Search NASA⌕ Search

SEARCH · Search NASA

Results for “Oxide Reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Synthesis of superconducting freestanding infinite-layer nickelate heterostructures on the millimetre scale

The development of superconductivity in infinite-layer nickelates through hole-doping relies on the controlled synthesis of Ni in a high oxidation state, followed by topotactic reduction to a very low oxidation state. So far, superconductivity has been realized only in epitaxial thin films. Here, in this work, we integrate these techniques with heterostructures that include an epitaxial soluble buffer layer, enabling the release of freestanding (Nd,Sr)NiO 2 heterostructures. The released heterostructures exhibit comparable structural and electronic properties to those of optimized thin films, with lateral dimensions ranging from millimetres to ~100 μm, depending on the degree of strain released with respect to the initial substrate. The changes in the superconducting transition temperature upon release of the heterostructure mirror those reported for variations in substrate and pressure, suggesting a common underlying response to strain in the infinite-layer nickelate superconductivity. These freestanding structures will facilitate a range of experimental studies without the constraints of substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Tellurium Goes for a Ride on the “Ferrous” Wheel: Interactions of Te(VI) and Te(IV) with Fe(II)-Bearing Minerals

Compared to more abundant metalloids (e.g., As, Se, and Sb), little is known regarding the biogeochemistry of tellurium (Te), a critical metal whose use in CdTe photovoltaic solar cells is driving increasing global demand for this element. In this study, to understand the redox behavior of Te under ferrugenic/sulfidogenic conditions, we examined the potential for reduction of Te(VI) and Te(IV) in aqueous suspensions containing Fe(II) as siderite, vivianite, green rust, magnetite, or mackinawite; Fe(II)-bearing minerals which are often formed during microbial reduction of Fe(III) oxides. In the mackinawite systems, complete reduction of Te(VI) or Te(IV) to Te(0) was observed within 12 h, and near complete reduction (>90% Te(0)) was observed within 2.5 days in the green rust systems. In the presence of siderite, complete reduction of Te(VI) or Te(IV) to Te(0) occurred within 60 days. We observed >60% reduction of Te(VI) to Te(IV) within 2.5 days in the magnetite system, but Te(0) did not form until 120 days; however, complete reduction to Te(0) was observed within 120 days when starting with Te(IV). With vivianite there was >80% reduction of Te(VI) to Te(IV) within 12 h, without further reduction to Te(0) over the duration of the experiment (120 days); in the Te(IV)-vivianite system, there was no evidence of Te(IV) reduction within 120 days. The reduction of Te(VI) and Te(IV) in soils and sediments has been largely attributed to direct reduction by microbes; however, the reduction of Te(VI) and Te(IV) by Fe(II)-bearing minerals suggests that abiotic or coupled biotic-abiotic processes may also play a critical role in Te redox chemistry in natural and engineered environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thiol- and Disulfide-Functionalized Polycyclooctene: Metathesis Polymerization, Degradation, and Reformation

The enormous global production and use of polymers and plastics, combined with slower and less efficient disposal and recycling methods, have led to a worldwide growth in plastic waste. Here, we describe an approach that builds degradability into macromolecular polyolefins through the design of telechelic oligomers with reactive functional groups that enables control over polymer deconstruction and reconstruction. Our work exploits disulfide-containing polymers that have emerged as promising cyclable materials due to their dynamic reversibility (bond formation and cleavage) driven by redox chemistry under mild conditions. Specifically, we describe the synthesis of a telechelic α,ω-dithiopolycyclooctene (PCOE) by ring-opening metathesis polymerization using a dithioacetate chain transfer agent, followed by deprotection to convert the chain-end thioacetates to thiols. This process was studied towards control over the degree of oxidation to yield disulfide-containing PCOE, followed by an evaluation of reductive degradation and oxidative repolymerization. Overall, this approach facilitates the production of disulfide-containing unsaturated polyolefins and the integration of degradable and reformable moieties into soluble, processable, metathesis-derived polymers.

Lee, Kyoungwon↗
DOE OSTI2022

Design and characterization of surface molecular assemblies for the preparation of solar fuels

A key issue in solar energy conversion is the utilization of solar energy for the preparation of solar fuels. In this area, artificial photosynthesis offers promising approaches for the conversion of H 2 O and CO 2 into usable solar fuels. This review highlights both the design and characterization of surface molecular assemblies for the preparation of solar fuels. It includes mechanistic summaries of the details of the underlying surface chemical reactions including water oxidation and proton/water reduction. The surface mechanisms are shown to integrate molecular reactivity with surface electron transfer in integrated assemblies that lead to impressive efficiencies for water oxidation and proton or CO 2 reduction.

catalysts and catalysis↗
DOE OSTI2020

Sandwich gasification process for high-efficiency conversion of carbonaceous fuels to clean syngas with zero residual carbon discharge

The present invention discloses a gasifier and/or a gasification process that provides a long, uniform temperature zone in the gasifier, regardless of the particle size, chemical composition, and moisture content of the fuel by sandwiching a reduction zones between two oxidation zones. The gasifier and/or gasification process has a char that is more energy-dense and almost devoid of moisture that affords for an additional (or char) oxidation zone with a temperature that is higher than a first oxidation zone which is closer to a evaporation and devolatilization zone. As such, the additional (or char) oxidation zone contributes to augmenting the reduction zone temperature, thereby providing a favorable dual impact in improving syngas composition and near-complete conversion of the tar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High-efficiency oxygen reduction to hydrogen peroxide catalyzed by oxidized carbon materials

Improved electrochemical production of hydrogen peroxide is provided with a surface-oxidized carbon catalyst. The carbon can be, for example, carbon black or carbon nanotubes. The oxidation of the carbon can be performed, for example, by heating the carbon in nitric acid, or by heating the carbon in a base. The resulting carbon catalyst can have a distinctive oxygen is peak in its X-ray photoelectron spectrum.

Cui, Yi↗
DOE OSTI2022

Sandwich gasification process for high-efficiency conversion of carbonaceous fuels to clean syngas with zero residual carbon discharge

The present invention discloses a gasifier and/or a gasification process that provides a long, uniform temperature zone in the gasifier, regardless of the particle size, chemical composition, and moisture content of the fuel by sandwiching a reduction zones between two oxidation zones. The gasifier and/or gasification process has a char that is more energy-dense and almost devoid of moisture that affords for an additional (or char) oxidation zone with a temperature that is higher than a first oxidation zone which is closer to an evaporation and devolatilization zone. As such, the additional (or char) oxidation zone contributes to augmenting the reduction zone temperature, thereby providing a favorable dual impact in improving syngas composition and near-complete conversion of the tar.

Patel, Nikhil Manubhai↗
DOE OSTI2023

Sandwich gasification process for high-efficiency conversion of carbonaceous fuels to clean syngas with zero residual carbon discharge

gasifier and a gasification process provides a long, uniform temperature zone in the gasifier, regardless of the particle size, chemical composition, and moisture content of the fuel by sandwiching a reduction zones between two oxidation zones. The gasifier and gasification process produces a char that is more energy-dense and almost devoid of moisture, affording an additional (char) oxidation zone with a temperature that is higher than a first oxidation zone which is closer to an evaporation and devolatilization zone. As such, the additional (char) oxidation zone contributes to augmenting the reduction zone temperature, providing a favorable dual impact in improving syngas composition and near-complete conversion of the tar.

Patel, Nikhil Manubhai↗
DOE OSTI2021

Transformation of Highly Stable Pt Single Sites on Defect Engineered Ceria into Robust Pt Clusters for Vehicle Emission Control

Engineering surface defects on metal oxide supports could help promote the dispersion of active sites and catalytic performance of supported catalysts. Herein, a strategy of ZrO 2 doping was proposed to create rich surface defects on CeO 2 (CZO) and, with these defects, to improve Pt dispersion and enhance its affinity as single sites to the CZO support (Pt/CZO). The strongly anchored Pt single sites on CZO support were initially not efficient for catalytic oxidation of CO/C 3 H 6 . However, after a simple activation by H 2 reduction, the catalytic oxidation performance over Pt/CZO catalyst was significantly boosted and better than Pt/CeO 2 . Pt/CZO catalyst also exhibited much higher thermal stability. The structural evolution of Pt active sites by H 2 treatment was systematically investigated on aged Pt/CZO and Pt/CeO 2 catalysts. With H 2 reduction, ionic Pt single sites were transformed into active Pt clusters. Much smaller Pt clusters were created on CZO (ca. 1.2 nm) than on CeO 2 (ca. 1.8 nm) due to stronger Pt-CeO 2 interaction on aged Pt/CZO. Consequently, more exposed active Pt sites were obtained on the smaller clusters surrounded by more oxygen defects and Ce 3+ species, which directly translated to the higher catalytic oxidation performance of activated Pt/CZO catalyst in vehicle emission control applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A highly oxygen reduction reaction active and CO 2 durable high-entropy cathode for solid oxide fuel cells

One big obstacle for the oxygen reduction reaction (ORR) electrode in solid oxide fuel cells (SOFCs) is the poor reaction activity and fast degradations caused by CO 2 poisoning. Here, in this study, we report our design of an active A-site Ca-rich high-entropy Pr 0.1875 Ba 0.1875 Sr 0.1875 La 0.1875 Ca 0.25 CoO 3-δ (PBSLC 25 C) electrode, guided by the O p-band theory. Here, when applied as a cathode in solid oxide fuel cells (SOFCs), it demonstrates high ORR activity and excellent CO 2 tolerance under realistic operating conditions. Ni-YSZ-based anode-supported cells with PBSLC 25 C cathodes demonstrate excellent peak power densities of 1.14 W cm -2 , 1.04 W cm -2 , and 0.77 W cm -2 in the air with 1%, 5%, and 10% CO 2 , respectively, at 750 °C. The engineered high-entropy PBSLC 25 C effectively diminishes the CO 2 poisoning effect and maintains active surfaces for fast oxygen exchange, as confirmed by the cell durability test in air containing CO 2 (5 and 10 vol%), Raman spectroscopy, and density functional theory calculations.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Photosynthesis | Photosynthetic Carbon Dioxide Fixation

Carbon dioxide is reduced to make the molecules of life such as proteins, lipids, carbohydrates, and nucleic acids and as the primary mechanism of energy storage for the biosphere. Reduction of fully oxidized carbon, carbon dioxide, occurs following carboxylation of preexisting molecules rather than direct reduction of carbon dioxide to formic acid or formaldehyde. Furthermore, the primary pathway is called the Calvin Benson cycle and proceeds mostly as a series of gluconeogenic (reversal of glycolytic) reactions plus a few pentose phosphate pathway reactions.

Aldolase reaction↗
DOE OSTI2025

Microwave-driven synthesis and modification of nanocarbons and hybrids in liquid and solid phases

Over the past 20 years, nanocarbons have become more significant as nanostructured fillers in composites and, more recently, as functional elements in a brand-new class of hybrid materials. Microwave-assisted synthesis and processing is a burgeoning subject matter in materials research with significant strides in the realm of nanocarbon during the last decade. Here, the review examines recent approaches to producing various nanocarbons using microwaves as energy sources, the characterization of such materials for various applications, and their results. The underlying factors supporting the increased performance of such materials or their composites are analyzed and reaction mechanisms are presented wherever necessary. In particular, the recently developed and verified approaches to produce porous carbon materials, CNTs and fibers, carbon nanospheres, carbon dots, CQDs, reduced graphene oxide, nanocarbon hybrid materials, and the purification and modification of CNTs are discussed. The reduction of graphene oxide and the preparation of graphene derivative hybrids using solid-state and liquid-state routes such as polyopl, mixed solvents, ionic liquids, and microwave-assisted hydrothermal/solvothermal methods are analyzed in detail. In addition, the principles of microwave heating in liquid and solid states, the use of metals particles as arcing agents or catalysts, and carbonaceous materials as internal or external susceptors during synthesis and modifications are presented in detail.

25 ENERGY STORAGE↗
DOE OSTI2021

Temperature dependence of nitrate-reducing Fe(II) oxidation by Acidovorax strain BoFeN1 – evaluating the role of enzymatic vs. abiotic Fe(II) oxidation by nitrite

ABSTRACT Fe(II) oxidation coupled to nitrate reduction is a widely observed metabolism. However, to what extent the observed Fe(II) oxidation is driven enzymatically or abiotically by metabolically produced nitrite remains puzzling. To distinguish between biotic and abiotic reactions, we cultivated the mixotrophic nitrate-reducing Fe(II)-oxidizing Acidovorax strain BoFeN1 over a wide range of temperatures and compared it to abiotic Fe(II) oxidation by nitrite at temperatures up to 60°C. The collected experimental data were subsequently analyzed through biogeochemical modeling. At 5°C, BoFeN1 cultures consumed acetate and reduced nitrate but did not significantly oxidize Fe(II). Abiotic Fe(II) oxidation by nitrite at different temperatures showed an Arrhenius-type behavior with an activation energy of 80±7 kJ/mol. Above 40°C, the kinetics of Fe(II) oxidation were abiotically driven, whereas at 30°C, where BoFeN1 can actively metabolize, the model-based interpretation strongly suggested that an enzymatic pathway was responsible for a large fraction (ca. 62%) of the oxidation. This result was reproduced even when no additional carbon source was present. Our results show that at below 30°C, i.e. at temperatures representing most natural environments, biological Fe(II) oxidation was largely responsible for overall Fe(II) oxidation, while abiotic Fe(II) oxidation by nitrite played a less important role.

Microbiology↗