Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Backscattering cascade of beam modes off ambient density fluctuations

The effects of a given nonthermal low-frequency density-fluctuation spectrum on the amplification of Langmuir waves by a 'bump-on-tail' beam of electrons are studied. The density-fluctuation spectrum is assumed to contain a uniform distribution of wavelengths ranging from much shorter than the beam mode wavelength to of the same order. This permits multiple large-angle (back) scattering to occur. One-dimensional numerical solutions of the kinetic equations are found which yield criteria for linear saturation of the beam instability of a cascade of backscattering to high wavenumber. The relevant time scales and spectral shapes are also determined in both the stable and unstable regions. Linear damping and Cerenkov emission by a possible nonthermal tail of electrons is taken into account. An application is made to the beam modes observed simultaneously with density fluctuations off the Jovian bow shock. It is shown that the observed level of density fluctuations is sufficient to saturate the unstable Langmuir waves, although nonthermal Landau damping may prevent a cascade to very high wavenumbers.

Russell, D. A.↗

A first-principles derivation of Doppler noise expected from solar wind density fluctuations

The level of Doppler noise (DN) expected from solar wind (SW) density fluctuations (DF) is derived beginning with the expression for refractive index variations. The calculation takes account of up and downlink paths and of the method actually used to produce the DN values. The usual assumptions that the DF are frozen in, that the large-scale radial variation can be separated from the DF, that the DF power spectrum is a power law with outer scale k sub 0 and that the DF are homogeneous on scales less than 2c delta t, delta t = sample time, are made. The result agrees quite well with previous observations of DN. Corrections for the finite number of points used in the actual algorithm are discussed.

Callahan, P. S.↗

Interplanetary radio storms. 2: Emission levels and solar wind speed in the range 0.05-0.8 AU

Storms of interplanetary type III radio bursts (IP storms) are commonly observed in the interplanetry medium by the ISEE-3 radio instrument. This instrument has the capability of accurately determining the arrival direction of the radio emission. At each observing frequency, the storm radio sources are tracked as they cross the line-of-sight to the Sun. Usng a simple model, the emission levels are determined at a number of radio frequencies for four separate storms. The IP storm radiation is found to occur in regions of enhanced density at levels of 0.05 to 0.8 AU. The density in these enhancements falls off faster than R(-2). The solar wind speed in the storm region is also measured. The analysis is consistent with steady conditions in the storm region during a few days around the central meridian passage of the storm. The comparison with average in situ density measurements compiled from the HELIOS 1-2 observations favors type III storm burst radio emission at the harmonic of the local plasma frequency.

Bougeret, J. L.↗

Interplanetary radio storms. II - Emission levels and solar wind speed in the range 0.05-0.8 AU

Storms of interplanetary type III radio bursts (IP storms) are commonly observed in the interplanetary medium by the ISEE-3 radio instrument. This instrument has the capability of accurately determining the arrival direction of the radio emission. At each observing frequency, the storm radio sources are tracked as they cross the line-of-sight to the sun. Using a simple model, the emission levels are determined at a number of radio frequencies for four separate storms. The IP storm radiation is found to occur in regions of enhanced density at levels of 0.05 to 0.8 AU. The density in these enhancements falls off faster than R(-2). The solar wind speed in the storm region is also measured. The analysis is consistent with steady conditions in the storm region during a few days around the III storm burst radio emission at the harmonic of the local plasma frequency.

Bougeret, J.-L.↗

Long–Cycling Sulfide–Based All–Solid–State Batteries Enabled by Electrochemo–Mechanically Stable Electrodes

Anode significantly determines the energy density of all-solid-state Lithium batteries (ASLBs). Silicon (Si) and Lithium (Li) metal are two of the most attractive anodes because of their ultrahigh theoretical capacities. However, most investigations focus on Li metal; the great potential of Si is underrated. This study investigates Si anode's stability, processability, and cost in ASLBs and compares them with Li metal. Moreover, the single-crystal LiNi 0.8 Co 0.1 Mn 0.1 O 2 is stabilized with a lithium silicate (Li 2 SiO x ) through a scalable sol-gel method. ASLBs with a cell-level energy density of 285 Wh kg -1 are obtained through sandwiching Si anode, thin sulfide solid-state electrolyte membrane, and interface stabilized LiNi 0.8 Co 0.1 Mn 0.1 O 2 . The full cell delivered a high capacity of 145 mAh g -1 at C/3 and maintained stability for 1000 cycles. This work inspires commercializing the ASLBs on a large scale with exciting manufacturing lines for large-scale, safe, and economical energy storage.

25 ENERGY STORAGE↗

Low interfacial trap density and sub-nm equivalent oxide thickness in In{sub 0.53}Ga{sub 0.47}As (001) metal-oxide-semiconductor devices using molecular beam deposited HfO{sub 2}/Al{sub 2}O{sub 3} as gate dielectrics

We investigated the passivation of In{sub 0.53}Ga{sub 0.47}As (001) surface by molecular beam epitaxy techniques. After growth of strained In{sub 0.53}Ga{sub 0.47}As on InP (001) substrate, HfO{sub 2}/Al{sub 2}O{sub 3} high-{kappa} oxide stacks have been deposited in-situ after surface reconstruction engineering. Excellent capacitance-voltage characteristics have been demonstrated along with low gate leakage currents. The interfacial density of states (D{sub it}) of the Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As interface have been revealed by conductance measurement, indicating a downward D{sub it} profile from the energy close to the valence band (medium 10{sup 12} cm{sup -2}eV{sup -1}) towards that close to the conduction band (10{sup 11} cm{sup -2}eV{sup -1}). The low D{sub it}'s are in good agreement with the high Fermi-level movement efficiency of greater than 80%. Moreover, excellent scalability of the HfO{sub 2} has been demonstrated as evidenced by the good dependence of capacitance oxide thickness on the HfO{sub 2} thickness (dielectric constant of HfO{sub 2}{approx}20) and the remained low D{sub it}'s due to the thin Al{sub 2}O{sub 3} passivation layer. The sample with HfO{sub 2} (3.4 nm)/Al{sub 2}O{sub 3} (1.2 nm) as the gate dielectrics has exhibited an equivalent oxide thickness of {approx}0.93 nm.

36 MATERIALS SCIENCE↗

The second– and third– order nonlinear optical properties and electronic transition of a NLO chromophore: A DFT study

It is well known that the practical applications of second-order and third-order nonlinear optical (NLO) materials have been reported in modern technology, such as optical data processing, transmission and storage, etc. In this respect, the linear and nonlinear optical parameters (the molecular static polarizability (α), and the first–order static hyperpolarizability (β{sub 0}), the second–order static hyperpolarizability (γ)), UV-vis spectra and HOMO and LUMO energies of 2-(1′-(4’’’-Methoxyphenyl)-5′-(thien-2″-yl)pyrrol-2′-yl)-1,3-benzothiazole were investigated by using the HSEh1PBE/6–311G(d,p) level of density functional theory. The UV–vis spectra were simulated using TD/HSEh1PBE/6– 311G(d,p) level, and the major contributions to the electronic transitions were obtained. The molecular hardness (η) and electronegativity (χ) parameters were also obtained by using molecular frontier orbital energies. The NLO parameters of the title compound were calculated, and obtained data were compared with that of para-Nitroaniline (pNA) which is a typical NLO material and the corresponding experimental data. Obtained data of the chromosphere display significant molecular second-and third-nonlinearity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transition metal dimer on Au(111) surface: A first principle study

The adsorption behaviour of transition metal dimers M{sub 2} (M= Cu, Ag, Au) on the Au(111) surface have been studied using the density functional theory formalism. The projector augmented wave method under the spin polarized version of generalized gradient approximation scheme was employed to calculate the total energy. The results suggest that all dimers prefer to orient in parallel to the surface plane, where two M atoms are adsorbed on two nearby threefold fcc sites. We have investigated the chemical interaction between M atoms and Au surface through electronic density of state analysis. It is found that on deposition, the electronic density of states (EDOS) of M{sub 2} dimer becomes broader in comparison to their gas phase spectrum.

36 MATERIALS SCIENCE↗

Kinetic modeling of neutral transport for a continuum gyrokinetic code

In this work we present the first-of-its-kind coupling of a continuum full- f gyrokinetic turbulence model with a 6D continuum model for kinetic neutrals, carried out using the Gkeyll code. Our objective is to improve the first-principle understanding of the role of neutrals in plasma fueling, detachment, and their interaction with edge plasma profiles and turbulence statistics. Our model includes only atomic hydrogen and incorporates electron-impact ionization, charge exchange, and wall recycling. These features have been successfully verified with analytical predictions and benchmarked with the DEGAS2 Monte Carlo neutral code. We carry out simulations for a scrape-off layer (SOL) with simplified geometry and National Spherical Torus Experiment parameters. We compare these results to a baseline simulation without neutrals and find that neutral interactions reduce the normalized density fluctuation levels and associated skewness and kurtosis, while increasing auto-correlation times. A flatter density profile is also observed, similar to the SOL density shoulder formation in experimental scenarios with high fueling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radiative-capture cross sections for the La 139 ( n , γ ) reaction using thermal neutrons and structural properties of La 140

A set of prompt partial γ-ray production cross sections from thermal neutron capture were measured for the La 139 ( n , γ ) reaction using a guided beam of subthermal (thermal and cold) neutrons incident on a nat La 2 O 3 target at the Prompt Gamma Activation Analysis facility of the Budapest Research Reactor. Absolute La 140 cross sections were determined relative to the well-known comparator 35 Cl(n,γ) cross sections from the irradiation of a stoichiometric nat LaCl 3 sample. Here, the total cross section for radiative thermal neutron capture on La 139 from the sum of experimentally measured cross sections observed to directly feed the La 140 ground state was determined to be $σ$ $^{expt}_{0}$ = 8.58 (50) b.

139La(n, γ), E=thermal and cold↗

Electronic Coupling Calculations for Bridge-Mediated Charge Transfer Using Constrained Density Functional Theory (CDFT) and Effective Hamiltonian Approaches at the Density Functional Theory (DFT) and Fragment-Orbital Density Functional Tight Binding (FODFTB) Level

In this paper, four methods to calculate charge transfer integrals in the context of bridge-mediated electron transfer are tested. These methods are based on density functional theory (DFT). We consider two perturbative Green's function effective Hamiltonian methods (first, at the DFT level of theory, using localized molecular orbitals; second, applying a tight-binding DFT approach, using fragment orbitals) and two constrained DFT implementations with either plane-wave or local basis sets. To assess the performance of the methods for through-bond (TB)-dominated or through-space (TS)-dominated transfer, different sets of molecules are considered. For through-bond electron transfer (ET), several molecules that were originally synthesized by Paddon-Row and co-workers for the deduction of electronic coupling values from photoemission and electron transmission spectroscopies, are analyzed. The tested methodologies prove to be successful in reproducing experimental data, the exponential distance decay constant and the superbridge effects arising from interference among ET pathways. For through-space ET, dedicated p-stacked systems with heterocyclopentadiene molecules were created and analyzed on the basis of electronic coupling dependence on donor-acceptor distance, structure of the bridge, and ET barrier height. The inexpensive fragment-orbital density functional tight binding (FODFTB) method gives similar results to constrained density functional theory (CDFT) and both reproduce the expected exponential decay of the coupling with donor-acceptor distances and the number of bridging units. Finally, these four approaches appear to give reliable results for both TB and TS ET and present a good alternative to expensive ab initio methodologies for large systems involving long-range charge transfers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Surface and Bulk Water Ice on the Reactivity of a Water-forming Reaction

On the surface of icy dust grains in the dense regions of the interstellar medium, a rich chemistry can take place. Due to the low temperature, reactions that proceed via a barrier can only take place through tunneling. The reaction H+H{sub 2}O{sub 2}⟶H{sub 2}O+OH is such a case with a gas-phase barrier of ∼26.5 kJ mol{sup −1}. Still, the reaction is known to be involved in water formation on interstellar grains. Here, we investigate the influence of a water ice surface and of bulk ice on the reaction rate constant. Rate constants are calculated using instanton theory down to 74 K. The ice is taken into account via multiscale modeling, describing the reactants and the direct surrounding at the quantum mechanical level with density functional theory (DFT), while the rest of the ice is modeled on the molecular mechanical level with a force field. We find that H{sub 2}O{sub 2} binding energies cannot be captured by a single value, but rather they depend on the number of hydrogen bonds with surface molecules. In highly amorphous surroundings, the binding site can block the routes of attack and impede the reaction. Furthermore, the activation energies do not correlate with the binding energies of the same sites. The unimolecular rate constants related to the Langmuir–Hinshelwood mechanism increase as the activation energy decreases. Thus, we provide a lower limit for the rate constant and argue that rate constants can have values up to two order of magnitude larger than this limit.

79 ASTRONOMY AND ASTROPHYSICS↗

Defect suppression in wet-treated etched-and-regrown nonpolar m-plane GaN vertical Schottky diodes: A deep-level optical spectroscopy analysis

In this work, steady-state photocapacitance (SSPC) was conducted on nonpolar m-plane GaN n-type Schottky diodes to evaluate the defects induced by inductively coupled plasma (ICP) dry etching in etched-and-regrown unipolar structures. An ~10× increase in the near-midgap Ec – 1.9 eV level compared to an as-grown material was observed. Defect levels associated with regrowth without an etch were also investigated. The defects in the regrown structure (without an etch) are highly spatially localized to the regrowth interface. Subsequently, by depth profiling an etched-and-regrown sample, we show that the intensities of the defect-related SSPC features associated with dry etching depend strongly on the depth away from the regrowth interface, which is also reported previously. A photoelectrochemical etching (PEC) method and a wet AZ400K treatment are also introduced to reduce the etch-induced deep levels. A significant reduction in the density of deep levels is observed in the sample that was treated with PEC etching after dry etching and prior to regrowth. An ~2× reduction in the density of Ec – 1.9 eV level compared to a reference etched-and-regrown structure was observed upon the application of PEC etching treatment prior to the regrowth. The PEC etching method is promising for reducing defects in selective-area doping for vertical power switching structures with complex geometries.

36 MATERIALS SCIENCE↗

Electronic States of Nanostructured Systems: Titanium and Zirconia

The density functional method with pseudopotentials are used to study the electron states of nanoparticles and nanostructured systems: chains, films, and three-dimensional nanosystems of titanium and zirconia. It is shown that all studied titanium nanosystems have the density of electronic states (DES) of the metallic type, but zirconia nanosystem demonstrates a dielectric energy gap in the vicinity of the Fermi level. The density of states of nanostructured titanium is close in shape to DES of the single crystal but has a smoother shape due to disordering of the atomic arrangement. The forbidden band width of the nanostructured zirconia is smaller as compared to the corresponding width in crystalline ZrO{sub 2}, supposedly because of incomplete saturation of ionic bonds.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Band gap of epitaxial in-plane-dimerized single-phase NbO{sub 2} films

We demonstrate the epitaxial growth of high quality crystalline phase-pure NbO{sub 2} films on various oxide substrates using molecular beam epitaxy. Using a combination of reflection high-energy electron diffraction and x-ray diffraction we show that the films grow with the pseudo-rutile (100) orientation out of plane. The band gap of the NbO{sub 2} films is determined to be at least 1.0 eV using a combination of x-ray photoelectron spectroscopy and inverse photoelectron spectroscopy, in conjunction with hybrid density functional calculations of the density of states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio study of nitrogen-multisubstituted neutral and positively charged C{sub 20} fullerene

Ab initio investigation of structural and electronic properties of Nitrogen doped fullerenes, obtained from C{sub 20} by replacing up to 10 C atoms with N atoms, are studied by means of first principals density functional theory calculations using numerical orbitals as basis sets. We have obtained the ground state structures for C{sub 20−n}N{sub n} for n=1-10. While substituting nitrogen atoms, we cannot substitute more than 9 nitrogen atoms. Nitrogen doping in C20 shows a significant change in density of states. For a better comparison with experimental measurements, we have also considered some positively charged ions and report the differences between properties of these ions and the corresponding neutral molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Molecular Heterogeneous Catalysis: a Single-Site Zeolite-Supported Rhodium Complex for Acetylene Cyclotrimerization

By anchoring metal complexes to supports, researchers have attempted to combine the high activity and selectivity of molecular homogeneous catalysis with the ease of separation and lack of corrosion of heterogeneous catalysis. However, the intrinsic nonuniformity of supports has limited attempts to make supported catalysts truly uniform. We report the synthesis and performance of such a catalyst, made from [Rh(C{sub 2}H{sub 4}){sub 2}(CH{sub 3}COCHCOCH{sub 3})] and a crystalline support, dealuminated Y zeolite, giving {l_brace}Rh(C{sub 2}H{sub 4}){sub 2}{r_brace} groups anchored by bonds to two zeolite oxygen ions, with the structure determined by extended X-ray absorption fine structure (EXAFS) spectroscopy and the uniformity of the supported complex demonstrated by {sup 13}C NMR spectroscopy. When the ethylene ligands are replaced by acetylene, catalytic cyclotrimerization to benzene ensues. Characterizing the working catalyst, we observed evidence of intermediates in the catalytic cycle by NMR spectroscopy. Calculations at the level of density functional theory confirmed the structure of the as-synthesized supported metal complex determined by EXAFS spectroscopy. With this structure as an anchor, we used the computational results to elucidate the catalytic cycle (including transition states), finding results in agreement with the NMR spectra.

74 ATOMIC AND MOLECULAR PHYSICS↗

Column densities of interstellar molecular hydrogen

Equivalent widths of some 50 lines in the 0-0 to 5-0 Lyman bands of H2 are reported in the spectra of 28 stars. Curves of growth are given and column densities for levels from J = 0 to J = 5 are tabulated, with a few values and upper limits for N(6) and N(7), together with values for b, the velocity spread parameter. In three Orion stars and in rho Leo pairs of components are detected, the difference in radial velocity is determined, and column densities are measured or estimated; tentative identifications are made with the components observed by Hobbs (1969) in the Na D-lines. Column densities for HD are given for 13 stars. Upper limits for column densities in the first and second vibrational levels are listed for several stars; the ratio of N(J = 0) in the v double prime = 1 level to that in the ground vibrational level is less than 2.4 x 10 to the minus 8th power in zeta Oph. Values of a rotational excitation temperature for the higher J levels are given for all the stars. Data are presented which show an apparent increase of velocity dispersion with J for a number of stars, as measured both from the curves of growth and from line widths.

Spitzer, L., Jr.↗