Search NASA⌕ Search

SEARCH · Search NASA

Results for “OUTPUT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

An improved push-pull voltage fed converter using a tapped output-filter inductor

A new concept of using a tapped output-filter inductor and an auxiliary commutating diode to reduce the likelihood of transformer core saturation in a push-pull, voltage-fed converter is presented. The linearized circuit model and transfer functions are derived with a hybrid approach using both state-space and circuit averaging. Operation of the new converter - including parasitic effects - is discussed, and a design equation for inductor tap ratio is established. It is predicted and experimentally confirmed that the new converter has more symmetrical transformer core operation, and the potential exits for lower transistor turnon current and reduced transistor voltage stress. These benefits reduce switching loss and enhance transistor reliability.

Wester, G. W.↗
NASA NTRS1982

Characterization of the electrical output of flat-plate photovoltaic arrays

The electric output of flat-plate photovoltaic arrays changes constantly, due primarily to changes in cell temperature and irradiance level. As a result, array loads such as direct-current to alternating-current power conditioners must be able to accommodate widely varying input levels, while maintaining operation at or near the array maximum power point.The results of an extensive computer simulation study that was used to define the parameters necessary for the systematic design of array/power-conditioner interfaces are presented as normalized ratios of power-conditioner parameters to array parameters, to make the results universally applicable to a wide variety of system sizes, sites, and operating modes. The advantages of maximum power tracking and a technique for computing average annual power-conditioner efficiency are discussed.

Gonzalez, C. C.↗
NASA NTRS1982

Output statistics of laser anemometers in sparsely seeded flows

It is noted that until very recently, research on this topic concentrated on the particle arrival statistics and the influence of the optical parameters on them. Little attention has been paid to the influence of subsequent processing on the measurement statistics. There is also controversy over whether the effects of the particle statistics can be measured. It is shown here that some of the confusion derives from a lack of understanding of the experimental parameters that are to be controlled or known. A rigorous framework is presented for examining the measurement statistics of such systems. To provide examples, two problems are then addressed. The first has to do with a sample and hold processor, the second with what is called a saturable processor. The sample and hold processor converts the output to a continuous signal by holding the last reading until a new one is obtained. The saturable system is one where the maximum processable rate is arrived at by the dead time of some unit in the system. At high particle rates, the processed rate is determined through the dead time.

Edwards, R. V.↗
NASA NTRS1984

A K-band GaAs FET amplifier with 8.2-W output power

An 8.2-W GaAs FET amplifier with 38.6 + or - 0.5-dB gain over a 17.7-19.1-GHz frequency band has been developed. This amplifier combines the outputs of eight multistage amplifier modules utilizing a radial combiner. This state-of-the art power level has been achieved with AM/PM of less than 2 deg/dB. The third-order intermodulation products at 1-dB gain compression were 20 dBc, and variation in group delay over the frequency band was less than + or - 0.25 ns. Tests show that the amplifier is unconditionally stable and follows the graceful-degradation principle.

Goel, J.↗
NASA NTRS1984

Two time scale stabilization of systems with output feedback

The problem of constant gain output feedback regulator design for linear systems with ill-conditioned dynamics is considered in the context of singular perturbation theory. A design approach is developed in which gains can be separately calculated to stabilize reduced-order slow and fast subsystem models. By employing the notion of combined control and observation spillover suppression, conditions are derived assuring that these gains will stabilize the full-order system, assuming sufficient frequency separation between the slow and fast subsystems. An LQ design procedure is described in which the spillover suppression conditions are satisfied by adjoining penalty functions to the subsystem performance indices. The theory is demonstrated in a controller design for a flexible space structure.

Moerder, D. D.↗
NASA NTRS1984

Design of an optimal output feedback control system with modal insensitivity

This paper deals with the design of an output feedback controller which results in selected modal insensitivity, and at the same time optimizes a quadratic performance index representative of desired system performance for nominal plant parameter values. The approach taken here is to characterize the class of attainable eigenvectors for a given set of eigenvalues (distinct or non-distinct) which lie in a subspace called the 'Modal Insensitivity Subspace'. A constraint is established on the feedback matrix which results in modal insensitivity. Necessary conditions for optimality subject to the constraint on the feedback matrix are given. This forms the basis for a numerical algorithm to compute the optimal feedback gain which analyzed for convergence. To illustrate the procedure, a design is carried out using the lateral dynamics of an L-1011 aircraft.

Raman, K. V.↗
NASA NTRS1985

High-Output Injection Laser

Terraced double-heterojunction large optical cavity laser features high output in single optical mode. Semiconductor laser consists of body of single-crystal semiconductor material, typically composed of Group III to V compounds in form of rectangular parallelepiped. One of laser end faces partially transparent so that light may be emitted from it. Lateral thickness variation of active and guide layers in semiconductor laser produces confinement of propagating laser beam in lateral direction.

Connolly, J. C.↗
NASA NTRS1985

Stochastic response analysis, order reduction, and output feedback controllers for flexible spacecraft

Real disturbances and real sensors have finite bandwidths. The first objective of this paper is to incorporate this finiteness in the 'open-loop modal cost analysis' as applied to a flexible spacecraft. Analysis based on residue calculus shows that among other factors, significance of a mode depends on the power spectral density of disturbances and the response spectral density of sensors at the modal frequency. The second objective of this article is to compare performances of an optimal and a suboptimal output feedback controller, the latter based on 'minimum error excitation' of Kosut. Both the performances are found to be nearly the same, leading us to favor the latter technique because it entails only linear computations. Our final objective is to detect an instability due to truncated modes by representing them as a multiplicative and an additive perturbation in a nominal transfer function. In an example problem it is found that this procedure leads to a narrow range of permissible controller gains, and that it labels a wrong mode as a cause of instability. A free beam is used to illustrate the analysis in this work.

Hablani, H. B.↗
NASA NTRS1985

Optimal output feedback design of systems with ill-conditioned dynamics

Singular perturbation concepts are exploited to develop a procedure for designing a constant gain, output feedback control system. It is assumed that the original system is ill-conditioned in the sense that the plant contains widely separated dynamics, and that an accurate description for the high frequency behavior may not be available. The design procedure attempts to stabilize the system by minimizing a quadratic cost function made up of the control and states associated with a reduced order (low frequency) model for the plant, and a measure of stability for the neglected fast dynamics. The resulting design procedure does not require knowledge of the fast dynamics.

Calise, A. J.↗
NASA NTRS1985

Throughput comparison of microscope objectives and custom lenses for laser diode output beam collimation

The efficiency with which microscope objectives and custom lenses collimate laser diode emission was measured. Four microscope objectives of 10, 21, 45, and 60 power and two custom lenses of 1 and 0.8 power were used. An autocollimator system was used to measure throughput. It consisted of 1 m focal length lens, a 10 power microscope objective, and a 128-element G series Reticon linear array. Collimating throughput efficiency was defined as the ratio of measured collimated power to total laser output power. Two throughput efficiencies were obtained: one for the didoe operation below lasing and the other for the diode operation above lasing. The custom lenses had higher throughput efficiencies than the microscope objectives. The f/0.8 system provided better throughput efficiencies than the f/1.0 system.

Fuhr, P. L.↗
NASA NTRS1986

Dual-Sampler Processor Digitizes CCD Output

Circuit for processing output of charge-coupled device (CCD) imager provides increased time for analog-to-digital conversion, thereby reducing bandwidth required for video processing. Instead of one sampleand-hold circuit of conventional processor, improved processor includes two sample-and-hold circuits alternated with each other. Dual-sampler processor operates with lower bandwidth and with timing requirements less stringent than those of single-sample processor.

Salomon, P. M.↗
NASA NTRS1986

Extensions to PIFCGT: Multirate output feedback and optimal disturbance suppression

New control synthesis procedures for digital flight control systems were developed. The theoretical developments are the solution to the problem of optimal disturbance suppression in the presence of windshear. Control synthesis is accomplished using a linear quadratic cost function, the command generator tracker for trajectory following and the proportional-integral-filter control structure for practical implementation. Extensions are made to the optimal output feedback algorithm for computing feedback gains so that the multirate and optimal disturbance control designs are computed and compared for the advanced transport operating system (ATOPS). The performance of the designs is demonstrated by closed-loop poles, frequency domain multiinput sigma and eigenvalue plots and detailed nonlinear 6-DOF aircraft simulations in the terminal area in the presence of windshear.

Broussard, J. R.↗
NASA NTRS1986

Combining and connecting linear, multi-input, multi-output subsystem models

The mathematical background for combining and connecting linear, multi-input, multi-output subsystem models into an overall system model is provided. Several examples of subsystem configurations are examined in detail. A description of a MATRIX (sub x) command file to aid in the process of combining and connecting these subsystem models is contained.

Duke, E. L.↗
NASA NTRS1985

Multi-input, multi-output system control for experimental aircraft

Two techniques, direct eigenspace assignment (DEA) and explicit model following (EMF), are used initially to synthesize control laws for the longitudinal dynamics model of a Short Takeoff and Landing (STOL) vehicle in the landing configuration. The vehicle model and the flight control design are presented. The two synthesis techniques are briefly discussed and the handling qualities specifications mapped into the algorithm formulations. The control laws resulting from exercising the algorithms are evaluated in terms of achieved performance and robustness. Since the synthesized control laws involve full state feedback, methodologies were implemented for the control laws using output feedback without adversely affecting performance and robustness. Finally, the salient features of the two design techniques are summarized and the areas that require further investigation are suggested.

Schmidt, D. K.↗
NASA NTRS1985

Michelson interferometer with separated inputs and outputs, double pass, and compensation

A novel configuration is proposed for a Michelson interferometer spectrometer, which will be insensitive to tilts or displacements, and which employs separated inputs and outputs and double passing for higher resolution. The great advantage of such a compensated design is a relaxation of mechanical tolerances, which is especially beneficial for instruments in hostile environments. The Atmospheric Trace Molecule Spectroscopy project, which must work reliably after being subjected to the vibrations of a Space Shuttle launch, would benefit from the use of such an instrument.

Mather, J. C.↗
NASA NTRS1986

Linewidth characteristics of Raman-shifted dye laser output at 720 and 940 nm

Raman conversion efficiency and line broadening are reported for Stokes operation at 720 and 940 nm, with hydrogen and deuterium as the Raman source, and using an Nd:YAG pumped Quanta-Ray PDL-2 dye laser. The dye laser linewidth is 0.2/cm (FWHM) with the grating alone as an intracavity element, and the conversion efficiency at 400 psi was found to be 40 and 20 percent for outputs of 720 and 940 nm, respectively. Pressure broadening coefficients of (9.2 + or - 0.9) x 10 to the -5th per cm/psi for hydrogen, and 7.7 x 10 to the -5th per cm/psi for deuterium, were obtained in good agreement with previous results. The linewidth at the first Stokes wavelength was shown to be determined by pressure broadening in the Raman medium.

Grossmann, B. E.↗
NASA NTRS1986

Linewidth characteristics of Raman-shifted dye laser output at 720 and 940 nm

A compact and simple simultaneous multi-wavelength dye laser cavity was developed for a differential absorption technique. Dielectric multilayer interference filters were inserted inside the cavities as tuning elements, and two types of a DIAL system were constucted by using the dye laser tuned with dielectric multilayer filters to measure NO2 concentration. The usefulness of this dye laser was clarified for the differential absoroption technique in outdoor experiments. Some basic designs of the laser cavity with these filters to get simultaneously multi-wavelength output are summarized.

Grossmann, B. E.↗
NASA NTRS1987

Chandrasekhar equations for infinite dimensional systems. Part 2: Unbounded input and output case

A set of equations known as Chandrasekhar equations arising in the linear quadratic optimal control problem is considered. In this paper, we consider the linear time-invariant system defined in Hilbert spaces involving unbounded input and output operators. For a general class of such systems, the Chandrasekhar equations are derived and the existence, uniqueness, and regularity of the results of their solutions established.

Ito, Kazufumi↗