Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC RIGIDITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

NEWTONIAN AND NON-NEWTONIAN MAGNETIC-FIELD RELAXATIONS IN SOLAR-CORONAL MHD

This paper treats the relaxation of a magnetic field into a minimum-energy force-free state in a cold (pressure-less) viscous fluid, under the frozen-in condition of perfect electrical conductivity and letting the viscosity-dissipated energy be completely lost. A non-Newtonian fluid in popular use is studied in relation to the Newtonian viscous fluid, as two alternative numerical means to (1) construct force-free fields representing solar coronal structures in realistic geometry and (2) investigate the Parker theory of spontaneous formation of electric current sheets as a basic MHD process. Faraday's induction equation imposes an independent condition on the fluid velocity at rigid, perfectly conducting boundaries. This boundary condition is quite compatible with Newtonian mechanics but not with the non-Newtonian fluid model where velocity is equated to the Lorentz force with a free, positive multiplicative-factor. This defining property gives rise to unphysical or artificial singularities not previously known that are completely distinct from the physically admissible singularities representing the current sheets of the Parker theory. In particular, the non-Newtonian fluid takes a magnetic field with neutral points from any one of a continuum of initial states into an unphysical state instead of the proper force-free end-state accessible by Newtonian relaxation. The validity of previously published MHD results based on this non-Newtonian fluid, including some counterclaims against the Parker theory, is dubious. Investigating the Parker theory requires numerical relaxation models capable of anticipating and accurately describing inevitable current-sheet singularities. By including a weak resistivity to dissipate the inevitable current sheets as they form, the field can change topology intermittently to seek a terminal force-free state free of singularities. The minimum-energy state of this more complete model corresponds to the long-lived relaxed structures in the corona.

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmic-Ray Diffusion Coefficients throughout the Inner Heliosphere from a Global Solar Wind Simulation

We use a three-dimensional magnetohydrodynamic simulation of the solar wind to calculate cosmic-ray diffusion coefficients throughout the inner heliosphere (2 R{sub ⊙}−3 au). The simulation resolves large-scale solar wind flow, which is coupled to small-scale fluctuations through a turbulence model. Simulation results specify background solar wind fields and turbulence parameters, which are used to compute diffusion coefficients and study their behavior in the inner heliosphere. The parallel mean free path (mfp) is evaluated using quasi-linear theory, while the perpendicular mfp is determined from nonlinear guiding center theory with the random ballistic interpretation. Several runs examine varying turbulent energy and different solar source dipole tilts. We find that for most of the inner heliosphere, the radial mfp is dominated by diffusion parallel to the mean magnetic field; the parallel mfp remains at least an order of magnitude larger than the perpendicular mfp, except in the heliospheric current sheet, where the perpendicular mfp may be a few times larger than the parallel mfp. In the ecliptic region, the perpendicular mfp may influence the radial mfp at heliocentric distances larger than 1.5 au; our estimations of the parallel mfp in the ecliptic region at 1 au agree well with the Palmer “consensus” range of 0.08–0.3 au. Solar activity increases perpendicular diffusion and reduces parallel diffusion. The parallel mfp mostly varies with rigidity (P) as P{sup .33}, and the perpendicular mfp is weakly dependent on P. The mfps are weakly influenced by the choice of long-wavelength power spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

PAMELA’S MEASUREMENTS OF MAGNETOSPHERIC EFFECTS ON HIGH-ENERGY SOLAR PARTICLES

The nature of particle acceleration at the Sun, whether through flare reconnection processes or through shocks driven by coronal mass ejections, is still under scrutiny despite decades of research. The measured properties of solar energetic particles (SEPs) have long been modeled in different particle-acceleration scenarios. The challenge has been to disentangle the effects of transport from those of acceleration. The Payload for Antimatter Matter Exploration and Light-nuclei Astrophysics (PAMELA) instrument enables unique observations of SEPs including the composition and angular distribution of the particles about the magnetic field, i.e., pitch angle distribution, over a broad energy range (>80 MeV)—bridging a critical gap between space-based and ground-based measurements. We present high-energy SEP data from PAMELA acquired during the 2012 May 17 SEP event. These data exhibit differential anisotropies and thus transport features over the instrument rigidity range. SEP protons exhibit two distinct pitch angle distributions: a low-energy population that extends to 90° and a population that is beamed at high energies (>1 GeV), consistent with neutron monitor measurements. To explain a low-energy SEP population that exhibits significant scattering or redistribution accompanied by a high-energy population that reaches the Earth relatively unaffected by dispersive transport effects, we postulate that the scattering or redistribution takes place locally. We believe that these are the first comprehensive measurements of the effects of solar energetic particle transport in the Earth’s magnetosheath.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure and properties of the Sr 2 In 1-x Sn x SbO 6 double perovskite

A series of n -type oxide double perovskite semiconductors, Sr 2 In 1-x Sn x SbO 6 (0 ≤ x ≤ 0.3) has been synthesized; Sn 4+ partially substitutes for In 3+ . 121 Sb and 119 Sn Mössbauer spectroscopy are employed to investigate the B-site cation ordering because this issue cannot be resolved by conventional diffraction techniques alone. Rigid ordering between In 3+ /Sn 4+ and Sb 5+ sites is revealed by the spectroscopic method, and hence in combination with the structural parameters extracted from the XRD structural refinements, the crystallographic structure of this series of compounds is depicted. Furthermore, the temperature dependent magnetic susceptibilities, band gaps, and carrier type are characterized, and the calculated band structure is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the possibility of the determining the average mass composition near 10 to the 14th power eV through the solar magnetic field

The discovery of primary ultrahigh energy (UHE) gamma-rays has spawned plans for a new generation of air shower experiments with unprecedented directional resolution. Such accuracy permits observation of a cosmic ray shadow due to the solar disc. Particle trajectory simulations through models of the large scale solar magnetic field were performed. The shadow is apparent above 10 to the 15th power eV for all cosmic ray charges /Z/ 26; at lower energies, trajectories close to the Sun are bent sufficiently for this shadow to be lost. The onset of the shadow is rigidity dependent, and occurs at an energy per nucleus of approx. Z x 10 to the 13th power eV. The possibility of determining the average mass composition near 10 to the 14th power eV from 1 year's observation at a mountain altitude array is investigated.

Lloyd-Evans, J.↗

Elasticity, Anisotropy and Magnetism of Anti-perovskite M{sub 3}AlC (M=Ti, Fe, Sm) from First-Principle Calculations

Elasticity, anisotropy, and magnetism of anti-perovskite M{sub 3}AlC (M=Ti, Fe, Sm) have been calculated and investigated via non-relativistic density functional theory. And the elasticity constant, elastic modulus, Poisson ratio, and Cauchy pressure of three structures have been obtained. Based on the Poisson ratio, Pugh modulus ratio, and Cauchy pressure, bonding attributes of the three materials have been analyzed. The result showed that Ti{sub 3}AlC is a brittle material with high degrees of strength, rigidity, and hardness, and Sm{sub 3}AlC and Fe{sub 3}AlC possess excellent toughness. Based on the universal elastic anisotropy index A{sup U}, anisotropy fraction ratios A{sub B}, A{sub G}, and A{sub E},and Zener factor A, it showed that all three M{sub 3}AlC structures demonstrated elasticity and anisotropy. The elasticity and anisotropy of the three M{sub 3}AlC structures has been illustrated in three-dimensional images of the elastic modulus. Compared with Ti{sub 3}AlC and Fe{sub 3}AlC, Sm{sub 3}AlC has a significantly higher level of anisotropy. Moreover, in this paper, the magnetism of transition metal Fe and rare earth element Sm in the M{sub 3}AlC structure has been compared and analyzed from the perspective of the electronic structure and population analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-F-BRA-02: Electromagnetic Tracking in Brachytherapy as An Advanced Modality for Treatment Quality Assurance

Purpose: To present the use of Electromagnetic Tracking (EMT) for quality assurance in brachytherapy by means of phantom studies and to assess the clinical applicability of EMT during HDR breast brachytherapy. Methods: An EMT system was investigated to examine its suitability for clinical applications in brachytherapy. A field generator served as electromagnetic field emitter. Sensors (magnetic sensitive only), connected to a control unit, were used and their respective position and orientation inside a pre-defined measurement volume (500 mm cube length) determined. Up to three 6DoF sensors were placed on the phantom’s surface to obtain additional reference coordinates used to derive relative measured positions of a smaller 5DoF sensor inserted in the 6F catheters of the implant. The catheters were successively measured by manual displacement of the sensor at ∼40 mm/s. The measured catheter tracks, acquired multiple times at various locations (CT and treatment room), were smoothed, divided into intervals (2.5 mm dwell step size), registered (rigid Iterative Closest Point transformation) and compared against the known phantom geometry. Results: The reference coordinates were used to exclude the influence of external (e.g., respiratory-induced) motion. Precision tests in a clinical setting showed variances below 1 mm (translational) and 1° (rotational), respectively. Our method for catheter reconstruction preserved the length of the tracked catheter (within 1 mm). The measured tracking accuracy was 1±0.3 mm (maximum: 2 mm). The results are less accurate in environments potentially interfering with the magnetic field, e.g., in the vicinity of ferromagnetic table components. Conclusion: Our EMT system is able to perform reproducible and accurate catheter tracking and reconstruction. Currently, measurements of the implant geometry in HDR breast treatments are initiated. Online implant monitoring by means of EM tracking may be a first step towards advanced brachytherapy treatment QA. The study was financially supported by ELEKTA | Nucletron. There are no further disclosures and conflicts.

60 APPLIED LIFE SCIENCES↗

SU-E-J-209: Geometric Distortion at 3T in a Commercial 4D MRI-Compatible Phantom

Purpose: There are very few commercial 4D phantoms that are marketed as MRI compatible. We are evaluating one such commercial phantom, made to be used with an MRI-Linear accelerator. The focus of this work is to characterize the geometric distortions produced in this phantom at 3T using 3 clinical MR pulse sequences. Methods: The CIRS MRI-Linac Dynamic Phantom (CIRSTM) under investigation in this study consists of a softwaredriven moving tumour volume within a thorax phantom body and enables dose accumulation by placing a dosimeter within the tumour volume. Our initial investigation is to evaluate the phantom in static mode prior to examining its 4D capability. The water-filled thorax phantom was scanned using a wide-bore Philips 3T Achieva MRI scanner employing a Thoracic xl coil and clinical 2D T1W FFE, 2D T1W TSE and 3D T1W TFE pulse sequences. Each of the MR image sets was rigidly fused with a reference CT image of the phantom employing a rigid registration with 6 degrees of freedom. Geometric distortions between the MR and CT image sets were measured in 3 dimensions at selected points along the periphery of the distortion grid embedded within the phantom body (11.5, 7.5 and 3 cm laterally, ant/post and sup/inf of magnetic isocenter respectively). Results: The maximal measured geometric distortions between the MR and reference CT points of interest were 0.9, 1.8 and 1.3 mm in the lateral, anteriorposterior and cranio-caudal directions, respectively. For all 3 spatial dimensions, the maximal distortions occurred for the FFE pulse sequence. Maximal distortions for the 2D FFE, 2D TSE and 3D TFE sequences were 1, 0.7 and 1.8 mm, respectively. Conclusion: Our initial static investigation of this phantom shows minimal geometric distortions at 3T along the periphery of the embedded grid. CIRS has provided us with a phantom at no charge for evaluation at 3 Tesla.

60 APPLIED LIFE SCIENCES↗

Charge-Sign Dependent Cosmic-Ray Modulation Observed with the Calorimetric Electron Telescope on the International Space Station

We present the observation of a charge-sign dependent solar modulation of galactic cosmic rays (GCRs) with the Calorimetric Electron Telescope onboard the International Space Station over 6 yr, corresponding to the positive polarity of the solar magnetic field. The observed variation of proton count rate is consistent with the neutron monitor count rate, validating our methods for determining the proton count rate. It is observed by the Calorimetric Electron Telescope that both GCR electron and proton count rates at the same average rigidity vary in anticorrelation with the tilt angle of the heliospheric current sheet, while the amplitude of the variation is significantly larger in the electron count rate than in the proton count rate. We show that this observed charge-sign dependence is reproduced by a numerical “drift model” of the GCR transport in the heliosphere. This is a clear signature of the drift effect on the long-term solar modulation observed with a single detector.

O. Adriani↗

Magnonic band structure, complete bandgap, and collective spin wave excitation in nanoscale two-dimensional magnonic crystals

We present the observation of a complete bandgap and collective spin wave excitation in two-dimensional magnonic crystals comprised of arrays of nanoscale antidots and nanodots, respectively. Considering that the frequencies dealt with here fall in the microwave band, these findings can be used for the development of suitable magnonic metamaterials and spin wave based signal processing. We also present the application of a numerical procedure, to compute the dispersion relations of spin waves for any high symmetry direction in the first Brillouin zone. The results obtained from this procedure have been reproduced and verified by the well established plane wave method for an antidot lattice, when magnetization dynamics at antidot boundaries are pinned. The micromagnetic simulation based method can also be used to obtain iso–frequency contours of spin waves. Iso–frequency contours are analogous of the Fermi surfaces and hence, they have the potential to radicalize our understanding of spin wave dynamics. The physical origin of bands, partial and full magnonic bandgaps have been explained by plotting the spatial distribution of spin wave energy spectral density. Although, unfettered by rigid assumptions and approximations, which afflict most analytical methods used in the study of spin wave dynamics, micromagnetic simulations tend to be computationally demanding. Thus, the observation of collective spin wave excitation in the case of nanodot arrays, which can obviate the need to perform simulations, may also prove to be valuable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Miniature high speed compressor having embedded permanent magnet motor

A high speed centrifugal compressor for compressing fluids includes a permanent magnet synchronous motor (PMSM) having a hollow shaft, the being supported on its ends by ball bearing supports. A permanent magnet core is embedded inside the shaft. A stator with a winding is located radially outward of the shaft. The PMSM includes a rotor including at least one impeller secured to the shaft or integrated with the shaft as a single piece. The rotor is a high rigidity rotor providing a bending mode speed of at least 100,000 RPM which advantageously permits implementation of relatively low-cost ball bearing supports.

Zhou, Lei↗

Time-odd mean fields in covariant density functional theory: Rotating systems

Time-odd mean fields (nuclear magnetism) and their impact on physical observables in rotating nuclei are studied in the framework of covariant density functional theory (CDFT). It is shown that they have profound effect on the dynamic and kinematic moments of inertia. Particle number, configuration, and rotational frequency dependencies of their impact on the moments of inertia have been analyzed in a systematic way. Nuclear magnetism can also considerably modify the band crossing features such as crossing frequencies and the properties of the kinematic and dynamic moments of inertia in the band crossing region. The impact of time-odd mean fields on the moments of inertia in the regions away from band crossing only weakly depends on the relativistic mean-field parametrization, reflecting good localization of the properties of time-odd mean fields in CDFT. The moments of inertia of normal-deformed nuclei considerably deviate from the rigid-body value. On the contrary, superdeformed and hyperdeformed nuclei have the moments of inertia which are close to rigid-body value. The structure of the currents in rotating frame, their microscopic origin, and the relations to the moments of inertia have been systematically analyzed. The phenomenon of signature separation in odd-odd nuclei, induced by time-odd mean fields, has been analyzed in detail.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Novel Rigid PU Foam Based on Modified Used Palm Oil as Sound Absorbing Material

Novel bio-polyol was successfully synthesized from used palm oil (UPO) and was further tested for preparing rigid polyurethane (PU) foams. In this work, the modified used palm oil (MUPO) was synthesized in a single step process, by epoxidation together with ring opening reactions. The reagent ratios and reaction time for MUPO synthesis were also studied. The chemical structure of MUPO was confirmed by {sup 1}H-NMR spectroscopy and FTIR. The hydroxyl value of MUPO increased with reaction time and depended also on reagent ratio. The GPC trace of MUPO showed a bimodal distribution and the molecular weight slightly decreased with OH value. New rigid PU foams were prepared from MUPO. The foam cell size and compressive strength at 10% strain increased with OH value. All the rigid PU foams had excellent sound absorption coefficients. The lowest OH value (OHV = 100 mg KOH/g) provided sound absorption from 2200 Hz. In addition, the flammability of PU foams was improved by adding 30% wt of triphosphate (TPP) as flame retardant. The investigations showed that a bio-polyol based on UPO was suitable for preparing rigid PU foams that could serve as alternative sound absorbing materials. Graphical Abstract: .

36 MATERIALS SCIENCE↗

In situ {sup 1}H-TD-NMR: Quantification and microstructure development during the early hydration of alite and OPC

An in situ framework for {sup 1}H time-domain nuclear magnetic resonance analysis was developed and applied on alite and OPC hydration. Highly time-resolved quantitative data on the evolution of proton reservoirs during hydration was collected for up to 40 h. Reservoirs could be clearly assigned to mobile (mix water), intermediate (C-S-H) and rigid fractions (CH, ettringite). Comparison of determined fraction quantities with data from in situ XRD measurements and heat flow calorimetry show very good agreement. During alite hydration at 23 °C, a bulk water content of 4 H{sub 2}O in C{sub 1.7}SH{sub x} was confirmed. T2 relaxation times of the mobile fraction shifted towards shorter times from the start of the main reaction until the maximum of the heat flow. Microstructure evolution is nearly finished at that point in time. T2 relaxation times are severely shortened for iron-containing OPC, but are still evaluable.

36 MATERIALS SCIENCE↗

Toward accurate measurement of electromagnetic field by retrieving and refining the center position of non-uniform diffraction disks in Lorentz 4D-STEM

Recent advancement in scanning transmission electron microscopy (STEM) allows the use of 4D-STEM, a technique that captures an electron diffraction pattern at each scan point in STEM, to measure electrostatic and magnetic potential and field in materials. However, accurate measurement, separation of the magnetic and electric signals, and removal of artifacts remain challenging, especially in the presence of complex non-uniform diffraction contrast within the disks. In this work, based on dynamic simulations of 4D-STEM patterns built upon superstructures consisting of millions of atoms to account for different sample thickness and edge geometries, we show how the shape and intensity distribution of the central disk are affected by multiple scattering. We propose a robust refinement procedure through iteration of the spin-sensitive peak position of the disk-center in the circular Hough transform filtered images from experimental Lorentz 4D-STEM dataset after minimizing the possible artifacts, such as those due to the change of thickness, dynamic scattering, and scanning process. We verify that caution must be taken as in practice the rigid-disk-shift model used to reconstruct induction maps can easily break down due to disk-protrusion when there exists a nonconstant phase gradient or thickness within the width of the probe. Through quantitative analysis and comparing experiment with calculation the effect of the non-spin-related intensity distribution inside the disk as well as that causes the disk shift due to the intensity-protrusion can be removed, and high-quality magnetic field mapping is possible.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlating Local Compositions and Structures with the Macroscopic Optical Properties of Ce 3+ -Doped CaSc 2 O 4 , an Efficient Green-Emitting Phosphor

Calcium scandate (CaSc 2 O 4 ) substituted with small amounts (<1%) of Ce 3+ is a recently discovered bright-green-emitting phosphor with favorable light absorption and emission properties and robust temperature stability that make it well-suited for solid-state white-lighting applications. Combined analyses of scattering, solid-state nuclear magnetic resonance (NMR), electron paramagnetic resonance (EPR), and photoluminescence measurements establish the compositional and structural origins of the macroscopic optical properties of this phosphor material. Simultaneous refinements of synchrotron X-ray and neutron diffraction data of Ce 3+ -doped CaSc 2 O 4 enable the average crystal structure to be determined, which is shown to correspond to an exceedingly rigid host structure, as corroborated by density functional theory (DFT) calculations. Such structural rigidity leads to high quantum efficiency, which is optimized by the substitution of as little as 0.5 mol % of Ce 3+ for Ca 2+ ions, with higher extents of Ce 3+ substitution leading to decreased photoluminescent quantum yields. Solid-state 43 Ca and 45 Sc magic-angle spinning (MAS) NMR spectra are sensitive to the effects of the paramagnetic Ce 3+ dopant ions on nearby atoms in the host structure and yield evidence for local structural distortions. EPR measurements provide direct insights on structures of the Ce 3+ ions, as a function of Ce 3+ substitution. The combined scattering and spectroscopic analyses yield detailed new understanding of the local and long-range structures of Ce 3+ -doped CaSc 2 O 4 , which account for the sensitive composition-dependent optical properties of this important phosphor material.

36 MATERIALS SCIENCE↗

CONVECTIVE BURSTS AND THE COUPLING OF SATURN'S EQUATORIAL STORMS AND INTERIOR ROTATION

Temporal variations of Saturn's equatorial jet and magnetic field hint at rich dynamics coupling the atmosphere and the deep interior. However, it has been assumed that rotation of the interior dynamo must be steady over tens of years of modern observations. Here we use a numerical convection model and scaling estimates to show how equatorial convective bursts can transfer angular momentum to the deeper interior. The numerical model allows angular momentum transfer between a fluid outer spherical shell and a rigid inner sphere. Convection drives a prograde equatorial jet exhibiting quasiperiodic bursts that fill the equatorial volume outside the tangent cylinder. For each burst strong changes in the equatorial surface velocity are associated with retrograde torque on the inner sphere. Our results suggest that Saturn's Great White Spot, a giant storm that was observed to fill the equatorial region in 1990, could mobilize a volume of fluid carrying roughly 15% of Saturn's moment of inertia. Conservation of angular momentum then implies that a 20% change in the equatorial jet angular velocity could change the average interior rotation rate by about 0.1%-roughly an order of magnitude less than the apparent rotation rate changes associated with Saturn's kilometric radio (SKR) signal. However, if the SKR signal originates outside the liquid metal core in a 'planetary tachocline' that separates the layer of fast zonal flow from the magnetically controlled and slowly convecting deep interior, then convective bursts can provide a possible mechanism for the observed {approx}1% SKR changes.

79 ASTRONOMY AND ASTROPHYSICS↗

Accelerated vortex dynamics across the magnetic 3D-to-2D crossover in disordered superconductors

Disorder can have remarkably disparate consequences in superconductors, driving superconductor–insulator transitions in ultrathin films by localizing electron pairs and boosting the supercurrent carrying capacity of thick films by localizing vortices (magnetic flux lines). Though the electronic 3D-to-2D crossover at material thicknesses d ~ ξ (coherence length) is well studied, a similarly consequential magnetic crossover at d ~ L c (pinning length) that should drastically alter material properties remains largely underexamined. According to collective pinning theory, vortex segments of length L c bend to adjust to energy wells provided by point defects. Consequently, if d truncates L c , a change from elastic to rigid vortex dynamics should increase the rate of thermally activated vortex motion S. Here, we characterize the dependence of S on sample thickness in Nb and cuprate films. The results for Nb are consistent with collective pinning theory, whereas creep in the cuprate is strongly influenced by sparse large precipitates. In conclusion, we leverage the sensitivity of S to d to determine the generally unknown scale L c , establishing a new route for extracting pinning lengths in heterogeneously disordered materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗