Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microprobe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

An experimental, low-cost, silicon-aluminide high-temperature coating for superalloys

An evaluation of a duplex silicon-slurry/aluminide coating is presented. The coating is cyclically tested in Mach 1 combustion gases for oxidation and thermal fatigue resistance at 1093 C and in Mach 0.3 gases for hot-corrosion resistance at 900 C. The base metal superalloys are ViA and B-1900. The coated B-1900 specimens performed much better in oxidation than similar specimens coated with aluminides and almost as well as the more expensive Pt-Al and MCrAlY (where M is Ni and/or Co) coatings deposited by the physical vapor deposition process. The coating also provided good hot corrosion protection. Metallographic, X-ray, and electron microprobe studies are used to characterize the coating, determine failure mechanisms, and study some of the changes due to exposure.

Young, S. G.↗

Evaluation of hot corrosion behavior of thermal barrier coatings

Calcium silicate and yttria stabilized zirconia/MCrAlY thermal barrier coating systems on air-cooled specimens were exposed to sodium plus vanadium doped Mach 0.3 combustion gases. Thermal barrier coating endurance was determined to be a strong inverse function of ceramic coating thickness. Coating system durability was increased through the use of higher Cr + Al NiCrAl and CoCrAlY bond coatings. Chemical and electron microprobe analyses supported the predictions of condensate compositions and the determination of their roles in causing spalling of the ceramic coatings.

Hodge, P. E.↗

Silicon in carbonaceous chondrite metal - Relic of high-temperature condensation

Electron microprobe analyses of an extraordinarily large metal grain from the Murchison type 2 carbonaceous chondrite gave 0.24 mole % silicon. Thermodynamic calculations show that this is a natural consequence of condensation of alloys from the solar nebular gas at a total pressure between 10 to the -5th and 10 to the -3rd atm, provided they failed to equilibrate with it after cooling to less than 1200 K

Grossman, L.↗

Petrographic and chemical characterization of igneous lithic clasts from mesosiderites and howardites and comparison with eucrites and diogenites

Petrographic, electron microprobe, and instrumental neutron activation analysis (INAA) studies of igneous lithic clasts separated from mesosiderites and howardites and INAA investigation of whole rock eucrites and diogenites are presented. The trace element abundances in basaltic lithic clasts indicate more complex differentiation episodes than in eucrites which include sequential melting and expulsion of liquid from the source region and remelting of cumulate materials. Pyroxenites from mesosiderites show slight enrichments in Sc and Mn than diogenites suggesting that these pyroxenites are not fragments of diogenites. It is concluded that the heat source characteristics are spatially and temporally variable, suggesting that heating of the differentiated meteorite parent bodies may have partly come from outside the parent body.

Mittlefehldt, D. W.↗

The petrology and chemistry of basaltic fragments from the Apollo 11 soil - I

A study of basaltic fragments from the Apollo 11 bulk sample using instrumental neutron activation analysis, the petrographic microscope, and the electron microprobe is presented. The fragments include Group A, B2, and B3 basalts, of which two of the Group A samples are vitrophyres with bulk compositions similar to the crystalline high-K rocks which crystallized under different physical conditions and represent a second high-K cooling unit. The B2 samples relate to each other through ilmenite fractionation, and the B3 samples relate through olivine fractionation; it is concluded that the B2 samples have an anomalously high La/K ratio and may have generated in the same source region as the Group D basalts.

Beaty, D. W.↗

Petrography and olivine mineral chemistry of chondrules and inclusions in the Allende meteorite

The examination of 19 polished-thin sections from a sample of the Allende meteorite reveals that anhedral olivine chondrules (OCs) are the most abundant chondrule type (19.7% of total chondrules + inclusions), followed by recrystallized OCs (7.5%), euhedral OCs (2.9%), glassy/skeletal OCs (2.7%), and barred OCs (2.3%). The most abundant inclusions are those comprised of many small olivine crystals with varying amounts of opaque minerals and glass (31.5%), followed by fine grained inclusions (16.1%) and single olivine crystals (15.7%). Microprobe analyses of olivines show that recrystallized and barred chondrules are the most forsteritic and exhibit relatively narrow compositional ranges, whereas single crystals have the widest range, from Fa sub 0.3 to Fa sub 49.

Simon, S. B.↗

Li, Be, and B in minerals of a refractory-rich Allende inclusion

The abundances of Li, Be, and B and the isotopic ratios of Li and B have been measured by ion microprobe in melilite, pyroxene, anorthite, and spinel grains in a coarse-grained inclusion from the Allende meteorite. Based on the measurements, it is estimated that the bulk inclusion contains 200 ppb Li, 310 ppb Be, and 18 ppm B. The B is probably due to contamination. The Li-7/Li-6 ratios in spinels, pyroxene, and melilite are indistinguishable at the + or - 15% level and lie within the uncertainty (+ or - 15%) of the range of values reported for samples of the earth and meteorites. It has been determined that this inclusion contains an excess of Al-correlated Mg-26, implying that Al-26 was once present in it. The Li-Be-B effects for two solar-system proton-irradiation models which propose to account for Al-26 in Allende inclusions have been calculated. It is found that the predicted Li-Be-B abundances and isotopic ratios are grossly different from those observed in any solar-system materials.

Phinney, D.↗

XPS and SAM studies of the surface chemistry of lunar impact glasses including 12054

We report and discuss quantitative X-ray photoemission (XPS) analyses of mm size areas and qualitative scanning Auger microprobe (SAM) analyses of micron size areas on the surfaces of impact glass coatings found on fragments in the 14161 coarse fines and on the top surface, and a reentrant crack surface of rock 12054. The data suggest that some segregation occurs during impact glass formation leading to surface enrichments in Si and depletions in Mg, Al, Ca, and Ti. The magnitude of the effect appears fairly small, although the complexity of the surfaces severely complicates the data analysis. Because of the complexity of the surfaces, both XPS and SAM data were essential. A search for direct evidence of either solar wind sputter erosion or vapor deposition on the exposed top surface of 12054 provided interesting results which we cannot yet fully interpret. Both this surface and the surface from the re-entrant crack showed enrichments of more than a factor of two in Fe with respect to the bulk.

Housley, R. M.↗

Olivines and olivine coronas in mesosiderites

The paper presents a study of olivines and their surrounding coronas in mesosiderites texturally and compositionally using optical and microprobe methods. Olivine composition ranges from Fo(58-92) and shows no consistent pattern of distribution within and between mesosiderites; olivine occurs as large single crystals or as partially recrystallized mineral clasts, except for two lithic clasts. These are Emery and Vaca Muerta, and both are shock-modified olivine orthopyroxenites. Fine-grained coronas surround olivine, except for those in impact-melt group mesosiderites and those without tridymite in their matrices. Coronas consist largely of orthopyroxene, plagioclase, clinopyroxene, chromite, merillite, and ilmenite, and are similar to the matrix, but lack metal and tridymite. Texturally the innermost parts of the corona can be divided into three stages of development: (1) radiating acicular, (2) intermediate, and (3) granular.

Nehru, C. E.↗

The Structure and Properties of Diffusion Assisted Bonded Joints in 17-4 PH, Type 347, 15-5 PH and Nitronic 40 Stainless Steels

Diffusion assisted bonds are formed in 17-4 PH, 15-5 PH, type 347 and Nitronic 40 stainless steels using electrodeposited copper as the bonding agent. The bonds are analyzed by conventional metallographic, electron microprobe analysis, and scanning electron microscopic techniques as well as Charpy V-notch impact tests at temperatures of 77 and 300 K. Results are discussed in terms of a postulated model for the bonding process.

Wigley, D. A.↗

Si-rich Fe-Ni grains in highly unequilibrated chondrites

Consideration is given to the Si contents of Fe-Ni grains in highly unequilibrated chondrites, which have undergone little metamorphosis and thus best preserve the record of processes in the solar nebula. Electron microprobe determinations of silicon content in grains of the Bishunpur chondrite are presented for the six Si-bearing Fe-Ni grains for which data could be obtained, five of which were found to be embedded in olivine chondrules. In addition, all grains are found to be Cr-rich, with Cr increased in concentration towards the grain edge, and to be encased in FeS shells which evidently preserved the Si that entered the FeNi at higher temperatures. A mechanism for the production of Si-bearing metal during the condensation of the cooling solar nebula is proposed which considers the metal to have condensed heterogeneously while the mafic silicates condensed homogeneously with amounts of required undercooling in the low-pressure regions where ordinary and carbonaceous chondrites formed, resulting in Si mole fractions of 0.003 at nebular pressures less than 0.000001 atm.

Rambaldi, E. R.↗

The composition of mesosiderite olivine clasts and implications for the origin of pallasites

The composition of olivine clasts from the mesosiderites Emery, Mincy and Pinnaroo is investigated, and implications of the results for the origin of the pallasites, which, although chemically distinct, may be related to the diogenites, eucrites, howardites and mesosiderites, are discussed. Centimeter-sized olivines were analyzed by electron microprobe, and instrumental neutron activation analysis was performed on one olivine each from Emery and Pinnaroo and an olivine separate from the Brenham pallasite. The olivine compositions are found to range from Fa8 to Fa28, with Emery samples having values from Fa18 to Fa28, and to require essentially total melting of a source composition rich enough in FeO to produce basaltic clasts. It is argued that the mesosiderite olivines were formed in the outer few kilometers of their parent body, as were those of the pallasites, which have the same compositions as the mesosiderite olivines. A model is then developed for the origin of the pallasites as a by-product of igneous differentiation in the external heating of a chondritic parent body.

Mittlefehldt, D. W.↗

The matrices of unequilibrated ordinary chondrites - Implications for the origin and history of chondrites

The matrices of 16 unequilibrated chondrites were examined by optical microscopy, an electron microprobe, and a scanning electron microscope. The fine-grained, opaque, silicate matrix of type 3 unequilibrated chondrites was compositionally, mineralogically, and texturally different from the chondrules and their fragments; it may be the low temperature condensate proposed by Larimer and Anders (1967, 1970). Each meteorite has been metamorphosed by a combination of processes including thermal metamorphism and the passage of shock waves; the appearance of each chondrite results from the temperature and pressure conditions which formed it, and subsequent metamorphic alterations.

Huss, G. R.↗

Petrology of 60035 - Evolution of a polymict ANT breccia

Extensive analysis of the lunar rock sample 60035 with optical microscopy and electron microprobe methods show it to be a polymict ANT breccia partly coated with glass, containing abundant clasts which have troctolitic/noritic anorthosite compositions. At least two episodes of crushing and mixing were involved in the petrogenesis of 60035, and annealing and mineral equilibration have not been extensive since the formation of the breccia.

Warner, R. D.↗

Genesis of highland basalt breccias - A view from 66095

Electron microprobe and defocused beam analyses of the lunar highland breccia sample 66095 show it consists of a fine-grained subophitic matrix containing a variety of mineral and lithic clasts, such as intergranular and cataclastic ANT, shocked and unshocked plagioclase, and basalts. Consideration of the chemistries of both matrix and clasts provides a basis for a qualitative three-component mixing model consisting of an ANT plutonic complex, a Fra Mauro basalt, and minor meteoric material.

Garrison, J. R., Jr.↗

The mineralogy and the isotopic composition of sulfur in hydrothermal sulfide/sulfate deposits on the East Pacific Rise, 21 deg N latitude

The mineralogy and isotopic composition of sulfur found in hydrothermal deposits associated with five groups of vents along the ridge axis of the East Pacific Rise near 21 deg N latitude are investigated. Solid samples of mixed sulfides and sulfates from mounds, chimneys and the surrounding sediment as well as fresh basaltic glass were examined with a portable X-ray fluorescence spectrometer and by scanning electron microscopy, X-ray diffractometry, and electron microprobe analysis. For the three vents of exit temperature close to 350 C, the chimneys are found to be rich in copper sulfides, while for those of temperatures around 300 C, zinc sulfide is found to predominate. The major sulfides found in the chimneys include wurtzite, chalcopyrite, pyrite and cubanite, with anhydrite the dominant sulfate. Significant mineralogical differences are found between active and inactive vents. The isotopic composition of sulfur in anhydrites from active vents is observed to be close to that of sea water and consistent with a derivation from sea water sulfate. The isotopic composition of sulfur in the sulfide minerals is explained in terms of precipitation from solutions with reduced sulfur derived from basalts or basaltic magmas, and sea water sulfate. Finally, the deposits are interpreted as the results of the mixing of H2S-dominated hydrothermal fluids with cold sea water near the sea floor.

Styrt, M. M.↗

Metal and associated phases in Bishunpur, a highly unequilibrated ordinary chondrite

Bishunpur is one of the most unequilibrated ordinary chondrites, and preserves a relatively unaltered record of solar nebular processes. A survey of three polished thin sections of Bishunpur revealed that metal occurs in three textural domains: (1) in the matrix, (2) within chondrules and (3) in coatings on chondrules. A table provides a textural classification of the various metal types found in Bishunpur and their composition. Electron-microprobe analyses are discussed, and similarities between Bishunpur metal and opaques and those in carbonaceous chondrites are considered. Attention is given to low-Ni kamacite grains in chondrule olivine, Si-bearing chondrule metal, spheroidal metal in chondrules, metal and sulfide-bearing rims, coarse matrix metal, and fine matrix metal formation.

Rambaldi, E. R.↗

Moving-Surface Follower Aids Microsurgery

Novel manipulator follows movements of arteries and muscles, enabling precise placement of probe or other microsurgical tool in moving tissue. Microprobe assembly is mounted on output of pneumatic servo of commercial noncontracting thickness gage. Pulsations of tissue surface to be penetrated by probe are sensed by gage and followed by servo, eliminating relative motion between tissue and probe.

Feldstein, C.↗