Search NASA⌕ Search

SEARCH · Search NASA

Results for “NH3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Ammonia synthesis by photocatalytic hydrogenation of a N 2 -derived molybdenum nitride

Although metal complexes are known to split dinitrogen at ambient temperature and pressure, the synthesis of ammonia from these compounds and using H 2 as the terminal reductant has been rarely achieved. Here, we report photocatalytic ammonia synthesis from a N 2 -derived terminal molybdenum nitride and by using H 2 as the terminal reductant. An iridium hydride photocatalyst mediates the reaction upon irradiation with blue light. A molybdenum pentahydride was identified as the principal metal product arising following ammonia release. Conversion of the molybdenum pentahydride back to the terminal molybdenum nitride was accomplished in three-steps and completes a synthetic cycle for NH3 formation from N 2 and H 2 . Mechanistic investigations support a pathway involving photoexcitation of the iridium hydride and subsequent energy transfer rather than electron transfer. Deuterium labelling confirmed H 2 as the source of the N–H bonds. This photodriven, proton coupled electron transfer allows the use of H 2 as the terminal reductant for catalytic formation of NH 3 from N 2 using metal catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quasi-operando quantification of Cu(ii) ions in Cu-SSZ-13 catalyst by an NH 3 temperature-programmed reduction method

In this work, a quasi-operando NH3 temperature-programmed reduction method (NH 3 -TPR), with N 2 :Cu = 1:1, is developed to quantify total Cu(II) ions in Cu-SSZ-13 quenched from SCR-relevant reactions, and its accuracy is confirmed by in situ EPR. [Cu(OH)] + -Z and Cu 2+ -2Z can be further distinguished by NH 3 reduction temperatures, and their different reducibility in SCR is revealed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

EXAFS investigations of temperature-dependent structure in cobalt-59 molecular NMR thermometers

Cobalt-59 nuclei are known for extremely thermally sensitive chemical shifts (δ), which in the long term could yield novel magnetic resonance thermometers for bioimaging applications. In this manuscript, we apply extended X-ray absorption fine structure (EXAFS) spectroscopy for the first time to probe the exact variations in physical structure that produce the exceptional thermal sensitivity of the 59 Co NMR chemical shift. We apply this spectroscopic technique to five Co(III) complexes: [Co(NH3)6]Cl3 (1), [Co(en) 3 ]Cl 3 (2) (en = ethylenediamine), [Co(tn) 3 ]Cl 3 (3) (tn = trimethylenediamine), [Co(tame) 2 ]Cl 3 (4) (tame = 1,1,1-tris(aminomethyl)ethane), and [Co(diNOsar)]Cl 3 (5) (diNOsar = dinitrosarcophagine). The solution-phase EXAFS data reveal increasing Co–N bond distances for these aqueous complexes over a ~50 °C temperature window, expanding by Δr (Co–N) = 0.0256(6) Å, 0.0020(5) Å, 0.0084(5) Å, 0.0006(5) Å, and 0.0075(6) Å for 1–5, respectively. Computational analyses of the structural changes reveal that increased connectivity between the donor atoms encourages complex structural variations. Finally, these results imply that rich temperature-dependent structural variations define 59 Co NMR thermometry in macrocyclic complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ammonia synthesis on BaTiO 2.5 H 0.5 : computational insights into the role of hydrides

Perovskite oxyhydrides such as BaTiO 2.5 H 0.5 have been found to be able to catalyze NH3 synthesis, but the mechanism and the role of the catalyst's lattice hydrides in the catalytic reaction remain unknown. Here we employ first principles density functional theory to investigate the mechanism of ammonia synthesis and the role of lattice hydrides on a prototypical perovskite oxyhydride, BaTiO 2.5 H 0.5 (BTOH). Two mechanistic hypotheses, the distal and alternating pathways, have been tested on the Ti2O 2 termination of the BTOH (210) surface, previously determined to be the most stable surface termination under the reaction conditions considered. In the distal pathway, H atoms hydrogenate N 2 to form the *N–NH x key intermediates, followed by N–N bond breaking. In the alternating pathway, H atoms hydrogenate N 2 in an alternating fashion to form the *NH x –NH y intermediates before N–N bond breaking and formation of co-adsorbed *NH x /*NH y on the surface. We find that the subsurface hydride vacancy formed after reaction of *N 2 with the lattice hydride is key to the distal pathway, leading to surface nitride formation after breaking the *N–NH 3 bond, while the neighboring surface Ti sites are key to bridging and stabilizing the *NNH intermediate in the alternating pathway. In both pathways, desorption of NH 3 is the most uphill in energy. Our results provide important insights into the role of hydrides and surface vacancies in hydrogenation reactions over BTOH, which will be useful to guide future spectroscopic experiments such as operando IR and inelastic neutron scattering to verify the key intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Vertical detachment energies of ammonia cluster anions using self-interaction-corrected methods

Systems with weakly bound extra electrons impose great challenges to semilocal density functional approximations (DFAs), which suffer from self-interaction errors. Small ammonia clusters are one such example of weakly bound anions where the extra electron is weakly bound. We applied two self-interaction correction (SIC) schemes, viz., the well-known Perdew–Zunger and the recently developed locally scaled SIC (LSIC) with the local spin density approximation (LSDA), Perdew–Burke–Ernzerhof (PBE) generalized gradient approximation (GGA), and the SCAN meta-GGA functionals to calculate the vertical detachment energies (VDEs) of small ammonia cluster anions (NH3)n–. Our results show that the LSIC significantly reduces the errors in calculations of VDE with LSDA and PBE-GGA functionals leading to better agreement with the reference values calculated with coupled cluster singles and doubles with perturbative triples [CCSD(T)]. Accurate prediction of VDE as an absolute of the highest occupied molecular orbital (HOMO) is challenging for DFAs. Our results show that VDEs estimated from the negative of HOMO eigenvalues with the LSIC-LSDA and Perdew–Zunger SIC-PBE are within 11 meV of the reference CCSD(T) results. Here, the LSIC method performs consistently well for the VDE estimates, from both the total energy differences and the absolute HOMO eigenvalues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dynamic and relativistic effects on Pt–Pt indirect spin–spin coupling in aqueous solution studied by ab initio molecular dynamics and two- vs four-component density functional NMR calculations

Treating 195Pt nuclear magnetic resonance parameters in solution remains a considerable challenge from a quantum chemistry point of view, requiring a high level of theory that simultaneously takes into account the relativistic effects, the dynamic treatment of the solvent–solute system, and the dynamic electron correlation. A combination of Car-Parrinello molecular dynamics (CPMD) and relativistic calculations based on two-component zeroth order regular approximation spin–orbit Kohn–Sham (2c-ZKS) and four-component Dirac–Kohn–Sham (4c-DKS) Hamiltonians is performed to address the solvent effect (water) on the conformational changes and JPtPt1 coupling. A series of bridged PtIII dinuclear complexes [L1–Pt2(NH3)4(Am)2–L2]n+ (Am = α–pyrrolidonate and pivalamidate; L = H2O, Cl−, and Br−) are studied. The computed Pt–Pt coupling is strongly dependent on the conformational dynamics of the complexes, which, in turn, is correlated with the trans influence among axial ligands and with the angle N–C–O from the bridging ligands. The J-coupling is decomposed in terms of dynamic contributions. The decomposition reveals that the vibrational and explicit solvation contributions reduce JPtPt1 of diaquo complexes (L1 = L2 = H2O) in comparison to the static gas-phase magnitude, whereas the implicit solvation and bulk contributions correspond to an increase in JPtPt1 in dihalo (L1 = L2 = X−) and aquahalo (L1 = H2O; L2 = X−) complexes. Relativistic treatment combined with CPMD shows that the 2c-ZKS Hamiltonian performs as well as 4c-DKS for the JPtPt1 coupling.

Chemistry↗
DOE OSTI2021

van der Waals corrected density functionals for cylindrical surfaces: Ammonia and nitrogen dioxide adsorbed on a single-walled carbon nanotube

In this work, we extend the damped Zaremba-Kohn model (dZK) for long-range dispersion interaction between a molecule and a planar surface to molecules adsorbed on a curved cylindrical surface, and employ this extended model as an additive correction to the semilocal density functionals PBE (Perdew-Burke-Ernzerhof) and SCAN (strongly constrained and appropriately normed). The resulting PBE+vdW (van der Waals)-dZK and SCAN+vdW-dZK are applied to two systems, NH3 and NO2 molecules adsorbed on a single-wall carbon nanotube (CNT), for calculations of binding energies and equilibrium distances. For comparison, the results from vdW nonlocal functionals, such as SCAN+rVV10 and PBE+rVV10, are also presented. The binding energies from PBE+rVV10 (Vydrov and Van Voorhis), SCAN+rVV10, PBE+vdW-dZK, and SCAN+vdW-dZK are about 70–115 meV for the system of CNT + NH 3 and 300–500 meV for the system of CNT + NO 2 . The results from PBE+vdW-dZK and SCAN+vdW-dZK are closer to each other than those from PBE+rVV10 and SCAN+rVV10 are. The relatively closer results from PBE+vdW-dZK and SCAN+vdW-dZK indicate the consistency of our developed vdW–dZK model for cylindrical surfaces. All methods, including PBE, SCAN, PBE+rVV10, SCAN+rVV10, PBE+vdW-dZK, and SCAN+vdW-dZK, give approximately the same binding energy differences between two adsorption configurations (types I and II) for the two systems. This implies that the two adsorption sites have approximately the same adsorption stability. The exponent of the vdW interaction power law from our vdW-dZK model for the two systems is about 0 at short distance, largely due to the damping factor, and tends slowly to –4 to –4.5 at distances D about 20–50 Å. At even larger distances, the vdW power-law exponent approaches –5. This feature is very similar to the one calculated with random-phase approximation and renormalization group approaches, supporting the applicability of our methods. Our developed vdW-dZK method provides a highly efficient and reliable method for large systems with cylindrical surfaces, such as vdW interactions with nanotubes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

High-Fuel Loading Ignition Delay Time Characterization of Hydrogen/Natural Gas/Ammonia at Gas Turbine-Relevant Conditions Inside a High-Pressure Shock Tube

Abstract This study explores the combustion characterization of high-fuel percentage, air-diluted mixtures of H2 mixed with natural gas (NG) as well as mixtures of H2 and NH3 at temperatures and pressures relevant to turbine operating conditions (20–30 bar, 1000–1500 K). Lower temperatures (below 1070 K) exhibit preignition characteristics due to non-homogeneity. An attempt to mitigate these occurrences at high pressures is investigated using the constrained reaction volume (CRV) stage-filling technique. Due to the need to further refine the facility CRV stage-filling uncertainty, only higher temperature data will be interpreted at this time. The test conditions in this study closely replicate the temperatures, pressures, and mixtures that would be seen in hydrogen-powered gas turbines, making it the first to explore such conditions. The experimental IDTs were compared against the current state-of-the-art chemical kinetic models for mechanism validation. The current work will advance H2-powered turbines and aims to determine the optimum molecular ratio of H2 when mixed with natural gas.

Pierro, Michael↗
DOE OSTI2023

Hydrogen and Ammonia Blending With Natural Gas: Ignition Delay Times and Chemical Kinetic Model Validation at Gas Turbine Relevant Conditions

Abstract Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000–1500 K near a constant pressure of 25 bar. As mentioned, mixtures were kept undiluted to replicate the same chemistry pathways seen in gas turbine combustion chambers. Recorded combustion pressures exceeded 200 bar due to the large energy release, hence why these were performed at the high-pressure shock tube facility. The data is compared to the predictions of the NUIGMech 1.1 mechanism for chemical kinetic model validation and refinement. An exceptional agreement was shown for stoichiometric conditions in all cases but strayed at lean and rich equivalence ratios, especially in the lower temperature regime of H2 addition and all temperature ranges of the baseline NG mixture. Hydrogen addition also decreased ignition delay times by nearly 90%, while NH3 fuel addition made no noticeable difference in ignition time. NG/NH3 exhibited similar chemistry to pure NG under the same conditions, which is shown in a sensitivity analysis. The reaction CH3 + O2 = CH3O + O is identified and suggested as a possible modification target to improve model performance. Increasing the robustness of chemical kinetic models via experimental validation will directly aid in designing next-generation combustion chambers for use in gas turbines, which in turn will greatly lower global emissions and reduce greenhouse effects.

Pierro, Michael↗
DOE OSTI2025

C60-Based Ionic Salt Electron Shuttle for High-Performance Inverted Perovskite Solar Modules

Although C60 is usually the electron transport layer (ETL) in inverted perovskite solar cells, its molecular nature of C60 leads to weak interfaces that lead to non-ideal interfacial electronic and mechanical degradation. Here, we synthesized an ionic salt from C60, 4-(1',5'-dihydro-1'-methyl-2'H-[5,6] fullereno-C60-Ih-[1,9-c]pyrrol-2'-yl) phenylmethanaminium chloride (CPMAC), and used it as the electron shuttle in inverted PSCs. The CH2-NH3+ head group in the CPMA cation improved the ETL interface and the ionic nature enhanced the packing, leading to ~3-fold increase in the interfacial toughness compared to C60. Using CPMAC, we obtained ~26% power conversion efficiencies (PCEs) with ~2% degradation after 2,100 hours of 1-sun operation at 65degrees C. For minimodules (four subcells, 6 centimeters square), we achieved the PCE of ~23% with <9% degradation after 2,200 hours of operation at 55degrees C.

14 SOLAR ENERGY↗
DOE OSTI2021

Combined Mixed Potential Electrochemical Sensors and Artificial Neural Networks for the Quantificationand Identification of Methane in Natural Gas Emissions Monitoring

Sensors capable of quantifying methane concentration and discriminating between possible sources are needed for natural gas leak detection where multiple spatially overlapping sources including wetlands and agriculture may be present. We report on the fabrication by an additive manufacturing process of a four electrode La 0.87 Sr 0.13 CrO 3 , Indium Tin Oxide (In 2 O 3 90 wt%, SnO 2 10 wt%), Au, Pt mixed potential electrochemical sensor using yttria-stabilized zirconia (YSZ) as a solid electrolyte to natural gas detection. Artificial neural networks (ANNs) are used to automatically decode the possible source and concentration of methane. The ANNs trained on sensor data are capable of correctly discriminating between three sources of methane emissions from simulated mixtures of emissions from cattle, wetlands, or natural gas with >98% accuracy. Quantification error for methane in mixtures of CH 4 in air, CH 4 + NH3 in air, and simulated natural gas is less than 1.5% ppm when a two-temperature dataset is employed.

03 NATURAL GAS↗
DOE OSTI2026

Cation Data for the East River Watershed, Colorado (2014-2025)

This data package contains mean values for cation concentration for water samples taken from the East River Watershed in Colorado. Inductively coupled plasma mass spectrometry (ICP-MS) has been used to measure the concentrations of elements of interest simultaneously for the East River Watershed, Colorado groundwater and surface water samples to inform insights on the biogeochemistry processes within the watershed. The East River is part of the Watershed Function Scientific Focus Area (WFSFA) located in the Upper Colorado River Basin, United States. For samples collected prior to 06-16-2021, the instrumentation, Elan DRC II, PerkinElmer SCIEX, automatically switches among the three models necessary to analyze all 37 elements. These 37 elements include: (1) Lithium (Li), Beryllium (Be), Boron (B), Sodium (Na), Magnesium (Mg), Aluminium (Al), Silicon (Si), Phosphorus (P), Titanium (Ti), Cobalt (Co), Nickel (Ni), Copper (Cu), Zinc (Zn), Germanium (Ge), Arsenic (As), Rubidium (Rb), Strontium (Sr), Zirconium (Zr), Molybdenum (Mo), Silver (Ag), Cadmium (Cd), Tin (Sn), Antimony (Sb), Caesium (Cs), Barium (Ba), Europium (Eu), Lead (Pb), Thorium (Th), Uranium (U) using standard model, argon Ar as reaction gas, (2) Potassium (K), Calcium (Ca), Vanadium (V), Chromium (Cr), Manganese (Mn), Iron (Fe) using dynamic reaction cell (DRC) model, ammonia NH3 as reaction gas, and (3) Phosphorus (P) and Selenium (Se) using DRC model, oxygen O2 as reaction gas. Note for the samples with higher concentrations of chloride (Cl-), asenic (As) concentrations were analysed with DRC model (oxygen O2 as reaction gas) to avoid the interference of chloride. For samples collected on and after 06-16-2021, an advanced Agilent 8900 triple quadrupole inductively coupled plasma mass spectrometry system (Agilent 8900 QQQ ICP-MS, Agilent Technologies) has been used to measure the concentrations of interested 36 elements simultaneously for environmental samples, including (1) Lithium (Li), Beryllium (Be) and Boron (B) using standard no gas mode, (2) Sodium (Na), Magnesium (Mg), Aluminium (Al) Phosphorus (P), Potassium (K), Chromium (Cr), Manganese (Mn), Iron (Fe), Cobalt (Co), Nickel (Ni), Copper (Cu), Zinc (Zn), Germanium (Ge), Arsenic (As), Rubidium (Rb), Strontium (Sr), Zirconium (Zr), Molybdenum (Mo), Silver (Ag), Cadmium (Cd), Tin (Sn), Antimony (Sb), Cesium (Cs), Barium (Ba), Europium (Eu), Lead (Pb), Thorium (Th) and Uranium (U) using standard helium (He) collision mode, (3) Titanium (Ti) and Vanadium (V) using high Energy (HEHe) helium (He) collision mode, and (4) Silicon (Si), Calcium (Ca) and Selenium (Se) using standard H2 reaction mode. All samples were prepared/diluted with 2% (v/v) ultrapure nitric acid in Milli-Q water (18.2 mega ohm-cm), and analyzed under a rigorous quality assurance and quality control (QA/QC) process. This data package contains (1) a zip file (cation_data_2014_2025.zip) containing a total of 5,849 files: 5.848 data files of cation data from across the Lawrence Berkeley National Laboratory (LBNL) Watershed Function Scientific Focus Area (SFA) which is reported in .csv files per location and a locations.csv (1 file) with latitude and longitude for each location; (2) a file-level metadata (v6_20260901_flmd.csv) file that lists each file contained in the dataset with associated metadata; (3) a data dictionary (v6_20260901_dd.csv) file that contains terms/column_headers used throughout the files along with a definition, units, and data type; (4) PDF and docx files for the detemination of Method Detection Limits (MDLs) for ICP-MS PerkinElmer DRC II instrumentation (Detemination_of_Method_Detection_Limits__MDLs__for_ICP_MS__PerkinElmer_Elan_DRC_II__LBL_Bldg74_Lab214D) for samples before November 2021; (5) PDF and docx files for the determination of MDLs for ICP-MS Agilent 8900 QQQ instrumentation (ICP_MS_Analysis_detection_limits_and_QA_QC_WenmingDong_updated_2026-08-06) for samples November 2021 and onward. Missing values within the anion data files are noted as either "-9999" or "0.0" for not detectable (N.D.) data. There are a total of 113 locations containing cation data. Update on 2021-04-11: Added Detemination of Method Detection Limits (MDLs) for ICP-MS document, which can be accessed as a PDF or with Microsoft Word. Update on 2022-06-10: versioned updates to this dataset was made along with these changes: (1) updated cation data for all locations up to 2021-12-31, (2) removal of units from column headers in datafiles, (3) added row underneath headers to contain units of variables, (4) removed suffix and prefix on two variables (“aqberylliumion_asberyllium” and “aqlithiumion_aslithium”), (5) added -9999 for empty numerical cells, and (6) the addition of the file-level metadata (flmd.csv) and data dictionary (dd.csv) were added to comply with the File-Level Metadata Reporting Format. Update on 2022-09-09: Updates were made to reporting format specific files (file-level metadata and data dictionary) to correct swapped file names, add additional details on metadata descriptions on both files, add a header_row column to enable parsing, and add version number and date to file names (v2_20220909_flmd.csv and v2_20220909_dd.csv). Update on 2023-08-08: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-01-05. The file level metadata and data dictionary files were updated to reflect the additional data added. Update on 2024-03-11: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-10-16. Further, revisions to the data files were made to remove incorrect data points (from 1970 and 2001). The reporting format specific files were updated to reflect the additional data added. Updated versions of the PDF and docx files for determination of MDLs for ICP-MS data were added to this dataset for samples starting in November 2021. Update on 2025-05-15: Updates were made to both the data files and reporting format specific files. New available cation data was added, up until the end of WY2024 (September 30, 2024). International Generic Sample Numbers (IGSNs), when registered, were added to the data files. The reporting format specific files were updated to reflect the additional data added. Update on 2026-09-01: Updates were made to both the data files and reporting format specific files. New available cation data was added, up until the end of WY2025 (September 30, 2025). Updated versions, as of 2026-08-06, of the PDF and docx files for determination of MDLs for ICP-MS data were added to this dataset for samples starting in November 2021.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Raw Data published in PeerJ, 2020 for Lower Subalpine needle decomposition field study 2017-2018

This data package contains text files that describe geochemical measurements collected from 2017-2018 during isolated conifer needle decomposition field studies at the Lower Subalpine region of Washington Gulch in Crested Butte, CO. The files within include total carbon and nitrogen (CN) content and fourier-transform infrared spectroscopy (FTIR) results for the initial needles collected in 2016 and after decomposition in October 2018. DI water extractions were conducted with the initial harvested needles in 2016 to determine extractable dissolved organic carbon (DOC), total nitrogen (TN), UV absorbance at 254 nm (UV254), and specific UV absorbance (SUVA). This dataset also includes soil extractable DOC, TN, nitrate, nitrite, ammonium, total organic nitrogen (TON), and pH results from soil collections in 2017. Soil porewater results for DOC, TN, UV254, and SUVA analyses at 15 cm soil depth are also provided from 2017-2018. Gas flux raw data provides CO2, CH4, N2O, and NH3 measurements above needle decomposition over the two study years. Finally, soil samples for microbial DNA extractions were collected from the upper soil depth. This raw data is available in the NCBI SRA database under SRA accession number PRJNA605259. These datasets were generated to investigate the isolated decomposition of spruce and lodgepole conifer needles. The goal of this work was to understand how needle litter impacts terrestrial biogeochemical carbon and nitrogen cycling. Results from this work is detailed in the reference paper "A comparison of lodgepole and spruce needle chemistry impacts on terrestrial biogeochemical processes during isolated needle decomposition. DOI: 10.7717/peerj.9538."

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Raw Data published in PeerJ, 2021 for Crested Butte decomposition field study 2017-2019.

This data package contains text files that describe geochemical measurements collected from 2017-2019 during isolated conifer needle decomposition field studies in Crested Butte, Colorado. The geochemical measurements were collected across three elevations (2,800–3,500 m) ranging from montane to subalpine ecoregions. The data sets within include total carbon and nitrogen content and fourier-transform infrared spectroscopy (FTIR) results for the initial needles collected in 2016 and after decomposition in 2019. Data collection results from August 2020 are also included from when the experimental plots were removed to understand final concentrations of soil extractable carbon and nitrogen content as well as mass balances from litter bag deployments. Soil porewater results are also provided from 2017-2019 for DOC, TN, UV254, and specific UV absorbance (SUVA) analyses at 15 cm soil depth. Gas flux raw data provides CO2, CH4, N2O, and NH3 measurements above needle decomposition over the three study years. Finally, soil samples for microbial DNA extractions were collected from the upper soil depth. This raw data is available in the NCBI SRA database under SRA accession numbers PRJNA605259 and PRJNA715914. These data sets were generated to investigate the isolated decomposition of spruce and lodgepole conifer needles. The goal of this work was to determine the roles of elevation, soil type, seasonal changes in soil moisture, and snowmelt timing on litter decomposition processes. Results from this work are detailed in the reference paper "Effect of elevation, season and accelerated snowmelt on biogeochemical processes during isolated conifer needle litter decomposition. DOI: 10.7717/peerj.11926."

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Materials Data on ZnH12N4(ClO4)2 by Materials Project

Zn(NH3)4(ClO4)2 is Iron carbide-derived structured and crystallizes in the cubic F-43m space group. The structure is zero-dimensional and consists of sixteen ammonia molecules, eight ClO4 clusters, and four zinc molecules. In each ClO4 cluster, O2- is bonded in a single-bond geometry to one Cl1- atom. The O–Cl bond length is 1.46 Å. Cl1- is bonded in a tetrahedral geometry to four equivalent O2- atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on CoH9(CN2)3 by Materials Project

CoCo(NH3)6(CN)6 crystallizes in the trigonal R-3 space group. The structure is zero-dimensional and consists of three azane;cobalt molecules, three cobalt molecules, and eighteen hydrogen cyanide molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on CrCoH18(CN2)6 by Materials Project

CrCo(NH3)6(CN)6 crystallizes in the trigonal R-3 space group. The structure is zero-dimensional and consists of three azane;cobalt molecules, three chrom molecules, and eighteen hydrogen cyanide molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on FeCoH18(NCl)6 by Materials Project

FeCl6Co(NH3)6 is Halite, Rock Salt structured and crystallizes in the cubic Pa-3 space group. The structure is zero-dimensional and consists of four azane;cobalt molecules and four hexachloro iron molecules.

36 MATERIALS SCIENCE↗