Electronic tuning of a dye laser using the acousto-optic filter
Dye laser electronic tuning by inserting calcium-molybdenum oxide acousto-optic filter into cavity
Hansch, T. W.↗
SEARCH · Search NASA
Results for “MOLYBDENUM”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High voltage electrical insulation coating for refractory materials
Formula and process have been developed for coating refractory metal surfaces with high voltage electrical insulation for use at temperatures to 600 C. Coatings were specifically developed as an insulation for the surface of a perforated, molybdenum, ion-accelerator grid, but are not limited to this application.
Lent, W. E.↗
Relationship between vegetation reflectance spectra and soil geochemistry: New data from Catheart Mountain, Maine
Spectral reflectance curves for red spruce and balsam fir in the 350- to 1100-nanometer region showed differences between specimens growing over and away from a concealed copper deposit at Catheart Mountain, Maine. A sample group of 15 anomalous spruce, 9 background spruce, 10 anomalous fir, and 10 background fir was studied. Measurements of copper and molybdenum contents in the supporting soil were used to categorize the trees as anomalous or background. Analyses using parametric and nonparametric statistical tests were performed to establish whether significant differences existed between the anomalous and background groups. At the 95% confidence level, significant differences were found to exist for both species, generally in the chlorophyll band centered at about 550 nanometers and in the region from 700 to 900 nanometers.
Canney, F. C.↗
Hydrogen plasma tests of some insulating coating systems for the nuclear rocket thrust chamber
Several plasma-sprayed and slurry-coated insulating coating systems were evaluated for structural stability in a low-pressure hot hydrogen environment at a maximum heat flux of 19.6 million watts/sq meter. The heat was provided by an electric-arc plasma generator. The coating systems consisted of a number of thin layers of metal oxides and/or metals. The materials included molybdenum, nichrome, tungsten, alumina, zirconia, and chromia. The study indicates potential usefulness in this environment for some coatings, and points up the need for improved coating application techniques.
Current, A. N.↗
Generation of long time creep data on refractory alloys at elevated temperatures
Creep tests were conducted on two tantalum alloys (ASTAR 811C and T-111 alloy), on a molybdenum alloy (TZM), and on CVD tungsten. The T-111 alloy 1% creep life data have been subjected to Manson's station function analysis, and the progress on this analysis is described. In another test program, the behavior of T-111 alloy with continuously varying temperatures and stresses has been studied. The results indicated that the previously described analysis predicts the observed creep behavior with reasonable accuracy. In addition to the T-111 test program, conventional 1% creep life data have been obtained for ASTAR 811C alloy. Previously observed effects of heat treatment on the creep strength of this material have been discussed and a model involving carbide strengthening primarily at the grain boundaries, rather than in a classical dispersion hardening mechanism, has been proposed to explain the observed results.
Sheffler, K. D.↗
Radiofrequency-sputtered coatings for lubrication system components and other complex surfaces
Irregularly shaped surfaces, such as lubrication system components (ball bearings, seals, gears, etc.), can be coated on all surfaces, including irregular shapes, when radiofrequency sputtering is used. When the specimen is properly located with respect to the sputtering target, the sputtered material covers the entire surface of the object irrespective of its geometrical configuration. An adherent, dense film is formed. The film thickness varies from 20 to 50 percent on, for example, a hearing cage or race depending on its geometry. When sputtered solid film lubricants such as molybdenum disulfide are used, a film thickness only of the order of 10 to the minus 7th power m (thousands of angstroms) is required at the contacting areas. It is only essential to determine the required film thickness at the critical areas in need of lubrication. The sections outside the areas to be lubricated fall within the thickness deviation range of 20 to 50 percent, which still constitutes a negligible change respect to tolerance requirements.
Spalvins, T.↗
Some neutron and gamma radiation characteristics of plutonium cermet fuel for isotopic power sources
Gamma and neutron measurements on various types of plutonium sources are presented in order to show the effects of O-17, O-18 F-19, Pu-236, age of the fuel, and size of the source on the gamma and neutron spectra. Analysis of the radiation measurements shows that fluorine is the main contributor to the neutron yields from present plutonium-molybdenum cermet fuel, while both fluorine and Pu-236 daughters contribute significantly to the gamma ray intensities.
Neff, R. A.↗
Radiation from plutonium 238 used in space applications
The principal mode of the nuclear decay of plutonium 238 is by alpha particle emission at a rate of 17 curies per gram. Gamma radiation also present in nuclear fuels arises primarily from the nuclear de-excitation of daughter nuclei as a result of the alpha decay of plutonium 238 and reactor-produced impurities. Plutonium 238 has a spontaneous fission half life of 4.8 x 10 to the 10th power years. Neutrons associated with this spontaneous fission are emitted at a rate of 28,000 neutrons per second per gram. Since the space fuel form of plutonium 238 is the oxide pressed into a cermet with molybdenum, a contribution to the neutron emission rate arises from (alpha, n) reactions with 0-17 and 0-18 which occur in natural oxygen.
Keenan, T. K.↗
Effect of metallurgical structure and properties on adhesion and friction behavior of cobalt alloys
The metallurgical structure and some of the mechanical properties of two cobalt alloys, cobalt-50% iron and cobalt-25% molybdenum-10% chromium, were determined under various heat treated conditions. The mechanical properties of the bcc disordered Co-50Fe alloy, which was found to be very brittle, indicated an exceedingly low fracture strength, low hardness, and very weak grain boundary strength. Ordering by suitable heat treatment only produced a more brittle material with a lower fracture strength and a slightly higher hardness value. Work hardening was found to produce a finer grain structure and a greater grain boundary strength. Tensile properties were examined. It was found that the Co-25Mo-10Cr alloy was difficult to place in the alpha Co solid solution condition, which limited the ability to use precipitation as a hardening reaction. Over two hundred adhesion cycles from zero contact load, to maximum load, to fracture were conducted between couples for each of the above alloys in an ultrahigh vacuum system which would permit the sample surfaces to be cleaned of all contaminant layers. In the Co-50Fe case, the calculated fracture stress from the adhesion tests showed values in the range of 80 to 150 k.s.i., which is about ten times greater than the values from tension tests.
Keller, D. V., Jr.↗
Interactions between creep, fatigue and strain aging in two refractory alloys
The application of low-amplitude, high-frequency fatigue vibrations during creep testing of two strain-aging refractory alloys (molybdenum-base TZC and tantalum-base T-111) significantly reduced the creep strength of these materials. This strength reduction caused dramatic increases in both the first stage creep strain and the second stage creep rate. The magnitude of the creep rate acceleration varied directly with both frequency and A ratio (ratio of alternating to mean stress), and also varied with temperature, being greatest in the range where the strain-aging phenomenon was most prominent. It was concluded that the creep rate acceleration resulted from a negative strain rate sensitivity which is associated with the strain aging phenomenon in these materials. (A negative rate sensitivity causes flow stress to decrease with increasing strain rate, instead of increasing as in normal materials). By combining two analytical expressions which are normally used to describe creep and strain aging behavior, an expression was developed which correctly described the influence of temperature, frequency, and A ratio on the TZC creep rate acceleration.
Sheffler, K. D.↗
Optimization of electrostatic dual-grid beam-deflection system
Tests were performed to minimize accelerator grid erosion of a 5-cm diameter Kaufman ion thruster due to direct beam impingement. Several different screen hole diameters, pillow-shape-square screen holes, and dished screen grids were tried. The optimization was accomplished by copper plating the accelerator grid before testing each grid configuration on a thruster for a 2-hour run. The thruster beam sputtered copper and molybdenum from the accelerator grid where the beam impinged. The observed erosion patterns and measured accelerator currents were used to determine how to modify the accelerator system. The lowest erosion was obtained for a 50-percent open area pillow-shape-square-aperture screen grid, dished 0.043 centimeter convex toward the accelerator grid, which was positioned with the center of the screen grid 0.084 centimeter from the accelerator grid. During this investigation the accelerator current was reduced from 120 to 55 microamperes and was also more uniformly distributed over the area of the accelerator grid.
Hudson, W. R.↗
Five-centimeter diameter ion thruster development
All system components were tested for endurance and steady state and cyclic operation. The following results were obtained: acceleration system (electrostatic type), 3100 hours continuous running; acceleration system (translation type), 2026 hours continuous running; cathode-isolator-vaporizer assembly, 5000 hours continuous operation and 190 restart cycles with 1750 hours operation; mercury expulsion system, 5000 hours continuous running; and neutralizer, 5100 hours continuous operation. The results of component optimization studies such as neutralizer position, neutralizer keeper hole, and screen grid geometry are included. Extensive mapping of the magnet field within and immediately outside the thruster are shown. A technique of electroplating the molybdenum accelerator grid with copper to study erosion patterns is described. Results of tests being conducted to more fully understand the operation of the hollow cathode are also given. This type of 5-cm thruster will be space tested on the Communication Technology Satellite in 1975.
Weigand, A. J.↗
Dynamic friction and wear of a solid film lubricant during radiation exposure in a nuclear reactor
The effect of nuclear reactor radiation on the performance of a solid film lubricant was studied. The film consisted of molybdenum disulfide and graphite in a sodium silicate binder. Radiation levels of fast neutrons (E or = 1 MeV) were fluxed up to 3.5 times 10 to the 12th power n/sq cm-sec (intensity) and fluences up to 2 times 10 to the 18th power n/sq cm (total exposure). Coating wear lives were much shorter and friction coefficients higher in a high flux region of the reactor than in a low flux region. The amount of total exposure did not affect lubrication behavior as severely as the radiation intensity during sliding.
Jacobson, T. P.↗
The synergistic effects of slip ring-brush design and materials
The design, fabrication, and testing of four power slip rings for synchronous orbit application are considered. Environmental and instrumentation systems necessary for monitoring electrical noise, friction, and brush wear in air and at less than 5 X 10 to the minus 8th power torr were developed. Composite brushes consisting of silver-molybdenum disulfide-graphite and silver-niobium diselenide-graphite were employed on rings of coin silver and rhodium plate. These four contact combinations were tested during ambient condition run-in at 150 and a humidity sequence at 0.1. The first nine months of a two year vacuum test performed at 0.1 rpm were completed.
Lewis, N. E.↗
Identification of geostructures of continental crust, particularly as they relate to mineral-resource evaluation
The authors have identified the following significant results. As a precursor to the ERTS-1 investigation, the spatial relationship of geostructures seen on Nimbus IDCS photographs to the distribution of mineralized areas in Alaska and western Canada was analyzed to determine the possible metallogenic significance of the geostructures. In Canada, mercury and porphyry molybdenum deposits are closely associated with strong northwest-trending fault systems; the development of mineralized regions seems related to major crustal zones or fractures trending southwestward across the Cordillera from the Precambrian shield. In Alaska, comparison of the northeast- and northwest-trending set of possible crustal structures shown on the Nimbus photo, with the distribution of known mineral deposits suggests a similar relationship. The mineralized region of massive sulfides in Prince William Sound and upper Copper River areas and of porphyry coppers in the Nabesna area forms a broad northeast-trending belt possibly related to the Minto Arch on the Shield. The belt of metalliferous deposits in the western Alaska Range follows a comparable northeast trend. Mercury deposits, suggested by many to be fault-controlled, together with most tin and tungsten deposits, occupy a northeast-trending belt between the Bristol Bay-Mackenzie Bay linear and extensions of a linear along the lower Yukon River. This belt intersects the northwest-trending Canadian belt of similar deposits in the Fairbanks area.
Gryc, G.↗
Generation of long time creep data on refractory alloys at elevated temperatures
Ultrahigh vacuum creep tests were conducted on tantalum, tungsten, and molybdenum alloys to develop creep data and to evaluate the influence of liquid lithium exposure on the creep behavior of the tantalum alloy T-111. Test conditions were generally selected to provide 1% creep in 1000 to 10,000 hours, with test temperatures ranging from 1600 to 2912 F (1144 to 1873 K). Tests on T-111 specimens exposed to vacuum and to liquid lithium for various times and temperatures showed large reductions in creep strength for exposures in the 1800 to 1900 F (1255 to 1310 K) range. Tests on the ASTAR 811c showed a significant influence of grain size on the creep strength of this material, with larger grain size specimens being significantly stronger above the equicohesive temperature of 2000 F (1366 K).
Sheffler, K. D.↗
Generation of long time creep data on refractory alloys at elevated temperatures
Ultrahigh vacuum creep tests were performed on tungsten, molybdenum, and tantalum alloys to develop design creep data and to evaluate the influence of liquid lithium exposure on the creep resistance of a tantalum alloy. Test conditions were generally selected to provide 1% creep in 1000 to 10,000 hours, with the test temperatures ranging between 1600 and 2900 F (1144 K and 1866 K). One percent creep life data from a tantalum-base T-111 alloy (Ta-8%W-2%Hf) were analyzed using a station function method to provide an improved parametric representation of the T-111 data. In addition, the minimum creep rate data from an ASTAR 811C alloy (Ta-8%W-1%Re-0.7%Hf0.025%C) were analyzed to determine the stress and temperature dependence of creep rate. Results of this analysis indicated that the activation energy for creep decreased from about 150 Kcal/mole (5130 J/mole) above 2400 F (1589 K) to about 110 Kcal/mole (3760 J/mole) below 2000 F (1361 K). This temperature range corresponds to the range where the creep mechanism changes from grain boundary sliding to intragranular creep.
Sheffler, K. D.↗
Interactions between creep, fatigue, and strain-aging in two refractory metal alloys.
The application of low-amplitude, high-frequency fatigue vibrations during creep testing of two strain-aging refractory alloys (molybdenum-base TZC and tantalum-base T-111) significantly reduced the creep strength of these materials. This strength reduction caused dramatic increases in both the first-stage creep strain and the second-stage creep rate. The magnitude of the creep rate acceleration varied directly with both frequency and A ratio (ratio of alternating to mean stress), and also varied with temperature, being greatest in the range where the strain-aging phenomenon was most prominent. It was concluded that the creep rate acceleration resulted from a negative strain rate sensitivity which is associated with the strain-aging phenomenon in these materials. (A negative rate sensitivity causes flow stress to decrease with increasing strain rate, instead of increasing as in normal materials.)
Sheffler, K. D.↗