties and final thermal stability of the thermoset.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Impact of Solution Chemistry on Growth and Structural Features of Mo-Substituted Spinel Iron Oxides

The effect of crystallizing solution chemistry on the chemistry of subsequently as-grown materials was investigated for Mo-substituted iron oxides prepared by thermally activated co-precipitation. In the presence of Mo ions, we find that varying the oxidation state of the iron precursor from Fe(II) to Fe(III) causes a progressive loss of atomic long-range order with the stabilization of 2-4 nm particles for the sample prepared with Fe(III). The oxidation state of the Fe precursor also affects the distribution of Fe and Mo cations within the spinel structure. Increasing the Fe precursor oxidation state gives decreased Fe-ion occupation and increased Mo-ion occupation of tetrahedral sites, as revealed by the extended X-ray absorption fine structure. The stabilization of Mo within tetrahedral sites appears to be unexpected, considering the octahedral preferred coordination number of Mo(VI). The analysis of the atomic structure of the sample prepared with Fe(III) indicates a local ordering of vacancies and that the occupation of tetrahedral sites by Mo induces a contraction of the interatomic distances within the polyhedra as compared to Fe atoms. Moreover, the occupancy of Mo into the thermodynamic site preference of a Mo dopant in Fe 2 O 3 assessed by density functional theory calculations points to a stronger preference for Mo substitution at octahedral sites. Hence, we suggest that the synthetized compound is thermodynamically metastable, that is, kinetically trapped. Such a state is suggested to be a consequence of the tetrahedral site occupation by Mo ions. The population of these sites, known to be reactive sites enabling particle growth, is concomitant with the stabilization of very small particles. Furthermore, we confirmed our hypothesis by using a blank experiment without Mo ions, further supporting the impact of tetrahedral Mo ions on the growth of iron oxide nanoparticles. Our findings provide new insights into the relationships between the Fechemistry of the crystallizing solution and the structural features of the as-grown Mo-substituted Fe-oxide materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Lone Pair Rotational Dynamics in Solids

Traditional classifications of crystalline phases focus on nuclear degrees of freedom. Through examination of both electronic and nuclear structure, we introduce the concept of an electronic plastic crystal. Such a material is classified by crystalline nuclear structure, while localized electronic degrees of freedom — here lone pairs — exhibit orientational motion at finite temperatures. This orientational motion is an emergent phenomenon arising from the coupling between electronic structure and polarization fluctuations generated by collective motions, such as phonons. Using ab initio molecular dynamics simulations, we predict the existence of electronic plastic crystal motion in halogen crystals and halide perovskites, and suggest that such motion may be found in a broad range of solids with lone pair electrons. Finally, such fluctuations in the charge density should be observable, in principle via synchrotron scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Crystallization-induced emission enhancement of alkyl chain-dependent pyrene-based luminogens: Visual detection of nitro-explosives

In view of the widespread applications and urgent need for efficient blue emitting materials, the synthesis of such materials has seen renewed interest. In the present work, three alkyl chain-dependent blue emitting pyrene-based luminogens were synthesized and characterized. Here, the experimental results show that these luminogens exhibited high photoluminescence efficiency both in solution (>86%) and in the solid state (>35%). Interestingly, 1,3,6,8-tetrakis (pentylphenyl)pyrene (TPPy), as a photoelectric functional material, was endowed with higher quantum yield (72%) and competitiveness due to a remarkable crystallization-induced emission enhancement (CIEE) property. More importantly, TPPy exhibits high sensitivity and selectivity for ortho-nitroaniline (o-NA) with low limit of detection (9.99 × 10 -8 M), which is mainly due to the distinctive odd-even effects of the terminal alkyl chain. The results demonstrate that this type of luminogen can potentially be utilized for practical applications in the field of contaminant or explosive detection as a sensitive and portable fluorimeter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Iron-Catalyzed Cross-[2 + 2] Cycloaddition of Butadiene and α,ω-Dienes for Ductile and Chemically Recyclable Poly(oligocyclobutanes)

Poly(divinyloligocyclobutanes) (pDVOCBs) are a distinct class of butadiene-derived, chemically recyclable polyolefins prepared from iron-catalyzed [2 + 2] cycloaddition followed by ruthenium-catalyzed ADMET polymerization. These polymers are highly crystalline, with high melting temperatures and unique rotator phases. The high degree of crystallinity in these materials not only leads to high stiffness over a broad temperature range but also results in brittle failure for polymers of modest molecular weights. Iron-catalyzed cross-[2 + 2] cycloaddition of butadiene and α,ω-dienes was accomplished, where the number of methylene units between the four-membered rings was systematically varied. Subsequent ADMET polymerization of the resulting telechelic oligomers provided a new class of chemically recyclable polyolefins that exhibit distinct thermomechanical properties. Specifically, methylene units induce changes in crystallinity that, in combination with the increased molecular weight, favored the formation of stable necks upon tensile deformation, with ∼10× enhanced ductility and improved toughness compared to pDVOCB. Through combined experimental and computational studies, the effects of methylene spacers on the crystal-to-rotator transition of the cyclobutane polymers were established. Ultimately, these methylene-modified cyclobutane polymers expand the range of properties and potential applications of this class of recyclable polyolefins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

XFEL Microcrystallography of Self-Assembling Silver n -Alkanethiolates

New synthetic hybrid materials and their increasing complexity have placed growing demands on crystal growth for single-crystal X-ray diffraction analysis. Unfortunately, not all chemical systems are conducive to the isolation of single crystals for traditional characterization. Here, small-molecule serial femtosecond crystallography (smSFX) at atomic resolution (0.833 Å) is employed to characterize microcrystalline silver n-alkanethiolates with various alkyl chain lengths at X-ray free electron laser facilities, resolving long-standing controversies regarding the atomic connectivity and odd–even effects of layer stacking. smSFX provides high-quality crystal structures directly from the powder of the true unknowns, a capability that is particularly useful for systems having notoriously small or defective crystals. We present crystal structures of silver n-butanethiolate (C4), silver n-hexanethiolate (C6), and silver n-nonanethiolate (C9). We show that an odd–even effect originates from the orientation of the terminal methyl group and its role in packing efficiency. We also propose a secondary odd–even effect involving multiple mosaic blocks in the crystals containing even-numbered chains, identified by selected-area electron diffraction measurements. Finally, we conclude with a discussion of the merits of the synthetic preparation for the preparation of microdiffraction specimens and compare the long-range order in these crystals to that of self-assembled monolayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Stacking Fault Induced Symmetry Breaking in van der Waals Nanowires

While traditional ferroelectrics are based on polar crystals in bulk or thin film form, two-dimensional and layered materials can support mechanisms for symmetry breaking between centrosymmetric building blocks, e.g., by creating low-symmetry interfaces in van der Waals stacks. Here, we introduce an approach toward symmetry breaking in van der Waals crystals that relies on the spontaneous incorporation of stacking faults in a nonpolar bulk layer sequence. The concept is realized in nanowires consisting of Se-rich group IV monochalcogenide (GeSe 1–x S x ) alloys, obtained by vapor–liquid–solid growth. The single crystalline wires adopt a layered structure in which the nonpolar A-B bulk stacking along the nanowire axis is interrupted by single-layer stacking faults with local A-A' stacking. Density functional theory explains this behavior by a reduced stacking fault formation energy in GeSe (or Se-rich GeSe 1–x S x alloys). Computations demonstrate that, similar to monochalcogenide monolayers, the inserted A-layers should show a spontaneous electric polarization with a switching barrier consistent with a Curie temperature above room temperature. Second-harmonic generation signals are consistent with a variable density of stacking faults along the wires. Here, our results point to possible routes for designing ferroelectrics via the layer stacking in van der Waals crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hints of Growth Mechanism Left in Supercrystals

Supercrystals of DNA-functionalized nanoparticles arevisualizedin three dimensions using X-ray ptychographic tomography, and theirreciprocal spaces are mapped with small-angle X-ray scattering inorder to better understand their internal defect structures. X-rayptychographic tomography reveals various types of defects in an assemblythat otherwise exhibits a single crystalline diffraction pattern.On average, supercrystals composed of smaller nanoparticles are smallerin size than supercrystals composed of larger particles. Additionally,supercrystals composed of small nanoparticles are typically aggregatedinto larger "necklace-like" structures. Within theselarger structures, some but not all pairs of connected domains arecoherent in their relative orientations. In contrast, supercrystalscomposed of larger nanoparticles with longer DNA ligands typicallyform faceted crystals. The combination of these two complementaryX-ray techniques reveals that the crystalline assemblies grow by aggregationof smaller assemblies followed by rearrangement of nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis of Single Crystal Li 2 NpO 4 and Li 4 NpO 5 from Aqueous Lithium Hydroxide Solutions under Mild Hydrothermal Conditions

The ternary oxides, Li 2 NpO 4 and Li 4 NpO 5 , were synthesized under mild hydrothermal conditions using concentrated LiOH solutions containing NpO 2 (NO 3 )( 2 ). The reactions resulted in the formation of single crystals of both compounds, enabling the determination of their single crystal structures for the first time. Further, exploration of the synthetic phase space demonstrates that the resulting neptunate phases are dependent on the concentration of LiOH, transitioning from Li 2 NpO 4 , containing a typical octahedral neptunyl geometry with two shorter Np≡O bonds, at lower LiOH concentrations to Li 4 NpO 5 with two long and four short Np-O bonds under saturated solution conditions. Reactions exploring the same synthetic conditions are also reported for uranyl(VI) for comparison. Raman spectra of the compounds were collected and analyzed to evaluate the Np-O bonding in these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

From Three-Dimensional Clathrates to Two-Dimensional Zintl Phases AMSb 2 (A = Rb, Cs; M = Ga, In) Composed of Pentagonal M–Sb Rings

Three new antimonide Zintl phases, RbGaSb 2 , CsGaSb 2 , and CsInSb 2 , were discovered during exploration of corresponding A–M–Sb (A = Rb, Cs; M = Ga, In) ternary systems while searching for new clathrates. The AGaSb 2 phases crystallize in the tetragonal space group P4 2 /nmc (No. 137) in the LiBS 2 structure type, while CsInSb 2 crystallizes in lower symmetry in the orthorhombic space group Cmce (No. 64) in the KGaSb 2 structure type with additional disorder of one of the Cs sites. The crystal structures of all three reported AMSb 2 compounds are composed of two-dimensional [MSb 2 ] – tetrahedral layers separated by Rb + or Cs + cations. [MSb 2 ] – layers are built from fused M–Sb pentagons and hexagons, which are also the main structural units for A 8 M 27 Sb 19 clathrate cages. The semiconductor nature of AMSb 2 was suggested by band structure calculations and confirmed by transport property characterization. CsGaSb 2 is a rare example of an n-type pnictide Zintl phase. Finally, all reported compounds exhibit low thermal conductivity typical for complex antimonides of heavy elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ionic Conductivity Enhancement of Polymer Electrolytes by Directed Crystallization

Here, we report that hot stretching of poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) can lead to a preferred orientation of PEO crystalline lamellae, thereby reducing the tortuosity of the ion-conduction pathway along the thickness direction of the SPE film, causing improved ionic conductivity. The hot stretching method is implemented by stretching SPE films above the melting point of PEO in an inert environment followed by crystallization at room temperature while maintaining the applied strain. The effect of hot stretching on the crystalline orientation, crystallinity, morphology, and ion transport in PEO with two types of salts, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium triflate (LiCF3SO3), is investigated in detail. Wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS) show that the orientation of PEO crystalline lamellae induces the formation of a short ion-conduction pathway along the through-plane direction of the SPE films, leading to 1.4- to 3.5-fold enhancement in the through-plane ionic conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Psilocybin: crystal structure solutions enable phase analysis of prior art and recently patented examples

Psilocybin {systematic name: 3-[2-(dimethylamino)ethyl]-1 H -indol-4-yl dihydrogen phosphate} is a zwitterionic tryptamine natural product found in numerous species of fungi known for their psychoactive properties. Following its structural elucidation and chemical synthesis in 1959, purified synthetic psilocybin has been evaluated in clinical trials and has shown promise in the treatment of various mental health disorders. In a recent process-scale crystallization investigation, three crystalline forms of psilocybin were repeatedly observed: Hydrate A, Polymorph A, and Polymorph B. The crystal structure for Hydrate A was solved previously by single-crystal X-ray diffraction. This article presents new crystal structure solutions for the two anhydrates, Polymorphs A and B, based on Rietveld refinement using laboratory and synchrotron X-ray diffraction data, and density functional theory (DFT) calculations. Utilizing the three solved structures, an investigation was conducted via Rietveld method (RM) based quantitative phase analysis (QPA) to estimate the contribution of the three different forms in powder X-ray diffraction (PXRD) patterns provided by different sources of bulk psilocybin produced between 1963 and 2021. Over the last 57 years, each of these samples quantitatively reflect one or more of the hydrate and anhydrate polymorphs. In addition to quantitatively evaluating the composition of each sample, this article evaluates correlations between the crystal forms present, corresponding process methods, sample age, and storage conditions. Furthermore, revision is recommended on characterizations in recently granted patents that include descriptions of crystalline psilocybin inappropriately reported as a single-phase `isostructural variant.' Rietveld refinement demonstrated that the claimed material was composed of approximately 81% Polymorph A and 19% Polymorph B, both of which have been identified in historical samples. In this article, we show conclusively that all published data can be explained in terms of three well-defined forms of psilocybin and that no additional forms are needed to explain the diffraction patterns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Near Quantitative Removal of Selenate and Sulfate Anions from Wastewaters by Cocrystallization with Chelating Hydrogen-Bonding Guanidinium Ligands

Selenium (Se) has become an environmental contaminant of aquatic ecosystems as a result of human activities, particularly mining, fossil fuel combustion, and agricultural activities. By leveraging the high sulfate concentrations relative to Se oxyanions (i.e., SeO n 2– , n = 3, 4) present in some wastewaters, we have developed an efficient approach to Se-oxyanion removal by cocrystallization with bisiminoguanidinium (BIG) ligands that form crystalline sulfate/selenate solid solutions. The crystallization of the sulfate, selenate and selenite, oxyanions and of sulfate/selenate mixtures with five candidate BIG ligands are reported along with the thermodynamics of crystallization and aqueous solubilities. Oxyanion removal experiments with the top two performing candidate ligands show a near quantitative removal (>99%) of sulfate or selenate from solution. When both sulfate and selenate are present, there is near quantitative removal (>99%) of selenate, down to sub-ppb Se levels, with no discrimination between the two oxyanions during cocrystallization. Reducing the selenate concentrations by 3 orders of magnitude or more relative to sulfate, as found in many wastewaters, led to no measurable loss in Se removal efficiencies. This work offers a simple and effective alternative to selective separation of trace amounts of highly toxic selenate oxyanions from wastewaters, to meet stringent regulatory discharge limits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Assessing the source of error in the Thomas–Fermi–von Weizsäcker density functional

We investigate the source of error in the Thomas–Fermi–von Weizsäcker (TFW) density functional relative to Kohn–Sham density functional theory (DFT). In particular, through numerical studies on a range of materials, for a variety of crystal structures subject to strain and atomic displacements, we find that while the ground state electron density in TFW orbital-free DFT is close to the Kohn–Sham density, the corresponding energy deviates significantly from the Kohn–Sham value. Here, we show that these differences are a consequence of the poor representation of the linear response within the TFW approximation for the electronic kinetic energy, confirming conjectures in the literature. In so doing, we find that the energy computed from a non-self-consistent Kohn–Sham calculation using the TFW electronic ground state density is in very good agreement with that obtained from the fully self-consistent Kohn–Sham solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Neptunyl Pyrrophen Complexes: Exploring Schiff Base Chemistry with Multidentate Acyclic Ligands and Transuranics

Here we report the synthesis, structure, and characterization of two novel neptunyl complexes (NpO 2 L1 and NpO 2 L2) constructed from phenylene-substituted benzyl ester bis(pyrrole)phenylenediamine (named “pyrrophen”) ligands. In both cases, the neptunium center exists in the +6 oxidation state,. As our specific interest is in exploring the chemistry of neptunium compounds containing the linear neptunyl ion (NpO 2 2+ ) through equatorially coordinating the metal by multidentate organic ligands, we have identified the differences that are likely to cause discrepancy between the two complexes by examining the ions and their coordinative environments through single-crystal X-ray crystallography, diffuse reflectance, and Raman spectroscopy. This is the first time pyrrophen has been utilized in Np chemistry and demonstrates a new platform to study 5 f electron participation and coordination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Ba 6 Cu 31 Te 22 ( A = K, Rb, Cs) Featuring Polyanionic Copper–Telluride Frameworks with Ultralow Thermal Conductivity

In this study, hree polyanionic tellurides, ABa 6 Cu 31 Te 22 (A = K, Rb, Cs), were synthesized in salt flux. The isostructural tellurides crystallize in a new structure type, in the cubic Pa$\overline{3}$ space group with a Wyckoff sequence of d 10 c 2 b 1 and large unit cell volumes of over 5500 Å 3 . The structures feature a framework of [CuTe 4 ] tetrahedra and [CuTe 3 ] trigonal pyramids with disorder in the Cu sites. The polyanionic frameworks have large square antiprism and cuboctahedral voids where Ba and alkali metal cations are situated, forming [BaTe 8 ] and [ATe 12 ], respectively. The overall compositions are close to being charge balanced. The large [ATe 12 ] cuboctahedra allowed for significant anisotropic displacement of the A cations, as observed from both single crystal X-ray diffraction and heat capacity studies. Alkali cations rattling together with Cu atom displacement and disorder leads to the dispersion of phonons, thus softening the lattice and subsequently reducing the thermal conductivity. Evaluations of the electronic band structure revealed the occurrence of a narrow bandgap together with the presence of a flat band near the valence band maximum, giving rise to the high thermopower. The Cs and Rb analogues show a slope change in the temperature dependence of electrical resistivity around room temperature, which is typical for semimetals or degenerate semiconductors. For the as-synthesized and unoptimized materials, high values of the thermoelectric figure-of-merit of ~0.2 were observed at 623 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Transport and optical properties of the chiral semiconductor Ag 3 AuSe 2

Previous band structure calculations predicted Ag 3 AuSe 2 to be a semiconductor with a band gap of approximately 1 eV. Here, we report single crystal growth of Ag 3 AuSe 2 and its transport and optical properties. Single crystals of Ag 3 AuSe 2 were synthesized by slow-cooling from the melt, and grain sizes were confirmed to be greater than 2 mm using electron backscatter diffraction. Optical and transport measurements reveal that Ag 3 AuSe 2 is a highly resistive semiconductor with a band gap and activation energy around 0.3 eV. Our first-principles calculations show that the experimentally determined band gap lies between the predicted band gaps from GGA and hybrid functionals. We predict band inversion to be possible by applying tensile strain. The sensitivity of the gap to Ag/Au ordering, chemical substitution, and heat treatment merit further investigation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗