Search NASA⌕ Search

SEARCH · Search NASA

Results for “Morphology control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Automation of Nanoparticle Synthesis Processes in a Plasma Environment Using LabVIEW

This work presents an automated control system for the synthesis of nanomaterials by plasma-enhanced chemical vapor deposition (PECVD), implemented using the LabVIEW software environment. The main objective of the study is to develop an integrated hardware-software platform that enables sequential control of the key stages of the PECVD process, including vacuum chamber preparation, pressure monitoring, working gas supply, plasma ignition, power matching, cyclic nanomaterial growth, and optical monitoring of nanoparticles in the plasma environment. The use of LabVIEW made it possible to integrate actuator control, experimental parameter acquisition, and realtime process visualization within a single automated system. The automated cycle begins with evacuation of the reaction chamber to a predefined base pressure. Transition to the next stage is permitted only after the specified pressure threshold has been reached, ensuring reproducible initial conditions for each experiment. The program then controls the supply of the working gas through mass flow controllers (MFCs). In this work, two gas-flow control modes were considered: analog control using a 0-5 V voltage signal and digital communication via RS-232 interface. It was shown that the analog approach requires accurate scaling of the control voltage, since applying 5 V corresponds to full-scale opening of the controller and results in the maximum gas flow. In contrast, the RS232 interface enables the gas flow rate to be specified directly in sccm, improving the accuracy, flexibility, and convenience of gas-environment control. After pressure stabilization, LabVIEW initiates RF plasma ignition and executes the RF matching algorithm aimed at minimizing reflected power and improving the stability of the plasma process. A separate software module implements the cyclic nanomaterial growth mode, in which the plasma-on time, plasma duration, and total number of synthesis cycles are predefined. This approach makes it possible to control material accumulation on the substrate and to correlate the process parameters with the morphological characteristics of the resulting nanostructures. The final module of the system is designed for optical monitoring of the nanoparticle cloud density in dusty plasma. For this purpose, the change in the intensity of laser radiation passing through the plasma region is recorded using a photodetector and a Keithley 2401 measuring unit connected to LabVIEW via RS-232 interface. The difference between the initial and modified optical signal intensity is used as a diagnostic parameter characterizing the formation and temporal evolution of nanoparticles. The developed system demonstrates that LabVIEW can be effectively applied not only for the automation of individual instruments, but also for the implementation of a complete digital control cycle for PECVD-based nanomaterial synthesis.

PECVD↗
DOE OSTI2024

Unveiling Morphology and Crystallinity Dynamics in Ni x Mn 1– x CO 3 Cathode Precursors through Batch-Mode Coprecipitation

This study delves into the synthesis and control of Ni x Mn 1–x CO 3 , a critical class of Mn-rich, Co-free precursors vital for cathode-oxide materials in energy storage and conversion technologies. Employing batch-mode coprecipitation, we systematically generated samples with varying Ni concentrations (x = 0, 0.1, 0.3, 0.5, 0.7, and 0.9) and conducted a comprehensive analysis of their compositions, crystallinities, transition-metal distributions, and particle morphologies through both experimental and computational methods. A significant variation in particle size and crystallinity was observed, contingent on the Ni content. Further, a pivotal transition emerged at Ni concentrations above x = ~0.5, transforming uniform morphologies, such as spherical, monodisperse, pseudo-single-crystalline particles, into bimodal, polycrystalline structures. Furthermore, the study highlights the role of Ni–ammonia complexes leading to Ni-deficient precipitates and underscores the importance of ammonia concentration in achieving precise Ni content control. This study unveils critical reaction conditions governing Mn-rich precursor properties that are vital for cathode-oxides, emphasizing the need for meticulous synthetic control and offering the potential for practical applications in advanced energy storage and conversion systems.

25 ENERGY STORAGE↗
DOE OSTI2023

A combination interferometric and morphological image processing approach to rapid quality assessment of additively manufactured cellular truss core components

Advanced manufacturing (AM) processes such as laser powder bed fusion (LPBF) are increasingly capable of fabricating components with useful and unprecedented mechanical properties by incorporating complex internal bracing structures. From the standpoint of quality control and assessment, however, internally complex assemblies present significant build-verification challenges. Here we propose a hybrid approach to the inspection involving the application of computer-aided speckle interferometry (CASI) and morphological image processing as a rapid, inexpensive, and facile method for AM quality control. The described methodology has low capital equipment costs, is full-field and non-contact, can be used in an industrial setting, and has very low requirements in terms of operator training and expertise. Consisting primarily of the combination of image processing software with a simple optical system of variable sensitivity, the method is shown to be effective for inspection of a titanium honeycomb component subjected to differential pressure. Results are compared to those achieved with computed tomography (CT), immersion ultrasound testing (UT), and optical holographic interferometry. Here we propose several possible processing strategies for automated quality assessment based on this powerful hybrid approach.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Focused Electron Beam-Based 3D Nanoprinting for Scanning Probe Microscopy: A Review

Scanning probe microscopy (SPM) has become an essential surface characterization technique in research and development. By concept, SPM performance crucially depends on the quality of the nano-probe element, in particular, the apex radius. Now, with the development of advanced SPM modes beyond morphology mapping, new challenges have emerged regarding the design, morphology, function, and reliability of nano-probes. To tackle these challenges, versatile fabrication methods for precise nano-fabrication are needed. Aside from well-established technologies for SPM nano-probe fabrication, focused electron beam-induced deposition (FEBID) has become increasingly relevant in recent years, with the demonstration of controlled 3D nanoscale deposition and tailored deposit chemistry. Moreover, FEBID is compatible with practically any given surface morphology. In this review article, we introduce the technology, with a focus on the most relevant demands (shapes, feature size, materials and functionalities, substrate demands, and scalability), discuss the opportunities and challenges, and rationalize how those can be useful for advanced SPM applications. As will be shown, FEBID is an ideal tool for fabrication/modification and rapid prototyping of SPM-tipswith the potential to scale up industrially relevant manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Dynamic Motions of Topological Defects in Nematic Liquid Crystals under Spatial Confinement

Abstract Topological defects (TDs) have become a sensational topic due to their significant influence on the unusual optical and physiochemical characteristics of the material. To facilitate their application across a wide range of disciplines it is desirable to analyze and gain fundamental understanding of TDs in both equilibrium and nonequilibrium systems. Liquid crystals (LCs) are considered an ideal system for study given the direct visualization of TDs and a straightforward analyzation process. In addition to the equilibrium morphology of LC TDs, it is also of great interest to track and control the formation and annihilation of defects during thermodynamic processes. However, controlling the dynamic behavior of formed defects remains a challenge. Here, nematic LCs confined in a cell exhibiting surfaces with periodic anchoring conditions containing surface topography are relied on. The effects of patterned surface characteristics such as width, periodicity, and degree of curvature on defects dynamic motion, stabilization, and annihilation are explored. The computational experiments recapitulate the TDs transition path and provide free energy‐based predictions of critical distances for defect annihilation. Taken together, this simple approach offers a promising opportunity to control the dynamics of TDs in LCs through chemical patterned surfaces with topography.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advancing the Performance of Lithium-Rich Oxides in Concert with Inherent Complexities: Domain-Selective Substitutions

Historically, modifications to Li- and Mn-rich (LMR) cathodes have been studied in relation to their efficacy in solving challenges such as oxygen loss and voltage fade, which are inherent to the activation process of these electrodes. However, even in the presence of these phenomena, well-optimized LMR cathodes show considerable promise as earth-abundant options, particularly if other barriers to implementation can be overcome or mitigated. As the complex mechanisms of LMR electrodes are known to stem from the local, chemical inhomogeneities that define the nanocomposite domain nature of these oxides, strategies aimed at manipulating the performance of activated electrodes, irrespective of voltage fade, through domain-selective modifications, could prove instructive. In this work, we use a novel synthesis process aimed at influencing the site occupancy of substituted Sn 4+ , as an example 4+ cation, into a Co-free Li 1.13 Mn 0.57(1–x) Sn 0.57x Ni 0.3 O 2 LMR oxide. We show that Sn 4+ can be selectively substituted into Li-rich environments. The consequences are revealed to be both chemical and morphological, and the domain-selective doping strategy provides a knob for directed control of the low state-of-charge impedance behavior. In conclusion, these results reveal new clues and insights with respect to further advancing the practical relevance of LMR cathode particles and electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hydrobiogeochemical Controls on the Delivery of Dissolved Organic Matter to Boreal Headwater Streams

Understanding controls on the delivery of dissolved organic matter (DOM) from terrestrial to aquatic systems is key for constraining carbon balances and fluxes in boreal headwater catchments. The largest export of DOM generally occurs during intense periods of water delivery to the landscape (e.g., rain events); however, the timing and magnitude of DOM is complicated by geomorphological, hydrometeorological, and biogeochemical variability. To better assess mechanisms controlling the delivery of DOM to boreal streams, DOM was investigated in two morphologically distinct catchments of an experimental forest watershed in western Newfoundland, one dominated by low relief wetlands and the other by steep hillslopes. The DOM was compared during two fall storms of similar magnitude but contrasting moisture conditions during the autumn transition. Variable concentrations and optical character highlighted antecedent conditions are important for the delivery of DOM to boreal streams. Concentration-discharge relationships with stream hydrograph separation analysis suggest preferential flowpaths through shallow mineral horizons as a key pathway for delivery of DOM in the hillslope dominated catchment compared to rapid input from near-stream wetlands in the low relief catchment. Loss of DOM via preferential pathways suggests an additional mechanism for surface soil carbon loss not directly informed by lateral flow and soil hydrology, which has important implications for our conceptualization and modeling of carbon fluxes in boreal systems. These results suggest watershed scale responses of DOM in boreal headwater catchments are complex, and better linkages between catchment scale hydrology and landscape hydrobiogeochemistry are required to constrain terrestrial to aquatic carbon fluxes in boreal landscapes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Evolution of micro-pores in Ni–Cr alloys via molten salt dealloying

Porous materials with high specific surface area, high porosity, and high electrical conductivity are promising materials for functional applications, including catalysis, sensing, and energy storage. Molten salt dealloying was recently demonstrated in microwires as an alternative method to fabricate porous structures. The method takes advantage of the selective dissolution process introduced by impurities often observed in molten salt corrosion. This work further investigates molten salt dealloying in bulk Ni–20Cr alloy in both KCl–MgCl 2 and KCl–NaCl salts at 700 °C, using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction (XRD), as well as synchrotron X-ray nano-tomography. Micro-sized pores with irregular shapes and sizes ranging from sub-micron to several microns and ligaments formed during the process, while the molten salt dealloying was found to progress several microns into the bulk materials within 1–16 h, a relatively short reaction time, enhancing the practicality of using the method for synthesis. The ligament size increased from ~ 0.7 μm to ~ 1.3 μm in KCl–MgCl 2 from 1 to 16 h due to coarsening, while remaining ~ 0.4 μm in KCl–NaCl during 16 h of exposure. The XRD analysis shows that the corrosion occurred primarily near the surface of the bulk sample, and Cr 2 O 3 was identified as a corrosion product when the reaction was conducted in an air environment (controlled amount sealed in capillaries); thus surface oxides are likely to slow the morphological coarsening rate by hindering the surface diffusion in the dealloyed structure. 3D-connected pores and grain boundary corrosion were visualized by synchrotron X-ray nano-tomography. This study provides insights into the morphological and chemical evolution of molten salt dealloying in bulk materials, with a connection to molten salt corrosion concerns in the design of next-generation nuclear and solar energy power plants.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Rapid manufacturing of tailored preforms

A method for rapid manufacturing of three dimensional discontinuous fiber preforms is provided. The method includes the deposition of a polymeric material containing fibers on a surface to form a tailored charge for compression molding. The reinforced polymeric material may be a thermoplastic or a reactive polymer with viscosity low enough to allow flow through an orifice during deposition, yet high enough zero shear viscosity to retain the approximate shape of the deposited charge. The material can be deposited in a predetermined pattern to induce the desired mechanical properties through alignment of the fibers. This deposition can be performed in a single layer or in multiple layers. The alignment is achieved passively by shear alignment of the fibers or actively through fiber orientation control or mixing. The fibers can be of the desired material, length, and morphology, including short and long filaments.

Kunc, Vlastimil↗
DOE OSTI2024

Dynamic response of nanosecond repetitively pulsed discharges to combustion dynamics: regime transitions driven by flame oscillations

Abstract When using nanosecond repetitively pulsed discharges to actuate on dynamic combustion instabilities, the environment the discharge is created in is unsteady and changing on the timescale of the combustion processes. As a result, individual discharge pulses are triggered in a background gas that evolves at the timescale of combustion dynamics, and pulse-to-pulse variations may be observed during the instability cycle. Prior work has studied nanosecond pulsed discharges in pin-to-ring configurations used to control instabilities in lean-operating swirl-stabilized combustors, and observed variable discharge behavior. The focus of this work is on characterizing how the pulse-to-pulse discharge morphology, energy deposition, and actuation authority, evolve during the combustion instability cycle. This has important implications for designing effective plasma-assisted combustion control schemes. The discharge is observed in two distinct modes, a streamer corona and a nanosecond spark, with the occurrence of each regime directly linked to the phase of the combustor instability. Variation of pulse repetition frequency affects the total fraction of pulses in each mode, while variation of voltage affects the onset of the nanosecond spark mode. The transitions are described in terms of ratios of the relevant combustion and plasma timescales and the implications of this coupled interaction on the design of an effective control scheme is discussed.

Physics↗
DOE OSTI2021

Chemically controlled pattern formation in self-oscillating elastic shells

Significance Mechanochemical processes drive various biological functions including morphogenesis and morphological changes in responsive synthetic hydrogels. By allowing reactive components to function in an elastic closed shell, autonomous chemical reactions generate microcompartments capable of expanding or contracting or induce buckled patterns. This capability can drive specific functions such as enhancing the rate of diffusion of compartmentalized chemicals or releasing cargos at specific rates. Here, we demonstrate the coupling of mechanical response to autonomous chemical reactions in elastic shells which swell and deswell to generate specific dynamic patterns and morphologies. The reverse feedback from the mechanical input triggers the chemical reaction. Our work inspires the design of responsive shells to enhance the functionality of microcompartments and nanoreactors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

One–Step Fabrication of Nanocrystalline Nanonetwork SnO 2 Gas Sensors by Integrated Multilaser Processing

An integrated multilaser process is developed to fabricate nanocrystalline nanonetwork SnO 2 gas sensors in one integrated procedure, which combines electrodes fabrication, nanomaterials deposition, and postannealing. Interdigit electrodes are fabricated on an Au-coated fused silica substrate using a picosecond (ps) laser, which ablates the Au coating from the back of the substrate to pattern the electrodes. A novel transmitted Ps laser deposition (TPLD) process is designed to deposit SnO 2 nanonetwork on the interdigit electrodes with precise deposition area control under a close target-to-substrate distance. The obtained SnO 2 nanonetwork is in situ postannealed by a CO 2 laser to improve the crystallinity, while the nano morphology and grain size keep intact. To investigate the morphology and formation process of the nanonetwork, the microstructure of the laser-deposited SnO 2 layer is characterized. As a result, the crystallization control of CO 2 laser annealing is investigated through analyzing the Raman spectrum, X-ray diffraction (XRD) patterns, and lattice structures of the samples. By exposed to H 2 atmosphere, the fabricated gas sensor is demonstrated for H 2 monitoring.

08 HYDROGEN↗
DOE OSTI2020

Atomic force microscopy: Emerging illuminated and operando techniques for solar fuel research

Integrated photoelectrochemical devices rely on the synergy between components to efficiently generate sustainable fuels from sunlight. The micro- and/or nanoscale characteristics of the components and their interfaces often control critical processes of the device, such as charge-carrier generation, electron and ion transport, surface potentials, and electrocatalysis. Understanding the spatial properties and structure–property relationships of these components can provide insight into designing scalable and efficient solar fuel components and systems. These processes can be probed ex situ or in situ with nanometer-scale spatial resolution using emerging scanning-probe techniques based on atomic force microscopy (AFM). In this Perspective, we summarize recent developments of AFM-based techniques relevant to solar fuel research. We review recent progress in AFM for (1) steady-state and dynamic light-induced surface photovoltage measurements; (2) nanoelectrical conductive measurements to resolve charge-carrier heterogeneity and junction energetics; (3) operando investigations of morphological changes, as well as surface electrochemical potentials, currents, and photovoltages in liquids. Opportunities for research covered here include: (1) control of ambient conditions for performing AFM measurements; (2) in situ visualization of corrosion and morphological evolution of electrodes; (3) operando AFM techniques to allow nanoscale mapping of local catalytic activities and photo-induced currents and potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

ATRP Enhances Structural Correlations In Polymerization–Induced Phase Separation**

Synthetic methods to control the structure of materials at sub–micron scales are typically based on the self–assembly of structural building blocks with precise size and morphology. On the other hand, many living systems can generate structure across a broad range of length scales in one step directly from macromolecules, using phase separation. Here, we introduce and control structure at the nano– and microscales through polymerization in the solid state, which has the unusual capability of both triggering and arresting phase separation. In particular, we show that atom transfer radical polymerization (ATRP) enables control of nucleation, growth, and stabilization of phase–separated poly–methylmethacrylate (PMMA) domains in a solid polystyrene (PS) matrix. ATRP yields durable nanostructures with low size dispersity and high degrees of structural correlations. Furthermore, we demonstrate that the length scale of these materials is controlled by the synthesis parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effects of a Layered Morphology on Drip Suppression in Burning Polymers

Fire safety in polymers is critically important with products such as textiles and consumer goods, as well as materials used in construction, aerospace, transportation, and furniture. Additives used as anti-dripping and flame-retardant agents impose acute human health issues and have negative environmental impacts. With a focus on developing additive-free solutions, here we used multilayer coextrusion to fabricate layered polyethylene/polypropylene (PE/PP) films and investigated the effect of a layered morphology on dripping and burning rates. The experimental results for multilayered PE/PP samples were compared to control groups of melt blended PE/PP samples. The multilayer configuration provides two significant advantages: 154% delay in the time to the first drip and up to 87% reduction in the number of drips compared to the value for the melt blended samples with no additives. PE/PP blends with up to 2 wt % polytetrafluoroethylene, a commonly used anti-dripping agent in the industry, showed only 85% delay in the time to the first drip and about 60% reduction in the number of drips. We discovered a linear relationship between film thickness and burning rate, which allows for the use of the volumetric burning rate to normalize the effect of film thickness. No benefit in the burning rate was observed when comparing multilayered structures and conventional melt blended architectures or blends with PTFE. Annealing studies and transmission electron microscopy at areas close to the combustion zones confirmed that higher extensional viscosities induced by the layered structures and morphological changes due to the layer breakup play an important role in reducing dripping. By combining the first drip time and overall drip numbers, a parameter, “dripping index”, was defined to establish a fire safety map to simplify material comparisons. This study demonstrates that a multilayer film geometry can provide an additive-free solution to yield control over fire safety parameters in polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Morphology Effects on Free Energies of Proton-Coupled Electron Transfer in Polyoxotungstates

Polyoxotungstates have previously been established to facilitate the hydrogenation of small molecule substrates via hydrogen atom transfer from reactive hydroxyl groups formed at the assembly surface. Understanding structure−function relationships that dictate the thermochemistry and kinetics of protoncoupled electron transfer is key to controlling this chemistry. In this work, we combine comprehensive electrochemical experiments and density functional theory calculations to address how different polyoxotungstate morphologies, specifically W 6 O 19 −2 , W 10 O 32 −4 , SiW 12 O 40 −4 , and P 2 W 18 O 62 −6 , affect the bond dissociation free energies of surface hydroxides (BDFE(O−H)) formed upon reduction of the assembly in acidic media. Our results reveal increasing hydroxide bond strengths with increasing cluster size, and that anisotropic cluster geometries result in substantial thermodynamic differentiation of H-binding sites. We demonstrate an excellent agreement between theory and experiments on the reported BDFE(O−H) values and, importantly, we elucidate how cluster size and shape affect electronic properties (local charges and frontier molecular orbitals), giving rise to sites with increased preference for hydrogen binding, demonstrated in higher BDFE(O−H). Overall, this work aids the understanding and design of polyoxometalates exhibiting surface sites with tailored interaction strengths.

anions↗
DOE OSTI2024

What Controls Crystal Diversity and Microphysical Variability in Cirrus Clouds?

Abstract Variability of ice microphysical properties like crystal size and density in cirrus clouds is important for climate through its impact on radiative forcing, but challenging to represent in models. For the first time, recent laboratory experiments of particle growth (tied to crystal morphology via deposition density) are combined with a state‐of‐the‐art Lagrangian particle‐based microphysics model in large‐eddy simulations to examine sources of microphysical variability in cirrus. Simulated particle size distributions compare well against balloon‐borne observations. Overall, microphysical variability is dominated by variability in the particles' thermodynamic histories. However, diversity in crystal morphology notably increases spatial variability of mean particle size and density, especially at mid‐levels in the cloud. Little correlation between instantaneous crystal properties and supersaturation occurs even though the modeled particle morphology is directly tied to supersaturation based on laboratory measurements. Thus, the individual thermodynamic paths of each particle, not the instantaneous conditions, control the evolution of particle properties.

54 ENVIRONMENTAL SCIENCES↗