Search NASA⌕ Search

SEARCH · Search NASA

Results for “OXIDE FILM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electronic Conductivity of Nanoporous Indium Oxide Derived from Sequential Infiltration Synthesis

Sequential infiltration synthesis (SIS) is a vapor phase synthetic method that enables the selective nucleation and growth of metal oxides within polymer volumes. The expanding palette of SIS materials and process designs enables tunability of the resulting material properties. We derive porous indium oxide thin films from the SIS of indium oxide using trimethyl indium and H 2 O 2 in polymethyl methacrylate films and observe the strong effect of SIS and post-deposition processing, which affords 7 orders of magnitude of tunability in electrical resistivity. While as-deposited hybrid nanocomposites show no measurable conductivity, high-temperature treatment in O 2 removes the polymer matrix and creates a porous nanocrystalline In 2 O 3 film with resistivities ranging from 10 3 to 10 5 Ω*cm, with lower resistivity correlated to larger grain sizes. Subsequent annealing in H 2 decreases the resistivity of films to less than 10 –2 Ω*cm. A clear correlation between increasing In 2 O 3 volume fraction, grain size, and carrier mobility is observed, which arises from increased percolation pathways, path length, and contact area in nanocrystalline In 2 O 3 films. Furthermore, this wide tunability demonstrates the importance of understanding growth mechanisms and processing conditions for functional materials development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Adapting an Electron Microscopy Microheater for Correlated and Time-Resolved Ambient Pressure X-ray Photoelectron Spectroscopy

Environmental transmission electron microscopy (ETEM) can follow structural and chemical changes in nanomaterials under reaction conditions, including at temperatures up to 1300 °C and pressures up to ~20 mbar. However, ETEM studies are limited to localized areas of a sample and can benefit from correlative studies of a similar sample on larger length scales. Here, in this work, we describe the customization of a commercial microheater holder used in ETEM to anode-based ambient pressure X-ray photoelectron spectroscopy (APXPS), where chemical and electronic structure information is averaged over several hundred square micrometers. To benchmark heating capabilities in the APXPS instrument, core level binding energies were followed during surface chemical reactions of a Pd film, including CO adsorption–desorption, Pd oxidation, and PdO reduction. The fast heating feature of the microheaters advanced XPS experimental capabilities, including the collection of subsecond time-resolved spectra of the Pd 3d 5/2 peak during the reduction of an oxidized Pd film. The potential to use these heaters in a closed gas cell was also demonstrated by oxidizing Pd in a partial pressure of air locally dosed to the sample surface. General tips and considerations for the application of commercial ETEM heaters to any XPS system with a focused X-ray beam are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Thin film design of amorphous hafnium oxide nanocomposites enabling strong interfacial resistive switching uniformity

A design concept of phase-separated amorphous nanocomposite thin films is presented that realizes interfacial resistive switching (RS) in hafnium-oxide-based devices. The films are formed by incorporating an average of 7% Ba into hafnium oxide during pulsed laser deposition at temperatures ≤400°C. The added Ba prevents the films from crystallizing and leads to ~20-nm-thin films consisting of an amorphous HfO x host matrix interspersed with ~2-nm-wide, ~5-to-10-nm-pitch Ba-rich amorphous nanocolumns penetrating approximately two-thirds through the films. This restricts the RS to an interfacial Schottky-like energy barrier whose magnitude is tuned by ionic migration under an applied electric field. Resulting devices achieve stable cycle-to-cycle, device-to-device, and sample-to-sample reproducibility with a measured switching endurance of ≥10 4 cycles for a memory window ≥10 at switching voltages of ±2 V. Each device can be set to multiple intermediate resistance states, which enables synaptic spike-timing–dependent plasticity. The presented concept unlocks additional design variables for RS devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thickness dependent OER electrocatalysis of epitaxial thin film of high entropy oxide

High entropy oxides (HEOs), which contain multiple elements in the same crystallographic site, are a promising platform for electrocatalysis in oxygen evolution reaction (OER). Investigating these materials in epitaxial thin film form expands the possibility of tuning OER activity by several means, which are not realizable in polycrystalline samples. To date, very few such studies have been reported. In this work, the OER activity of single-crystalline thin films of (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 )NiO 3 , grown on NdGaO 3 substrates have been investigated in 0.1 M KOH electrolyte as a function of film thickness. The OER activity increases with the thickness of the film. X-ray absorption spectroscopy measurements find an increase in Ni $d$-O $p$ covalency and a decrease in charge transfer energy with the increase in film thickness. These facilitate higher charge transfer between Ni and surface adsorbates, increasing OER activity. However, the OER process leads to excessive leaching of thicker films and the OER activity of a 75 unit cell thick film is found to be optimal in the present study. In conclusion, this work demonstrates that the thickness of perovskite oxides can be used as a parameter to enhance OER activity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Review on the growth, properties and applications of self-assembled oxide–metal vertically aligned nanocomposite thin films—current and future perspectives

Self-assembled oxide–metal nanocomposite thin films have aroused great research interest owing to their wide range of functionalities, including metamaterials with plasmonic and hyperbolic optical properties, and ferromagnetic, ferroelectric and multiferroic behaviors. Oxide–metal nanocomposites typically self-assemble as metal particles in an oxide matrix or as a vertically aligned nanocomposite (VAN) with metal nanopillars embedded in an oxide matrix. Among them, the VAN architecture is particularly interesting due to the vertical strain control and highly anisotropic structure, enabling the epitaxial growth of materials with large lattice mismatch. In this review, the driving forces behind the formation of self-assembled oxide–metal VAN structures are discussed. Specifically, an updated in-plane strain compensation model based on the areal strain compensation concept has been proposed in this review, inspired by the prior linear strain compensation model. It provides a guideline for material selection for designing VAN systems, especially those involving complex orientation matching relationships. Based on the model, several case studies are discussed, comparing the microstructure and morphology of different oxide–metal nanocomposites by varying the oxide phase. Specific examples highlighting the coupling between the electrical, magnetic and optical properties are also discussed in the context of oxide–metal nanocomposites. Finally, future research directions and needs are also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Water film-driven Mn (oxy)(hydr)oxide nanocoating growth on rhodochrosite

Minerals exposed to moist air stabilize thin water films that drive a score of chemical reactions of great importance to water-unsaturated terrestrial environments. In this study, we identified Mn (oxy)(hydr)oxide nanocoatings formed by the dissolution, oxidation and precipitation of Mn in oxygenated water films grown on rhodochrosite (MnCO 3 ) microparticles. Nanocoatings that could be identified by vibrational spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and (scanning and transmission) electron microscopy formed in water films containing the equivalent of at least 7 monolayers (~84 H 2 O/nm 2 ). These films were formed by exposing microparticles to moist air with at least 50% relative humidity (RH). Films of neutral pH reacted up to 14% of the Mn II located in the topmost ~5 nm region of the microparticles in atmospheres of up to 90% RH for 7 d. These reactions produced MnOOH, birnessite (MnO 2 ) and hausmannite (Mn 3 O 4 ) nanoparticles of low crystallinity, while exposure to atmospheric air for 1 yr. converted only 2% of Mn II in this region to MnOOH. In contrast, reactions in alkaline water films converted up to ~75% of the Mn II but only after 16 d of reaction. These films produced MnOOH and MnO 2 of low crystallinity, as well as crystalline hausmannite. Kinetic modeling of the time-resolved growth of the Mnsingle bondO stretching vibrational bands of these nanocoatings revealed two concurrent reaction processes. A 1 rst -order process was assigned to nucleation events terminating only after a few hours, and a 0-order process was assigned to the sustained growth of nanocoatings from these nuclei over longer reaction time. By identifying nanocoatings formed by water film-driven reactions on rhodochrosite, our study adds new insight into mineralogical transformations relevant to anoxic–oxic boundaries in water-unsaturated environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1967

Guidance and control research

Cesium vapor heat conduction in thermionic energy converters, space charge distribution in neutral plasma, and titanium oxide thin films

THERMIONIC CONVERTER↗
NASA NTRS1986

Production of pulsed atomic oxygen beams via laser vaporization methods

The generation of energetic pulsed atomic oxygen beams by laser-driven evaporation of cryogenically frozen ozone/oxygen films and thin indium-tin oxide (ITO) films is reported. Mass spectroscopy is used in the mass and energy characterization of beams from the ozone/oxygen films, and a peak flux of 3 x 10 to the 20th/sq m per sec at 10 eV is found. Analysis of the time-of-flight data suggests that several processes contribute to the formation of the oxygen beam. Results show the absence of metastable states such as the 2p(3)3s(1)(5S) level of atomic oxygen blown-off from the ITO films. The present process has application to the study of the oxygen degradation problem of LEO materials.

Brinza, David E.↗
NASA NTRS1995

Experiments On Transparent Conductive Films For Spacecraft

Report describes experiments on thin, transparent, electrically conductive films made, variously, of indium tin oxide covered by magnesium fluoride (ITO/MgF2), aluminum-doped zinc oxide (AZO), or pure zinc oxide (ZnO). Films are candidates for application to such spacecraft components, including various optoelectronic devices and window surfaces that must be protected against buildup of static electric charge. On Earth, such films useful on heat mirrors, optoelectronic devices, gas sensors, and automotive and aircraft windows.

Perez-Davis, Marla E.↗
NASA NTRS1987

Sputtered cadmium oxide as a surface pretreatment for graphite solid-lubricant films

Sputtered films of cadmium oxide were applied to sand blasted AISI 440C HT stainless steel disks as a surface pretreatment for the application of rubbed graphite films. Mixtures of cadmium oxide and graphite were applied to the nonpretreated sandblasted metal and evaluated. The results were compared to graphite films applied to other commercially available surface pretreatments. It is found that sputtered CdO pretreated surfaces increase the endurance lives of the graphite films and decrease the counterface steady state wear rate of the pins almost an order of magnitude compared to commercially available pretreatments. The CdO additions in general improved the tribological properties of graphite. The greatest benefit occurred when it was applied to the substrate rather than mixing it with the graphite and that sputtered films of CdO perform much better than rubbed CdO films.

Fusaro, Robert L.↗
DOE OSTI2024

Growth of Native Oxides of Niobium Thin Films for Superconducting Qubits with Etching Chemistry

Niobium thin films have been broadly applied in building superconducting qubits for quantum computing hardware. While improvements have been made by device engineering efforts, scaling the energy-sensitive quantum system requires materials study for further improvements. In this study, we performed XPS and ToF-SIMS analysis for Nb thin films across samples with different manufacturing techniques. By varying the air exposure time of the samples, this research comparatively investigates the chemical and depth profile of native oxides before and after the etching process. We observe a rapid logarithmic growth of oxide thickness across all samples and the dominant presence and growth of Niobium pentoxide in atomic percentage concentration on the surface. This comparative study provides insight into oxides mitigation strategies and correlation with qubits performance.

Lei, Zhicheng↗
DOE OSTI2024

Optical and microstructural studies of erbium-doped TiO 2 thin films on silicon, SrTiO 3 , and sapphire

Rare-earth ion doped oxide thin films integrated on silicon substrates provide a route toward scalable, chip-scale platforms for quantum coherent devices. Erbium-doped TiO 2 is an attractive candidate: the Er 3+ optical transition is compatible with C-band optical fiber communications, while TiO 2 is an insulating dielectric compatible with silicon process technology. Through structural and optical studies of Er-doped TiO 2 thin films grown via molecular beam deposition on silicon, SrTiO 3 , and sapphire substrates, we have explored the impact of polycrystallinity and microstructure on the optical properties of the Er emission. Comparing polycrystalline TiO 2 (rutile)/Si with single-crystalline TiO 2 (rutile)/r-sapphire and polycrystalline TiO 2 (anatase)/Si with single-crystalline TiO 2 (anatase)/SrTiO 3 , we observe that the inhomogeneous linewidth (Γ inh ) of the most prominent peak in the Er spectrum (the Y 1 –Z 1 transition, 1520 and 1533 nm in rutile and anatase TiO 2 ) is significantly narrower in the polycrystalline case. This implies a relative insensitivity to extended structural defects and grain boundaries in such films (as opposed to, e.g., point defects). We show that the growth of an undoped, underlying TiO 2 buffer on Si can reduce Γ inh by a factor of 4–5. Expectedly, Γ inh also reduces with decreasing Er concentrations: we observe a ∼2 order of magnitude reduction from ∼1000 ppm Er to ∼10 ppm Er. Γ inh then gets limited to a residual value of ∼5 GHz that is insensitive to further reduction in the Er concentration. Based upon the above results, we argue that the optical properties in these thin films are limited by the presence of high “grown-in” point defect concentrations.

Chemical elements↗
DOE OSTI2023

Elucidating the active phases of CoOx films on Au(111) in the CO oxidation reaction

Abstract Noble metals supported on reducible oxides, like CoO x and TiO x , exhibit superior activity in many chemical reactions, but the origin of the increased activity is not well understood. To answer this question we studied thin films of CoO x supported on an Au(111) single crystal surface as a model for the CO oxidation reaction. We show that three reaction regimes exist in response to chemical and topographic restructuring of the CoO x catalyst as a function of reactant gas phase CO/O 2 stoichiometry and temperature. Under oxygen-lean conditions and moderate temperatures (≤150 °C), partially oxidized films (CoO x<1 ) containing Co 0 were found to be efficient catalysts. In contrast, stoichiometric CoO films containing only Co 2+ form carbonates in the presence of CO that poison the reaction below 300 °C. Under oxygen-rich conditions a more oxidized catalyst phase (CoO x>1 ) forms containing Co 3+ species that are effective in a wide temperature range. Resonant photoemission spectroscopy (ResPES) revealed the unique role of Co 3+ sites in catalyzing the CO oxidation. Density function theory (DFT) calculations provided deeper insights into the pathway and free energy barriers for the reactions on these oxide phases. These findings in this work highlight the versatility of catalysts and their evolution to form different active phases, both topological and chemically, in response to reaction conditions exposing a new paradigm in the catalyst structure during operation.

Chen, Hao (ORCID:0000000337598352)↗
NASA NTRS2000

The Effect of Low Earth Orbit Atomic Oxygen Exposure on Phenylphosphine Oxide-Containing Polymers

Thin films of phenylphosphine oxide-containing polymers were exposed to low Earth orbit aboard a space shuttle flight (STS-85) as part of flight experiment designated Evaluation of Space Environment and Effects on Materials (ESEM). This flight experiment was a cooperative effort between the NASA Langley Research Center (LaRC) and the National Space Development Agency of Japan (NASDA). The thin film samples described herein were part of an atomic oxygen exposure experiment (AOE) and were exposed to primarily atomic oxygen (~1 X 1019 atoms/cm2). The thin film samples consisted of three phosphine oxide containing polymers (arylene ether, benzimidazole and imide). Based on post-flight analyses using atomic force microscopy, X-ray photoelectron spectroscopy, and weight loss data, it was found that atomic oxygen exposure of these materials efficiently produces a phosphate layer at the surface of the samples. This layer provides a barrier towards further attack by AO. Consequently, these materials do not exhibit linear erosion rates which is in contrast with most organic polymers. Qualitatively, the results obtained from these analyses compare favorably with those obtained from samples exposed to atomic oxygen and or oxygen plasma in ground based exposure experiments. The results of the low Earth orbit atomic oxygen exposure on these materials will be compared with those of ground based exposure to AO.

Connell, John W.↗
NASA NTRS1984

Ion-beam-textured and coated surfaces experiment (S1003)

The objective of this LDEF experiment is to measure the effects of exposure to the shuttle launch and near Earth space environments on the optical properties of ion beam textured high absorptance solar thermal control surfaces, the optical and electrical properties of ion beam sputtered conductive solar thermal control surfaces, and the weight loss of ion beam deposited oxide polymer films. The various types of surfaces to be tested include six major categories: (1) ion beam textured surfaces suitable for space solar thermal (solar concentration) application; (2) painted and/or state of the art solar thermal surfaces; (3) ion beam sputtered conductive coatings for thermal and space charge control (e.g., indium-oxide coated metalized FEP Teflon); (4) ion beam sputtered conductive coated solar sail materials for space charge control and cooling through emittance; (5) micrometeoroid sensitive samples whose optical properties change only as a result of micrometeoroid impact; and (6) Kapton coated with oxide polymer films to minimize oxygen degradation at near Earth orbit altitudes.

Mirtich, M. J., Jr.↗
DOE OSTI2025

Fabrication of nanoporous doped metal oxide coatings via selective infiltration of a block copolymer template: The case of Al-doped zinc oxide

Conductive nanoporous conformal coatings are important for various applications including touchscreens, displays, and electrochromic windows, though design of such coating with controlled porosity and composition remains challenging. We propose a sequential infiltration synthesis (SIS) method for the fabrication of nanoporous conductive aluminum-doped zinc oxide (AZO) films by infiltrating block copolymer (BCP) templates, specifically polystyrene-block-polyvinyl pyridine (PS-b-P4VP), with diethyl zinc and trimethyl aluminum precursors. Tunability of both porosity and electrical conductivity is achieved by precisely controlling the swelling behavior of the polymer templates and adjusting the number of SIS cycles. Further, our results reveal that porosity levels can reach up to 80 %, with resistivity as low as ~7.83 Ωcm. Using conductive atomic force microscopy (C-AFM) and Hall effect measurements, we show that lower concentrations of aluminum doping relative to zinc (around 1: 17) results in higher conductivity of the AZO films. Additionally, AZO is based on zinc oxide (ZnO) which is cost-efficient, abundant and less toxic than commonly used transparent conductive oxides such as indium tin oxide (ITO) and fluorine-doped tin oxide (FTO). Therefore, this novel approach opens new possibilities for creating highly porous, conformal, conductive AZO coatings with customizable porosity and composition, making them ideal candidates for diverse optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Optical and Plasmonic Properties of High-Electron-Density Epitaxial and Oxidative Controlled Titanium Nitride Thin Films

The present paper reports on the fabrication, detailed structural characterizations, and theoretical modeling of titanium nitride (TiN) and its isostructural oxide derivative, titanium oxynitride (TiNO) thin films that have excellent plasmonic properties and that also have the potential to overcome the limitation of noble metal and refractory metals. The TiNO films deposited at 700 °C in high vacuum conditions have the highest reflectance (R = ~ 95%), largest negative dielectric constant (ε 1 = –161), and maximal plasmonic figure of merit (FoM = –ε 1 /ε 2 ) of 1.2, followed by the 600 °C samples deposited in a vacuum (R = ~ 85%, ε 1 = –145, FoM = 0.8) and 700 °C–5 mTorr sample (R = ~ 82%, ε 1 = –8, FoM = 0.3). To corroborate our experimental observations, we calculated the phonon dispersions and Raman active modes of TiNO by using the virtual crystal approximation. From the experimental and theoretical studies, a multilayer optical model has been proposed for the TiN/TiNO epitaxial thin films for obtaining individual complex dielectric functions from which many other optical parameters can be calculated. The advantages of oxide derivatives of TiN are the continuation of similar free electron density as in TiN and the acquisition of additional features such as oxygen-dependent semiconductivity with a tunable bandgap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗