Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inverse model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Methane emissions from dairies in the Los Angeles Basin

We estimate the amount of methane (CH 4 ) emitted by the largest dairies in the southern California region by combining measurements from four mobile solar-viewing ground-based spectrometers (EM27/SUN), in situ isotopic 13/12 CH 4 measurements from a CRDS analyzer (Picarro), and a high-resolution atmospheric transport simulation with a Weather Research and Forecasting model in large-eddy simulation mode (WRF-LES). The remote sensing spectrometers measure the total column-averaged dry-air mole fractions of CH 4 and CO 2 (X CH 4 and X CO 2 ) in the near infrared region, providing information on total emissions of the dairies at Chino. Differences measured between the four EM27/SUN ranged from 0.2 to 22ppb (part per billion) and from 0.7 to 3ppm (part per million) for X CH 4 and X CO 2 , respectively. To assess the fluxes of the dairies, these differential measurements are used in conjunction with the local atmospheric dynamics from wind measurements at two local airports and from the WRF-LES simulations at 111m resolution. Our top-down CH 4 emissions derived using the Fourier transform spectrometers (FTS) observations of 1.4 to 4.8ppts -1 are in the low end of previous top-down estimates, consistent with reductions of the dairy farms and urbanization in the domain. However, the wide range of inferred fluxes points to the challenges posed by the heterogeneity of the sources and meteorology. Inverse modeling from WRF-LES is utilized to resolve the spatial distribution of CH 4 emissions in the domain. Both the model and the measurements indicate heterogeneous emissions, with contributions from anthropogenic and biogenic sources at Chino. A Bayesian inversion and a Monte Carlo approach are used to provide the CH 4 emissions of 2.2 to 3.5ppts -1 at Chino.

54 ENVIRONMENTAL SCIENCES↗

Variability in Surface BRDF at Different Spatial Scales (30 m-500 m) Over a Mixed Agricultural Landscape as Retrieved from Airborne and Satellite Spectral Measurements

Over the past decade, the role of multiangle remote sensing has been central to the development of algorithms for the retrieval of global land surface properties including models of the bidirectional reflectance distribution function (BRDF), albedo, land cover/dynamics, burned area extent, as well as other key surface biophysical quantities represented by the anisotropic reflectance characteristics of vegetation. In this study, a new retrieval strategy for fine-to-moderate resolution multiangle observations was developed, based on the operational sequence used to retrieve the Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 5 reflectance and BRDF/albedo products. The algorithm makes use of a semiempirical kernel-driven bidirectional reflectance model to provide estimates of intrinsic albedo (i.e., directional-hemispherical reflectance and bihemispherical reflectance), model parameters describing the BRDF, and extensive quality assurance information. The new retrieval strategy was applied to NASA's Cloud Absorption Radiometer (CAR) data acquired during the 2007 Cloud and Land Surface Interaction Campaign (CLASIC) over the well-instrumented Atmospheric Radiation Measurement Program (ARM) Southern Great Plains (SGP) Cloud and Radiation Testbed (CART) site in Oklahoma, USA. For the case analyzed, we obtained approx.1.6 million individual surface bidirectional reflectance factor (BRF) retrievals, from nadir to 75 off-nadir, and at spatial resolutions ranging from 3 m - 500 m. This unique dataset was used to examine the interaction of the spatial and angular characteristics of a mixed agricultural landscape; and provided the basis for detailed assessments of: (1) the use of a priori knowledge in kernel-driven BRDF model inversions; (2) the interaction between surface reflectance anisotropy and instrument spatial resolution; and (3) the uncertain ties that arise when sub-pixel differences in the BRDF are aggregated to a moderate resolution satellite pixel. Results offer empirical evidence concerning the influence of scale and spatial heterogeneity in kernel-driven BRDF models; providing potential new insights into the behavior and characteristics of different surface radiative properties related to land/use cover change and vegetation structure.

Roman, Miguel O.↗

UQpy: A general purpose Python package and development environment for uncertainty quantification

In this paper, we present the UQpy software toolbox, an open-source Python package for general uncertainty quantification (UQ) in mathematical and physical systems. The software serves as both a user-ready toolbox that includes many of the latest methods for UQ in computational modeling and a convenient development environment for Python programmers advancing the field of UQ. The paper presents an introduction to the software's architecture and existing capabilities, divided in the code in a set of modules centered around different UQ tasks such as sampling methods, generation of random processes and random fields, probabilistic inverse modeling, reliability analysis, surrogate modeling, and active learning. The paper also highlights the importance of the RunModel module, which is used to drive simulations in the uncertainty analyses performed in UQpy. This module conveniently allows the user to define computational models directly in Python, or to run simulations from a third-party software in serial or in parallel. To illustrate the various capabilities, two examples are tracked throughout the paper and analyzed repeatedly for various UQ tasks. The first is a Python model solving a nonlinear structural dynamics problem, used to illustrate UQpy's capabilities in sampling and forward propagation of high dimensional random vectors (stochastic processes), and probabilistic inference. The second model is a third-party Abaqus finite element model solving the thermomechanical response of a beam structure. This example is used to illustrate UQpy's capabilities in variance reduction sampling techniques, reliability analysis, surrogate modeling and active learning techniques.

97 MATHEMATICS AND COMPUTING↗

Pillars of the Mantle: Imaging the Interior of the Earth with Adjoint Tomography. In: PEARC17 Proceedings of the Practice and Experience in Advanced Research Computing 2017 on Sustainability, Success and Impact, Article No. 75

In this work, we investigate global seismic tomographic models obtained by spectral-element simulations of seismic wave propagation and adjoint methods. Global crustal and mantle models are obtained based on an iterative conjugate-gradient type of optimization scheme. Forward and adjoint seismic wave propagation simulations, which result in synthetic seismic data to make measurements and data sensitivity kernels to compute gradient for model updates, respectively, are performed by the SPECFEM3D_GLOBE package [1] [2] at the Oak Ridge Leadership Computing Facility (OLCF) to study the structure of the Earth at unprecedented levels. Using advances in solver techniques that run on the GPUs on Titan at the OLCF, scientists are able to perform large-scale seismic inverse modeling and imaging. Using seismic data from global and regional networks from global CMT earthquakes, scientists are using SPECFEM3D_GLOBE to understand the structure of the mantle layer of the Earth. Visualization of the generated data sets provide an effective way to understand the computed wave perturbations which define the structure of mantle in the Earth.

Pugmire, David↗

On the Reliability of Parameter Inferences in a Multiscale Model for Transport in Stream Corridors

Nonreacting tracer tests capture information about physical processes in transient storage zones including the hyporheic zone (HZ). However, reliably extracting this information from breakthrough curves (BTCs) and distinguishing the effects of in-channel dispersion and transient storage are well-known challenges. Using BTCs from a nonreacting tracer test monitored at multiple locations, we explore ways for reliable parameter estimations. The identifiability of parameters is greatly influenced by the choice of forward and inverse modeling frameworks in addition to the quality of the data. Our forward model is a recently proposed multiscale model that uses subgrid transport models written in the Lagrangian form to represent transport along a diverse set of HZ pathways with a shape-free distribution of travel times. Joint distributions of HZ and channel parameters are estimated using the Markov Chain Monte Carlo technique. Numerical experiments show ambiguity between channel dispersion and HZ transport when the reach length is too short to allow significant solute-HZ interaction, the observation period is too brief to observe the tailing behavior, or the solute source is spread in time. In contrast, we obtained reliable parameter estimates by simultaneously fitting BTCs observed at different locations in the test reach using a single set of HZ parameters and section-specific channel areas and dispersion coefficients. Furthermore, this study demonstrates the estimation of travel time distributions, HZ exchange rates, and channel parameters in a new multiscale approach and offers guidance for extracting reliable parameter estimates from multiple BTCs.

54 ENVIRONMENTAL SCIENCES↗

Solving iTOUGH2 simulation and optimization problems using the PEST protocol

The PEST protocol has been implemented into the iTOUGH2 code, allowing the user to link any simulation program (with ASCII-based inputs and outputs) to iTOUGH2's sensitivity analysis, inverse modeling, and uncertainty quantification capabilities. These application models can be pre- or post-processors of the TOUGH2 non-isothermal multiphase flow and transport simulator, or programs that are unrelated to the TOUGH suite of codes. PEST-style template and instruction files are used, respectively, to pass input parameters updated by the iTOUGH2 optimization routines to the model, and to retrieve the model-calculated values that correspond to observable variables. We summarize the iTOUGH2 capabilities and demonstrate the flexibility added by the PEST protocol for the solution of a variety of simulation-optimization problems. In particular, the combination of loosely coupled and tightly integrated simulation and optimization routines provides both the flexibility and control needed to solve challenging inversion problems for the analysis of multiphase subsurface flow and transport systems.

54 ENVIRONMENTAL SCIENCES↗

Aircraft automatic digital flight control system with inversion of the model in the feed-forward path

A full-flight-envelope automatic trajectory control system concept is being investigated at Ames Research Center. This concept was developed for advanced aircraft configurations with severe nonlinear characteristics. A feature of the system is an inverse of the complete nonlinear aircraft model as part of the feed-forward control path. Simulation and flight tests have been reported at previous Digital Avionics Systems conferences. A new method for the continuous real-time inversion of the aircraft model using a Newton-Raphson trim algorithm instead of the original inverse table look-up procedure has been developed. The results of a simulation study of a vertical attitude takeoff and landing aircraft using the new inversion technique are presented. Maneuvers were successfully carried out in all directions in the vertical-attitude hover mode. Transition runs from conventional flight through the region of lift-curve-slope reversal at an angle of attack of about 32 deg and to hover at zero speed in the vertical attitude showed satisfactory transient response. Simulations were also conducted in conventional flight at high subsonic speed in steep climb and with turns up to 4 g. Successful flight tests of the system with the new model-inversion technique in a UH-1H helicopter have recently been carried out.

Smith, G. A.↗

A Medium‐Sized Paleo‐Tsunami Reconstruction by a Deep Neural Network Processing Sedimentary Deposits

Abstract Reconstructing the magnitude and recurrence time of tsunamis, one of the most destructive and unpredictable natural hazards impacting coastal communities, is essential. While major tsunamis are the most studied due to their disastrous impact, small/medium tsunamis (SMTs) are much more frequent and can still significantly impact the coast. Therefore, SMTs potentially provide an extensive archive of information preserved in the geological record. Analyzing the deposits of small/medium paleo‐tsunamis (SMPTs) opens a window into when their direct observation was unavailable. However, deposits of SMPTs are often degraded, traditional sediment deposition inversion models might fail. Recent research has shown that Deep Neural Networks (DNN) can effectively reconstruct the flow conditions of major tsunamis from their deposits. We evaluate the effectiveness of this approach in reconstructing the characteristics of a recent medium size tsunami (2006 Java) and of a medium paleo‐tsunami (1929 Grand Banks). We successfully reconstruct the flow characteristics of the 2006 Java event and show that an inversion of comparable quality is possible for the 1929 Grand Banks tsunami, despite greater uncertainties due to the deposit degradation. Our research shows that Machine Learning has the potential to unseal the meaning of data of thousands SMPTs.

Batubo, P.↗

Airborne measurements of isoprene and monoterpene emissions from southeastern U.S. forests

Isoprene and monoterpene emission rates are essential inputs for atmospheric chemistry models that simulate atmospheric oxidant and particle distributions. Process studies of the biochemical and physiological mechanisms controlling these emissions are advancing our understanding and the accuracy of model predictions but efforts to quantify regional emissions have been limited by a lack of constraints on regional distributions of ecosystem emission capacities. We used an airborne wavelet-based eddy covariance measurement technique to characterize isoprene and monoterpene fluxes with high spatial resolution during the 2013 SAS (Southeast Atmosphere Study) in the southeastern United States. The fluxes measured by direct eddy covariance were comparable to emissions independently estimated using an indirect inverse modeling approach. Isoprene emission factors based on the aircraft wavelet flux estimates for high isoprene chemotypes (e.g., oaks) were similar to the MEGAN2.1 biogenic emission model estimates for landscapes dominated by oaks. Aircraft flux measurement estimates for landscapes with fewer isoprene emitting trees (e.g., pine plantations), were about a factor of two lower than MEGAN2.1 model estimates. The tendency for high isoprene emitters in these landscapes to occur in the shaded understory, where light dependent isoprene emissions are diminished, may explain the lower than expected emissions. This result demonstrates the importance of accurately representing the vertical profile of isoprene emitting biomass in biogenic emission models. Airborne measurement-based emission factors for high monoterpene chemotypes agreed with MEGAN2.1 in landscapes dominated by pine (high monoterpene chemotype) trees but were more than a factor of three higher than model estimates for landscapes dominated by oak (relatively low monoterpene emitting) trees. This results suggests that unaccounted processes, such as floral emissions or light dependent monoterpene emissions, or vegetation other than high monoterpene emitting trees may be an important source of monoterpene emissions in those landscapes and should be identified and included in biogenic emission models.

54 ENVIRONMENTAL SCIENCES↗

The Use of Gridded Fossil Fuel CO2 Emissions (FFCO2) Inventory for Climate Mitigation Applications: Errors, Uncertainties, and Current and Future Challenges

Emission Inventory (EI) is a fundamental tool to monitor global compliance of greenhouse gases (GHGs) emissions reduction actions. Inventory guidelines provide a best practice to help EI compilers to make comparable national emission estimates, in spite of the differences in data availability across countries and regions. There are a variety of sources of errors and uncertainties, however, that originate beyond what the inventory guidelines define. For example, spatially-explicit EIs, which are a key product for atmospheric modeling applications, are often developed for research purposes, and there are no specific guidelines to disaggregate emission estimates from country scale. On top of that, EIs are fundamentally prone to systematic biases due to the simple calculation methodology and thus an objective evaluation (e.g. atmospheric top-down estimates) is needed to assure the accuracy of the estimates. ODIAC is a global high-resolution (1x1 km) fossil fuel carbon dioxide (CO2) gridded EI that is now often used in atmospheric CO2 modeling. ODIAC is based on disaggregation of national emission estimates made by CDIAC, which is the well accepted standard in the community. The ODIAC emission data product is updated on an annual basis using best available statistical data. Subnational spatial emission patterns are estimated using power plant profiles and satellite-observations of nighttime lights. In addition to the conventional CDIAC gridded data product, ODIAC carries international bunker emissions (shipping and aviation), which allows flux inversion modelers to accurately impose the global total fossil fuel emissions and their horizontal and vertical distribution. We have extensively evaluated ODIAC emissions using fine-grained EIs as well as a high-resolution atmospheric model simulation across different scales (national, subnational/regional, and urban policy relevant) with a focus on the uncertainties associated with the emission disaggregation. We have examined the use of NASA's Black Marble Suomi-NPP/VIIRS nightlight data.

Oda, Tomohiro↗

Precision Requirements for Space-based XCO2 Data

Precision requirements have been determined for the column-averaged CO2 dry air mole fraction (X(sub CO2)) data products to be delivered by the Orbiting Carbon Observatory (OCO). These requirements result from an assessment of the amplitude and spatial gradients in X(sub CO2), the relationship between X(sub CO2) precision and surface CO2 flux uncertainties calculated from inversions of the X(sub CO2) data, and the effects of X,,Z biases on CO2 flux inversions. Observing system simulation experiments and synthesis inversion modeling demonstrate that the OCO mission design and sampling strategy provide the means to achieve the X(sub CO2) precision requirements. The impact of X(sub CO2) biases on CO2 flux uncertainties depend on their spatial and temporal extent since CO2 sources and sinks are inferred from regional-scale X(sub CO2) gradients. Simulated OCO sampling of the TRACE-P CO2 fields shows the ability of X(sub CO2) data to constrain CO2 flux inversions over Asia and distinguish regional fluxes from India and China.

Miller, C. E.↗

A Suite of High-Resolution Atmospheric Carbon Dioxide Simulations in Support of the OCO-3 Snapshot Area Mapping (SAM) Mode Observation: PSU-WRF, CSU-OLAM and NASA GEOS

Cities and power plants are responsible more than 70% of GHG emissions. The emissions from the subnational localized sources need to be accurately quantified and properly managed in order to achieve the Paris Climate Agreement goals. The accurate estimation of these emission is also crucial for assessing the capacity of natural sinks to uptake the carbon released into the atmosphere that ultimately defines our emission allowance for the 1.5 or 2.0 degree temperature goals. New data collected by the Orbiting Carbon Observatory 3 (OCO-3) Snapshot Area Mapping (SAM) observations should provide a tremendous new opportunity for us to study CO2 emissions from targeted large localized sources, such as cities, power plants and beyond. Since 2018 (prior to the OCO-3 launch), we have studied the observational strategies for the SAM mode observation in order to collect the useful data for estimating CO2 emissions from target sources. To maximize the benefit of the SAM mode observation data for quantifying CO2 emission, it is important to define how to observe the localized sources depending on the local environmental and emission specificities. We employ a suite of state-of-the-art CO2 modeling systems, such as PSU's WRF-CO2, CSU's OLAM and NASA's GEOS models. All of these CO2 modeling systems are prescribedwith the high-resolution fuel CO2 emission estimates from the ODIAC data product to achieve realistic urban CO2 variations. We focus on cities with established ground-based observation networks, such as Los Angeles, Indianapolis, and Paris. We have examined the urban emission signal detectability in response to the influence of local background conditions that can observed by the SAM and biospheric contributions that will be a new challenge for urban emission inverse estimation. Based on the results of our simulation experiments, we plan to propose city-specific observation strategies. Upon the availability of the OCO-3 data, we will attempt to estimate city emissions using inverse models. We also developed synthetic OCO-3 data using NASA's GEOS5 model, which should be useful to assess the utility of the OCO-3 data in combination with data collected by carbon satellites in other orbits, such as NASA's OCO-2 and Japanese GOSAT-1/2. The synthetic data also provide an opportunity to study the errors due to clouds and aerosols, which have been not fully studied in the past.

Oda, Tomohiro↗

Estimation of a biofilm-specific reaction rate: kinetics of bacterial urea hydrolysis in a biofilm

Background/Objectives: Biofilms and specifically urea-hydrolysing biofilms are of interest to the medical community (for example, urinary tract infections), scientists and engineers (for example, microbially induced carbonate precipitation). To appropriately model these systems, biofilm-specific reaction rates are required. A simple method for determining biofilm-specific reaction rates is described and applied to a urea-hydrolysing biofilm. Methods: Biofilms were grown in small silicon tubes and influent and effluent urea concentrations were determined. Immediately after sampling, the tubes were thin sectioned to estimate the biofilm thickness profile along the length of the tube. Urea concentration and biofilm thickness data were used to construct an inverse model for the estimation of the urea hydrolysis rate. Results/Conclusions: It was found that urea hydrolysis in Escherichia coli MJK2 biofilms is well approximated by first-order kinetics between urea concentrations of 0.003 and 0.221 mol/l (0.186 and 13.3 g/l). The first-order rate coefficient ( k 1 ) was estimated to be 23.2±6.2 h -1 . It was also determined that advection dominated the experimental system rather than diffusion, and that urea hydrolysis within the biofilms was not limited by diffusive transport. Beyond the specific urea-hydrolysing biofilm discussed in this work, the method has the potential for wide application in cases where biofilm-specific rates must be determined.

59 BASIC BIOLOGICAL SCIENCES↗

Forced Component Estimation Statistical Method Intercomparison Project (ForceSMIP)

Anthropogenic climate change is unfolding rapidly, yet its regional manifestation can be obscured by internal variability. A primary goal of climate science is to identify the externally forced climate response from among the noise of internal variability. Separating the forced response from internal variability can be addressed in climate models by using a large ensemble to average over different possible realizations of internal variability. However, with only one realization of the real world, it is a major challenge to isolate the forced response directly in observations. In the Forced Component Estimation Statistical Method Intercomparison Project (ForceSMIP), contributors used existing and newly developed statistical and machine learning methods to estimate the forced response over 1950–2022 within individual realizations of the climate system. Participants used neural networks, linear inverse models, fingerprinting methods, and low-frequency component analysis, among other approaches. These methods were trained using large ensembles from multiple climate models and then applied to observations. Here, we evaluate method performance within large ensembles and investigate the estimates of the forced response in observations. Our results show that many different types of methods are skillful for estimating the forced response in climate models, though the relative skill of individual methods varies depending on the variable and evaluation metric. Methods with comparable skill in models can give a wide range of estimates of the forced response pattern in observations, illustrating the epistemic uncertainty in forced response estimates. ForceSMIP gives new insights into the forced response in observations, its uncertainty, and methods for its estimation.

Climate attribution↗

Modeling Modern Methane Emissions from Natural Wetlands: Interannual Variations 1982-1993 - 2

A global run of a process-based methane model [Walter et al., this issue] is performed using high-frequency atmospheric forcing fields from ECMWF reanalyses of the period from 1982 to 1993. We calculate global annual methane emissions to be 260 Tg/ yr. 25% of methane emissions originate from wetlands north of 30 deg. N. Only 60% of the produced methane is emitted, while the rest is re-oxidized. A comparison of zonal integrals of simulated global wetland emissions and results obtained by an inverse modeling approach shows good agreement. In a test with data from two wetlands, the seasonality of simulated and observed methane emissions agrees well. The effects of sub-grid scale variations in model parameters and input data are examined. Modeled methane emissions show high regional, seasonal and interannual variability. Seasonal cycles of methane emissions are dominated by temperature in high latitude wetlands, and by changes in the water table in tropical wetlands. Sensitivity tests show that +/- 1 C changes in temperature lead to +/- 20 % changes in methane emissions from wetlands. Uniform changes of +/- 20% in precipitation alter methane emissions by about +/- 18%. Limitations in the model are analyzed. Simulated interannual variations in methane emissions from wetlands are compared to observed atmospheric growth rate anomalies. Our model simulation results suggest that contributions from other sources than wetlands and/or the sinks are more important in the tropics than north-of 30 deg. N. In higher northern latitudes, it seems that a large part, of the observed interannual variations can be explained by variations in wetland emissions. Our results also suggest that reduced wetland emissions played an important role in the observed negative methane growth rate anomaly in 1992.

Walter, Bernadette P.↗

Potential Source Apportionment and Meteorological Conditions Involved in Airborne 131 I Detections in January/February 2017 in Europe

Traces of particulate radioactive iodine (I-131) were detected in the European atmosphere in January/February 2017. Concentrations of this nuclear fission product were very low, ranging 0.1 to 10 mu Bq m(-3) except at one location in western Russia where they reached up to several mBq m(-3). Detections have been reported continuously over an 8-week period by about 30 monitoring stations. We examine possible emission source apportionments and rank them considering their expected contribution in terms of orders of magnitude from typical routine releases: radiopharmaceutical production units > sewage sludge incinerators > nuclear power plants > spontaneous fission of uranium in soil. Inverse modeling simulations indicate that the widespread detections of I-131 resulted from the combination of multiple source releases. Among them, those from radiopharmaceutical production units remain the most likely. One of them is located in Western Russia and its estimated source term complies with authorized limits. Other existing sources related to I-131 use (medical purposes or sewage sludge incineration) can explain detections on a rather local scale. As an enhancing factor, the prevailing wintertime meteorological situations marked by strong temperature inversions led to poor dispersion conditions that resulted in higher concentrations exceeding usual detection limits in use within the informal Ring of Five (Ro5) monitoring network.

54 ENVIRONMENTAL SCIENCES↗

Quantifying Feedbacks from Abrupt Changes in High-Latitude Trace-Gas Emissions

During the three-year project period, Purdue University has specifically accomplished the following: revised the existing Methane Dynamics Model (MDM) to consider the effects of changes of atmospheric pressure; applied the methane dynamics model (MDM) to Siberian region to demonstrate that ebullition estimates could increase previous estimates of regional terrestrial CH 4 emissions 3- to 7-fold in Siberia; Conducted an analysis of the carbon balance of the Arctic Basin from 1997 to 2006 to show that terrestrial areas of the Arctic were a net source of 41.5 Tg CH 4 yr 1 that increased by 0.6 Tg CH 4 yr 1 during the decade of analysis, a magnitude that is comparable with an atmospheric inversion of CH 4 ; improved the quantification of CH 4 fluxes in the Arctic with inversion methods; evaluated AIRS CH4 retrieval data with a transport and inversion model and surface flux and aircraft data; to better quantify methane emissions from wetlands, we extended the MDM within a biogeochemistry model, the Terrestrial Ecosystem Model (TEM), to include a large-scale hydrology model, the variable infiltration capacity (VIC) model; more recently, we developed a single box atmospheric chemistry model involving atmospheric methane (CH 4 ), carbon monoxide (CO) and radical hydroxyl (OH) to analyze atmospheric CH 4 concentrations from 1984 to 2008.

54 ENVIRONMENTAL SCIENCES↗